I was wondering if the single gaskets really make a difference compared to the full size ones, mine arrived earlier today and I've got it set up with the sticker (well tape lol) and the bottom case foam
Hi, which switch would you recommend for this board? Lubed akko cs crystal or lubed akko cream yellows? Which would sound closer to the marbly jelly epoch sound?
hi! i’m not really familiar with the jelly epoch sound. but you can refer to the keebrolls of each switch using ACR pro 75 on this video, around 11:38 mark : th-cam.com/video/8IrbMn2D3i8/w-d-xo.html regarding the recommendations between crystals or cream yellows, if you’d like your switch heavier and cheaper, go with the cream yellows, but if you rather higher sensitivity on the response and rgb friendly switches, then go for the crystals. at the end of the day, your switches should suit your personal preferences 😄
heyy. From various videos I've watched, it seems like its always safer to use an electric tape or something like that with all these small electric stuffs, for case of any unfortunate short circuit, or fire, or so ~ I've seen lots of other builds as well who use painter's tape. This sticker feels the same as that, only prettier. Its highly unlikely though, but, if really worried, don't risk it. :)
Hi! Planning on buying this board but wanted to know first if it supports N-key roll over as I also plan tp use it for gaming. Nice content! Keep it up!
ACR pro 75 got better upgrades from the 5075s. i personally find the 5075s screw-less design somehow difficult to open if you want to mod the board, or if you want to change the metal plate with polycarbonate.
I decided to go with ACR Pro 75 bro also was torn between both board especially that knob that the 5075s have almost got me but after washing videos I settled for the ACR 75 better modability and since the 5075s is a screw less gasket mount board the screw less technology will for sure degrade after a few times of opening the board so screws for the win
not the exact figure tho. its heavy enough to hold its own in place, but not too heavy to carry around if you need to! i occasionally bring mine to work
i wouldn’t say they’re in the same category. there’s a lot of reason to pick one over the other. check your personal preference and personal requirements before choosing one. personally, id choose acr pro 75
@@eraechoin3278 No, I mean the case color dimmed most of the light, with the transparent white the rgb led can shine through mostly but with the smoke black like this case it just can't.
hi! welcome, if someone has been following my channel for a while, they’ll know that i’m really a light typist. however, for the a different typing style and full board potential, may i recommend you a video from consumer tech review? he definitely have the content you’re looking for. cheers! th-cam.com/video/GLDOif6CfrU/w-d-xo.html
Akko ACR Pro 75 : en.akkogear.com/product/acr-pro-75-mechanical-keyboard/?ref=mczstudio
is the back rgb noticable when using it normally? Also would case foam or masking tape block the backlight rgb?
It's sale today and just for 60 bucks. Thanks for video. It looks amazing. I ordered mine today.
oh my. $60? 😱
@@mczstudio Yeah cause Akko's 7th Year Anniversary. %50 off for some keyboards.
Just recently bought the prebuilt version of Acr pro 75 and all I can say is it is really good out of the box. And the price is really cheap.
akko’s pre-built boards are unarguably worth more for its price 💯
I was wondering if the single gaskets really make a difference compared to the full size ones, mine arrived earlier today and I've got it set up with the sticker (well tape lol) and the bottom case foam
The single gasket makes the keyboard really bouncy and viby.
How's the weight on it?
would it be ok if i put 1 layer of tape then the sticker? and also mine came with foam so where should i put it? ( im new to building keyboards)
depends on what the foam is, its either in between the place and PCB, between the case and the PCB.
@@mczstudio thanks, but what about the tape? if i could put a single layer of it then the sticker which should i put first?
I'm sold.
Are the single gaskets included? If not, how are they called and where do they sell them?
they're included!
Akko ACR Pro 75 or EPOMAKER TH80 Pro Kit?
can't tell yet! I haven't open the TH80 i received!
Is the switch puller any good?
it is actually. I recently prefer using it over my previous one.
Does akko have software where you can change the key bindings?
akko have cloud driver, you can download it from their website 😁
Sounds good!
helloo. thank you 🙇♀️
Wonderful review, just ordered the same keyboard.
it's gonna be like a treasure box inside! please come back here and let me know if the pcb tape/sticker is an official inclusion in the whole set!
@@mczstudio Hello I just ordered the same board can you please teach me how to lube the the switches do you have a discord or something?
