As a professional installer for 25+ years I am absolutely genuinely shocked at how well and how much real information you guys put out nice job nice job
Invaluable info! Thank you! I'm brand new to the whole home security system idea, and in less then one week I've gone from thinking of buying the "simply easy (and safe)" wireless battery only system, to rushing out to my local warehouse club to buy a wireless battery system I could also run on constant power, to now a more thorough investigation of a PoE system. You're 9 points were spot on! And, I have a bonus mistake you could add to your list. "Taking advice from the wrong people - like your buddy who did zero research before buying his system."
Here are some additional mistakes/observations: (I'll preface this by saying some security camera and NVR companies make getting some of the specifications VERY hard to obtain. Some won't provide these details at all) NVR=Network Video Recorder WiFi Cameras and systems: WiFi can be jammed, especially in industrial spying/sabotage or high-end neighborhoods there is a lot of incentive for thieves to invest in radio jamming equipment. It is not so expensive that some thief that is looking at a high payoff won't use it. SOME NVRs have a feature that outputs an alarm signal if the video input is interrupted by either device failure or jamming of this type. Camera REAL Resolution: In general (see focal length below), I suggest using 5MP MINIMUM cameras. However, as Nelly's guy said, make sure your NVR (network video recorder) can use the higher resolution cameras. This information is usually buried deep in the user manual or a separate data page on the vendor's website. Cheap NVRs in particular may only support 2MP cameras. Note: the higher the camera MP rating, the more storage it will consume in both non-compressed and compressed formats. A 5MP camera will consume considerably more storage space than a 2MP camera. Sunlight and Time Of Day: Orient the cameras so sunlight cannot directly impinge on the camera lens AT ALL TIMES OF DAY. Keep Daylight Savings Time in mind as well. In most locations on the planet, the position/angle of the sun in the sky changes during the year. It can change a lot...especially as you get farther from the equator, and may be another factor to keep in mind when installing a camera. A camera can be PERMANENTLY damaged if sunlight "hits" the sensor. It will of course also totally blot out your image from that camera. Artificial Lighting and Time Of Day and Motion Detection Floodlights When positioning your cameras, be sure to take into account lights that may turn on at certain times of day. Everything may seem OK when you first setup your camera, but then at night your camera may be overloaded by a streetlight or other light that turns on at night or when clouds/weather gets really dark. A similar consideration exists for car headlights. You may see no problem during the day but headlights may cause major problems at night. This would be especially true when the camera is watching a gate, driveway, or parking lot. Similarly, if your area of observation has *motion activated floodlights* they can also "swamp" the camera sensor and make any images unusable while the light is on. 1080HD/1080p Camera CLAIMS: Keep in mind that just because a camera CLAIMS "1080HD" or "1080p" output, it doesn't actually mean the camera actually provides that level of resolution. All it means is that the output has been modified to make it compatible with 1080HD/1080p displays. The image from a 2MP camera is closer to 480p actual resolution. Only the output has been modified. There is no added detail when you simply modify an image to go from 480p to 1080p. You just get a larger format but still fuzzy image. Focal Length: Understand and choose the correct camera lens FOCAL LENGTH for your needs. For example, the typical wide-angle surveillance 2.8mm focal length camera gives you a wider field of view, but if you need to observe only a small area but at a greater distance away, you may want to consider a 6mm focal length lens. Or, you may want to install both at a given location. This can be critical when your camera does not offer OPTICAL zoom. It should be noted that a narrow-angle 6mm 2MP camera can provide BETTER detail than a wide-angle 2.8mm 5MP camera at a far distance, so that can affect your decision. Remember also that 2MP camera requires less storage than a 5MP camera. This video explains it very well and provides examples under various conditions: th-cam.com/video/e2e05usL3Sg/w-d-xo.html IR floodlights, 850nm: If you're going to buy IR floodlights, the almost universal wavelength of IR light used in surveillance cameras is 850nm. The other commonly sold IR light on the internet is 930nm...however it probably will NOT work in a typical surveillance system. Be sure to match the wavelength of the external IR light to your camera's IR LEDs. Optical vs. Digital Zoom: If you are going to DEPEND on zoom capabilities, I strongly suggest buying a camera that