Free Energy from the Ground Wire 😃 The Energy of Earth / errant electricity
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2024
- Support us on Patreon: / kreosan
═════════════════════════════════════
Links
► VK group - kreosann
► FACEBOOK - / kreosann
► INSTAGRAMM - / kreosan
► Me - kreosan
► Advs here - id63520946 - วิทยาศาสตร์และเทคโนโลยี
Kreosan: free energy!!
**Electroboom would like to know your location**
The Rectifier
@desertrat810 That's true, but it will be quite entertaining to see a video by electroboom explaining what is happening in Kreosan's video. And when did something being unsafe or illegal, ever stop Electroboom? ;)
This could work but it s not free so it s just wireless
Someone call the rectifier.... We need his thoughts on this topic
The rectifier
This is very underwhelming intro. Do it again
ＴＨＥ ＲＥＣＴＩＦＡＩＡＡＡＡＡ
I just wired a new off-grid home for someone including solar. There were two ground stakes about 60' apart and I already knew about this effect described in the video. I explained to the customer all about the binding screw in the electrical panel and why it's used to negate this "free energy" from the Earth. But I also told him that we could instead hookup a transformer and take that power as well.
Am I stupid to think the grounding rods (grounding stakes 60’ apart) are incase of an over-surge of power happens and to prevent arcing/fires??? Isn’t that small amount of lost power happening because you need a current open incase you need to dissipate a large amount of energy, and if you put a transformer in there first wouldn’t you need a large enough transformer to handle the entire electrical load of the house/ lightning strike to prevent overload/fires?? Second wouldn’t the transformer do nothing as you still have the same power output? Like for example if you are planning to hook your idea up to say the solar system’s battery even with the transformer an over surge of power would fry the whole thing (and aren’t those ground stakes what are supposed to prevent that exact thing?)??
Update, researched it, um you should be fired.. because for anyone else curious, the answer is yes the grounding rods are there to prevent fires…
Also what wattage are you thinking you’re going to pull?? (I’ll tell the rest of you know it’s probably no more than .02 Watts, 2 watts seems astronomical compared to my calculations but found a few who claim such high numbers (this being from ground batteries, ground batteries being the only source of energy that you aren’t yourself adding to the system))
Over 45 years ago my physics teacher said it was possible to obtain unmetered electricity from between neutral and ground. Due to the small voltage we thought it would not be of any use but I guess it was this he was talking about.
in Russia everything is possible
Also notice how no advancements in technology to make this better has been made. On purpose Of course and now they're going to use the ignorance of the population to control them.
That was before smart meters. You used to be able to just use a metal rod in the ground as your neutral and trick the meter this way
@@spackerinternational6131 meters have always read from the line conductor not neutral.
@@robintodd3901read*
😅
If you used a voltage regulator and a charging circuit to a battery you could have enough storage to collect the variable source and regulate it to then use in a controlled manner... Would be cool to see you expand on this setup.
wow
1:02 removes the plug and memorize the wire to make sure he will never forget which one is
XD jup and when he flips the plug then he's fucked XD
@@johanneshettinga yea crazy
Yeaaa 😂😂😂😂😂😂😂
for real 🤣🤣
There is always induction going on in walls, paint, pipes. To test this you need to either turn all breakes off or better go outside into woods and test the grounding theory. Leds are sensitive to smallest inductions in wires/walls, at home I have led bulbs on wall in corridor and they give glow durring night even through all lamp switches are off, but the moment I turn off all power breakers in home it goes dark. If you live in apartment building the induction might come to you from neighbours via pipes.
At least you understand there is something fishy going on here. The two wire set up has one hot and the other ground. The other appliances in the house are using the ground so there will be some voltage there as it works it's way to the ground rod. All this guy is doing is giving that residue voltage an easier path to ground. Like zibi said. Cut the power to the house and his little light will go out.
That water pipe looks like it either came from Chernobyl or an archaeology display. I'm not sure which.
Maybe an archeology display *from* Chernobyl. :p
It came from a building supply and it’s black pipe.
