More detailed video, can go to this link. • ICSee Ip Camera Full S... Ip Camera / Baby Monitor ICSee Setup. Get it on www.tokopedia.... Manual setup, without using qr code scanner. • ICSEE ip camera manual...
I bought it some years ago. Worked at first. Then came in the closet and now I wanted to use it again and can’t get it on wifi. When I read it can’t connect with the wifi from now 2021. Don’t like that. Is there no upadate?
@dita van stipriaan hi there. Have you tried to hard reset the camera? Can do it by press and hold the reset button around 10 seconds until the camera promt "reset back to factory default". After that, try to re-setup the camera again. Hope it will works 😊
@@5u8y86 yes I try’d but didn’t helped. So it is going to the bin 🙈 and I don’t like that. But it doesn’t do anything anymore. The strange thing is, it did worked. But I think the routers have been a lot faster nowadays (??). Bought it 2 or 3 years ago. So the program from this product is to old and need an update
I;m using ICSEE for 4 cameras, we are trying to share it with our parents in the other side of the world, we create an account for them and check the sharing cameras before, but when they enter to their account the device window is empty, i opened here and I can see the cameras. also they use our administration login and it is the same, they have an empty device list
@catherine lawrence hi there, have you tried to restart the cam? Can simply restart it by unplug the power cord then wait for 10 second then plug it again.
i ave this exact camera and app. But as good as the quality is, the camera itself just picks up so much noise that I cant even hear what someone is saying at the front door? Is there a way to minimize the backgroud noise or i guess to turn the Mic down?
hi there, thanks for commenting in my videos. i don't think there is no options for turning down the mic volume since it only have on / off option for the mic. ;)
If I start ICsee with with my Account login and my Remember PW I will not find any Add my camera, If I log out is the same. What shall I do? it will be nice to add to your presentation how to add second camera.
the reset button should be around the cam. Look carefoully all around the cam. There should be a tiny hole. Press the tiny hole using pinset / paper clip / needle then hold around 10 sec until the cam says "reset back to factory default settings" keep holding it until it said "wait to be configured" then released.
I have a wifi smart camera but there is no qr code sticker ,someone remove that paper from camera ,now how I connect camera to mobile or how i get that qr code
I have inserted the SD card, the app says that there's 59 gigs available, the problem is when I try to review any photos or recording under 'Cloud Service', I get an error 'No query to the message' even though I have paid the subscription for 6 months. I have also selected 'Format SD Card' on the app to ensure it's in the correct format. I would appreciate any help in resolving this.
@tastyboyncw hi there, just saw your comment. For playback video. Tbh i never use cloud service. But, all i know is. This type of camera can only read maximum 32 GB memory (never tested iy with higher then 32 GB also). U can try to use 32 GB memory then enter the camera then hit the gear icon (upper right corner) from there you should be see "storage managment". If the memory is properly installed. U can see the detail of the memory settings & information. 😊 After completed the setup for the memory. Simply press playback (left side of the mic icon in live view mode). Then you should be able to see your recordings. Hope it will help 😊
@Josephine Kane Sorry for the inconvenience, this video is supposed to be visual only. There's no guide by speaking in this video. For more detailed video, you can go to my other video through this link th-cam.com/video/wVSUNlpvBu0/w-d-xo.html Thank You ;)
The night vision sensor is placed right above the camera (that tiny circle hole) try to closed it with your fingers. See if the IR led showns up (purple lights) around the black body around the camera. If not working. It looks like there's a problem with the camera hardware.
hi guys, i am so sorry for late reply. For new video setup method. Try this new video that i've made th-cam.com/video/wVSUNlpvBu0/w-d-xo.html Hope it will solved your problem ;)
u mean by. U disamble the sd card from the cam and use card reader to watch the recording on your laptop or PC? Somehow, after the sd card inserted into the cam and u want to watch the recording on your pc or laptop using card reader. The memory card cannot be detected (i believe that the cam have their own format other then FAT32 & NTFS like generally we used for hard driver and phone).
@toxic_girl simply go to cam apps then open your cam then click on the gear icon (top right corner) then select "general about device" then select device time. it will sync to internet time.
Is this camera also for longer distances ? Or just inside your own home, on your own wifi ? When I am away from home and I want to log in to my camera I get an error code 999935000. Can anyone please tell me what this means ?
