Thank you for this awesome review, I just got this AMP because of you and I have to say it blew me away. It packs so much in such a little package. Also I have a $350 JBL Bluetooth speaker and this AMP puts it to shame, the music has more definition and bass is amazing and not to mention is way louder. I am very happy with this AMP 10/10
@@archiearche3406 I know you asked this a while back, but the answer is no. The settings on the thr10 only affect the guitar tone. For Bluetooth you can only adjust the volume.
Yamaha has a great ideology. They only make things they are passionate about. They could manufacture many other goods and make a lot more money but they only build things they care about
Argh ... how can you introduce this amp, make a 10-minute video-demo about this amp, have a bassguitar right next to you and not talk about the very special feature the THR 10II has? I mean how is it, a box, well its speakers respectively, this small can take these frequencies? What does it sound like?
I'll have to make a video where I'm playing bass through the THR, great suggestion. It's hard to fit everything I want to do into one video. Thanks for watching anyways!
Hi Drew. I just got the THR30ii and absolutely love it, one of the best sounding small amps I've ever heard. However, I'm not having such great luck when trying to record with it. I downloaded the latest audio drivers from the THR30ii page, and installed Reaper, of which I haven't used in years - just getting back into guitar after a 5 year break. I notice when I record with it, the input levels are very low, though I have the USB out turned up very high in the Yamaha app. I noticed the recorded guitar tone sounds very thin and not very "present", like it's sort of in the background. Also, when I render the tracks, the output volume is very low, I have to crank it way up. I'm also noticing some crackling sounds occasionally, as it's monitoring the recording. I don't think anything is wrong with the amp, because everything else is working flawlessly. Is there something that a noob like me should be checking on? Thank you for any assistance you may be able to provide. I'm very new to recording, so I have a feeling I have something setup wrong. Also, I made sure to get the inputs to about 3/4 way showing, and I'm trying to record the wet signal directly, without applying any effects. Thank you kindly.
@@seanthebean2 It was noob error, lol. I was mistakenly recording in stereo if I recall correctly, effectively cutting the volume in half. I don't think it's been an issue since, but I do tend to go through an audio interface most of time, so I'm not really sure.
Hey there, thanks for your comment. I've only recorded with the THR a couple times with Cubase LE. I don't have any experience with Reaper, but I hear it works well. My suggestion would be to try using the free version of Cubase that came in the box with your THR. They may work better together. I think it's worth a try. Otherwise, I think for the best results an interface with an SM57 is a tried and true method, even if you're recording a small amp like the THR, you can isolate the amp with blankets or sound proofing material. Try putting the amp in your closet, and once you get the sweet spot, you're set to record some awesome stuff! That's just what I would do, but theres a ton of great ways to record these days. Best of luck and thanks for watching 🤘
I know in GarageBand, a lot of people make the mistake of choosing the "guitar" input, which routes your guitar through the built-in amp modelers. Choosing the mic input allows you to get sounds from your THR.
Whenever I record my bass using this amp, the sound ends up completely different than the one I hear. Is it because i'm recording with a Mono instrument cable instead of a stereo one? I plugged the THR with a midi cable and into my laptop for audacity.
@@DrewCreal Thanks for the feedback! Your tip contributed on my personal research and I found out that I didn't install the yamaha thrii driver on my desktop. Everything works now :)
Hows the round trip latency on this thing when playing back through a DAW? Im a bedroom guitarist and im looking for either a multi fx board to be able to switch on effects on the fly when im playing or something like this, but the effects seem limited with this amp. Its quite impressive nonetheless, but just weighing all my options.
Does anyone know how to use user memory button without remote app on thr10ii wls? I tried switching clean, lead, high-gain etc. knub consecutively, but i cannot hear anything!
Have you tried using the 5 preset buttons on the top of the amp to save your tones? That's probably the best way to change sounds on the fly. There are also several Bluetooth controller devices that you can use as well, like the XSonic Airstep YT.
Tried the THR10II and it was ok the high gain sound was great but it wasn’t loud enough for me. I wish the THR30II was priced a bit more reasonable will probably just get Spark 2.
Nice review. I have a the original cream THR and I would love to use my iPad for recording. Will this act as a interface with iPad? GarageBand or cubasis is a option as well. 2nd question, are the amps the same sounding as all the originals? Might be an upgrade option if it works on iOS. Thank you
1. You can record on your iPad with these, you just need the proper cable. The software is even included in the box when you buy one. 2. The amps sound similar, but the speakers have been upgraded. There are also way more tones with the new amp.
Thanks for the Video. Nice playing also. I have a few questions if you don't mind. The difference between the 10 and 30, just more volume or is there other things to it. Also, these compared to the Spark. Thanks so much again.
With the THR30ii you get stereo 1/4" outs on the back. So, you can use this amp in a live situation which is really cool. There are also a few companies that make a bluetooth channel changer which is sweet. I have not had a chance to play the spark yet, but in general, I'm not a fan of Bias products.
The 30 also has a rechargeable battery and a built in wireless receiver and I believe you have to use the line 6 wireless transmitter. The 10 has the same amps and tone setting as the 30 but the ones on the 30 can be switched on the amp and the on the 10 you have to use the app to switch between the various amp models. The original thr10 had 3 models and the Thr 2 has all three. I used to have the spark but I returned it. To me the Yamaha sounds like a real amp and the spark sounded like a plug in.
Hi, great video! I was wondering if anyone knows how this amp responds to guitar pedals? - looking to get one, but might be a deal breaker if it doesn't work well with my pedals. Thanks!
That may actually be my next video on this amp, thanks for your question. There's a few different ways that you can use pedals with this amp and I'm looking forward to seeing how it sounds.