It seems like everything looks that way over there.
🤣
Crimson Halo / have you looked at the houses people are living in NORTH AMERICA?
That's just inducted power between the bonded conductor and system ground. It still happens on the consumer end of the meter and you are still billed for it.
Ці русские показали як красти електроенергію, українцям соромно за їх злочини.
@Bot Fap, a good attempt by the russian occupier on Russia. And remind me who paid Ukraine for the stolen gas before concluding a new contract for the supply of natural gas from Russia to Europe.
No, the voltage of 2.3volts AC is the potential difference between the two earth's points. There is no meter to measure current between the two earth points, only active to earth is metered current.
No, the voltage of 2.3volts AC is the potential difference between the two earth's points. There is no meter to measure current between the two earth points, only active to earth is metered current.
No, the voltage of 2.3volts AC is the potential difference between the two earth points. There is no meter to measure current between the two earth points, only active to earth is metered current.
this man has a superpower to get transformators out of radios within 5 seconds
Its a russian radio so what do you expect
They drop like panties at a Tom Jones concert
Try making a series of earth battery outside the home with the series of battery in a straight line pointing North to south or south to north depending on where you live. Carbon and magnesium rods connected together with say some wood paneling in between as an insulator so they don't make contact to each other and corrosion will stop.
Semiconductor sheets. Silicone membranes.
@@FRESNEL_COOKING_SOLAR_OVENS24 yeah… do the calculations, our earth’s diameter & minimum rod length to be effective… you will know it’s impossible & we need huge industrial hammer to drive those rods(it’s in kilometres)… good luck…
The neutral wire is carrying the load current back to the power source which is grounded to earth and the cold water pipe. This current causes a small voltage drop across the neutral wire at the load and ground at the source. You are connecting an additional load cross that small voltage drop yielding a few watts of power which you are being billed for. Also a shock hazard and violating purpose of the ground wire. It’s only to carry current during a fault to protect from shock if the hot wire leaks current to a metal enclosure and you touch it and ground.
My conclusion here is the ground wire that you took from the wall outlet has this 2.6 volts due to induction between phase and ground wire because of the load that you have at home.. try to turn off your main braker see if you still have this 2.6 volts. The thing is if you are using digital electric meter you are still paying this 2.6 volts..😪
Nothing to do with induction and everything to do with resistance. Specifically the resistance between the actual ground and the return path of the neutral wire or an alternative ground.
More energy experiments from ground or from atmosphere please! Thank you!
I’ve been reading on Nicola tesla and according to him there is approximately 1volt of electricity per square foot on the earth. So in theory a 10 foot copper antenna could produce 10 volts of electricity.
It has to be resonated. It also has to be converted to scalar.
spot on! would love to see a p.w.m led setup using this....@@fusebox41
Also from sea but it doesn't last tha whole day
Yeah! Thanks I remember Nicola Tesla was saying we can get free energy. But I think it was not this way but rather somehow capturing the radio waves or energy waves out of mid-air..
Tesla was talking about the gains obtained by transmitting scalar energy. It travels at 1.5 times the speed of light. Because of this the output increases by 1.5 at the receiver. Multiple receivers can be set up and hooked together for an additive effect.
Another reason for the potential in metal pipes may be due to many parasitic currents in the ground from old neighboring electrical installations.
This may work in the Ukraine because the meter measures power through the phase wire only and no RCD. In UK for example if you do that the RCD will trip. And in any case a modern meter measures consumption through both phase and neutral, so you would still be charged for that, no free power :)
Here in America, I remember during the 70's when my Mom needed the fridge moved I'd get shocked; pushing the fridge with one hand & holding sink faucet with the other hand; well, that explained grounding! OUCH, hahaha.
Yes sir
Here in Bulgaria, this worked up to the end of the 90s. But with the new millenium came new power meters :D
However even back it then it was not used at all, as there were ways to actually cheat the power meter, and get as much power as you wanted and not paying for it :D
@Promotional Inc. like puting the neodium magnet to stop meter turning
@@nenadlacmanovic3046 That was one way... The other way was the so called "bridge of friendship" where with a certain wiring setup you could rewind the powe meter.