offers OPTICAL zoom. As the Nelly's guy said, digital zoom only magnifies, it does not provide more data/detail. OPTICAL zoom however, provides more data and more detail. An alternative as I said above, is using a camera with a longer focal length than the typical 2.8mm camera. Data Compression: In general, the higher the degree of compression, the more details are lost. H.264 and H.265 compressions are NOT lossless compression. A given camera and/or NVR may or may not offer a lossless compression data mode. WiFi cameras may compress the data because it results in faster network transmission and lower network bandwidth. NVRs generally offer compression to reduce the amount of storage it takes to save X hours of camera video in a given format. If you need absolutely the best video detail then lossless compression or no compression are options to look into. I'm unsure if there are any WiFi cameras that offer uncompressed data streams so in such cases you might want to consider wired camera installations. Keep in mind however, that analog camera signals degrade for every foot of cable so may only be suitable for a fairly short-range installation, and for maximum image clarity, analog cables need to be replaced after as little as 5 years in service (depends on environmental factors). Consult your security system vendor and get these kinds of details in writing. Some vendors will verbally assure you about anything you ask to make a sale. ONVIF compatibility (WiFi only): ONVIF is a surveillance camera and system standard that helps ensure that a WiFi camera you buy is compatible with your NVR. There are both ONVIF Versions and Profiles that you may need to meet to ensure full compatibility. However, I've been unable to obtain ONVIF information from some vendors, so you may have to buy and try to determine compability. In such cases, I suggest buying from a website/vendor that will accept "returns for any reason", preferably with no return shipping or "restocking" charges. For more info on ONVIF, just search the internet.
You’ve earned a new customer, I’ve had my truck broken into 2x in past year..I currently have Nest cameras that are very close to my WiFi router and still have connectivity issues on top of not great zooming...can see an image of a person but not enough to catch them..I want the best cameras I can get but also I’m not a tech guy..I’d like to use my phone if possible but definitely want wired cameras...I’ll be calling tomorrow..
Here is the one you missed: aiming outdoor cameras at the east /west horizon where the sun sets/rises. Near time, the sun blocks out the view and changes the exact area due to the seasons. SE to NE and SW to NW winter to summer. Keep the angle low; no sky view.
Actually, higher resolution CAN be achieved via computer processing, but it requires multiple frames of an image to do so. You can't just grab a screen-shot and enhance it via this process. It takes multiple images of the same object and via software combines them and may be able to produce a composite image that strips out much of the noise while at the same time introducing pixels from all the images and mapping them into a new image that produces more detail. For one SIMPLISTIC example, one part of the eyes may be obscured or "out of focus" in one frame (but the rest of the face is decent), but the eyes are "in focus" in another frame. So the software removes the out of focus section from the first frame and replaces that section only with the in focus section from the second frame...thus producing an image with superior resolution overall. Also, the data compression used by a camera and/or system may produce less than optimal resolution of the eyes in one frame, but when it compresses the data for the next frame the eyes were compressed with more information. The results of compression can vary due to lighting, distance, motion, etc. Dealing with compression artifacts can be quite difficult. However, this kind of software is as far as I know, still all proprietary, and mostly available and used by government agencies or vendors who specialize in image enhancement. I've not seen any software package that a typical consumer would use (or would want to pay high dollars for) that would provide enhancement in this manner. Similar techniques are used in producing higher resolution images from optical telescopes. Of course, it also helps a LOT if your data are not compressed at all. However this requires a LOT more data storage and most consumers would balk at either the higher cost or the decreased amount of video stored before the "old" data are overridden. Note: I don't recommend any camera with less than 5MP of sensor resolution. Even if a camera is advertised as "1080HD" or similar, a 2MP camera is NOT actually capable of providing true 1080p information. It could be 480p (or even lower). The system may DISPLAY 1080p on the HDMI output, however the 480p image has simply been "stretched" to meet the 1080p format of the display. No "HD" information actually exists.