@dita van stripriaan, art i don't think so. Because the hardware is oldies & only support 2.4 GHz frequency. But, it still can be worked normaly if you have 4G or 5G frequency wifi.
Hi Good day. I have installed this cam and also I have a shared user (using temporary login). But now, I want to delete the shared user but I cannot find the function to delete the shared user. I have done a reset but after that when I connect back with my phone (registered user) the shared user can still view the cam. Any idea how to delete a shared user?? Thank you
Hi there mate ;) Sorry for late reply, have you tried to delete the cam from the shared users phone? As far as i know, once you've paired your phone to the cam & reset it back to factory default (cam) or uninstall the apps from phone then install it again, it will automaticly detected the last connected devices. So, the solution is. Delete the device (cam) from shared phone then uninstall the apps. Then try to install the apps again, see if its still detected your cam. It Should be fully removed the devices now. Let me know the results later ;)
Hi Good day Thank you for your reply. Yes, if delete the cam on the shared user phone is OK, no problem. But what if the shared user are not around anymore, eg someone just disappear, LOL. Do you understand what I mean? Some one, shared user, is your friend now, so you allow them to share the cam but later they are not your friend. So how to delete them?? They definitely will not allow me to have access to their phone to delete the cam & also they are nowhere to be found. That is the problem I am having. The only way is to remove the cam & not use it anymore. Even resetting it will not do any good. Because the serial number is LOCKED inside the shared user phone. There must be a way to delete shared user WITHOUT SHARED USER phone physically. ???? right?? Hope some one can give info on this. Thank you & have a nice day.
putianren ah.... try this method then. Since its an ip cam type. Try to change ur wifi password. Ip cam needed correct wifi password in able to be use normaly & streaming while we are outside (using phone mobile data to connect) or even we r inside the range of same network (using home wifi). If u change ur wifi password & setup a new connection to the cam. Then the other phone won't b able to stream to ur cam anymore since the password has been change ;)
Hi Good day. Thank you for your prompt reply. Changing WIFI password is also a not good idea as I have many devices connect to the wifi using Mac filtering. I am not using one 360 cam but many to replace my CCTV using port forwarding > DYNDNS Very tedious to do so. But it could be best thing to do if no other choice. This is just a shortcoming of the app creator. Anyway, thank you my friend for answering my problem. Have a nice day
Tzuby Tj I been quick formatting it and keeps doing it. must be the app icsee in play store I plug in the sd card and it says d:/ is not accessible the volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted message from Windows 8. and then I unplug it and put it back on camera, it still got all the recordings through the application. so should I buy the ultra sd cards or is it the app
Sergio Figueroa ah... try to install vlc media player then use vlc to play the video format on ur pc ;) Or.... try to use the sd card into other gadgets for example ur phone. If ur phone can detect the sd card video. Then, it must be the card reader or the sd card adapter problem. I'm having that's issues once & finally notice that my sd card adapter is broken lol.
Hi, camera is working fine just cant sd card installed on the camera, keeps saying: Network connection timeout, please try again Error Code:- 10005 Can you please advise what format maybe as im using 2gb card?
@ash islam Hi there mate, sorry for late reply ;) The working micro sd card format for all type of cctv is FAT32 (like mostly storage format). Have u try with another sd card? Or can u stream the video when you'r outside the cctv network? For example, u'r cctv is connected with u'r home wifi then u open the apps using u'r phone mobile data. If can't, then the setup is failure or not complete yet. Try to restart the cctv by pressing & hold the reset button behind the cctv for about 20 seconds then release. Then do the Setup again ;)
J'ai achete une camera ICSEE, je ne recommande pas du tout. Le mode d emploi est en anglais. Le boitier de la camera est bas de gamme. Il n'y a pas de detrompage pour la carte sim. Impossible de la connecter au WIFI, et pourtant je ne suis pas un debutant dans le domaine. Ne pas acheter cette camera, en plus pour 60euros, pour moi c'est poubelle direct. :(
Garis Design & Konstruksi CV. Have you tried to reset your wifi or internet connection? Since this is an ip type camera, so it needed an stable internet connection to works ;)
yes I did......i dont know why, but it cant connect....... then, i just waste the time and money...... its better if the product coming with barcode and/or serial number.....anyway, thanks for your reply. appreciated
Garis Design & Konstruksi CV. Have you try to reset the cam back to factory default settings? There's a tiny button and have reset letter (mostly placed behind the cam or some models are placed under the cam). This reset back to factory default setting is kinda tricky. Press & Hold the reset button around 20 seconds then relesase it until the cam says "wait for wifi configuration" then delete the device in your phone then try to reconfigure it again. This method mostly works for all brands of ip cam. ;)
I’ve tried all Day to create account. Keeps Saying passwords don’t match. Or user name needs Chinese symbols or some crap. Going to send this camera back to amazon and delete this. What a waste !