Hi Drew, I've just bought this amp, it's brilliant. One thing I would like to ask is when I connect my mobile phone via Bluetooth and play some music,I noticed that you cannot adjust the sound on the amp by using the bass treble or midrange knobs. Is this correct,or am I doing something wrong? Regards Ronnie.
I thought modelers were all 1000s of dollars, but this is a spectacular looking and sounding amp for less than 400. The wireless one is 450, which is 150 more than the wired version, but i guess youre also getting what is essentially a large portable bluetooth speaker, which is pretty sweet.
I think this is cool for anyone who doesnt own a PodHd or Helix. I have both and cant find a reason to get it. Idk maybe ill find me a personal reason later on
Hi, a question I have is playing music from your paired phone. I connected to Bluetooth and then to the app, but music still comes from my iPhone. Thank you for your time!
Double check and make sure you are connected. Make sure no other devices are connected to the amp. If that doesn't work, "forget device (THR)" and try establishing a new connection.
@@DrewCreal Thanks! For me the fix was realizing that there are two bluetooth names for the THR. One is for the app and one is for the actual amp too. That cleared a lot of confusion for me!
I love it! I was expecting to have to use the headphones jack to not torture my roomates as I go through the beginner phase of learning to play guitar but I can get the tone I like without having to get the amp too loud. I rarely use my headphones. This thing is ugly but aside from looks it's the perfect practice amp for me.
When using it as an Bluetooth speaker can you use the inbuilt eq ( low/treble/mid ) to edit the sound ? I have a vinyle player and If this Yamaha thing can equalise the audio I am sold
With the THR you don't get a full EQ for the Bluetooth functionality. I believe there is a flat EQ or bass boosted option. I'm not sure this would be the best option for a Vinyl player. I would look into getting a phono preamp, power amp and speakers for a nice vinyl turntable.
I have major issues with the Bluetooth control connection. It disconnects from my iphone or iPad, shortly after connecting. Can’t keep a connection. USB works consistent though. Other than that, I m very happy.
That sounds frustrating, maybe try updating the firmware on the amp, and download the newest version of the app, also update your iPad and you should be good.
Unfortunately the current app release on iOS is broken, at least on my iPad. Works fine on my android phone instead. I guess they’ll fix the app shortly, everybody is writing it doesn’t work on the App Store reviews.
You can definitely use a normal cable with the wireless thr models. I actually had a problem with my first Line 6 G10T transmitter and had to send it back. The second one has been working fine so far.
Looks like I'm playing Gsus4 moving some notes around on the B string, then moving the same notes around within the C2 chord. Hope that helps 👍thanks for watching
Hi Drew. I bought a THR30II WIRELESS almost 4 years ago but only used it for about an hour then put it away. I was more into my THR100HD stereo setup at the time but would like to get that THR30II back out and take advantage of its wireless convenience. I was going to buy a ElectroPhonic guitar with built-in amp/speakers but remembered that i had this in my closet! One really dumb question: I can't plug the wireless dongle into a pedal then use a cable from the pedal into the amp, correct?
The THR100 sounds really cool. If I remember correctly that amp has stereo capabilities right? If you get the Line 6 G10 wireless unit you can only use the amp directly from your guitar. If you want to play wirelessly with pedals I would recommend the XVive U2 system because you get a transmitter and receiver. I have a video to this below for you if you want to check it out. th-cam.com/video/iFTI2mOV6xA/w-d-xo.htmlsi=Zy_bK6IWqp7WjiO0
Nicely done. Might be time to get rid of the pedal board and amp, downsize, and give the wife and neighbors a break. BTW, awesome Carvin. I had them build me one and I couldn't be more pleased.
The Yamaha thr10 has become my main home amp. Sold my Classic 50 tube amp and packed my pedal board away, and I don’t miss either. More than happy with this little box for home use.
Kiesel/Carvins are great! I'm hoping to order a new one soon. Check out my video where I'm messing around with their virtual builder, fun stuff! th-cam.com/video/a1D5N-tKs2E/w-d-xo.html
You can plug the Yamaha THR30W into a mixer and then you can get an XSonic AirStep to control the presets if you're interested in controlling the amp with your feet!
@@DrewCreal Just wondering, how would it sound if you were running a backing track and playing with overdrive on? My blackstar has trouble playing overdrive over a clean tone, things get a bit muddy lol.
@@DrewCreal , hi, bought it and really enjoying it. It’s a great all rounder. The app is working flawlessly. Many thanks for making the time to do the video.
You can use the amp the way that you described here. It could be a temporary solution to record guitar and vocals, but I probably would get an interface at some point for the best possible results.
There is an acoustic setting on these amps, it sounds great with a little bit of chorus and reverb if you play an acoustic/electric guitar. There is also a new version of the THR that has a built in XLR input for simultaneous guitar/vocal use. It's called the Yamaha THR30iiA. Pretty cool amp if dream of playing coffee house, small club and street corner gigs.
I use this amp now about 6 months, after I had several THR 10's. Very happy with it, but there's one problem, the THR remote app....Connecting the amp for playing backing tracks on your Android tablet or phone is no problem, that works flawless, but connecting / syncing the THR Remote app with your Android device doesn't work so far. On laptop/ PC no problem at all, but as I am mostly working "on the road" it would be nice to make changes in a mobile way without unpacking my laptop everytime....anyone can help ?? UPDATE: Problem solved...If they had written that the amp should have been totally stand alone... still had the USB cable connected to the PC ( but not the Remote app launched, not even the PC on). But I still wonder WHERE the presets are saved on your mobile device. Within the app ??
I think your electric fiddle would sound fantastic. I've already convinced one violinist to buy a THR. My recommendation would be to get one of the wireless models so that you can move around more freely when you play.
