Love the opening shot! You continue to find deals all over the world! If the shipping to USA was better it would be a goldmine! Great looking set of darts for sure. I’m still on the fence about changing weight with tungsten inserts and putty. That’s just me as I’m sure it works just fine for those wishing to do this.
Worldwide; another great video. Like you I hate the silver points on the darts. I normally change out the points to some specialty points. Thanks and keep the videos rolling.
Just perfect timing for this video. I am looking to buy the new One80 Panther-X but they come in 21g and i would like to add 1g to them. I was wondering how to do☺️☺️... by the way you need to do ABSOLUTELY a review on them, because they look awesome (no Lip dart and also at a very convenient price) 🎯🎯
Funny enough I just got an email this morning from Dartshopping telling me that the 21g version is back in stock. I have them in my cart now so I should be pulling the trigger shortly. I just have to find some other stuff to go with it. 👍🏻
So I just ordered the Harrows Predator, and they were on sale for $45. But they only came in 21 and 25 on the sale price. I prefer 23. But I will have to wait until they come in, so I can see how far they've been drilled out, and I remember you doing a video on this, so half an hour later I found it. I'm just trying to find the tungsteen weights. 👍
Interesting. You'd have thought putting weight in the back would have made the darts go in flatter. However I have a few front weighted darts and they all go in flat for me. Doesn't seem to matter what flights I use or what points as well, they all go in flat. My other Achilles Heel is I often throw high darts which then get in the way, or even worse, go out of the board. I was shockingly bad on Saturday. 😒
I think you can change the behaviour of that dart by using only one insert. If barrel is empty, the mass is divided almost equally, just like if it wasn’t hollowed at all. But if you only put in one insert, the balance will shift towards the front and should lead to a more upright angle in the board.
Great tips! I also had the Jose Type2 soft tip darts was thinking the same... but I wonder how to remove the putty as it stuck within the barrels? As I might need to try around 20G/23G. thanks
20 seconds in and it’s Tops Tops Tops! Amazing worldwide. Also- was watching your K- flex Vs condor axe earlier and you were talking about the specialty points needed. I’m new to darts, does that mean i need Swiss points to change them? And also, where can up I buy them? I’ve looked in many websites and can’t find them idk why. I’m new to darts so I apologise if it’s a dumb question
No dumb questions around here. A lot of this can be confusing. Swiss points can only be used on Target darts that have a special threaded front end. The points I'm talking about are something like this... www.doubletopdartshop.com/collections/dart-points-1/products/target-storm-black-replacement-dart-points Those are a Target Storm point that is flared. That flare eliminated the lip where the point meets the barrel. These points can be used on almost any set of darts however it requires a repointing tool and those can be quite expensive. It's almost easier to just buy any set of Target darts that have Swiss points and use a Swiss Storm point as seen here... th-cam.com/video/WR-Ta_tOAI8/w-d-xo.html
This is gonna sound weird but with regards to your stiff board: try leaving it out in the sun for a few hours. When I wanted some mould on mine gone, I left my blade 6 out and when I put it back up, my darts seemed to go in deeper. Maybe worth a shot?
Hey worldwide i recently got a repointing tool a mission one and first time using it i span it till it clicked and i thought i broke it when i heard that.😅 but now im a little but worried if i should not do it like that or if its okay to do that thank you 🙏
@@WorldwideDarts no i dont think so i think it was the repointer itself but that was the first time using it but it worked perfectly fine after but we loosened and tightened the points again i was just wondering if it was meant to do that 😂😂😂
I have a couple questions, but I'm not sure where to start. What if you put the putty in the front before you put the weights in? Would that make it more of a middle weight or rear weighted barrel, and I live in New Mexico. Where the humidity is like 0 and like, for instance, right now. It's a 107° outside. Does the puddy dry up to where if I start throwing, it will rattle like a Morocco?. Love the education. By the way, thank you so much. You always take that extra step to inform us.
@@ronsmith9593 The main goal is to be able to easily remove anything you put inside of the barrel. That's why the putty goes in last. But no, nothing would change if you put things inside the barrel in a different order.
Love the opening shot!
You continue to find deals all over the world! If the shipping to USA was better it would be a goldmine!
Great looking set of darts for sure. I’m still on the fence about changing weight with tungsten inserts and putty. That’s just me as I’m sure it works just fine for those wishing to do this.
Worldwide; another great video. Like you I hate the silver points on the darts. I normally change out the points to some specialty points. Thanks and keep the videos rolling.
Cheers Mike 👍🏻
don't like the silver darts either
Those barrels look fire 🔥
They're sooo nice. For some reason I struggled with them all day though. Usually I can throw a longer barrel pretty good.
*This link work? - Amazon Japan* tinyurl.com/5933b54k
A very rare no boom 180 🎯🤙 Good stuff as always. I like fiddling around with darts too.. later! 😂
Cool little trick. Might come in useful for me one day. Just got my Condor Axe 120's today and i'm quite impressed. They perform well!.