@nadia rivera sorry bout that. I have another video while i'm talking. Here's the link th-cam.com/video/wVSUNlpvBu0/w-d-xo.html Ps : sorry for my bad english
I bought it some years ago. Worked at first. Then came in the closet and now I wanted to use it again and can’t get it on wifi. When I read it can’t connect with the wifi from now 2021. Don’t like that. Is there no upadate?
@dita van stipriaan hi there. Have you tried to hard reset the camera? Can do it by press and hold the reset button around 10 seconds until the camera promt "reset back to factory default".
After that, try to re-setup the camera again.
Hope it will works 😊
@@5u8y86 yes I try’d but didn’t helped. So it is going to the bin 🙈 and I don’t like that. But it doesn’t do anything anymore. The strange thing is, it did worked. But I think the routers have been a lot faster nowadays (??). Bought it 2 or 3 years ago. So the program from this product is to old and need an update
@@Dita66 hi there. Sorry for late reply.
So, it did worked now? Yeah, the software is kinda outdated. The developer never do any update anymore 😢
@@5u8y86 no didn’t worked. 😢
I;m using ICSEE for 4 cameras, we are trying to share it with our parents in the other side of the world, we create an account for them and check the sharing cameras before, but when they enter to their account the device window is empty, i opened here and I can see the cameras. also they use our administration login and it is the same, they have an empty device list
our camera connected once last night now it won't again, we're not doing anything differently what could be the problem TIA
@catherine lawrence hi there, have you tried to restart the cam? Can simply restart it by unplug the power cord then wait for 10 second then plug it again.
i ave this exact camera and app. But as good as the quality is, the camera itself just picks up so much noise that I cant even hear what someone is saying at the front door? Is there a way to minimize the backgroud noise or i guess to turn the Mic down?
hi there, thanks for commenting in my videos.
i don't think there is no options for turning down the mic volume since it only have on / off option for the mic. ;)
If I start ICsee with with my Account login and my Remember PW I will not find any Add my camera, If I log out is the same. What shall I do? it will be nice to add to your presentation how to add second camera.
Hi there. Sorry for the late reply. Okay, will make the video soon 😊
I m not installinf properly.wifi is not connecting what I have to do .plz tell me
do you have stable internet connection both in your home and phone? bc, it needed a stable internet connection to connect ;)
I cant find the reset button, and it wont detect my qr
the reset button should be around the cam. Look carefoully all around the cam. There should be a tiny hole. Press the tiny hole using pinset / paper clip / needle then hold around 10 sec until the cam says "reset back to factory default settings" keep holding it until it said "wait to be configured" then released.
How to add an additional camera that is on a DIFFERENT WIFI network?
i'm not sure, i have not tried that before. But, looks like it's kinda impossibe to do ;)
What to do when it's written offline, it was working before. Thanks
Try to restart the cam by unplugging the power supply then wait around 10 sec the plug it in again 😊
HELLO.
Did the wi-fi connection fail?
To improve the 3g / 4g network.
how?
? What do u mean? You can't connect your cam using mobile data?
@@5u8y86 it was not possible to connect to the system because the internet was weak. I was able to connect to another WI-FI.
tenk yu.
No wifi 5g
because, the cam is not supported for 5G network.
I have a wifi smart camera but there is no qr code sticker ,someone remove that paper from camera ,now how I connect camera to mobile or how i get that qr code
@sony virk hi there. have you tried to connect the cam via wifi network?