Do you by any chance also own the akko mod 007 pc? I am thinking of buying either one.
yep! i have it here :
th-cam.com/video/OXXxOZLgo0E/w-d-xo.html
Hi, which switch would you recommend for this board? Lubed akko cs crystal or lubed akko cream yellows? Which would sound closer to the marbly jelly epoch sound?
hi! i’m not really familiar with the jelly epoch sound.
but you can refer to the keebrolls of each switch using ACR pro 75 on this video, around 11:38 mark :
th-cam.com/video/8IrbMn2D3i8/w-d-xo.html
regarding the recommendations between crystals or cream yellows, if you’d like your switch heavier and cheaper, go with the cream yellows, but if you rather higher sensitivity on the response and rgb friendly switches, then go for the crystals.
at the end of the day, your switches should suit your personal preferences 😄
@@mczstudio your Kbd67 lite sounds so good, can I know exactly what mods you have done to it? :)
@@auzhiyi2507 all stock aside from tape mod and durock stabs!
@@mczstudio And which is more expensive between the Crystal and Cream Yellow switches?
just a question is it safe to put the included sticker on the PCB? recently bought this model. I'm thinking of copying your build. Thank you.
heyy. From various videos I've watched, it seems like its always safer to use an electric tape or something like that with all these small electric stuffs, for case of any unfortunate short circuit, or fire, or so ~
I've seen lots of other builds as well who use painter's tape. This sticker feels the same as that, only prettier.
Its highly unlikely though, but, if really worried, don't risk it. :)
@@mczstudio Thank you for the response! Will take note of this. Great vid
Hi! Planning on buying this board but wanted to know first if it supports N-key roll over as I also plan tp use it for gaming. Nice content! Keep it up!
Hello. Please can you help me decide on this or the 5075S? They both look so good
ACR pro 75 got better upgrades from the 5075s. i personally find the 5075s screw-less design somehow difficult to open if you want to mod the board, or if you want to change the metal plate with polycarbonate.
I decided to go with ACR Pro 75 bro also was torn between both board especially that knob that the 5075s have almost got me but after washing videos I settled for the ACR 75 better modability and since the 5075s is a screw less gasket mount board the screw less technology will for sure degrade after a few times of opening the board so screws for the win
@@jaben9654 Thanks man I made the same decision for pretty much the same reasons
@@dirkcoetsee5782 Mine coming in a week or two
In the end the stabs on this were no good for me :(
Thanks for the video! Do you know how much the board weighs?
not the exact figure tho. its heavy enough to hold its own in place, but not too heavy to carry around if you need to! i occasionally bring mine to work
right now I'm torn between getting the ACR Pro 75 and the ACR Top 75 :c
can't go wrong with either!
This or Monsgeek M1?
i wouldn’t say they’re in the same category. there’s a lot of reason to pick one over the other. check your personal preference and personal requirements before choosing one.
personally, id choose acr pro 75
The south facing is good, but the black smoke case blocked all the RGB light from the edges
Actually you can turn it on using the Akko Cloud driver. In the video it doesn't seem to be turned on.
@@eraechoin3278 No, I mean the case color dimmed most of the light, with the transparent white the rgb led can shine through mostly but with the smoke black like this case it just can't.
hi! the light bar effect was indeed turned off in this vide. although it is mostly reflecting through the bottom case only.
@@mczstudio how do you enable it
Awesome review, just ordered this! do the switches come pre lubed?
heyy. no. it doesn’t seem like it.
Factory lubed
Mine should arrive in two days. Can you make a modding guide
heyy ~ aside from a slight tuning of the spacebar stabs, I don't think I will add more mods to it! I'm quite satisfied with the stock. :D
awesome!!! maybe time for me to get another one hahaha
😂 can never have too much keyboard 😅😅
@@mczstudio best answer ever
Why are you typing so lightly? We can't hear the full sound potential of the board.
hi! welcome, if someone has been following my channel for a while, they’ll know that i’m really a light typist. however, for the a different typing style and full board potential, may i recommend you a video from consumer tech review? he definitely have the content you’re looking for. cheers!
th-cam.com/video/GLDOif6CfrU/w-d-xo.html
nossa que video incrivel parabéns
thank you!
To risky cutting above the PCB . you have nervs of steel
just confident with my paper cutting skill! 😂
Hi mate
hi!