It’s not a ground wire it’s a neutral wire. If you are getting electricity from an actual ground wire then you have a serious wiring problem in your house.
Dj Badbones Neutral wire doesn't have a potentional but I think that the boiler is broken So actually they Are Getting a phase.
Not grounding
They're getting the high potential between the water pipe and house neutral, in other words there's a fault somewhere allowing this to happen more so if they can draw several watts from it. I've got a few volts max between neutral and earth at the wall outlet, if I allow them to touch the RCD trips. I love having safe electrical distribution here and every piece of piping has a low impedance path back to the earth-neutral bonding point where the power enters the house.
This is probably not in the US, and using a TN-C classification/configuration with a combined neutral ground.. in the US the “free power” equivalent would be the residual power being produced/expelled from devices connected to a system being sent back to the bonded neutral and ground at the first point of disconnect. Possible to use it yea.. is it viable? Maybe in some off grid setups that aren’t regulated by NEC and local/state codes. Is it stable? Definitely not, the fluctuations will be based on your current overall draw on the system and will be majorly variable and unsafe under most circumstances. I could see such a thing being used in conjunction with a charge controller to store residual ac into dc batteries. Such as regenerative alternators on an electric car, same concept?
You guys are so resourceful and I appreciate your knowledge
You should store it into capacitors ...then draw the power back from the caps.
Do more videos like this.
You can't store alternating current in a capacitor
@@joecummings1260 Even rectified? ;)
I love how he calls being shocked "catching a lightning"
🤣🤣🤣
Now that's the job for the 'RECTIFIER'
Medhi be hero
Ya maybe full wave rectifier can work
FULL BRIDGE RECTIFIER!
... and if the voltage goes too high, the RECTUMFRYER!
The led cob lamp is designed for AC... As in a normal lamp holder, not DC. There is a small switch mode psu in the lamp!
this seems like a job for
T H E R E C T I F I E R
And he did it th-cam.com/video/-9tQSHvy-Ko/w-d-xo.html
Yuuuuus!!!
True
Fooool bridge rectifier
You can make the current more stable by adding a suitable capacitor between the positive and negative terminals
not for this setup
why not? @@RightlyFree
@@albertbas2837 because it's AC?
Your telephone socket can provide quite a bit of power in an emergency too!
Kreosan: Free electricity!
RCD: no
Wire that shorts the RCD: Yes
@@josefaschwanden1502 Wires*, one wire would trip the RCD lol.
@@uK8cvPAq my fault
@@josefaschwanden1502 I see what you did there.
ukraine ≠ rcd
👌That's true, I did try out the experiment and it works as shown. With much voltage fluctuations though. I have a 12-0-12 step down tx that I used to step up if that makes sense, well as used in the video and the max voltage I recorded during the experiment was around 70v. Tried an led lamp and it lit not bright though with huge fluctuations.
Employing a full wave rectifier with a capacitor across the zero and tap earth and using a boost converter to output around 24v steady voltage, can that voltage be used like a solar charger?
That was my thoughts, if you could get this to feed a larger storage system it would be pretty great for low power devices when you need it.
@@dangerouskoin4874 Use it to trickle charge an Anker, Jackery etc. I've just got into stuff like this, not much room to get good solar (in winter I might only get 1-2 hours of direct sun where I can fit a panel), thinking of small home-made wind turbines.
I've seen some houses that back onto decently deep little "storm drains" that seem to flow constantly with water from somewhere. Imagine setting up a kilowatt water wheel, you'd be laughing. Especially with a low-power heat pump meant for a camper, totally free heating and cooling (in one room, anyway)
I enjoyed your vidio its the first one that explains what your doing,the other ones no talking,or explanation of what there doing thanks
With some extra capacitors and resistors, you can make this a little more stable. I wonder if this could be enough to charge an emergency power battery over a while? It would be some trickles of power but hey.... after a while you would still get some power into it for later use.
no need for resitors a capacitor is also a resistor
@@cassdroid2183 if it dries out, yes :3
This is a ground loop. It is not free but leaked energy from reversed ground somewhere in the area.