@@5u8y86 when I on the wifi in phone then no any signal of camera link in wifi
I download a app 380
@@5u8y86 when I open that app then app need scan to camera qr code but that sticker of code is removed and lost
@@sonyvirk556 it seems like u have downloaded a wrong apps. the apps im using in this video icsee
I have inserted the SD card, the app says that there's 59 gigs available, the problem is when I try to review any photos or recording under 'Cloud Service', I get an error 'No query to the message' even though I have paid the subscription for 6 months. I have also selected 'Format SD Card' on the app to ensure it's in the correct format. I would appreciate any help in resolving this.
@tastyboyncw hi there, just saw your comment.
For playback video. Tbh i never use cloud service. But, all i know is. This type of camera can only read maximum 32 GB memory (never tested iy with higher then 32 GB also).
U can try to use 32 GB memory then enter the camera then hit the gear icon (upper right corner) from there you should be see "storage managment". If the memory is properly installed. U can see the detail of the memory settings & information. 😊
After completed the setup for the memory. Simply press playback (left side of the mic icon in live view mode). Then you should be able to see your recordings.
Hope it will help 😊
What does Tone mean when you are the basic setting ?
Tone? Did you mean that chinese language sound?
Why is there music on background cannot hear a word on how to do this
@Josephine Kane Sorry for the inconvenience, this video is supposed to be visual only.
There's no guide by speaking in this video.
For more detailed video, you can go to my other video through this link
th-cam.com/video/wVSUNlpvBu0/w-d-xo.html
Thank You ;)
My camera night vision and lighting system are not working
The night vision sensor is placed right above the camera (that tiny circle hole) try to closed it with your fingers. See if the IR led showns up (purple lights) around the black body around the camera. If not working. It looks like there's a problem with the camera hardware.
I have a new wireless router and even for factory reset it won't connect. The qr code doesn't work either.
What size sd card does this camera use
hi guys, i am so sorry for late reply. For new video setup method. Try this new video that i've made th-cam.com/video/wVSUNlpvBu0/w-d-xo.html Hope it will solved your problem ;)
why i cant open at the computer, registration of the memory card camera's?
u mean by. U disamble the sd card from the cam and use card reader to watch the recording on your laptop or PC?
Somehow, after the sd card inserted into the cam and u want to watch the recording on your pc or laptop using card reader. The memory card cannot be detected (i believe that the cam have their own format other then FAT32 & NTFS like generally we used for hard driver and phone).
@@5u8y86 I am having same problem
Does needed a modem to connected camera to phone-cell ??
Muhamad Iqbal yeah... u need an stable internet connection In order to stream the video to ur cell phone
This app no longer available on app store how do I download it?
scan the qr code using bb barcode scanner apps. the qr code should be available outside the box or in the manual book.
How to change camera time?
@toxic_girl simply go to cam apps then open your cam then click on the gear icon (top right corner) then select "general about device" then select device time. it will sync to internet time.
Is this camera also for longer distances ? Or just inside your own home, on your own wifi ? When I am away from home and I want to log in to my camera I get an error code 999935000. Can anyone please tell me what this means ?
It can be use while u'r away from home too as long as both your cam and phone have an stable internet conmection.
لازم وضع باس وورد او اميل مش عارفه اشغلها
Is there an update to 5g or 4g???
@dita van stripriaan, art i don't think so. Because the hardware is oldies & only support 2.4 GHz frequency.
But, it still can be worked normaly if you have 4G or 5G frequency wifi.
How do we connect second mobile to same camera
In the 2nd camera or more. Select add shared camera then follow further instructions.
Hi Good day.
I have installed this cam and also I have a shared user (using temporary login).
But now, I want to delete the shared user but I cannot find the function to delete the shared user.
I have done a reset but after that when I connect back with my phone (registered user) the shared user can still view the cam.
Any idea how to delete a shared user??
Thank you
Hi there mate ;)
Sorry for late reply, have you tried to delete the cam from the shared users phone?
As far as i know, once you've paired your phone to the cam & reset it back to factory default (cam) or uninstall the apps from phone then install it again, it will automaticly detected the last connected devices.
So, the solution is. Delete the device (cam) from shared phone then uninstall the apps. Then try to install the apps again, see if its still detected your cam. It Should be fully removed the devices now.
Let me know the results later ;)
Hi
Good day
Thank you for your reply.