Imagine that Peter Wright not only changes his darts but he changes weights inside his darts and adjust the balance points, in every single leg.😂
Just perfect timing for this video. I am looking to buy the new One80 Panther-X but they come in 21g and i would like to add 1g to them. I was wondering how to do☺️☺️... by the way you need to do ABSOLUTELY a review on them, because they look awesome (no Lip dart and also at a very convenient price) 🎯🎯
Funny enough I just got an email this morning from Dartshopping telling me that the 21g version is back in stock. I have them in my cart now so I should be pulling the trigger shortly. I just have to find some other stuff to go with it. 👍🏻
So I just ordered the Harrows Predator, and they were on sale for $45. But they only came in 21 and 25 on the sale price. I prefer 23. But I will have to wait until they come in, so I can see how far they've been drilled out, and I remember you doing a video on this, so half an hour later I found it. I'm just trying to find the tungsteen weights. 👍
Awesome video as always WWD be safe out there
your throw is wild :)
Interesting. You'd have thought putting weight in the back would have made the darts go in flatter. However I have a few front weighted darts and they all go in flat for me. Doesn't seem to matter what flights I use or what points as well, they all go in flat. My other Achilles Heel is I often throw high darts which then get in the way, or even worse, go out of the board. I was shockingly bad on Saturday. 😒
I think you can change the behaviour of that dart by using only one insert.
If barrel is empty, the mass is divided almost equally, just like if it wasn’t hollowed at all.
But if you only put in one insert, the balance will shift towards the front and should lead to a more upright angle in the board.
Hey would you have any interest in doing a review on the Perfect 9 Stu Wilson 2.0? Interesting set of darts
BOOM!
Great tips! I also had the Jose Type2 soft tip darts was thinking the same... but I wonder how to remove the putty as it stuck within the barrels? As I might need to try around 20G/23G. thanks
To remove the putty just use a drill with a tiny drill bit. Very slowly screw into the putty lodged in the barrel and it comes right out in one piece.
wrong buy the hevier weight then chuck them up in a cordless drill take a file and sharpen the grip till they are the weight you desire.
20 seconds in and it’s Tops Tops Tops! Amazing worldwide.
Also- was watching your K- flex Vs condor axe earlier and you were talking about the specialty points needed. I’m new to darts, does that mean i need Swiss points to change them? And also, where can up I buy them? I’ve looked in many websites and can’t find them idk why.
I’m new to darts so I apologise if it’s a dumb question
No dumb questions around here. A lot of this can be confusing. Swiss points can only be used on Target darts that have a special threaded front end. The points I'm talking about are something like this... www.doubletopdartshop.com/collections/dart-points-1/products/target-storm-black-replacement-dart-points
Those are a Target Storm point that is flared. That flare eliminated the lip where the point meets the barrel. These points can be used on almost any set of darts however it requires a repointing tool and those can be quite expensive.
It's almost easier to just buy any set of Target darts that have Swiss points and use a Swiss Storm point as seen here... th-cam.com/video/WR-Ta_tOAI8/w-d-xo.html
@@WorldwideDarts Thanks so much! Legend
This is gonna sound weird but with regards to your stiff board: try leaving it out in the sun for a few hours. When I wanted some mould on mine gone, I left my blade 6 out and when I put it back up, my darts seemed to go in deeper. Maybe worth a shot?
It's supposed to be 90° today. It might be a good time to bake my board 😁
Wat a great video 🎉
Thank you 😁
Could you place the putty between the two weights? Would it come out as one piece after?
You could but the entire goal is to be able to easily get everything out. I would only strongly recommend doing what what shown here
Hey worldwide i recently got a repointing tool a mission one and first time using it i span it till it clicked and i thought i broke it when i heard that.😅 but now im a little but worried if i should not do it like that or if its okay to do that thank you 🙏
Uh oh! Have a close look at the barrel. Did you crack the barrel?
@@WorldwideDarts no i dont think so i think it was the repointer itself but that was the first time using it but it worked perfectly fine after but we loosened and tightened the points again i was just wondering if it was meant to do that 😂😂😂
Haha skipjacked 👍
Stupid board! 😂
I have a couple questions, but I'm not sure where to start. What if you put the putty in the front before you put the weights in? Would that make it more of a middle weight or rear weighted barrel, and I live in New Mexico. Where the humidity is like 0 and like, for instance, right now. It's a 107° outside. Does the puddy dry up to where if I start throwing, it will rattle like a Morocco?. Love the education. By the way, thank you so much. You always take that extra step to inform us.
@@ronsmith9593 The main goal is to be able to easily remove anything you put inside of the barrel. That's why the putty goes in last. But no, nothing would change if you put things inside the barrel in a different order.