Hi. I connected my Thr10II to my Pc and messed around with the effects. Now the Thr10II has weird sound in the background (noises like when you turn up gain). Is there any way to resets the effects to the effects setting from factory ? Please help me out.
I love this amp i just found out about a "boosted stereo" mode if you hold down the the tuner it puts a little octothorpe (#) next to the tuner window and sounds incredible with the effects, i played the amp for 5 months before i found it. also you can drastically alter the way the amp simulation responds with the master volume, and guitar knob; for example you can dime one of the knobs and use the other as the master or vice versa and it massively changes the note attack and bloom its like comparing Vanhalen 1 to Ponrograffiti using the modern and classic modes its fucking wild.
@@DrewCreal I just noticed how good your direct recording sounds through my monitors, the stereo chorus sounds great on my end. I havent even tried direct recording yet omg fantastic!
This would be rather clumsy amp if you wanted to do small gigs with it. You'd need a footswitch at least to change between lead and rhytm sound for example or any preset sounds for particular songs which possibility this does not seem to have ?
I don't think this is possible with the THR, but is there a way you can record both the guitar AND the output coming from PC sound card? No matter what way I wire or set Input/Output devices it only records the actualy guitar signal, and not the signal coming from the PC INTO the THR's AUX input...
This is THE most common question about this amp, this is what the amp was made for, jamming along to songs and practicing, all in one cool looking box! Thanks for checking out the video!
There is an acoustic setting on the amp and it sounds pretty good, I've used it a few times. There is however a THR30A model that is made specifically for acoustic guitar. It also has a built in XLR input for a microphone so you can play both your guitar and sing simultaneously. Hope that helps!
I can not make connection with the amp and smartphone. Do not know why? Green light is solid but no interaction with the knob images and the amp. Symbol is flashing in my phone.
Just got mine and I have the same problem, gonna update the amp maybe that helps. It that doesn't work I'll most likely end up just connecting it directly to my laptop
I also managed to make some activity between. Sometimes the connection has difficulties to build up and takes more than one hour or can not be built at all (can not wait longer).
It's primarily a desktop combo amplifier. Think of a mixture between having a bluetooth soundbar and a guitar amp with FX. If you get the 30 watt version you could probably use it as an amp head and run it straight into the sound board.
@@DrewCreal thanx for the awnser, had no clue these type of amps existed you learn something new every day. Can you run in trough a cab? Does it take pedals? Does it have an fx loop? It does sound interesting
Hi really cool demo. Any idea if I can connect and use my bluetooth headphones on this at the same time as my phone is connected via bluetooth for music playback? Not sure how I will be able to pair this with my headphones as I would on my phone or PC because there is no display to confirm the pairing? Thanks in advance - Mark
You may have to use chorded headphones with the setup you mentioned. I think the THR can only connect one bluetooth device at a time. I have some wireless headphones. I'll have to try that sometime soon. If you figure it out, please hit me up and let me know! Thanks for watching!
nice video, thank you. At arroud the 2 min mark you are using a fairly nice clean sound, in the video it seems that you have set gain to max. could you please share the settings for clean with us, this is whre I struggle a bit - thank you in advance
For this amp, where the gain, or any knob is makes no difference for the presets. If you touch the knob after selecting the preset then you turn it on and can change the sound
You would not be able to bluetooth connect to a PA, but the THR30W version has stereo 1/2'' outputs on the back. Pan that hard Left and Right on your PA and I think you'd have a great sound.
"Thanks! For me the fix was realizing that there are two bluetooth names for the THR. One is for the app and one is for the actual amp too. That cleared a lot of confusion for me!" -From a comment above
@@electropentatonic thanks for the answer! It took my also a while to understand there are two yamahas. My issue is thay whenever I connect them, one of them looses the connection. For instance I cant use the remote app when Im connected to it as a speaker and the other way around
I can't get cubase to work with thrii. Input MIDI's seem right. Very frustrated. I am new to recording environment and a Windows guy. How did you map your MIDI inputs? I'm stuck.
Hey Robert, I can't say that I had any issues connecting my THR via USB and using it as an interface. Your computer should recognize the THR when you plug it in. I'm sorry, I wish I could be of more help to you. Maybe I will make a video using the THR as an interface soon.
I have a THR 30W and I've used it as a Bluetooth speaker several times while camping. The wireless feature is really useful for when you're practicing. You can move the amp around the room. I really enjoy having this option but it's not crucial, don't let it stop you from getting a THR10ii, they're a little cheaper.
@@DrewCreal thanks! I am interested in both these options, since I have some weird noise issue at home when playing guitar and I recently discovered that if I play via wireless system or with battery amp, this noise is completely gone! I checked for all possible ground loops etc, but no solution was found so far rather than wireless or batteries. So I now started to look for the best possible solution that have these options. This Yamaha looks good, sounds good, have cool functions. Probably will make myself a present.
Does the THR play guitar through both speakers? Because I tried already 2 THRs 30 II and I got impression, that guitar plays only through LEFT speaker of THR amp - can anyone confirm?
My teacher made me buy this one ! can't wait to receive it, by the way, i often see that thing that is placed after the nut of your guitar, what is this ?
Your teacher made a great amp recommendation for you! I'm using a gruv gear fret wrap. Sometimes I use this when I'm recording solo work in the studio. Adds a little continuity to my different instruments as well. Cheers my friend!
THR30 II has 2 flaws : 1) Choose some factory preset, go to the tuner, leave the tuner - you're no more on this factory preset. 2) Guitar and Audio volume knobs do nothing for LINE outputs - this is some major drawback.
