The typing sound for your chat/sub notification thing (I don't know Twitch terminology) is the most perfect typing sound imo. So satisfying. Anyone know what keyboard it is?
interesting. typing sounds on this keyboard is very different from what I used to. I'm a fan of clicky and tactile keys but this sounds good. I would describe it as 'milky' sound. I know it sounds weird but that's the word that comes to my mind when I hear the typing sound here.
28:00 Don't know if Taeha ever looks at YT comments on streams, but as someone who has lived in Texas their whole life: -Austin is expensive and overcrowded with bad infrastructure but it's got good jobs for SWEs and there's always plenty to do. The people get weird, especially the bums but it's honestly about normal Cali level of weird bums based on my trips to Cali. Austin is essentially California in Texas just hotter and with more guns. I grew up around guns and own some though, as did a lot of folks here so just expect that anywhere you go (esp. Fort Worth). -I live in the north Dallas suburbs (Plano/Frisco) and they are generally safe, you can get good internet depending on where you live, reasonable cost of living, and there are plenty of jobs. We are currently booming and will likely continue. It's boring as hell and Downtown is not really any fun unless you have enough cash to live uptown or near Deep Ellum. -Fort Worth is the largest small town you could ever live in and the people are pretty nice (I went to law school there, Texas A&M). The 'cowboy culture' gets a bit oppressive and it's the ONLY place I've EVER been racially profiled out of bars. I'm black and it happened on two occasions at two different bars in the arts district, standard 'dress code' BS even though I was wearing chinos and a button-down with no hat, and on the other occasion I was wearing some shorts. It's cheap and there are jobs, but most of it was Oil and Gas or engineering related. -Don't move to Houston unless all you care about is food. Best food in the state, worst urban planning/sprawl and weather ever. EVER. Also hurricanes. -San Antonio is out of the way of everything and your life will be easier if you speak Spanish, but I frequently go to the wilderness out there to run and backpack because the hills are beautiful. The only natural disaster you'll have to worry about (other than pandemic lol) are tornadoes and extreme heat. Electricity is expensive but solar and wind works very well in Texas and development will likely continue to accelerate.
Hi, I really need help. I just bought a Legion K500 keyboard with red (Kailh I think) switches. But after the first day, I started the notice a spring noise every time I press the buttons. How can I fix this ping noise?
@@hlmrz if you think its coming from the spring and you dont want to lube try a spring swap if its not that it could be a plate issue and you could try a non metal material or try stuffing the case with foam
I just noticed after building that cream don't need films. But inks could have some maybe :D but also yellow inks don't need it too because of design I also think creams > tealios for feel and sound And yes krytox is not that easy to use but it is easy to clean a bit more for me. 3203 cleaning is harder
hi there ! I started off with a velocifire 104 keyboard brown, which was already very cool; Today, I received the durgod K320 white red switch. Wow ! What an amazing difference. Absolutely no wobliness, everything silky soft. So, I wonder how it would feel like to touch a custom made keyboard like you have been building. Am I really missing out or is it a matter of spending 100s of dollars extra for a little amount of better feel & acoustics ?
both, but mostly latter. the appeal of custom is, as the name implies, customization. getting deeper into the hobby ironically results in more experimenting to which leads to more particular tastes and so on, at which point buries you deep in the rabbit hole where the sun doesnt shine after unmoderated investment into the hobby or so i've been told totally not speaking from experience
Does anyone know how to tell if something is within market price in the second hand market/ first hand market? I am new and noticing that some things seems a bit too expensive, perhaps overpriced. Maybe there is a site that I can visit or forum? Thanks!
Hey man was wondering what set of keycaps you use @ 45:29 for your placeholder keys in the streams. I absolutely love the white, grey, and light blue theme and am trying to copy it
Ho guys, just a quick question. How do you keep up with all the various group Buys? I’m kinda new to this hobby and I’m having a hard time to understand this
I understand that the number of switches can be confusing. I only recently got into mechs myself and I still find it confusing sometimes. That said I do feel that having more quality options will always be a good thing. Seems like the custom mech community could do more to demystify all the different varieties of switches though. Just my opinion.
