The Biggest 3D Printer We’ve EVER Assembled (And It’s Fast!)

แชร์
ฝัง

ความคิดเห็น • 36

  • @Enjoymentboy
    @Enjoymentboy 6 วันที่ผ่านมา +2

    Ah...bed leveling. I spent a solid 4 hours last week trying to get the best level I could after I finally upgraded the klipper. I managed to get it to a total max deviation of 0.093mm. That's the best I could get.

    • @torquemada1971
      @torquemada1971 6 วันที่ผ่านมา +2

      That would be outstanding on any printer, let alone one this size.

  • @HubiniGaming
    @HubiniGaming 5 วันที่ผ่านมา +1

    Bought the printer from your website and I love it. I have just one question do u have standard profile settings on ur slicer and which slicer do u use elegoo slicer or orca ?

    • @3DJake_Official
      @3DJake_Official  3 วันที่ผ่านมา +1

      This time we used Elegoo Cura and the generic profile was used but we almost exclusively use Orca for everything in the workshop so for future prints we would be using Orca - there is already a profile for it there.

  • @ShamimHaydee
    @ShamimHaydee 4 วันที่ผ่านมา

    Thanks for the breakdown! I need some advice: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). What's the best way to send them to Binance?

  • @tobiasit1743
    @tobiasit1743 6 วันที่ผ่านมา +1

    geil mann, Steiermark 😍🙂👍🏻

  • @chrisgenovese8188
    @chrisgenovese8188 7 วันที่ผ่านมา +16

    you should get a 3D scan of yourself, and then print a 1 to 1 version of you.

    • @TheOfficialOriginalChad
      @TheOfficialOriginalChad 6 วันที่ผ่านมา

      I think he’s over 1000mm tall.

    • @chrisgenovese8188
      @chrisgenovese8188 6 วันที่ผ่านมา

      @TheOfficialOriginalChad I assume anyone would understand it would need to be done in a few pieces. Well, almost anyone.

    • @anonim1133
      @anonim1133 6 วันที่ผ่านมา

      @@TheOfficialOriginalChad sitting cross-legged should fit. And used more than one plate.

    • @TheOfficialOriginalChad
      @TheOfficialOriginalChad 6 วันที่ผ่านมา

      @ haha I love the idea of cross legged 😂😂
      Not more than 1 plate though. Any printer can do that, and many faster.

    • @TheOfficialOriginalChad
      @TheOfficialOriginalChad 6 วันที่ผ่านมา

      @
      why would you want to showcase a large print bed by printing something that doesn’t fit on the print bed? Literally any printer can do that.
      Why insinuate someone is dull for thinking that’s not a great idea?

  • @TheInsaneupsdriver
    @TheInsaneupsdriver 6 วันที่ผ่านมา +1

    guy at work won a bid on a white knight belt printer. something like 500mmx400mmx unlimited... as for printing, a Ork Rok from warhammer 40k comes to mind... you might be able to print in in 6 or 8 prints.

  • @CRMessen
    @CRMessen 6 วันที่ผ่านมา +1

    You should print a teaching aid, like an otto motor split in half, or a jet engine demonstrator. You could donate it to the local school too.

  • @thomasjandl4134
    @thomasjandl4134 7 วันที่ผ่านมา +1

    Ich würde mir damit ein Lego Gokart in Echt drucken. Bin da zwar nicht der Erste, der diese Idee hatte aber es ist einfach die ideale Anwendung für einen Drucker dieser Größe.
    P.S. cooles Video - habe endlich das korrekte Leveln von dem Monster verstanden 😁 Sehe ich das richtig, dass bei 4 Köpfen die Druckplatte zwangsweise SEHR genau gelevelt sein muss und das nicht per Firmware ausgeglichen wird?

  • @GenX3Dprints
    @GenX3Dprints 5 วันที่ผ่านมา

    Your mama so big she was printed by the elegoo orange storm giga 😂

  • @Silverstar1995
    @Silverstar1995 6 วันที่ผ่านมา

    You could print up actual furniture with that thing. If I ever get my hands on one, that's what I want to do. NIce, big, single unit panels for surfaces, it'll be so nice. You could move into a new home, print up bespoke furniture to stylize your home to your environment. Get some real biodegradable filament (not the industrial breakdowns needed for PLA), and you could plan your furniture for the eventual breakdown and keep things fresh, always.

  • @Roskellan
    @Roskellan 2 วันที่ผ่านมา

    What to print suggestions, Ok. A standard Benchy, regular size. And why. well it should be as good as a regular printer, and if it isn't - well that wouldn't be good 🙂 Nice workspace there (not the printer the room).

  • @lcitters
    @lcitters 7 วันที่ผ่านมา +1

    print some motorcycle parts! A frame, for testing, this would be perfect. Some wheels, or fairings

  • @Vojtasak-mk4
    @Vojtasak-mk4 6 วันที่ผ่านมา +1

    you should print a 1000% dummy 13!

  • @jasmingolubovic493
    @jasmingolubovic493 6 วันที่ผ่านมา +1

    You could print star wars pit droid or b1 battle droid
    on etsy droid division

  • @OnkelPunkrock
    @OnkelPunkrock 6 วันที่ผ่านมา +2

    Benchy.. A big Benchy.

  • @Those_Weirdos
    @Those_Weirdos 6 วันที่ผ่านมา +1

    2:50 My guy, read the boxes in the future.

  • @user-lx9jm1wo3h
    @user-lx9jm1wo3h 6 วันที่ผ่านมา +2

    The title should be: The Biggest 3D Printer We’ve EVER Assembled (And It’s Fast!)

    • @3DJake_Official
      @3DJake_Official  3 วันที่ผ่านมา

      Fair point, we're changing that, thanks :)

  • @quadcorei8085gen2
    @quadcorei8085gen2 6 วันที่ผ่านมา

    video starts at 8:25

  • @Jacked3DPrinting
    @Jacked3DPrinting 6 วันที่ผ่านมา +1

    Print-in-Place Skateboard that you can pick up off the bed and it's ready to roll pls bro pls

  • @ichlebe5355
    @ichlebe5355 6 วันที่ผ่านมา +1

    You can print that on a kobra max i think

  • @DreamsVoid
    @DreamsVoid 7 วันที่ผ่านมา

    What you should print? Oh that's easy...
    A giant sized PrintABlok 😂

  • @raphaelk00
    @raphaelk00 7 วันที่ผ่านมา +1

    you could print the smallest person in the office

  • @collie147
    @collie147 6 วันที่ผ่านมา

    A tank and play war games with Ivan Miranda

  • @kinanhloubi1935
    @kinanhloubi1935 6 วันที่ผ่านมา +3

    Sorry, but do you call this a nice print? I find it a bit weird that you didn't mention any negative things about this printer... AND disappointing! What about the ringing in the vase? What about the layer adhesion? I know 3DJake sells this printer obviously. But that's not the way to promote it without saying the obvious negatives that we literally see in the vase model... sad.

    • @KABAR1943
      @KABAR1943 6 วันที่ผ่านมา +3

      Its not a review though lol