@@darinsteele7091 it's not about that. It's about that you pay lot of money for device with flaws. Next thing. Take echo knob. On my THR30 when you turn it clockwise to almost halfway of echo range, nothing happens. If you have an app, observe how echo mix starts from 19% or similar value, when you use the knob. With the knob you also can't set the mix of echo to 100%
@@graycolors2879 with my THR10-II, the FX will kick in a little less than a quarter, i had to listen very carefully to pick it up. I don't know why they did that, just the way it's designed I guess, kind of annoying I didn't really pay attention before.
I gave up at 1 minute. Why does there have to be a background sound ? I just wanted to hear about the amp. Seems a lot of people feel the need to add a sound track. Doesn't work for me.
I love my THR10ii. I just wish Yamaha had more of a community to share and download tones like some of the other digital amps.
I would check out the Yamaha THR facebook group, lots of helpful information in there. I also wish the tone could become more shareable.
I also haven't been able to figure out how to download patches or tones. It's not super friendly in that respect
hey all, your pc won't recognize it until you download Cubase driver.
Thank you for this awesome review, I just got this AMP because of you and I have to say it blew me away. It packs so much in such a little package.
Also I have a $350 JBL Bluetooth speaker and this AMP puts it to shame, the music has more definition and bass is amazing and not to mention is way louder.
I am very happy with this AMP 10/10
I totally agree, this is such a great product. I had a $200 Ultimate Ears speaker and the THR was obviously better for many reasons.
would the amp's preset affect the music that's streaming through?
@@archiearche3406 I know you asked this a while back, but the answer is no. The settings on the thr10 only affect the guitar tone. For Bluetooth you can only adjust the volume.
@@archiearche3406 no you set it to the FLAT setting so it rounds out the sound as a regular would
Yamaha has a great ideology. They only make things they are passionate about. They could manufacture many other goods and make a lot more money but they only build things they care about
Argh ... how can you introduce this amp, make a 10-minute video-demo about this amp, have a bassguitar right next to you and not talk about the very special feature the THR 10II has?
I mean how is it, a box, well its speakers respectively, this small can take these frequencies? What does it sound like?
I'll have to make a video where I'm playing bass through the THR, great suggestion. It's hard to fit everything I want to do into one video. Thanks for watching anyways!
Does anyone know the difference in sound quality when recording from the headphone jack vs. say the audio outs on the thr30ii.
To be honest, I don't know, would be worth a try to experiment.
Sabes, si se puede hacer grabaciones con otro daw programa que no sea Cubase otro como Reaper...?
Yes you can, you will just plug in via USB, download the Yamaha driver and choose the THR as your input/output for recording.
Thank you. I hope Yamaha took care of you for this comprehensive review. Good stuff, man.
Thanks for the kind words, I haven't heard anything from Yamaha about this video, they are a really large company.
Hi Drew. I just got the THR30ii and absolutely love it, one of the best sounding small amps I've ever heard. However, I'm not having such great luck when trying to record with it. I downloaded the latest audio drivers from the THR30ii page, and installed Reaper, of which I haven't used in years - just getting back into guitar after a 5 year break. I notice when I record with it, the input levels are very low, though I have the USB out turned up very high in the Yamaha app. I noticed the recorded guitar tone sounds very thin and not very "present", like it's sort of in the background. Also, when I render the tracks, the output volume is very low, I have to crank it way up. I'm also noticing some crackling sounds occasionally, as it's monitoring the recording. I don't think anything is wrong with the amp, because everything else is working flawlessly. Is there something that a noob like me should be checking on? Thank you for any assistance you may be able to provide. I'm very new to recording, so I have a feeling I have something setup wrong. Also, I made sure to get the inputs to about 3/4 way showing, and I'm trying to record the wet signal directly, without applying any effects. Thank you kindly.
I heard that this was fixed with an update. Have you been able to get this fixed?
@@seanthebean2 It was noob error, lol. I was mistakenly recording in stereo if I recall correctly, effectively cutting the volume in half. I don't think it's been an issue since, but I do tend to go through an audio interface most of time, so I'm not really sure.
Hey there, thanks for your comment. I've only recorded with the THR a couple times with Cubase LE. I don't have any experience with Reaper, but I hear it works well. My suggestion would be to try using the free version of Cubase that came in the box with your THR. They may work better together. I think it's worth a try. Otherwise, I think for the best results an interface with an SM57 is a tried and true method, even if you're recording a small amp like the THR, you can isolate the amp with blankets or sound proofing material. Try putting the amp in your closet, and once you get the sweet spot, you're set to record some awesome stuff! That's just what I would do, but theres a ton of great ways to record these days. Best of luck and thanks for watching 🤘
I know in GarageBand, a lot of people make the mistake of choosing the "guitar" input, which routes your guitar through the built-in amp modelers. Choosing the mic input allows you to get sounds from your THR.
Whenever I record my bass using this amp, the sound ends up completely different than the one I hear. Is it because i'm recording with a Mono instrument cable instead of a stereo one? I plugged the THR with a midi cable and into my laptop for audacity.
I would dial in the sound according to what you are hearing through your DAW, not what comes out of the speakers on the amp. Best of luck to you!
@@DrewCreal Thanks for the feedback!
Your tip contributed on my personal research and I found out that I didn't install the yamaha thrii driver on my desktop.
Everything works now :)
Hows the round trip latency on this thing when playing back through a DAW? Im a bedroom guitarist and im looking for either a multi fx board to be able to switch on effects on the fly when im playing or something like this, but the effects seem limited with this amp. Its quite impressive nonetheless, but just weighing all my options.
Can I use the amp to play backing track and jam along
Yes, that's exactly what this amp was made for, you'd love it!
Does anyone know how to use user memory button without remote app on thr10ii wls? I tried switching clean, lead, high-gain etc. knub consecutively, but i cannot hear anything!
Have you tried using the 5 preset buttons on the top of the amp to save your tones? That's probably the best way to change sounds on the fly. There are also several Bluetooth controller devices that you can use as well, like the XSonic Airstep YT.