Congrats for 200k subs! I subscribed when it was 199k. While i was enjoying ur videos, saw ur channel hits 200k. You deserve more! Thanks for good videos!!
drgstn. I just started switching over to it about 2 weeks ago and now I can pretty comfortably type at 70-80wpm. Was at around 110-120wpm using a janky 3 fingers on left hand and 2 fingers on right hand technique.
Hello Guys if someone has a good mechanical keyboard either 60%, 65% or TKL LAYOUT at best one that is already finished and which I don't have to assemble myself like you are used to on the channel here would be correct if someone can recommend keyboards or keyboards brands to me gladly also as accessories good keycaps and im asking me if the Ducky one 2 mini is good ?
@ 2:23:05 you imply that aluminium has it's sound signature. As somebody who works with aluminium I need to add that alluminium doesn't have it's own sound. Every alluminium alloy has it's own sound. Some have no ring to them at all, and some ring like a bronze bell.
I love that taecha is smiling in every video and he always looks so happy.
Good job man keep it up and congrats on 200k subs
he seems like the most chill dude. much love man
2:33 lol
@@roguekakashi791 oh
Imagine having so many keyboards that you have to think about which one you’re going to use the next day.
It must suck honestly
Most of them are commissions
Yeah, but he has a lot of his own too. I only have 2 in total, but I have. parts coming in for another one.
Yeah it’s a waste of space and money IMO.
@@lord_haven1114 you can actually make a good amount of money from client builds though, I wouldn’t call it a waste of money.
That finish is insane! Also everything looks good in Olivia 😭
Wish I could get an Olivia in ISO
Or any Olivia really
@@lauridscm1 I'm waiting on my ++ kit! Very excited but also a little scared it'll get delayed again :(
@@fsaidx yeah we should have already received it, but now it is really extended
Me: *watches stream from start to finish*
Also me: *watches the exact same stream on youtube from start to finish*
U got too much time lol
@@LenbIix Lol that's what happens when you're in quarantine during summer break
Roen Medina get a job lmao
@@cwill2127 Lost it because of covid. Feels bad
@@roenmedina3752 feelsbadman I work in a supermarket so I'm lucky
"Im at the position now where I need space" brotha I can relate.
2:34:40 keep it rolling
ima be honest, I hate the sound of that lmao
ProperlyPsychotic especially the space bar 🤮
doing gods work my man
Always nice how you can scroll down on Taeha’s channel and see a time stamp and automatically know what it means. Thanks man
Yo, I dont expect I will really enjoy watching person build custom keyboard.. Nice vids!
I'm not a huge fan of the metallic sound, but otherwise it's a great keyboard! Keep up the great work Nathan!
this is by far my fav sounding keyboard so far personally....sounds so amazing i cant even describe
2:07:07 the cat doe ;-;
56:11 dem cats doe uwu
Man. I need one of these.
The typing sound for your chat/sub notification thing (I don't know Twitch terminology) is the most perfect typing sound imo. So satisfying.
Anyone know what keyboard it is?
I just came across this doing some sound research, and remembered your comment. My best guess: th-cam.com/video/_T6zSYWdWWM/w-d-xo.html
That the most beautiful keyboard I’ve ever seen
CONGRATS ON 200K!!!!!!!!!!!!!!!!!!!!!!
SA: 2:34:40
GMK: 2:47:45
my god the difference between the two is a lot more than i thought
Lol I just found your channel and while I think this is even a little too hard-core for me lol I just find your channel so relaxing 😌
Looking great! Hope all is well Nathan
interesting. typing sounds on this keyboard is very different from what I used to. I'm a fan of clicky and tactile keys but this sounds good. I would describe it as 'milky' sound. I know it sounds weird but that's the word that comes to my mind when I hear the typing sound here.
Congrats on the 200k subscribers
sounds gorgeous!
Just purchased parts for my first custom, and I blame you :(
all the best on your board :)
What did you get and what board are you looking to buy?
9009 looks so goooood
I luv your keyboard builds and vids!❤️❤️
Keep up the good work!
28:00 Don't know if Taeha ever looks at YT comments on streams, but as someone who has lived in Texas their whole life:
-Austin is expensive and overcrowded with bad infrastructure but it's got good jobs for SWEs and there's always plenty to do. The people get weird, especially the bums but it's honestly about normal Cali level of weird bums based on my trips to Cali. Austin is essentially California in Texas just hotter and with more guns. I grew up around guns and own some though, as did a lot of folks here so just expect that anywhere you go (esp. Fort Worth).
