THANK YOU so much for this video. I picked up the same sander (Model 9910) which was heavily used so I decided to check the internals and didnt notice part #65 as it fell out. Its been 3 days and I still couldnt figure out how it goes back in until this video. THANK YOU!!!!!!
Spring 54 goes inside part 50 (in the corner above screw 51) to push against the edge of part 57 to keep the whole tension roller assembly pushed towards the main body of the machine.
Thanks this helped me not throw away my belt sander and spend money I don't have on a new one.
Нет, ну с тисками-то даже ребенок сможет😂
А видос зачетный - поможет любому увлёкшемуся - спасибо!
Автору - скорейшего выздоровления!✊
THANK YOU so much for this video. I picked up the same sander (Model 9910) which was heavily used so I decided to check the internals and didnt notice part #65 as it fell out. Its been 3 days and I still couldnt figure out how it goes back in until this video. THANK YOU!!!!!!
Чувак захлёбывается соплями, но не сдаётся)
Thank you man for that little part... I broke my head for that🤦🏻♂️
Спасибо за видео, оно очень помогло разобрать данный аппарат. Надеюсь я смогу собрать обратно то что разобрал :)
Thanks! This showed me how to remove the pulley assembly.
Is it necessary to grease tension roller? Thank you for this video!
Thanks, I couldn’t figure out where that little clip went.
Спасибо за видео, все ясно и понятно, отличное видео, другие разбирают в обратной последовательности так, что ни чего не разбирается.
very helpful thank you
I took mine apart to remove a jammed belt, but after I put it back together the belt keeps slipping off - where did I go wrong?
this great video save me a lot of money. thanks
Mine is the 9910 model. It should take apart the same way. 😅
great video well presented. has helped me out a lot many thanks.
tengo hilti te40 avr desmontada y no lose montala gracias champion
I find expensive 57 euros for just a few non-complex pieces. Considering that brand new belt sander it costs aprox 90 euros
Great video tho. Thank you for it!
Thank you bro. You save me.
Санёк переводи давай,ты видно шпрехаешь.😁
спасибо
На здоровье!!Ты хоть понял что?😁
how old the grinder is
the carbon brush is CB 411 ?
Спасибо, единственное видео где нашел как именно в этой модели заменить щетки ротера.
Hi, and where is spring nr. 54? I do not know where to place it.
Spring 54 goes inside part 50 (in the corner above screw 51) to push against the edge of part 57 to keep the whole tension roller assembly pushed towards the main body of the machine.
Спасибо дружище! Жалко не по русски.
hola como conseguer un diagrama de hilti te 40avr orgente mucha gracias
3, 29 Name