I would have replaced all the bearings, piston rings and shaft seals. This is a basic thing, it costs pennies, they should have been replaced during such a major renovation. This is just a car wash, nothing more.
Not showroom restoration, but certainly better and functional. :) Great job!!! How in the world do you remember where everything goes? Also, one of the blades is loose, needs to be tightened a bit more. :)
what makes mower decks rot and gets punky is moisture and grass just sitting and the quality of the decking material. Most decks have a deck wash. It uses a garden hose fitting to the deck you set the deck setting all the way lowest setting get the water flowing start the mower run the deck about full throttle the blades fling water around the deck. it get some but not totally clean. you just need to periodically hose down the underside. thin material won’t last as long you’ll have to patch as it rots out eventually replacing the whole deck.
27:44 под эту и все пластины, которые вы поставили, нужно было нанести антикоррозийный состав, устойчивый к высоким температурам, чтобы предотвратить ржавление. Иначе все ваши труды в скором времени пропадут даром.
Jesus Cristo Salvador amém. Deus é fiel Deus é bom Deus abençoe nos abençoe sempre Deus me livre Deus ilumine seu caminho da verdade cura salva Salvador Luz amém. Amém Jesus de Nazaré nazareno rabino mestres do Senhor divino Espírito Santo 😂😂❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤. 2024.é o amor programa crianças esperanças ele ou ela eles ou elas 2024.
@@restorationsskills4967 BC I say so. I am an accountant by the trade and would do better than you. 1. You don't steal unless this is stupid story of Andy who puts leaves under the cover 😆 2. Use paint stripper or sandblaster not a grinder to strip the paint. This ruins surface at the beginning of your paintwork journey 😊 3. This wealding is a joke. Rod wealding is good to connect two pipes not a sheet of zinc plated sheet. 4. Can of rust converter costs pennies and worth applying as a primer. 5. The motor. This ohv motor is simple as 1m of cord in your pocket 😊 nothing there so check piston,rod, rings, bearings and maybe a bit of honing. Polish valves, reassembly and Change the oil.
The lawn tractor overall looks alright, that’s more a repair video than it is a restoration. The metal fabrication on the cutting deck is probably the most cobbed up jobs I’ve ever seen, it just looks like crap to be honest, it doesn’t look restored at all. Even using old parts like the bearings that could wear out easier. It does look much better than you all found it though, but I wouldn’t call this a restoration. To restore something is to put it back in the same shape when it was purchased new, this mower is not, but looks like a pretty descent repair job.
Muito bom seus vídeos vocês são muito inteligente profissionais são Paulo
Thank you very much. Please follow and support us!
Very good🎉🎉🎉
Thank you
The recovery of the extraordinary Kubota grass cutting machine and your work is going very smoothly.
Thank you very much. Please follow and support us!
Brand new.super job 👍👍👍
Oh boy, don't replace any worn/crapped out parts, all profit. I feel sorry for the person that buys this lawn mower.
Thank you
Facts all of these channels are mad click bate it may look nice but it doesn’t mean they did it right
hi there guys that was a great restoration looks and sounds awesome job very nicely done i love the channel perfect job great video
Thank you very much. Please follow and support us!
你好厲害👍👍
Thank you very much.
I would have replaced all the bearings, piston rings and shaft seals. This is a basic thing, it costs pennies, they should have been replaced during such a major renovation. This is just a car wash, nothing more.
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Thank you very much.
Good restoring
Thank you very much. Please follow and support us!
Very nice
Thank you very much
you are doing well🎉🎉🎉
Thank you very much.
Sksajjj
good areas to test out the mower after it’s fixed up.
Thank you very much.
Very good :)
Thank you very much. Please follow and support us!
很好❤❤❤
Thank you very much.
Hello everyone have a nice day amazing video
Thank you very much. Please follow and support us!
well done, keep up the good work, I didnt see in the video did you sharpen the blades? it will make it easier to cut the long grass
Thank you very much. Please follow and support us!
Belo trabajo.
Thank you very much.