-I live in the north Dallas suburbs (Plano/Frisco) and they are generally safe, you can get good internet depending on where you live, reasonable cost of living, and there are plenty of jobs. We are currently booming and will likely continue. It's boring as hell and Downtown is not really any fun unless you have enough cash to live uptown or near Deep Ellum.
-Fort Worth is the largest small town you could ever live in and the people are pretty nice (I went to law school there, Texas A&M). The 'cowboy culture' gets a bit oppressive and it's the ONLY place I've EVER been racially profiled out of bars. I'm black and it happened on two occasions at two different bars in the arts district, standard 'dress code' BS even though I was wearing chinos and a button-down with no hat, and on the other occasion I was wearing some shorts. It's cheap and there are jobs, but most of it was Oil and Gas or engineering related.
-Don't move to Houston unless all you care about is food. Best food in the state, worst urban planning/sprawl and weather ever. EVER. Also hurricanes.
-San Antonio is out of the way of everything and your life will be easier if you speak Spanish, but I frequently go to the wilderness out there to run and backpack because the hills are beautiful.
The only natural disaster you'll have to worry about (other than pandemic lol) are tornadoes and extreme heat. Electricity is expensive but solar and wind works very well in Texas and development will likely continue to accelerate.
Hi, I really need help. I just bought a Legion K500 keyboard with red (Kailh I think) switches. But after the first day, I started the notice a spring noise every time I press the buttons. How can I fix this ping noise?
@@bopbop8179 *Keys/*KeyCaps above keyboard/*KeyCaps on top of switches etc.
@@hlmrz if you think its coming from the spring and you dont want to lube try a spring swap if its not that it could be a plate issue and you could try a non metal material or try stuffing the case with foam
Congrats on 200k subs!
If blowing bubbles was a keyboard this would be it
happy 200k nathan!!! shoot for the stars :D
I just noticed after building that cream don't need films. But inks could have some maybe :D but also yellow inks don't need it too because of design
I also think creams > tealios for feel and sound
And yes krytox is not that easy to use but it is easy to clean a bit more for me. 3203 cleaning is harder
SA: 2:28:00
GMK: 2:47:37
Love the work, keep the content going for us. :)
love the videos and streams keep it up ❤️❤️❤️
Rewatching a full year later just to hear Taeha say the pandemic will be here for a long time - shit he's right
Happy 200k!!!!!
The sound is really good lol
2:27:27 for typing test
where is he taking this typing test do you know?
@@astrarium252 I was gonna ask the same thing xD
He’s using monkey-type.com but I think it’s bugged - I may way more errors on it than other typing tests, just like Taeha is.
@@bren.r no bugs
hi there ! I started off with a velocifire 104 keyboard brown, which was already very cool; Today, I received the durgod K320 white red switch. Wow ! What an amazing difference. Absolutely no wobliness, everything silky soft. So, I wonder how it would feel like to touch a custom made keyboard like you have been building. Am I really missing out or is it a matter of spending 100s of dollars extra for a little amount of better feel & acoustics ?
both, but mostly latter. the appeal of custom is, as the name implies, customization. getting deeper into the hobby ironically results in more experimenting to which leads to more particular tastes and so on, at which point buries you deep in the rabbit hole where the sun doesnt shine after unmoderated investment into the hobby
or so i've been told
totally not speaking from experience
Does anyone know how to tell if something is within market price in the second hand market/ first hand market? I am new and noticing that some things seems a bit too expensive, perhaps overpriced. Maybe there is a site that I can visit or forum? Thanks!
Hey man was wondering what set of keycaps you use @ 45:29 for your placeholder keys in the streams. I absolutely love the white, grey, and light blue theme and am trying to copy it
That's GMK Hyperfuse, not sure which variation if any, but that's the first thing to start with.
@@NTRWeiss thanks man. thank you thank you.
How expensive would it be to get an all brass case for a 75 percent like the gmmk pro or the satisfaction 75 style?
enjoying this while coding :)
Interesting sound from that Keyboard.
Hey i got the hyperx alloy lite rgb and the spacebar is kinda radly, can I do something with that???