To them is free.
@@suprememasteroftheuniverse you don't pay for that , so yea :D
Any free power is good power and I bet this happens everywhere
@@garystinten9339 If if only available if your neighbors wired their house wrong. This is the point.
@Ancient Link it happens on all "proper wiring" due to the inductance picked up on the neutral wire. The neutral wire is tied to ground and is at ground potential at that point, down the line inductance creates some potential on the neutral wire with respect to ground.
I would like to see electricity recaptured that is lost from overhead high power lines. :)
BTW love your channel!
But it's not lost. This is just letting voltage leak from the live wire.
@@voltariantechnologyinc.8594 they dont "let" it leak, they can't stop it from leaking. The point though is to reclaim the leaking/lost electricity ...
High tension lines are best left to the pros !
@@stewartcaldwell5299 the person is saying they would like to see a method of collecting the ambient electromagnetic emanations from the powerlines and putting them to practical use.
They are pro's they say in nearly every vid 😁
Power is delivered to towns with 3 phases. The high voltages are transformed to a low voltage and finally using delta configuration transformers to a star configuration with a neutral point at the centre. The 3 phases are shared out to try to even the load in them and any inbalance gives rise to a neutral which floats from an ideal zero volts. This is what is being used here in the video.
The stability of this source will depend on the stability of all the loads in your house or apartment. If you turned all the loads in your house off there wouldn't be any "free" energy anymore since you are taping a voltage drop over the resistance of the wiring in your house. The higher the load the more voltage drop is generated.
Here after electroboom's video👍
LMAO 01:48 "Let's open this up...carefully. "
Entire device just crumbles apart lol.
That was already open and just to show on cam.
One way to get some free power is a telephone line. On hook is 48vdc, off hook is 3-9 vdc and ring voltage 90 vrms ac 20 hz. So technically the phone company charges you for outgoing calls, flat rate for certain number of local calls, unlimited calls, etc... if you use available voltage for lighting a few LEDs is it stealing?
"now we insulate the phase wire"
*Accidentally flips plug*
this would cause modern ground fault circuit interrupters to trip though
You think they have GFCI Outlets there?
@@splatink My RCD only reacts to imbalances between phase and neutral. Earth is not monitored. Are you sure Earth wire current would trip it?
@@Tore_Lund If there is a current between neutral and ground, there is an imbalance between phase and neutral.
@@jusbenaattori Oh yeah, that is true. So presumably where Kerosan lives, if he were to mount a RCD, it would instantly trip even if his in house wiring is flawless? What type of fault is this, is the neutral line not fat enough to handle the return current in the neighbourhood, or is it a phase load mismatch in the area?
@@Tore_Lund It would trip if the neutral and ground are shorted after the RCD, but that should not happen, so the RCD should function normally. I don't know why there is a potential between ground and neutral, it could be a number of reasons, for example just induction from the house wiring. EDIT: Thought more of it, the induction should affect the neutral and ground about the same so that would not make such a big potential difference.
This is awesome. Thanks for the vid
You need to put a coil around each of the supply wires on the street side of meter. Then you get more power than what you're billed for.
Do you think a small regulator would have made the power more stable ?
And steady ?
The title should be turning wasted potential energy into usable energy.
Technically the title isn't wrong though
@@shaneintegra But tactical many people doenst watch videos with the heading "free energy"
@@JeverPils "free energy" videos are actually popular. Most of them being fake though
0m3n “Free energy” is a myth. Energy has to be pulled for it to be pushed. Most “free energy” ideas use magnets to pull, but air and other forms of resistance absorbs the energy as heat and slows it down until it meets and equal librium.