Tried the THR10II and it was ok the high gain sound was great but it wasn’t loud enough for me. I wish the THR30II was priced a bit more reasonable will probably just get Spark 2.
Nice review. I have a the original cream THR and I would love to use my iPad for recording. Will this act as a interface with iPad? GarageBand or cubasis is a option as well. 2nd question, are the amps the same sounding as all the originals? Might be an upgrade option if it works on iOS. Thank you
1. You can record on your iPad with these, you just need the proper cable. The software is even included in the box when you buy one.
2. The amps sound similar, but the speakers have been upgraded. There are also way more tones with the new amp.
Thanks for the Video. Nice playing also. I have a few questions if you don't mind. The difference between the 10 and 30, just more volume or is there other things to it. Also, these compared to the Spark.
Thanks so much again.
With the THR30ii you get stereo 1/4" outs on the back. So, you can use this amp in a live situation which is really cool. There are also a few companies that make a bluetooth channel changer which is sweet. I have not had a chance to play the spark yet, but in general, I'm not a fan of Bias products.
@@DrewCreal Thank you for such a quick response. Means a lot.
More volume, slightly larger speakers, more amp models and stereo 1/4 outs.
The 30 also has a rechargeable battery and a built in wireless receiver and I believe you have to use the line 6 wireless transmitter. The 10 has the same amps and tone setting as the 30 but the ones on the 30 can be switched on the amp and the on the 10 you have to use the app to switch between the various amp models. The original thr10 had 3 models and the Thr 2 has all three. I used to have the spark but I returned it. To me the Yamaha sounds like a real amp and the spark sounded like a plug in.
Hi, great video! I was wondering if anyone knows how this amp responds to guitar pedals? - looking to get one, but might be a deal breaker if it doesn't work well with my pedals. Thanks!
That may actually be my next video on this amp, thanks for your question. There's a few different ways that you can use pedals with this amp and I'm looking forward to seeing how it sounds.
Hi
I use pedals...and it great
@@DrewCreal Thanks for your response! I look forward to that video!
Hi Drew, I've just bought this amp, it's brilliant.
One thing I would like to ask is when I connect my mobile phone via Bluetooth and play some music,I noticed that you cannot adjust the sound on the amp by using the bass treble or midrange knobs.
Is this correct,or am I doing something wrong?
Regards Ronnie.
I thought modelers were all 1000s of dollars, but this is a spectacular looking and sounding amp for less than 400. The wireless one is 450, which is 150 more than the wired version, but i guess youre also getting what is essentially a large portable bluetooth speaker, which is pretty sweet.
I would definitely get the wireless version that way you could do a super Spooky jam in the woods=D
I think this is cool for anyone who doesnt own a PodHd or Helix. I have both and cant find a reason to get it. Idk maybe ill find me a personal reason later on
Hi, a question I have is playing music from your paired phone. I connected to Bluetooth and then to the app, but music still comes from my iPhone. Thank you for your time!
Double check and make sure you are connected. Make sure no other devices are connected to the amp. If that doesn't work, "forget device (THR)" and try establishing a new connection.
@@DrewCreal Thanks! For me the fix was realizing that there are two bluetooth names for the THR. One is for the app and one is for the actual amp too. That cleared a lot of confusion for me!
@@Truthbearsartlessness I've been trying to figure this out for so long. Thank you
I just ordered that exact amp yesterday for my birthday. can't wait to play with it when it comes in the mail this saturday.
Me too, happy birthday
Just got one for my birthday today. Cheers
I love it! I was expecting to have to use the headphones jack to not torture my roomates as I go through the beginner phase of learning to play guitar but I can get the tone I like without having to get the amp too loud. I rarely use my headphones. This thing is ugly but aside from looks it's the perfect practice amp for me.
Great choice, I bet you're still jamming on it!
Dude I cannot figure out for the life of me how to use this thing with Cubase. I can never get it set up right.
Came here cause I saw Taylor Swift jamming to it!
So this DAW you are using on your computer, its using those settings and playing them out loud through your amp?
Yes! The I/O can be set to the THR
I have this amp haha, I had no idea this was possible.
Damn!! From french viet guy living in West Africa, Niel s fan!
Thanks for watching 👍
Why doesnt anyone show how to connect wireless to computer?
When using it as an Bluetooth speaker can you use the inbuilt eq ( low/treble/mid ) to edit the sound ? I have a vinyle player and If this Yamaha thing can equalise the audio I am sold
With the THR you don't get a full EQ for the Bluetooth functionality. I believe there is a flat EQ or bass boosted option. I'm not sure this would be the best option for a Vinyl player. I would look into getting a phono preamp, power amp and speakers for a nice vinyl turntable.
I have major issues with the Bluetooth control connection. It disconnects from my iphone or iPad, shortly after connecting. Can’t keep a connection. USB works consistent though. Other than that, I m very happy.
That sounds frustrating, maybe try updating the firmware on the amp, and download the newest version of the app, also update your iPad and you should be good.
Unfortunately the current app release on iOS is broken, at least on my iPad. Works fine on my android phone instead. I guess they’ll fix the app shortly, everybody is writing it doesn’t work on the App Store reviews.
Hi. nice demo. I heard the Line 6 transmitter had problems? I can use a normal cable or other wireless system too yeah? tks
You can definitely use a normal cable with the wireless thr models. I actually had a problem with my first Line 6 G10T transmitter and had to send it back. The second one has been working fine so far.
@@DrewCreal thanks
Thanks for the video! Very informative. I've got only a question: what are you playing at 5:46? sounds beautiful
Thanks!