Does anyone know what kind of desk mat he works on? I’m tryna find something that’s good as a mouse pad/work surface.
Ho guys, just a quick question. How do you keep up with all the various group Buys? I’m kinda new to this hobby and I’m having a hard time to understand this
Why you use sa keycaps, you said you don't like them?
what progam are you using for testing the keybeard if its working
What is the switches you used in your Sub notification? I love it
I understand that the number of switches can be confusing. I only recently got into mechs myself and I still find it confusing sometimes. That said I do feel that having more quality options will always be a good thing. Seems like the custom mech community could do more to demystify all the different varieties of switches though. Just my opinion.
what typing test did he use in the last part of the video?
monkeytypes
what website or program ddid you use to check your keyboards?
Hey, what type of gloves are you using here? and why?
What keeb is his sub sound? I love it.
Taeha do you not like Ducky keyboards?
What switches should I get on my ducky one 2 mini
if you're gaming I suggest tactile mxbrowns they have a satisfying click thats not too loud and really responsive
If you want lightness and ease when gaming, I recommend silver switches. But if you’re primarily typing, browns are the way to go.
If you were my dad I would go to Home Depot on Saturday morning with you willingly
good job copying a dono message
what can replace krytox 205g0 and 105 as it is VERY hard to find 😭
Why do high end keyboards usually not have backlight?
is there a benefit to a heavy keyboard?
Does anybody know what the blue and grey keycaps are that taeha puts on before the clients keycaps?
Congrats for 200k subs! I subscribed when it was 199k. While i was enjoying ur videos, saw ur channel hits 200k. You deserve more! Thanks for good videos!!
oof lol
does anyone knwo what software is he using for checking the pcb ? Thanks!
how long did it takes u to learn 10 fingers typing ?
drgstn. I just started switching over to it about 2 weeks ago and now I can pretty comfortably type at 70-80wpm. Was at around 110-120wpm using a janky 3 fingers on left hand and 2 fingers on right hand technique.
Ahhhhh that’s a good keyboard
All brass? What about the keycaps?
-This post was made by LinusTechTips gang
Hello Taeha, do you know where I can get the SA Olivia Kaycap set?
Wait for a group buy
How much would a custom 60 percent keyboard cost
Nice vid dude
those caps look like my akko 3068 retros
god dammit, trying to save money and you hit me with more buttery custom keyboards......
One of the few boards I really dislike the sound of. Like a woodpecker
even at 2:47:50?
shout out to the BOX JADESSSSSSSSSSSSSSSSSSSSSSSSSSS my board is box jades and i love it. building a second board, 65% w/ holy pandas!
Hey does anyone know what the typing test used in this video is called?
Monkeytype.com
Type test at 2:28:18
All brass think 6.5 doubles as home protection in the event of an intruder. lol
Taeha, I live in Fontana just a city or two away from Corona, and would love for you to build me a keyboard. Do you have a website or something?
1:20:38. The time frame hat Teaha's career ended.
Glarses would like a word with him.
Where can you buy Clear switches
What's the new site you use for typing tests?
What kind of switch opener is that?
where can you download the VIA app?
when does this man stream in aest and on what day? can anyone tell me?
Hello Guys if someone has a good mechanical keyboard either 60%, 65% or TKL LAYOUT at best one that is already finished and which I don't have to assemble myself like you are used to on the channel here would be correct if someone can recommend keyboards or keyboards brands to me gladly also as accessories good keycaps and im asking me if the Ducky one 2 mini is good ?
yo those keys are bonky
Whats the typing test site?
What typing test software does he use?
@ 2:23:05 you imply that aluminium has it's sound signature. As somebody who works with aluminium I need to add that alluminium doesn't have it's own sound. Every alluminium alloy has it's own sound. Some have no ring to them at all, and some ring like a bronze bell.
200 000 bro les goooo
Whatever happened to that MKBHD build anyway? Pretty sure they exchanged emails last year.
what is the typing website he used for the typing test?
how much duz it cost to buy one
how much is that all brass board
what desk do you have?
Where do you. Buy the switches
what kind of typing test you use???
Can you compare GMK and KAT in your next video?
For real tho, what software did he used to test the PCB?
www.majorgeeks.com/files/details/switch_hitter.html
That Aigoo lol... you turning into an ajashee already?