Michael Frith How does high and low pressure create energy and what’s the median to deliver the energy? “Free energy” usually refers to solid-state or constant moving devices that provide unlimited electricity with no resistance which is bullshit as resistance is all around us. Resistance is futile!
This shows that the house ground isn't sufficient or the wiring isn't sufficient causing a loss in the wire. Everything running on the circuit is drawing more current to make up for the voltage loss in the wire or the bad ground rod.
1:08 takes note of which is the phase wire.
Unplugs the reversible 2 pin plug
0:51 thats the only time thats been said on this channel 😂
Keosan:entred the chat
The rectifier:quit the chat
maybe you could try something more original than a repeated comment from every other youtube video?
@@iamthetinkerman shut up envy
@@anas8183 Ana's rage quit
@@iamthetinkerman haha shut the f up
Well done. Please include a diagram of how to create what you just created. Thank You
I was thinking about this same idea for years. But I didnt know would it work or hiw to test it. Now I know I was right and that I just need transforem. Great video!
Good boy,I had faith in you just by dress code and the way you presented.You were well prepared and you didn't waste my time by showing us the components for 5 minutes before starting the project,thank you. Be good
One of my ideas is a ball bearing motor with a oversized flywheel for pulsed dc to keep the bearings cool. Then have two faraway homopolar generators coupled to the ball bearing motor. Have large capacitor banks it can draw from so it can build up the DC pulse. Good luck
HOW ABOUT A BEARING THAT NEVER TOUCHES ANYTHING NEVER NEEDS LUBRICATION,LOL AIR IS THE BEARING HYDRO POWERED BEARINGS OF INTELIGENCE,ATOM ACTIVATED.
@@atomatman3104 🤷♂️
Most power companies do the same thing with the power in your home, the send it back to the plant where they reuse it and sell it back to you or someone else...
Very good. You have a proven concept there, some better equipment would help. Maybe a tesla coil could ramp up the voltage. I think the key thing here is that multiple connections like this one could charge a large battery array and then "trickle" charge it, 24/7/365.
Connect Telsa’s hair pins circuit to it
You could use Thevenin's theorem in order to calculate maximum power you can harness. First you measure the no load voltage (electromotive force) (Vnl) between neutral and ground. Next, you short circuit neutral and ground and measure the current (Isc). Now you know that the internal impedance of your source is Vnl/Isc. It is known that maximum power is transmitted to a load when the load impedance equals internal impedance of the source. If for example Vnl=2,5V, and Isc=2,5A, internal impedance (Zi)=1 ohm. If you hook up 1 ohm of load, the total circuit impedance is 2 ohm. The current which starts to flow is 1,25 A, so the apparent power across load is 1,25^2*1=1,56 VA. I wonder how much current starts flowing when you short circuit ground and neutral.
wow impressive
A man of knowledge. : )
But is not neutral supposed to be connected to the ground already ???
@@En_theo Yes it is. But when you ground something at two different places you are creating an alternative path for current to flow. Thats an earth loop. I dont know what level of knowledge you might posses, but in LV distribution neutral is connected to the soil around the substation. It is done in order to stabilize the voltages of live conductors to earth. If you have an ungrounded grid and a thundercloud approaches, then you would get a lot of static electricity on your powerlines and it would make what is called an arcing ground fault, basically a short circuit that starts and stops hundreds of times in a second and then destroys all insulation if not properly handeled. When you ground a circuit you eliminate static eletricity, but in case a live conductor touches the ground a current starts to flow. Soil is semi conductive, so around the place of fault there are step voltages, and so a live wire lying on wet soil can kill you eventhough you arr no where close to the metal. Now neutral wire is at ground potential only at the substation. If load is assymetric, or there is third harmonic, then there is current in the neutral. Wire is made of copper and when there is current running in the wire there must be voltage across the wire. It is called. "galvanic" induction. So when you connect neutral wire to the ground wire,and ground wire is just a wire that connects to you local soil around your house, then a current starts flowing because your soil and substation soil are connected with, well, soil. So normal path for a electron is transformer->phase wire->load-neutral wire->transformer, but if you connect neutral to earthe, the the path becomes: transformer->phase wire->load->neutral wire->ground wire-local soil-substation soil->transformer. It's is a very difficult subject, i hope ive explained a bit.