Also not true. Visual machine learning is a thing. Plenty of AI software can blow up an image AND fill in details where there were none. Some of these features can be found in smartphones and can be applied to the images taken - only a matter of time before security cameras build this in.
Almost every home and about 1 out of 4 businesses I walk into have the DVR box sitting in plain view. Thieves around here have quickly learned to just cut the cables from the box and take it, and therefore any evidence, with them. I usually place a cheap or old junker box in plain view with a bunch of dead cables coming to it. The real box usually goes inside a large firesafe. Cooling has not been an issue, the UPS power backup box and the DVR make just enough heat to keep moisture out of the safes. Thanks for your video, it had some great information in it.
@@jovetj how does it sound fishy? I keep my DVR in a fire safe as well. Trust me it can be done rather easily. A good high speed steel bit is all you need.
I noticed one that is missing here, when using IR cameras, you can extend their range at night with IR flood lights. Be sure to position them out of view of the cameras though. My cameras have around a 30' range with the built in LEDs, with my IR flood lights, they pick up details at close to 200'. Another thing with IR cameras, don't use CFL bulbs in the field of view, they make the cameras useless.
A purchase caution. Be sure to get the IR floodlight with the same wavelength output as used in your camera(s). Some sellers try to con people into buying their 940nm IR floodlight by highlighting it's IR LEDs are "invisible" or "less visible" to human eyes (you don't see the deep red glow of typical surveillance camera IR LEDs) compared to the typical 850nm IR LEDs...but these 940nm IR floodlights won't work with the typically 850nm IR LED cameras. Sometimes the sellers don't even specify the wavelength of their product and customers won't understand there is a difference in IR LED lighting...or they will put the info in really small letters in some obscure place and then claim you can't return it because it was YOUR error to buy the wrong light. Even worse, I've seen sellers spec their light as 850nm in one place, and 940nm in another, adding to the problem. Note: to be more stealthy, SOME systems do use 940nm LEDs for illumination, but most consumer-grade cameras use 850nm IR LEDs.
Very nice video and good tips especially for a few years ago, but so much has changed! Needs to be updated asap, now we have super low light cameras, AI, high speed and more...
Amazing Demo on mistakes I've accepted my Swann bright white glare in day time and as I just learned ir flooding nightmare. I've made poor choices in life and spending big money after being robbed not just by criminals but by Swann. Dummy camera would have done better when I can't see. Makes me wanna cry we need more companies like you willing to help covering any mistakes with the world. you know money doesn't grow on trees to pay for a tech.
We used an outdoor camera indoors, pointing outdoors through a window. The IR glare was ridiculous... We had to completely disable the IR lights. they weren't needed thanks to the area being completely lit. Black electrical tape over the IR LED lights can work in a pinch but it's frustrating if you leave any leaks.
My favorite type of advertisement -- provide some value to the viewer in return for watching. I watched the video looking for information on setting up a system I've already purchased for home. Making the video wasn't a waste though. I'll be replacing the system at my business soon and I'll certainly give Nelly a call.
Here is number 7: Installing cameras which are too high or otherwise impossible to access and maintain. Spiders just love building webs on outdoor CCTV cameras so you need to be able to get to them to clear the spider webs off, sometimes daily, with a suitable long brush or similar.
Oh yeah, that was one mistake I made too. Good one!!! I would use a 10 foot ladder and still couldn't reach the dang camera very well. Won't do that again.
Pretty good tips overall. #3 about wifi cameras has a lot of truth to it, but if you have a large enough property and multiple wifi access points, you can totally make this work. I have most of my cameras hardwired, but I'm still able to get two 3MP cameras on a single dedicated AP with no issues at all. 24/7 recording.
