Tsx 6th gear swap into k20 dc5

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024
  • As some of you guys might know I bought this trans from JdmOhioDirect dc5 its about a year ago and I travel on Monika very far distance and I might say I hate how short 6th gear is running at 4500rpm just to keep up with traffic, the main reason why I did it mpg and get that better rpm keeping that motor running longer its the idea...

ความคิดเห็น • 39

  • @Lastsight100
    @Lastsight100 5 ปีที่แล้ว +7

    Now that is some quality service replacing the parts.

  • @jonathancaraballo6429
    @jonathancaraballo6429 5 ปีที่แล้ว +2

    Old fashion good tricks I liked it nice work vato loko

  • @Ek9luis
    @Ek9luis 5 ปีที่แล้ว +2

    Great work vasile learning alot

  • @alfredomojica8841
    @alfredomojica8841 5 ปีที่แล้ว +7

    Can you put the Part number you use to get the 6 gear

  • @TheBrideOFChrist-7
    @TheBrideOFChrist-7 2 ปีที่แล้ว

    Where you been at Vato Make me laugh when I’m having a bad day make my day was all your uploads in your videos keep up the good work bro upload some more videos

  • @cassielao8463
    @cassielao8463 4 ปีที่แล้ว +3

    does it has to be a 6th gear from an tsx ? i wanted to put a accord 5 into my ep3 for the 6th

  • @oldsklteg
    @oldsklteg 5 ปีที่แล้ว +2

    My daughter gets so hyped at the yo yo yo intro 😂😂

  • @Kiret123
    @Kiret123 ปีที่แล้ว

    Thanks for sharing. Can u confirm the countersunk allen bolt that goes into the end of the shaft is reverse thread? Difficult to see on video.

  • @theoneofone2992
    @theoneofone2992 5 ปีที่แล้ว +5

    I WISH YOH WOULDN’T HAVE SPED UP THE VIDEO DURING THE GEAR SWAP

    • @vasilegarage2606
      @vasilegarage2606  5 ปีที่แล้ว

      Sti Wrx that the easy part just pull it out and put the new one same way I take the old one u put the new one

  • @kopuandino7982
    @kopuandino7982 ปีที่แล้ว

    Great video !! But can u please add the parts numbers too ? I want to do this in my trans pretty soon !! Thank u

  • @samhan7048
    @samhan7048 5 ปีที่แล้ว +1

    Aye do you actually need to get a new synchro to go with the tsx gear or can u use the existing one? Reason being is I just put in a full synchro kit from synchrotech and wondering if I need a different one.

    • @vasilegarage2606
      @vasilegarage2606  5 ปีที่แล้ว +2

      Sam Han you need the new Synchro bec it’s diff on the tsx that’s why I got the complete gear set

    • @samhan7048
      @samhan7048 5 ปีที่แล้ว

      Vasile Garage ty

  • @chriscichlids5681
    @chriscichlids5681 5 ปีที่แล้ว +1

    Hey man love that watch btw how much for the used gear u took off

  • @kumarsingh5037
    @kumarsingh5037 4 ปีที่แล้ว

    I watched most of your videos and I like the way you work.. I have a 1996 ek and I want to do a k24 swap for the first time.. Which tranny and engine would you recommend for me to start with?? I wanna go turbo.
    Where I live not much people does these kinds of work. Where can I get the engine and tranny from?? Thank you keep up the good-work!!!

    • @averyalexander2303
      @averyalexander2303 ปีที่แล้ว

      The USDM 06-08 K24A2 is the best of the K24's. Which transmission you get is just a matter of personal preference. To me, the ideal setup is the 02-04 RSX-S 6 speed with the TSX 5th and 6th gear for MPG and OEM LSD for traction, but the 6 speeds are very expensive and hard to find, especially the 02-04 Type S and JDM Type R, so a 5 speed isn't a bad option either. The EP3 5 speed is preferred over the RSX 5 speed because it has shorter gear ratios, but don't hesitate to get an RSX 5 speed if the price is right. I'm currently running an 05 RSX 5 speed with my stock K24A2 because I got it cheap and it drives perfectly fine. It doesn't bog down when shifting to 3rd like others claim, with the torque of the K24 it pulls great. However, I found an 04 RSX-S 6 speed trans for $1000, so I'm going to get that since I can get most of that back selling my 5 speed. Beware of the differences between speed sensors though. With the exception of the 05 EP3 trans, any K series trans newer than 04 will have a "high frequency" speed sensor that outputs a totally different signal and requires workarounds to get it to work in an older chassis. The 8th gen Civic Si trans has a 4.7 final drive, factory LSD, and the same tall 6th gear as the TSX, but it has a high frequency VSS and the shift selector has to be modified for most swaps.

  • @yonodc5705
    @yonodc5705 5 ปีที่แล้ว +3

    If I’ve never done this before and was following your build I’d be very confused

    • @averyalexander2303
      @averyalexander2303 ปีที่แล้ว

      What's confusing about installing a taller 6th gear in a transmission to lower your cruising RPM for less noise and better fuel efficiency? It's about the most basic mod someone can do to their transmission.

  • @hondahybridz5125
    @hondahybridz5125 5 ปีที่แล้ว +1

    Hey wuz up vato locos? Good job keep up the great vlogs. 👍👍 what's the name of the 1st song u put while on timelapse?

  • @picklessour4615
    @picklessour4615 3 ปีที่แล้ว +1

    whats the part numbers to all the parts? need to do my type s trans lol cruising high rpms is no bueno!

    • @vasilegarage2606
      @vasilegarage2606  3 ปีที่แล้ว

      Whatever I supply in the bud that’s all I got

  • @turbokefhatch9144
    @turbokefhatch9144 ปีที่แล้ว

    80miles
    How manu rpms u hitting?

  • @Gamer_Marcy_God
    @Gamer_Marcy_God 3 ปีที่แล้ว +1

    Show us how to remove the gearset, cuts to the gearset already removed... thanks mate

  • @dokterkarel
    @dokterkarel ปีที่แล้ว

    "yo, you know what I mean? Put it back together yo, you know what I mean? Then pull the shaft off, you know what I mean?"
    Yes, I think I know what you mean.

  • @tony89626
    @tony89626 5 ปีที่แล้ว +1

    What oil you using in the trans?

  • @gearhead3500
    @gearhead3500 4 ปีที่แล้ว +1

    is this also possible with the ep3 5 speed also how low does the RPMS drop on the highway at 65mph an get you give me the parts numbers for the tsx 6 gear

  • @joseblanco3579
    @joseblanco3579 8 หลายเดือนก่อน +1

    Can you do one for me ?

  • @BassRocket
    @BassRocket 4 ปีที่แล้ว +1

    what lift is in your garage?