@@TinG-hz7fm
I understood most of it (I guess). But then; since the neutral is connected to a substation, are we sure that somehow that current won't be accounted in our bills ?
What happens if we connect several points in the ground ? Shall I get more power ?
If you attach a capacitor in series maybe it will be stable. Thanks for sharing. It's very useful.
Whether from a ground fault, induction, etc. It all depends on having a source in the first place. If ur doing it as a prepper, youll probobly be seriously disappointed if the grid goes down and there is no source to begin with.
Between the ground and the neutral there is a small voltage created by the loads of the neighboring houses .. (The neutral is grounded far enough away from our house ..) This voltage is exploited by the Ukrainian .. It is neither constant nor continuous ..
You've got it plugged into a wall. The end.
Thank u for posting this video, it was very insightful.
It's not free energy as in perpetual motion machine but it's free as in you aren't being billed for it. The current from the neutral wire (sort of remote ground) to earth (local ground), since never travels to the meter (which has only phase and neutral) hooked up, you are not billed for it.
I would love to see how innovative you are by making a super simple wifi jammer!
Literally just make antennas
I've seen other videos where people collect .4 to 1.2 volts from a ground rod driven into the earth at any location, so I can understand that the copper water pipe is acting as a longer ground rod (perhaps why you got 2 volts instead of 1 volt or less). Assuming someone tries to connect an LED light or other DC device (so no DC to AC inverter is required), I have a few questions: 1) What capacity transformer did you need to be able to get to up the
electron flow is through earth, air or a conductor grounded, but it must b connected to the load and as the voltage flows towards the ground whatever u do and as long as thr is a reisistance connected2 load and then grounded on the neg, and cap between the pos and ground+ load and depending upon what voltage the load would function u would need to have the frequency and watts calculated for the cap va
Capacitive coupling from nearby power lines or radio transmitters.
This is the same effect you may have seen where someone has an tube light bulb and when they walk under high tension power lines the tube lights up to some degree
These are the things you should be doing instead of asking them.
errant electricity 😂 from the errant guy
Check out the ROSCH 15kw electrical gen - its runs off the gravity field using alternating densities (submarine technology) the device is 10 m by 1m water filled pipe.
I wonder what the potential would be at the ground of the main panel and a direct zinc ground? Also I wonder if surface area would help or kill this circuit, like using the ground wire from one end of your house and Earth ground trying to catch all the grounded electrons in the house?
John Hutchison had great videos how he performed propulsion and levitation
The standard for electric wiring in your country makes me shiver.
Me too. I was like is that a bulb socket or extension cord?
My wife is from Ukraine, typical of wiring in older buildings. We had laptops going at a hotel (very nice hotel btw), but no grounded outlets. We would get shocked if we touched both laptops. Wiring is 240 vac on top of that. Why no structural fires on the hour, every hour is beyond me.
That wiring in you're Country is very
Skittish,!!! I have two friends who are
Brother's... They told me all about the
Power There. It's ALL 220 VOLTS....
When they first started sending stuff bome, to indea" everthing would burn-up
Soon as there family would 🔌 plug it in & turned it on. MOSTLY VCR's sent home by them to different family members.
Until one day they talked to me, about it & I realized what they had Ben doing.lol
I saw that they were sending 120volt
stuff from HERE to THERE.... I explained
what was happening & helped them
Find a (step down" Tranformer).. & explaned what was causing the problem.
But this is CRAZY! 😲 the ground wire, Haveing enough, to power a step - up
Transformer that it could do real work.
I MEAN most of the time, when doing something like this, it won't power any kinda load, ( soon as anything is connected to the wire), it dropps the voltage like a ROCK FROM THE SKY.
ANYWAY" This is GREAT,!!! KEEP WOKING ON IT, AND MAYBE" SOON!