I am somewhat conflicted regarding exposed cameras as a deterrent, as opposed to concealed cameras to obtain video without letting the intruder know. Have you ever experienced a client's DVR being sought out and stolen/destroyed during an intrusion? Do you offer DVRs that incrementally upload to a secure remote storage server? Thanks very kindly for a informative video.
Yep. Been messing with cans since 2009. I have made so many mistakes that I now do installs on the side and I have multiple examples around my house/property for customers to compare in real life before buying. Have had a lot of signal issues caused by weather or spiders at my full time job.
They missed a very important mistake.Time and date on the recorded images has to be accurate.If it isn't correct it will be useless If required as evidence in a court of law.
If a case depends on the surveillance timestamp, then prosecutor will have to "prove" it's reliable. Since most can be set by anyone with access to the system, that can be a challenge. Usually the best you get is testimony from the owner/operator that they set the time correctly and used a reliable source (like a cellphone carrier's timestamp or US time standard broadcast from Fort Collins, Colorado) to do so, AND that they were the only one(s) to have access to that feature of the system. Juries may or may not believe the testimony. They also have to prove the timestamp data on the video and/or the video itself have not been altered. The more critical the timestamp is to the case, the more focus the defense will put on discrediting it and there are various ways that can be approached.
In a murder case I assisted with where the security camera timestamp was wrong, we were able to correlate the wrong time to the right time by matching employees leaving the building and when they carded out from the factory, and product deliveries from trucking companies to the loadout facility. The police were then able to narrow down the suspect by grabbing nearby footage from convenience stores from the exit and entrance routes. It didn't need to be exact, just within a few minutes. Also, all 16 cameras could be proven to be off by the same time amount.
Excellent video! I'm an installer working in Italy: i can tell you that one big mistake people made is leaving the outside camera cables free to be reached by anyone, not using junction boxes or using it in a wrong way. Just one question: do your company sells Dahua equipment? Do you have any office here in Europe? Thanks!
Great video of facts that should be clear but never are. I have a neighbor from hell, peeps in my windows, throws glass shards to hurt my traumatized rescue dog’s paws, etc etc etc. I had to get a system for the police to do anything. I got an 8 cam POE system from Zmodo. I wish you had made this 5 years ago, I have hours of clips showing him and all types of violence. I got a restraining order against him and he violated it LITERALLY the next morning! The cops do nothing to protect me, AND IM LEGITIMATELY HANDICAPPED TOO! I will try to find a way to investigate costs, and what little I have left to defend myself. My life is complete hell, and this man has found a way to to make it far worse than anyone could take. I’m handicapped now so, I can’t work, and live in blinding pain. I’ve lost all of my friends because I can’t do anything or go anywhere. I haven’t been able to date since my fiancé left. She didn’t want to be married to someone with a spine that breaks, so when I got to 10 vertebrae, she left. I used to start relationships with coworkers or through work, it’s hard to meet someone when you can’t leave your house comfortably. Then, who wants a cripple? Anyway, sorry. Point being, I need help with better cams than I have now. I’m sure your products are of the best quality, and financially unobtainable for me, however I would like to know if it is something I could save for or if it’s a pipe dream. Essentially I’m sure I’d need at least 2 360° cams with optical zoom. Audio is as if not more important for this. I’ve pieced together cheap wireless cams from internet sites. Where it gets out of my league for sure is, thermal imaging is another need, not a luxury. I have plenty of ambient lighting and infrared has always been great, but have recently gotten 2 new cams with color night vision (just sensitive cam setting, still needs light ie infrared). My system is breaking down and I’d ideally like to have a computer program to aid in recording faces, actions, or license plates. I’m at the end of my rope. My life nonstop pain, can’t sleep, can’t eat, anxiety from the pain that causes spasms, and this A-hole who is (literally) severely mentally ill. I have no more strength to keep going and living attached to my cams on my phone or tv afraid of him hurting more animals. You should be able to see the first clip of me catching him climbing the neighbors fence to hide glass on their property to throw in my yard later at night when dark. I’ll happily forward a copy of the restraining order at your request to verify the story isn’t BS. Perhaps you could use me and my situation for positive public relations. Maybe you could prove how great you and your company are by setting up the best possible equipment to catch him (and then take it back when he’s stopped). I don’t expect anything for free, it was just an idea. Thanks for reading this.