Yes, if delete the cam on the shared user phone is OK, no problem.
But what if the shared user are not around anymore, eg someone just disappear, LOL.
Do you understand what I mean?
Some one, shared user, is your friend now, so you allow them to share the cam but later they are not your friend.
So how to delete them??
They definitely will not allow me to have access to their phone to delete the cam & also they are nowhere to be found.
That is the problem I am having.
The only way is to remove the cam & not use it anymore.
Even resetting it will not do any good.
Because the serial number is LOCKED inside the shared user phone.
There must be a way to delete shared user WITHOUT SHARED USER phone physically. ???? right??
Hope some one can give info on this.
Thank you & have a nice day.
putianren ah.... try this method then.
Since its an ip cam type. Try to change ur wifi password. Ip cam needed correct wifi password in able to be use normaly & streaming while we are outside (using phone mobile data to connect) or even we r inside the range of same network (using home wifi).
If u change ur wifi password & setup a new connection to the cam. Then the other phone won't b able to stream to ur cam anymore since the password has been change ;)
Hi
Good day.
Thank you for your prompt reply.
Changing WIFI password is also a not good idea as I have many devices connect to the wifi using Mac filtering.
I am not using one 360 cam but many to replace my CCTV using port forwarding > DYNDNS
Very tedious to do so.
But it could be best thing to do if no other choice.
This is just a shortcoming of the app creator.
Anyway, thank you my friend for answering my problem.
Have a nice day
putianren ah... okay. U'r welcome mate ;) enjoy u'r day too ;)
This app no longer available on app store does anyone know about it??????
same problem here please help downloading the app for a new phone
is it wise to put your wifi pasword in. bit worried about that and have access to my phone. what about hackers
It's okay. I'm not using that cam anyway. Just helping others to do the setup 😊
can i use de camera with noip server?????
I don't think you can do that. Since it needed a stable internet connection 😊
I'm having issues reading sd card says inaccessible wrong file system on pc after motion detection recording on cam
have u tried to format your sd card? Because, most of the problem related to that issues is from corrupted sd card ;)
Tzuby Tj I been quick formatting it and keeps doing it. must be the app icsee in play store I plug in the sd card and it says d:/ is not accessible the volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted message from Windows 8. and then I unplug it and put it back on camera, it still got all the recordings through the application. so should I buy the ultra sd cards or is it the app
Sergio Figueroa ah... try to install vlc media player then use vlc to play the video format on ur pc ;)
Or.... try to use the sd card into other gadgets for example ur phone. If ur phone can detect the sd card video. Then, it must be the card reader or the sd card adapter problem.
I'm having that's issues once & finally notice that my sd card adapter is broken lol.
I canot conect qr code ... my camera misicue not scane the code...what is a problem ? It s not good camera or ?
@Marko Markovski Hello there ;)
Can u please tell what phone are you using?
Hi, camera is working fine just cant sd card installed on the camera, keeps saying: Network connection timeout, please try again Error Code:- 10005
Can you please advise what format maybe as im using 2gb card?
@ash islam
Hi there mate, sorry for late reply ;)
The working micro sd card format for all type of cctv is FAT32 (like mostly storage format).
Have u try with another sd card? Or can u stream the video when you'r outside the cctv network?
For example, u'r cctv is connected with u'r home wifi then u open the apps using u'r phone mobile data.
If can't, then the setup is failure or not complete yet. Try to restart the cctv by pressing & hold the reset button behind the cctv for about 20 seconds then release. Then do the Setup again ;)
What size 23rd card u used cuz mine don't fit bout a regular i think 64 card
ازاى تدخل على عمل الفيديو اذا كانت الكاميرا تسجل على ميمورى
hi there, use english please. I can't understand arabin language. Thanks ;)
J'ai achete une camera ICSEE, je ne recommande pas du tout. Le mode d emploi est en anglais. Le boitier de la camera est bas de gamme. Il n'y a pas de detrompage pour la carte sim. Impossible de la connecter au WIFI, et pourtant je ne suis pas un debutant dans le domaine. Ne pas acheter cette camera, en plus pour 60euros, pour moi c'est poubelle direct. :(
Is it work with jio-fi directly??