You will be able to CHARGE a bank- of
Batteries, that is powering a big ol' inverter that can Run you're WHOLE
House.
It's really not free energy . Did you see the plug that was across to the other side so what he did was was plugged the the cord into that so you have two wires one has 240 v and the other is ground wire . The hot wire on to the transformer and then he grounded the transformer on to the pipe . He showed us the pipe but didn't show us the other wire going to the other hot . It's all about deception .
@@MyIronman8 Its not, but its not free either. There is allways a small voltage between the neutral wire and ground when you have consumers draw current. It is because of the neutral wires own resistance. Tapping into it creates a parallel line back to the transformer.
Supposedly protection CB at the distribution transformer will work and trip power. Because the value of current drawn from phase line is not equal to current returned by neutral line.
Means if he withdraw more power like that, power should trip from the whole village. Maybe
It is not that free when the source of that electricity has already passed through your meter. The neutral conductor is providing an electrical path back to the power company. Believe it or not the power company's generator is already connected to ground. They are in essence pumping the electricity from the ground and returning it to the ground (50/60Hz). It is a closed loop. All you are doing is returning it to the ground at a different location (your house) by creating a ground fault path when connecting it to a pipe that is buried in the earth.
You should create a circuit and connect a wire to a kite or a pole and the other end to ground and measure the atmosphere energy
@Johnny AppleStead yeah you should check out ion power group
@@QueueTeePies capacitors will be needed yes. You can also increase efficiency by using an insulated wire and applying graphite spikes to the end in the air I think. A friend said you can use a UV light on activated carbon to make nano tubes which night be effective at pulling ions from the air
Not really safe what you are doing.... The voltage between neutral and earth can fluctuate a lot and not really stable. It's basically based on the wire resistance in the TN-S network.... (I'm guessing this is what you have)
@@davidvarnai7654 no. Ummm independent from the home system. I'd recommend a separate grounding rod so there's no influence from the mains power
You mean radiowawes
it isn't free. it's still being drawn from the live wire, which is paid for.
It's depend on the metering system .
Rock on. That was epic when u guys was on the feriswheels with LED strip. Fun times
You're pretty smart guy. Consider here in the USA we only use 110 volts in our houses and 220 is just for appliances. That information should help I think. Also, you should use the volts to charge a car battery and get your power from the car battery so it will be consistent. Use a dc to ac converter to convert it back to a usable 110 volts and buy American stuff that works on 110 volts. Viola, you have accomplished what you are trying.
Maybe add a capacitor as a battery so you can use it more stable when you turn on the light
please dont give him any idea's
Thanks! I have found some helpful information on this video which I think is helpful for those learning about this.
I am an electrical engineer and watching this is truly a freud.
Fraud........ electrical engineer.....hmm
You mean fraud? Yiu jess keep enfinering while we electricians play with the backfeed
Wooow. This is great. New learning here.
There is no such thing as free DC and AC electricity. Electricity is a form of energy, and energy cannot be created or destroyed, it can only be converted from one form to another.
🙂
This is best way to speed up deterioration of local ground electrode in TT system. 👍
0:37 wonder what the inside of that pipe looks like?
spot on! would love to see a p.w.m led setup using this....
Would you get more usable power from a larger grounding grid ? For example a deep single point or straight line with three driven rods, or a buried counterpoise-style delta grid ?
nope
Hi!
Really cool channel. I'm watching from france. You guys are awesome.
About the effect on the led: I's a combination of the frequency of the electric network, and the rolling shutter of the camera. The led lights up for half a period, and the rolling shutter picks up the light when the led is on. As it's not instantaneous, the led has the time to be lit and estinguished during the Y scan of the shutter.
Have a great day.
the price is safety and I am pretty sure you still have to pay for the energy in the end becuase you are drawing current from the meter in the end through the neutral wire
Not true. No metering of earth leakage current between earthing points. Only metered current is between active and neutral. Please do further research.