Not showroom restoration, but certainly better and functional. :) Great job!!! How in the world do you remember where everything goes? Also, one of the blades is loose, needs to be tightened a bit more. :)
Thank you very much. Our team of workers has many years of experience so they can remember every detail
what makes mower decks rot and gets punky is moisture and grass just sitting and the quality of the decking material. Most decks have a deck wash. It uses a garden hose fitting to the deck you set the deck setting all the way lowest setting get the water flowing start the mower run the deck about full throttle the blades fling water around the deck. it get some but not totally clean. you just need to periodically hose down the underside. thin material won’t last as long you’ll have to patch as it rots out eventually replacing the whole deck.
Thank you for your feedback so we can improve future products. Wishing you good health
27:44 под эту и все пластины, которые вы поставили, нужно было нанести антикоррозийный состав, устойчивый к высоким температурам, чтобы предотвратить ржавление. Иначе все ваши труды в скором времени пропадут даром.
Thank you for your feedback so we can improve future products. Wishing you good health
такое впечатление что они мотоциклы и др.технику,как грибы в лесу собирают
Thank you very much.
It will be amazing if they get all those pieces back together the first go around. Just saying. Good video.
Thank you very much. Please follow and support us!
31:12 сварные швы плохо заделаны на пластине в центре, ржавление пойдёт туда, внутрь.
Great job but front tyres were cracked and needed replacing. Clearly the mechanic doesn’t cut many lawns he we trying to cut it too low to start with.
Thank you very much.
@@restorationsskills4967 , ,,. ,
, can't
The hoods burnt but the engine isn't?
You didn’t put grease in the gearbox? It will not last long!!
thank you so much we greased it but didn't put it on the video
I think that it's somebody else property..😂😂😂
you're really funny
You should've replaced the bearings on that deck spindle, they're growling like a dog.
Лезвия то не заточили, по нормальному, косилка будет рвать траву а не резать.
Thank you for your feedback so we can improve future products.
Prijatnovamrestaurirovatstarujutexniku😉🫢🫢🤗🥰😎✌️🫵👍🚜.
Thank you very much. Please follow and support us!
А можно узнать какие модели сварочных аппаратов вы используете?
Just a normal stick welding machine
@@restorationsskills4967 не согласен, мастера такого уровня не используют обычные аппараты.
I can ask its this Kubota its diesel engine or petrol
It looks like he leaves it there
Oh no. it's been there for quite a while. We were called by the car owner to repair
Very hard
Thank you
👍
Jesus Cristo Salvador amém. Deus é fiel Deus é bom Deus abençoe nos abençoe sempre Deus me livre Deus ilumine seu caminho da verdade cura salva Salvador Luz amém. Amém Jesus de Nazaré nazareno rabino mestres do Senhor divino Espírito Santo 😂😂❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤. 2024.é o amor programa crianças esperanças ele ou ela eles ou elas 2024.
Thank you very much
Runs rough and mows terribly. Fail.
what ?
This is a joke...
why?
@@restorationsskills4967 BC I say so. I am an accountant by the trade and would do better than you.
1. You don't steal unless this is stupid story of Andy who puts leaves under the cover 😆
2. Use paint stripper or sandblaster not a grinder to strip the paint. This ruins surface at the beginning of your paintwork journey 😊
3. This wealding is a joke. Rod wealding is good to connect two pipes not a sheet of zinc plated sheet.
4. Can of rust converter costs pennies and worth applying as a primer.
5. The motor. This ohv motor is simple as 1m of cord in your pocket 😊 nothing there so check piston,rod, rings, bearings and maybe a bit of honing. Polish valves, reassembly and Change the oil.
🇲🇾🇲🇾🤝🇻🇳🇻🇳😍😍💯👍👍😍😎
What a crap result.
س sks,
The lawn tractor overall looks alright, that’s more a repair video than it is a restoration. The metal fabrication on the cutting deck is probably the most cobbed up jobs I’ve ever seen, it just looks like crap to be honest, it doesn’t look restored at all. Even using old parts like the bearings that could wear out easier. It does look much better than you all found it though, but I wouldn’t call this a restoration. To restore something is to put it back in the same shape when it was purchased new, this mower is not, but looks like a pretty descent repair job.
Thank you for your feedback so we can improve future products. Wishing you good health
Very good🎉🎉🎉
Thank you very much. Please follow and support us!
Very good❤
Thank you very much.
Very nice🎉🎉🎉