Looks like I'm playing Gsus4 moving some notes around on the B string, then moving the same notes around within the C2 chord. Hope that helps 👍thanks for watching
Hi Drew. I bought a THR30II WIRELESS almost 4 years ago but only used it for about an hour then put it away. I was more into my THR100HD stereo setup at the time but would like to get that THR30II back out and take advantage of its wireless convenience. I was going to buy a ElectroPhonic guitar with built-in amp/speakers but remembered that i had this in my closet!
One really dumb question: I can't plug the wireless dongle into a pedal then use a cable from the pedal into the amp, correct?
The THR100 sounds really cool. If I remember correctly that amp has stereo capabilities right? If you get the Line 6 G10 wireless unit you can only use the amp directly from your guitar. If you want to play wirelessly with pedals I would recommend the XVive U2 system because you get a transmitter and receiver. I have a video to this below for you if you want to check it out.
th-cam.com/video/iFTI2mOV6xA/w-d-xo.htmlsi=Zy_bK6IWqp7WjiO0
This don't have the british drive the old ones had, right? It was the best channel on the old ones. But the special on this one is really good.
You're right, there's no british drive, but I'm sure you could get similar tones if you used the british speaker cabinet.
Nicely done. Might be time to get rid of the pedal board and amp, downsize, and give the wife and neighbors a break. BTW, awesome Carvin. I had them build me one and I couldn't be more pleased.
The Yamaha thr10 has become my main home amp. Sold my Classic 50 tube amp and packed my pedal board away, and I don’t miss either. More than happy with this little box for home use.
@@rocktorrocks Yep, I did exactly the same thing, same result. 👍
Kiesel/Carvins are great! I'm hoping to order a new one soon. Check out my video where I'm messing around with their virtual builder, fun stuff! th-cam.com/video/a1D5N-tKs2E/w-d-xo.html
Can you play music from your phone while using the guitar at the same time? And listening both?
Yes! You can definitely do that!
Yes. Master volume for guitar and volume for music
Can U plug into a mixer. Shame it didn't have a foot switch
You can plug the Yamaha THR30W into a mixer and then you can get an XSonic AirStep to control the presets if you're interested in controlling the amp with your feet!
Can you use both Bluetooth and guitar at the same time?
Yes you can! So that you can jam with backing tracks and songs streaming from your phone or tablet!
@@DrewCreal Just wondering, how would it sound if you were running a backing track and playing with overdrive on? My blackstar has trouble playing overdrive over a clean tone, things get a bit muddy lol.
After watching this, I going to get one, ideal for home use, Bluetooth very useful.
I think you'll enjoy owning this amp!
@@DrewCreal , hi, bought it and really enjoying it. It’s a great all rounder. The app is working flawlessly. Many thanks for making the time to do the video.
How do you download a patch from online into the app preset positions? Do I need some other software?
That's actually something I haven't gotten into yet, but I need to. Be on the lookout for a video on this soon.
Very good video. Thanks for putting it together. I appreciate it.
Thanks Kevin
since this records guitars will it work with a mic & vocals into the computer? and can i change those vocals with the possible effects?
You can use the amp the way that you described here. It could be a temporary solution to record guitar and vocals, but I probably would get an interface at some point for the best possible results.
I am hoping to run the non battery version with a external battery is that possible?
Thanks for your comment, you'll want to make sure your external battery pack has enough volts for the THR.
Just got this amp today, and I was able to connect via bluetooth for about twenty minutes. Then, no more.
Try updating the firmware on the amp if you haven't already.
How do you turn the light on? thx And what Carvin guitar model in this video
The light comes on anytime the amp is on. In this video I'm using a Carvin HF2 Fatboy. I actually have a video coming out about this guitar tomorrow.
how to pluge into computer and useing what cable? Because my computer wont recognize the amp
Try a different cable, or a different computer if you can.
Can you use Bluetooth headphones with it? That'd be cool
That would be cool but I don't think that would work.
could you also connect this to an acoustic guitar?
There is an acoustic setting on these amps, it sounds great with a little bit of chorus and reverb if you play an acoustic/electric guitar. There is also a new version of the THR that has a built in XLR input for simultaneous guitar/vocal use. It's called the Yamaha THR30iiA. Pretty cool amp if dream of playing coffee house, small club and street corner gigs.
@@DrewCreal thanks!! :)
I use this amp now about 6 months, after I had several THR 10's. Very happy with it, but there's one problem, the THR remote app....Connecting the amp for playing backing tracks on your Android tablet or phone is no problem, that works flawless, but connecting / syncing the THR Remote app with your Android device doesn't work so far. On laptop/ PC no problem at all, but as I am mostly working "on the road" it would be nice to make changes in a mobile way without unpacking my laptop everytime....anyone can help ?? UPDATE: Problem solved...If they had written that the amp should have been totally stand alone... still had the USB cable connected to the PC ( but not the Remote app launched, not even the PC on). But I still wonder WHERE the presets are saved on your mobile device. Within the app ??
Is the power supply 100 - 240v ?
Yes
Yep, AC 100-240V
Do you think my electric fiddle would sound good on it?
I think your electric fiddle would sound fantastic. I've already convinced one violinist to buy a THR. My recommendation would be to get one of the wireless models so that you can move around more freely when you play.
@@DrewCreal i did buy a used X version. Sounds great.
Can I plug a fantom x keyboard into it?
Hi. I connected my Thr10II to my Pc and messed around with the effects. Now the Thr10II has weird sound in the background (noises like when you turn up gain). Is there any way to resets the effects to the effects setting from factory ? Please help me out.
Try loading a factory preset from the app and see if that works.
@@DrewCreal I will try it !