Potential difference between earth points is well known by electricians. Ask your mate who's a sparky. 👍
@@davidwatkin1484 I think electroboom explained this more eloquently in a video after I wrote this coment
BRILLIANT !!! thankyou
Yes, you are correct. Next time try to put an antanna high in the air as you can, especially under a power line and test the voltage difference between your antanna and the ground
Use a bridge rectifier and a capacitor to smooth out the ripple. 👍🏻
You just experienced a ground loop - a dangerous situation caused by improper house wiring.
The best sistem for destroy the pipeline with electrolysis ,half century ago in Italy with big capacitor put in ground and in line was possible send counter the measure of the rig for the cost of pay ! It is beautiful to see this clever boys,thank you for your videos .
You Guys are Brilliant !!!
In this instance it would be considered "free" because you aren't taking voltage directly from the mains power, rather the ground which wouldn't be tracked by most authorities. Kerosan never fails with the smart videos!!!
Yes it would, it just reduces the output somewhere else.
It's not free and its not from the ground, it's "stolen" from his own instalation, only reason it happens it's because his own instalation is not properly grounded, he is taking some voltage lost in his own instalation via devices plugged. And maybe from his neighbour cause what he is doing is making additional grounding to the transformer, is in fact energy lost in "ground cable" N that is connecting transformer nearby with other people or his home. There is nothing free there he will be charged for this as well, because thanks to this voltage on mains L connection will rise a little bit. THere is nothing free here, it cannot be replicated except home with bad instalation
@@KabelkowyJoe thats actually what i meant, i think it was early morning when i was disagreeing though as i didnt explain things.. i was meaning to say yes it would take energy from the supply and cost money as a result.. theres nothing for free of course
@@KabelkowyJoe Exactly! He likely is running something akin to a transmission line where he is basically connected to the main via the magnetic field in the wire. He could likely coil his system around a ferrite core and see an increase in "free" energy as it would help he capture more of the magnetic field of the mains AC pulses.
@@KabelkowyJoe Exactly. The situation can also be created to a degree, even if your home's wiring is to code, but is coupled to the plumbing of a neighbors home with improper wiring.
This should trip your RCD, if you have one…
Definitely
They don't and its not free energy, resistance to earth ground will still be measured
Having power there means your system is not grounded properly. What you are seeing is voltage being induced onto the ground wire because it is close to the phase wire. Trust me, use it regularly and it will show up on your electric meter.
Theres always going to be a small potential on the neutral, except for right at the point where its tied to ground.
Great video man. I wonder if it could be scaled up? Thanks.
This is the oldest trick in the electricians book, the volts are generated between the earth connection and the impedance of the earth/neutral wires, the amount of volts generated in the neutral wires is variable and alters depending on the amount of loading in the property's circuit, E.G no load no volts.
He don't understand that.
Can you get a magnet motor to actually work?
😂 free electricity until they turn off your electricity for not paying the bill. 😂
i think you should go to the main panel and find out which circuit is feeding the ground.
is stray voltage really free?
This should also work if you put two metallic rods of reasonable length (~1m) in reasonable distance (>100m) into the ground. The earth is full of parasitic ground currents from the civilisation. Thats the reason why there are ground bars that ground the electric installation at a single point. Otherwise you can get electrocuted if you touch/connect two different "grounds".
If a high voltage line falls to earth, it's possible to be electrocuted just by walking toward it due to the voltage differential between your feet as you step. Example: One foot could be on a spot measuring 100,000 volts, the other could be on a spot measuring 95,000 volts leaving 5000 volts to pass through your body.
However, what you propose is not possible under normal circumstances.
Show the voltage on oscilloscope how it looks O:)
Nah its 100% *pure sign wave*
Exactly
It would just be normal 50 HZ sine wave
So in theory, this would work if the electricity was turned off to the house, correct? But in practice, with the house’s power turned off either at the main box or by the power company, this does not work. So if the power is on to the home, and this does work, it would then be billable correct?
This is a good idea and thanks for sharing your thoughts and great video