Dude I really love your videos, this one helped me track down my long problematic PDC, in my case it was 2 problems, front left PDC wire broke, wear and tear, after fixing it, PDC worked well until I fitted the bumper back, then it stopped working again, Right PDC dead. All vibrate when when U put the finger except the right one.... I will buy a new one on Monday, hopefully it solves my problem!
M.Ovidiu always gonna learn something from watching your videos. Why do you take so long to release a video now. But very very informative video as always
Hello! thank you for your appreciation , it is hard to do videos, filming takes time, editing takes time.. if I was doing TH-cam for a living maybe was a different thing and I was probably able to do more videos more often, but at the moment this is a hobby and I doing it in my free time (mostly in the night )!
Interesting. Is it correct for the e60/70 chassis that if a pdc sensor completely fails the whole system does not function anymore? Because this seems to be the case on my e61. And i’ve heard you mention this 3 times now: do not place icom on the floor. Why not ? 😊 Thanks for making these video’s, great learning 👍🏼
If one sensor is bad, the complete system is deactivated, no matter the model , it's a safety thing , about the icom on the floor, Gisle is perfectly right, and there is also the fine dust that is very attracted by working electronics but most important is about respecting your tools!
Hello, How are you statisfied with quality of Hella PDC sensors? I bought a SKV ESEN and it's totally rubbish. Works well like original ones? Thank you
Hi mate I got an x6 m50d and 3 of my rear sensors are showing that something is close beeping and I have replaced them and then on the dashboard it comes up like no pdc sensors what could it be?!Thanks for your advices!
Hello Ovi, I have E91 LCI with Logic 7 audio system. 2 speakers are not working, and in the summer when it’s hot outside sometimes the other speakers are shut down. What can be the problem? Thank you in advance! Really enjoy your videos!
Hello! you need to do a diagnose! I'm not able to diagnose your car without physically seeing it!! Can be a bad L7 amp , speakers, wiring. .hacked wiring...
Did you encountered any problems with Hella sensors in terms of fitment functionality and reliability ? Nicely done, not so clean as you usually do, still good work
Заменил 3 датчика pdc,в Rheingold блок PDC , горит зелёным, но парктроники все равно не работают: Pdc failure, обратитесь в сервис.. Что может быть? Правда смотрел, живые вроде..
Good job, it's nice to see you work so accurately!
Thank you! Cheers!
Love from India🙌🇮🇳. I own a BMW X5 and I have seen a couple of your videos and seeing you work is just a treat to watch. Keep it up👏
Glad you like them!
Dude I really love your videos, this one helped me track down my long problematic PDC, in my case it was 2 problems, front left PDC wire broke, wear and tear, after fixing it, PDC worked well until I fitted the bumper back, then it stopped working again, Right PDC dead. All vibrate when when U put the finger except the right one.... I will buy a new one on Monday, hopefully it solves my problem!
Thanks for the feedback! Let us know if the new sensor resolved the problem .
Thanks I was also looking at how to remove the bumpers and you covered this as well spot on thank you 🙏
Bravo Ovidiu, calitate 👌, nu cantitate 😉💪
Another good lesson, nice movie OVI ;), clean job as always....regards from Poland ;)
Thank you! Cheers!
another great job with a lot to learn!! stay awesome! 😎
You are awesome!
Very good job as always.Keep going.
I like how you check your camera angle with your watch 😁 have a greate day! another good video 🇷🇴
Thanks 👍
Incredible
This is taking proper care of the client. Well F DONE MAN !
Good job
NICE WORK MAN
i love the work you do ... just like i would like work to be done on my car
subbed ya bro
M.Ovidiu always gonna learn something from watching your videos. Why do you take so long to release a video now. But very very informative video as always
Hello! thank you for your appreciation , it is hard to do videos, filming takes time, editing takes time.. if I was doing TH-cam for a living maybe was a different thing and I was probably able to do more videos more often, but at the moment this is a hobby and I doing it in my free time (mostly in the night )!
Salut! Te felicit pentru munca buna ce-o faci! Unde ești in ce oraș?
That grease is dielectric grease. Used to prevent corrosion and help seal the connector. Used on electrical items exposed to atmosphere.
yes probably that was , but you'll use that on ships or in any other field, not on bmw cars
@M.Ovidiu have you done the throttle actuators for the e60 and E9x M5 and M3?
Interesting. Is it correct for the e60/70 chassis that if a pdc sensor completely fails the whole system does not function anymore? Because this seems to be the case on my e61.
And i’ve heard you mention this 3 times now: do not place icom on the floor. Why not ? 😊
Thanks for making these video’s, great learning 👍🏼
In my case, placing the iCom on the floor leads to week wifi connection and on a few occations ... I've stepped on it .... :o)
If one sensor is bad, the complete system is deactivated, no matter the model , it's a safety thing , about the icom on the floor, Gisle is perfectly right, and there is also the fine dust that is very attracted by working electronics but most important is about respecting your tools!
@@MOvidiu Ah ok, didn’t think of the dust. We learn every day !
did you fix the reverse camera and dab faults shown on ista
What's your rivet gun? Is it normal for metal rivets or is it modified/special? Can't find a good tool for doing those plastic rivets :/
It is a normal one that I have modified, but a dedicated one is not too expensive
Can't you put contact grease (i.e. *not* dielectric) in a plug?
Hello, How are you statisfied with quality of Hella PDC sensors? I bought a SKV ESEN and it's totally rubbish. Works well like original ones? Thank you
Best ones are OEM
@@MOvidiu yes, but that price is crazy 😁
Hi mate
I got an x6 m50d and 3 of my rear sensors are showing that something is close beeping and I have replaced them and then on the dashboard it comes up like no pdc sensors what could it be?!Thanks for your advices!
Mine only has issues when I turn the headlights on ????
Hello Ovi,
I have E91 LCI with Logic 7 audio system. 2 speakers are not working, and in the summer when it’s hot outside sometimes the other speakers are shut down. What can be the problem?
Thank you in advance!
Really enjoy your videos!
Hello! you need to do a diagnose! I'm not able to diagnose your car without physically seeing it!! Can be a bad L7 amp , speakers, wiring. .hacked wiring...
Did you encountered any problems with Hella sensors in terms of fitment functionality and reliability ? Nicely done, not so clean as you usually do, still good work
Sometimes is maybe good sometime is maybe s...:)) but! most of the time they are working good!
Can you help E84 2012 Frond PDC code out from module. I have new bumper without sensor ! I wont to left only rear sensor ! Regards
Same issue on my f10 turned out to be the sensor itself
Заменил 3 датчика pdc,в Rheingold блок PDC , горит зелёным, но парктроники все равно не работают: Pdc failure, обратитесь в сервис.. Что может быть? Правда смотрел, живые вроде..
By me is pdc dead you can read the pdc but it doesnr give power to sensors checked fuses they are good.
Probably a shot circuit blown out the internal driver, try to replace the PDC module, but after checking the complete wiring
hy RO ?
To resume : exhaust tips are ugly 😄
Not all only the smoked ones full of soot!