Yes it can 😊
Sorry for late reply 😊
How do I hear my volume out the camera
U mean how to adjust the cctv sound volume? If yes, then it can not be adjusted.
How can it
Can we use this intercom ?
Yes
How do I add a second camera?
same way like when u'r adding the 1st one ;)
please tell me this camera model....?
I dont what's the model. All i know is the cam is using icsee apps.
i can connect camera with router, but i cant pair the camera with the phone, HELP my router huawei b315-9da4
sajmon5740 do you have the correct apps for your camera?
iCsee pro, doesn`t work, and now apps V510 , but when I make router with my phone, all work correct. ;/
sajmon5740 can u please tell me what is your ip cam brand?
Since it needed a correct apps with the cam so it can works normaly.
HAHA I dont know how. But camera is working . Thanks for help :)
Why I cannot connect? =((
hendrik ang do you have same model & brand like the 1 in video?
Why in quick motion?........ Next!
u know u can slow down the playback speed right? ;) not meant to be rude, but just wanna tell u sir ;)
Mine won't scan any QR codes no matter what angle I'm at.
do u have the correct apps?
Try to use this method. i just uploaded new video how to connect your phone without qr scanner.
th-cam.com/video/riaaf4_4a1g/w-d-xo.html
جميل
Ok
Ma a questa app non funzionano le notifiche?
Pardon, english please 😊
@@5u8y86 Notifications do not work switch this application, can you switch apps?
Did u mean the icsee apps notification?
no connection even try many times.......damn camera!!!!!
Garis Design & Konstruksi CV.
Have you tried to reset your wifi or internet connection?
Since this is an ip type camera, so it needed an stable internet connection to works ;)
yes I did......i dont know why, but it cant connect....... then, i just waste the time and money...... its better if the product coming with barcode and/or serial number.....anyway, thanks for your reply. appreciated
Garis Design & Konstruksi CV.
Have you try to reset the cam back to factory default settings?
There's a tiny button and have reset letter (mostly placed behind the cam or some models are placed under the cam).
This reset back to factory default setting is kinda tricky.
Press & Hold the reset button around 20 seconds then relesase it until the cam says "wait for wifi configuration" then delete the device in your phone then try to reconfigure it again.
This method mostly works for all brands of ip cam. ;)
This has happened to me too. I just brought one and can't get it to connect.
Anastasia Sobolewski hi... can u tell me what is the apps name for your camera?
the barcode can't read by the camera, I'm tired to hold my phone to the camera -_-
Leli mcg if the cam can't scan the barcode. Do it manually. I'll make another video tomorrow.
Tzuby Tj , Ok thank you 😊, I'll be waiting for the video 😅
Hi there, here's the new link for manual configuration.
th-cam.com/video/riaaf4_4a1g/w-d-xo.html
could go slow I not still getting I want work for me
try this method. I just uploaded the new video about how to connect your phone manually, without qc scanner.
th-cam.com/video/riaaf4_4a1g/w-d-xo.html
Como puedo recuperar mi contraseña y cuenta...
Error Code:-604402 5043
I’ve tried all
Day to create account. Keeps
Saying passwords don’t match. Or user name needs Chinese symbols or some crap. Going to send this camera back to amazon and delete this. What a waste !
Same problem cannot even create an account both user name and passwords have numbers and characters nothing works.
mann wird nichts erklärt da sagt ja keiner was
I can't login in account password problem
can't login to your icsee account? try to forgot password. usually you will have an email confirmation.
Mera koee opstion hi nahi aa raha hai
? english please ;)
It dont help much when you dont talk…
@nadia rivera sorry bout that. I have another video while i'm talking.
Here's the link
th-cam.com/video/wVSUNlpvBu0/w-d-xo.html
Ps : sorry for my bad english
Waste of time and money
不可以
mine wont do that , junk
Cole Slaw hello... can u please tell me what brand of the ip cam u'r using? See the descriptions in u'r manual book.
hi there, try this method th-cam.com/video/riaaf4_4a1g/w-d-xo.html
Bhai ji password brake karna tha
Hi There, english please. Otherwise sorry i can not help ya ;)
just reset the device by using reset button, aik pin find karo our hold karo pin for 5 seconds in reset button main.
আপনাদের সাথে যোগাযোগ করার নাম্বার পাওয়া যাবে
Ok