Thank you for the answer :)
I love this amp i just found out about a "boosted stereo" mode if you hold down the the tuner it puts a little octothorpe (#) next to the tuner window and sounds incredible with the effects, i played the amp for 5 months before i found it. also you can drastically alter the way the amp simulation responds with the master volume, and guitar knob; for example you can dime one of the knobs and use the other as the master or vice versa and it massively changes the note attack and bloom its like comparing Vanhalen 1 to Ponrograffiti using the modern and classic modes its fucking wild.
Wow thanks. Didn't knew this.
Amazing stuff Gary, thank you for sharing! I love these amps, the best practice tool!
@@DrewCreal I just noticed how good your direct recording sounds through my monitors, the stereo chorus sounds great on my end. I havent even tried direct recording yet omg fantastic!
@@garyt3hsna1l82 I'm a sucker for some good stereo chorus. This amp does that very well. Thank you gary the snail.
Luv it. The spark 40 had more but started dropping out aft 2 yrs. Yam has more than i thought. Hope it will last longer.
Excellent review
Thanks for the kind words!
You're welcome
I think Holdsworth would like it.
I think he would too!
6:20 Dry signal. This is what separate it from Spark Amp I guess. Spark Amp's dry is unusable.
This would be rather clumsy amp if you wanted to do small gigs with it. You'd need a footswitch at least to change between lead and rhytm sound for example or any preset sounds for particular songs which possibility this does not seem to have ?
It's a practice amp mainly for home use and it's magnificent. I have the THR 10X and it's just great.
Read the manuals on the yamaha web page. You can connect a footswitch via Bluetooth !
I don't think this is possible with the THR, but is there a way you can record both the guitar AND the output coming from PC sound card? No matter what way I wire or set Input/Output devices it only records the actualy guitar signal, and not the signal coming from the PC INTO the THR's AUX input...
That Carvin is badass!!!! Beautiful axe!!
Thanks Travis, I love this guitar!
Can you play music on this from your phone via Bluetooth and play through it at the same time?
Yes
This is THE most common question about this amp, this is what the amp was made for, jamming along to songs and practicing, all in one cool looking box! Thanks for checking out the video!
Great demo ! Thank you Drew
Thanks for watching 🤘
Mine is due to arrive tomorrow. Many thanks for confirming I made the right choice. 👍🏻
It's a great amp, I bet you're loving it!
Is this suitable for acoustic?
There is an acoustic setting on the amp and it sounds pretty good, I've used it a few times. There is however a THR30A model that is made specifically for acoustic guitar. It also has a built in XLR input for a microphone so you can play both your guitar and sing simultaneously. Hope that helps!
You made me buy this amp, thank you. Great review, well done.
It's a great amp man! Can't go wrong;
Me too...
Hi I just bought the THR3011w. Is it possible to get a jazz tone like Joe Pass...? what do you suggest?
It’s a great amp , sounds are gorgeous, have you compared it to the the Positive Grid Spark 40? That’s getting a lot of attention these days
I definitely need to compare the 2 amps to each other, I'll try and get my hands on a Spark soon!
I can not make connection with the amp and smartphone. Do not know why? Green light is solid but no interaction with the knob images and the amp. Symbol is flashing in my phone.
Just got mine and I have the same problem, gonna update the amp maybe that helps. It that doesn't work I'll most likely end up just connecting it directly to my laptop
Make sure you've got the latest firmware and that your smartphone is up to date as well, you should not have issues connecting via Bluetooth.
4 day later update: i updated my hardware and now it works perfectly
I also managed to make some activity between. Sometimes the connection has difficulties to build up and takes more than one hour or can not be built at all (can not wait longer).
Excellent video, ty 👍🏼.
Glad you enjoyed it
Hi drew, Im wondering if u could use it for record player(turntable) too?
❤
Great job, really useful many thanks
Thanks for watching, glad it helped!
Do I need to buy USB A to B cable in order to record it on my computer?
Is it a head or a combo amp? Im confussed
It's primarily a desktop combo amplifier. Think of a mixture between having a bluetooth soundbar and a guitar amp with FX. If you get the 30 watt version you could probably use it as an amp head and run it straight into the sound board.
@@DrewCreal thanx for the awnser, had no clue these type of amps existed you learn something new every day. Can you run in trough a cab? Does it take pedals? Does it have an fx loop? It does sound interesting
*speedwagon*
LOL
Hi really cool demo. Any idea if I can connect and use my bluetooth headphones on this at the same time as my phone is connected via bluetooth for music playback? Not sure how I will be able to pair this with my headphones as I would on my phone or PC because there is no display to confirm the pairing? Thanks in advance - Mark
You may have to use chorded headphones with the setup you mentioned. I think the THR can only connect one bluetooth device at a time. I have some wireless headphones. I'll have to try that sometime soon. If you figure it out, please hit me up and let me know! Thanks for watching!
You have to use wired headphones. BT headphones usually have too much latency anyway,
nice review of this amp 👍
Thanks!
nice video, thank you. At arroud the 2 min mark you are using a fairly nice clean sound, in the video it seems that you have set gain to max. could you please share the settings for clean with us, this is whre I struggle a bit - thank you in advance
I've got another video where I cover my clean sound as well as a few other sounds, you can check it out here: th-cam.com/video/ou9Ekka_GT4/w-d-xo.html
For this amp, where the gain, or any knob is makes no difference for the presets. If you touch the knob after selecting the preset then you turn it on and can change the sound
can it connect direct to PA
You would not be able to bluetooth connect to a PA, but the THR30W version has stereo 1/2'' outputs on the back. Pan that hard Left and Right on your PA and I think you'd have a great sound.
@@DrewCreal thanks for your quick responce I was thinking connecting from the headphone out if that's possible
thanks man
No problem!
Really good, congrats 👍👍👍
Thank you so much!
can the yamaha be used as an interface for amp sims?
