Cute little cart design and some nice techniques for the joins (the bends in particular for avoiding open ends). Minor suggestion if you plan to ride that on a dirt road - a mud guard to keep dirt out of the air filter - it's probably going to get covered in mud on a wet day. Nothing you can't handle yourself, obviously. You could have saved yourself having to weld the sprocket on that (blue bike frame) rear wheel by mounting the motor on the other side and just using the original rear sprocket thread on the right side rear wheel (pink bike frame) - just a minor thought. Unless you did it that way to keep the chain tucked further away from other people. This concept would be a good use for the pair of 350W electric bike kits I have that will not fit any of my bikes. Since I'll have to build new mounts for them anyway. 1 cart per motor. Now if only the road here wasn't dirt and huge potholes that literally shake glasses off your face as you ride.
Nice only back week run is it not unevent balance ?n ready made wire length not enough for from staring to back weel so how to make long? Please reply n also it weath is enough for one other seat beside driver so balance also equal as one side engieen n tuning weel.main wire problem.nice very nice
Ese proyecto con otro motor en la otra llanta , aumentaría un poco mas la velocidad ?? Quiero hacer un proyecto asi con dos motores d 50cc para viajar 200km
@@filipotv amigo conoces la marca husky quiero comprar Un motor marca husky 210cc 6.5hp sale bueno o es malo? me sale en 83 dollares es nuevo es para un patinete
,Could of been a great idea, but the engine should have been inside the frame not hanging off the side, oh and a brute idea putting the fuel tank right next to the exhaust, apart from that good build😭
When we don't want to pass on what we do, we don't need to post on the internet. If it is to spread the word, we should do it as a conolect. You did a nice job, but did not put the hardware measurements. How are we going to do without them? we will do roughly? poorly done? Think about it. hug
Cute little cart design and some nice techniques for the joins (the bends in particular for avoiding open ends).
Minor suggestion if you plan to ride that on a dirt road - a mud guard to keep dirt out of the air filter - it's probably going to get covered in mud on a wet day. Nothing you can't handle yourself, obviously.
You could have saved yourself having to weld the sprocket on that (blue bike frame) rear wheel by mounting the motor on the other side and just using the original rear sprocket thread on the right side rear wheel (pink bike frame) - just a minor thought. Unless you did it that way to keep the chain tucked further away from other people.
This concept would be a good use for the pair of 350W electric bike kits I have that will not fit any of my bikes. Since I'll have to build new mounts for them anyway. 1 cart per motor. Now if only the road here wasn't dirt and huge potholes that literally shake glasses off your face as you ride.
Trabajas muy bien con cosas simples, eres realmente genial👍
@حسين تحسين tu mamá por si acaso
Best bike .I love it
Excelente, sigue adelante con tus proyectos.
No creo que te entienda parece chino
Impresionante proyecto amigo 👏👏👏
Beautiful
Esta muy vien ese proyecto. ,i con piesas. Sensiyas
Nice job its amazing
It's so creativ and looks so fun to ride
Show!! From Brazil!!!!
Buenos trabajos amigo 👍, que motor le pusistes a este proyecto y donde lo puedo conseguir ?
D. Oo
Doc
es un motor 50 cc
Very good nice video 👍👍👍👍👍📸
Hola que tal. Como te contacto para tu apoyo quiero construir uno pero me gusto el de la banda es mas sencillo sin multiplicador de fuerza
Nice only back week run is it not unevent balance ?n ready made wire length not enough for from staring to back weel so how to make long? Please reply n also it weath is enough for one other seat beside driver so balance also equal as one side engieen n tuning weel.main wire problem.nice very nice
Good idea
Muy lindo quedo. Felicitaciones
Good job
have you tried making an electrick chopper bike? with a fat rear tire?
A qué presión van las llantas 9x3.50-4 de carretilla
Bravo philipo 🇩🇿🇩🇿🇩🇿
Ficou excelente...
Muy ingenioso!
Seus projetos são os melhores
Abraços aqui do Brasil
Parabéns
Vt
Very good work
Tres bon travail
عمل جيد جدا
De dónde eres Amigo?
Love!!!
Imagine what this guy could do with a fully equipped workshop!
What is this tool you're using to heat the metal with
Which part of the bikes was all of that square steel from? Just curious because the title said....
