I do believe the cylinder will leak on both ends. The rubber gasket is NOT clamped between the ends of the cylinder and the end caps. Oil will leak around the rubber and the face of the cylinder and end clamps under pressure. Rubber oil ring needs to be down inside of cylinder ring groves on the end caps. The drawing is well done, but mechanically wrong unless I missed how the rubber oil was assembled into the drawing.
this video is busted it stops at around 1:19 where the first long bolt and nut in inserted then it stays on that until 1:27 where it shows the exploded view. This is the first Issue I have ran across on your wonderful video series on solid works. Thanks for your time and efforts.
Incredible tutorials!! I learned alot from your channel with Solidworks, thank you! 🙏🙏🙏 Maybe a liiiitle bit too many ads to concentrate on the video in any reasonable regards 🙄😂 But I hope the revenue is worth making those tutorials for us!😎
top cover clik top plane,lalu klik rectangle untuk membuat sketch lalu clik start dimension untuk memberi ukuran lalu beri ukuran =165.10 selanjutnya clik extrude boss dengan ukuran 50.80mm selanjutnya click sketch lalu pilih circle dan beri ukuran 80mm lalu click extrude boss/Base dan beri ukuran 52mm click ok selanjutnya click sketch dan pilih circle dan beri ukuran 64mm lalu click extrude cutt dengan panjang 28mm click ok selanjutnya buat sketch didalam lubang pilih circle dengan ukuran 60mm dan click extrude cutt dengan ukuran 22mm selanjutnya click fillet dengan ukuran 1.1175mm lalu pilih di setiap sudut untuk di fillet
Sir if u dint mind I want to ask something.........how do u get these design dimension and idea......and second thing is if I want to sell my design so where should I go so that I can get some earning also.......plz sir provide me the guidence in both the questions
![How to make a hydraulic cylinder [ DIY ] * Subtitles *](/img/n.gif)
The video stops from 1:18:35 to 1:26:35 Please re-upload video!
I do believe the cylinder will leak on both ends. The rubber gasket is NOT clamped between the ends of the cylinder and the end caps. Oil will leak around the rubber and the face of the cylinder and end clamps under pressure. Rubber oil ring needs to be down inside of cylinder ring groves on the end caps. The drawing is well done, but mechanically wrong unless I missed how the rubber oil was assembled into the drawing.
Sir you are perfect, we learn many things from you. Thanks
I agree, i have learned a lot.
Piston can be done with command Revolve, just sketch section A-A and do Revolve Boss Base
yeap ,that`s the easy way to create a piston
this video is busted it stops at around 1:19 where the first long bolt and nut in inserted then it stays on that until 1:27 where it shows the exploded view. This is the first Issue I have ran across on your wonderful video series on solid works. Thanks for your time and efforts.
You are my hero. Always great lessons.
❤️THANK YOU❤️
Incredible tutorials!! I learned alot from your channel with Solidworks, thank you! 🙏🙏🙏
Maybe a liiiitle bit too many ads to concentrate on the video in any reasonable regards 🙄😂
But I hope the revenue is worth making those tutorials for us!😎
The video stops from 1:18:35 to 1:26:35
Who is watching in 2024
Your father
Thanks for the video and being such a great teacher
Really learn a lot.. compare to classes
kindly make a video on drafting veiw layout,sections view broken out,Crop etc .. and .your tutorial is very helpful
Please re upload the video, the explosion part is missing, how to make it in video mode please
top cover
clik top plane,lalu klik rectangle untuk membuat sketch lalu clik start dimension untuk memberi ukuran lalu beri ukuran =165.10
selanjutnya clik extrude boss dengan ukuran 50.80mm
selanjutnya click sketch lalu pilih circle dan beri ukuran 80mm lalu click extrude boss/Base dan beri ukuran 52mm click ok
selanjutnya click sketch dan pilih circle dan beri ukuran 64mm lalu click extrude cutt dengan panjang 28mm click ok
selanjutnya buat sketch didalam lubang pilih circle dengan ukuran 60mm dan click extrude cutt dengan ukuran 22mm
selanjutnya click fillet dengan ukuran 1.1175mm lalu pilih di setiap sudut untuk di fillet
Sir, your work is very beautiful
Sir make a video series on motion study and simulation step by step like as u make on part design and assembly line in solid works....
is it single or double acting
Sir if u dint mind I want to ask something.........how do u get these design dimension and idea......and second thing is if I want to sell my design so where should I go so that I can get some earning also.......plz sir provide me the guidence in both the questions
Very good video. Is it a single acting or double acting cylinder? 🇨🇴
Firstly, it doesn't have a spring inside
Secondly, it has two connection ports. Therefore, it's definitely a double acting piston
how much the force N ?
Sir nice solid work
Is this compatible to Solidworks 2013?
can u design a lift double parking system for 2 cars
Thanx you very help full knowledge.
Thank you very much!
sir piston cylinder k bhr kyu arha h.
can i get the file of this cyclinder
Thank you
Very nice DESIGN
Sir you are not answering my question .... I asked you many times that what is the minimum specification of laptop to use solidworks software.
good job! what about the animation?
super thank you
What is the software name
Solidworks
Software solidwork not installing how can install
Can you please draw a bus or car using surface commands