There is like a bypass that won't color it at all, the guy I bought mine from said he used it for piano but I imagine you could use it your way too
You can bypass the speaker cabinets and use amp sims from your DAW. That might be my next video idea!
This guy knows whats up!
@@DrewCreal id def like to see how it looks on video
mine doesnt work as a bluetooth speaker although its connected to my phone :(
"Thanks! For me the fix was realizing that there are two bluetooth names for the THR. One is for the app and one is for the actual amp too. That cleared a lot of confusion for me!" -From a comment above
@@electropentatonic thanks for the answer! It took my also a while to understand there are two yamahas. My issue is thay whenever I connect them, one of them looses the connection. For instance I cant use the remote app when Im connected to it as a speaker and the other way around
@@A-Wa update it! (the amp software i mean)
I can't get cubase to work with thrii. Input MIDI's seem right. Very frustrated. I am new to recording environment and a Windows guy. How did you map your MIDI inputs? I'm stuck.
Hey Robert, I can't say that I had any issues connecting my THR via USB and using it as an interface. Your computer should recognize the THR when you plug it in. I'm sorry, I wish I could be of more help to you. Maybe I will make a video using the THR as an interface soon.
Does the THR REMOTE works only through USB? Can i use it via bluetooth?
THR Remote is the name of the app for ios and android, THR Control works via USB from you laptop or desktop.
Thanks for such a great review!!😃
I couldn't get the Cubase AI to get the DAW, since it requires an access code at the end. Any tips on how to get that thing installed?
You should have an access code in the box that your amp was shipped in.
Can I plug both a microphone and an acoustic- electric guitar simultaneously into this THR1011 Guitar Amp?
No
Nope, but the new THR30A allows you to do that.
Nice! Do you still use it?
Every day!
@@DrewCreal Great! Do you use wireless and/or rechargeable battery function?
I have a THR 30W and I've used it as a Bluetooth speaker several times while camping. The wireless feature is really useful for when you're practicing. You can move the amp around the room. I really enjoy having this option but it's not crucial, don't let it stop you from getting a THR10ii, they're a little cheaper.
You might like this video as well. th-cam.com/video/xW5Ahnwlcm8/w-d-xo.html
@@DrewCreal thanks! I am interested in both these options, since I have some weird noise issue at home when playing guitar and I recently discovered that if I play via wireless system or with battery amp, this noise is completely gone! I checked for all possible ground loops etc, but no solution was found so far rather than wireless or batteries. So I now started to look for the best possible solution that have these options. This Yamaha looks good, sounds good, have cool functions. Probably will make myself a present.
Do you know why the volume is so weak in logic? Like when I record and play back, I can hardly listen to it
I'm not sure why that would be. Open up the settings in the THR Control app and adjust the guitar/audio crossover.
@@DrewCreal thank you!
PC compatible?
Yes!
Yo Matt Damon doing gear reviews now?
LMAO!!!!
Tons of 1 star reviews in the App Store…..has this gotten worse with updates since your review?
Does the THR play guitar through both speakers? Because I tried already 2 THRs 30 II and I got impression, that guitar plays only through LEFT speaker of THR amp - can anyone confirm?
No.
What about plugging in your modeller by setting the amp as 'flat mode' ?
I have not tried this yet, seems like a great idea though.
My teacher made me buy this one ! can't wait to receive it, by the way, i often see that thing that is placed after the nut of your guitar, what is this ?
Your teacher made a great amp recommendation for you! I'm using a gruv gear fret wrap. Sometimes I use this when I'm recording solo work in the studio. Adds a little continuity to my different instruments as well. Cheers my friend!
@@DrewCreal ah good to hear so ! thank you for the info, figured out i don't really need a fret wrap right now as a beginner haha
THR30 II has 2 flaws :
1) Choose some factory preset, go to the tuner, leave the tuner - you're no more on this factory preset.
2) Guitar and Audio volume knobs do nothing for LINE outputs - this is some major drawback.
just use a clip on tuner, i never use tuners on amps ever in my life
@@darinsteele7091 it's not about that. It's about that you pay lot of money for device with flaws. Next thing. Take echo knob. On my THR30 when you turn it clockwise to almost halfway of echo range, nothing happens. If you have an app, observe how echo mix starts from 19% or similar value, when you use the knob. With the knob you also can't set the mix of echo to 100%
@@graycolors2879 with my THR10-II, the FX will kick in a little less than a quarter, i had to listen very carefully to pick it up. I don't know why they did that, just the way it's designed I guess, kind of annoying I didn't really pay attention before.
@@darinsteele7091 on THR10 1st gen, FX kick in since the start. The same with echo. Starts after about halfway, ends when echo+rev should be there.
After exiting the tuner, where does it take you to, if not the preset that you were previously on? Is this issue common to the THR10II?
Hey, how does it take pedals? I wanna buy the amp with an expensive pedal
I haven't tried running any pedals into this amp, but I'll let you know when I do.
@@DrewCreal And :(?
@@ronnysuarez3257 Anderson's used pedals thru it and it seemed to work well
@@bxb1996 the thing is I wanted to use it with a 400$ pedal.. Some people told me it wouldnt work as well as with a 100$ pedal
@@ronnysuarez3257 because of what, what is the relevance of the price I don't understand what you are talking about?
Great review! I was wandering how this amp does with external pedals since it doesn’t have an effects loop. Or does it? Thanks
I've actually got a whole video that covers this and it sounds pretty good!
The video audio is terrible, please invest in some decent equipment
Thanks for watching, my newer videos have better audio.
I gave up at 1 minute. Why does there have to be a background sound ? I just wanted to hear about the amp. Seems a lot of people feel the need to add a sound track. Doesn't work for me.
Sorry Alan, I'm sure you'll find a video that works for you!