Good job it is best use of waste material in home
טאכ5
.
Mantap... 👍👍👍👍👍😎
Muito bom
Commentaire français j'aime merci pour la vidéo
me interesa adquirir un go kart cmo te contacto??
Hola amigo puedes desir los materiales esta bueno el video
Best bike :v
Perfeto con suspencion
Podrias desir los matereales me gusto mucho el proyecto q
uiciera acerlo
Good job but the gas tank is to close to the muffler
no tengo palabras que supere a un excelente o te lo diria, espero acercarme con un EXCELENTEFELICITACIONES👍👌
Dónde venden el motor?
Hola cómo podría contactarte estoy haciendo un pequeño carro pero tengo problema con la traccion
my favourite channel in this domaine
SUPER
Apart from having the motor side back tire on backwards and the preceding fault findings, good job.
🙌🙌🙌👍👍👍👍👍
Very cool BUT why not 2 motors? Used 2 bikes
👍👍👍👍👍
exelente la falla el ruido al lado
great job
Muy Bueno. donde consigues los motores?
Onde conseguir motor e quanto custa
Excelente felicitaciones desde Bogotá Colombia
Hola filipo! Pudes me hablar sobre los materiales?
0
GG
Hola hermano que motor me recomiendas que sea barato y bueno para mi go kart es mi primer go kart gracias bro
Good
Name of engine please reply for onward subscribe n from where it available n price please. Nice idea.
Ese proyecto con otro motor en la otra llanta , aumentaría un poco mas la velocidad ?? Quiero hacer un proyecto asi con dos motores d 50cc para viajar 200km
ponle un motor mas grande y corre mas
Engine of what is it?
Hola, vendes goo kart??
Where can i purchase that engine i am from philippines
просто молодец слову нет
Pero falto el motor de hoverboar en las ruedas
Bueno desde República Dominicana vende cart
The back right tire is on the rim backwards, the back left tire is the right way , it is pretty cool tho , lol
Buenas noches tengo una mini cuatrimoto no 49 CC pero no se que tiene no arranca le compre pila pero no la carga 🔋⚡ me podrías ayudar
Muy bueno 👏👏👍👍
العمل جميل جدآ ولكن لازم يكون في متر يبين المسافات للمتر والسانتي لكي يستفيد المشاهدين واعطاء الفائده للكل
وعمل موفق
Lo maximo
Best
Que bien amigo , eres de peru
claro soy peruano
Amigo necesito hacer un chasis de un mini Bike , hace trabajos haci , soy de Lima
@@filipotv amigo conoces la marca husky quiero comprar Un motor marca husky 210cc 6.5hp sale bueno o es malo? me sale en 83 dollares es nuevo es para un patinete
👍👍👍🇩🇿🇩🇿🇩🇿🏎🏎🏎
Mantap bro
Hola me gusta mucho me regala las medidas de las piesas que tiene el chasis para hacer uno para mi nieto
👍❤️
Hola amigo de donde eres tu
quả đỉnh
Hola me gustaria seber motor de que es
,Could of been a great idea, but the engine should have been inside the frame not hanging off the side, oh and a brute idea putting the fuel tank right next to the exhaust, apart from that good build😭
Chay nhanh the
Klo ini pake mesin apa ya ka
Precise ang move niya, he knows what to do..congrats.
😀👏👏👍👍🤝
excelente concualkier motorcitos de cortadora de sacaste se puede
Show parabéns
building go kart at home
Quero um
Please product
Where is the break system?
When we don't want to pass on what we do, we don't need to post on the internet. If it is to spread the word, we should do it as a conolect. You did a nice job, but did not put the hardware measurements. How are we going to do without them? we will do roughly? poorly done? Think about it. hug
👍👍👍👍👍👍👍👍👍👍👍👍
Priyanshu
Meus amigo eu estou alperade fiz uma selugia de amputação por dos😍
تعيش
وين ممكن القا زي داك المحرك
Your thumb nail looks as though you have reduced the radius of your turning ability by not having the wheels ahead of the cart frame.
Ked side shear ples
مرحبا
Red button???
زوشو
Hi guys guys and and it it will work out out out out and
H
H. H v h. H. H. H. H H
Saludos muy buen trabajo una ptegunta k tipo de perfil y calibre es??