Great video, when I installed one of my cameras the white drain pipe would white out the image during the dark hours, I over came this by spraying the section of pipe black.
Mistake #1 is a sure thing. Whether you buy from Nelly or another surveillance camera company, make damn sure they have a good customer support department. Nelly has such department, and they've never let me down. I might think I know everything there is to know about surveillance cameras, but Nelly's techs know x100. They've been down those paths many time, and I don't want to reinvent the wheel.
I’m an installer and I’m doing a take over job and it’s a new construction building and the cable left from the previous IT group looked exactly like in the video. With cables looping through the rack and everything going straight to the switch with no patch panels. Infrastructure and Designing the layout of cameras placements is key to a great installation to happen.
Good video.. mistake number 7... reading and believing wireless specs.. my system said 100 feet in range. It was closer to 30 BEFORE i added better attena(s) and one booster / amplifier. A ring doorbell is helpful for face recognition but picks up my security ir lighting at night..
You are damn right, these are the most mistakes that I've pretty much make during as beginner, up till now. thanks for realizing its a big mistakes and avoiding this can save more money on it
I will be installing cameras, you've done a great job of showing me what to expect more so than the last three "TH-cam experts". You're up front, you sell this stuff you want your customer to be knowledgeable . Question how close does a WiFi camera have to be to capture a license plate?
Much appreciated Tom! It depends on the lens capability of the camera. The Wired LPR camera that we carried from our H-series line could catch plates up to 100ft away from where it is mounted. It was designed specifically for License Plate Recognition however. There are many variables that can come into play that can make most standard cameras not useable with License Plate Capture. Such as weather conditions, distance, speed of vehicle, frame rate as a few examples. Feel free to reach out to us if you have any further questions! - customerservice@nellyssecurity.com / 855-340-9999
Excellent video. Very educational. I do have two questions. You mention not to skimp on the quality of the cable. I am wiring my house for IP cameras. My walls are open. My questions: (1.) CAT6 with a shield or non-shielded? All my runs are well under 75 feet. (2.) Do I need to maintain a certain distance from my BX electric?. Thank you in advance.
Hey there! Great questions. 1. Non-shielded is fine unless the cat cable will be near high voltage cabling also. Then the shielded will be necessary. 2. Just do not run parallel with the bx, it needs to be at least a foot away. it will cause induced voltage into the cat wire and cause static.
Actually the #1 mistake is the one that security companies make on every installation. Putting all the cameras on the eaves - so an intruder can walk around with their hoody up and you've recorded nothing of use for the Police. Unless you've got at least one video at around eyeball level, you are not going to get your stuff back.
good point. I wanted to hard wire cams on the 4 corners of my home, but its a one story and the fascia sits low enough that someone with a piece of rebar (or something like) could smash it. So im thinking a camera on each side of house up high near roof and window cams in front and back windows...but dont know about night vision? maybe a low profile cam on door? Im obviously trying to figure possibilities while typing. is there a suggestion out there?
@@CM-ld3dq A doorbell camera is useful. If you can, mount a camera on the ground at the edge of the property looking back, if the area is well lit then you’ll be looking up into their hoodie. I hide mine next to a rock near a path, you can’t see it from the road. If you have automatic interior lighting, put one on the landing, if they break in they won’t be worried about being seen and you might get a decent picture. Make sure to secure/conceal the recorder box, ie don’t leave the cabling visible so they can follow it back. Most dome cameras are really hard to break without making a lot of noise, having some on low eaves is fine, you need something visible to act as a deterrent anyway, get some cctv cages if you are worried. Generally automatic lighting is the best deterrent, install that first
I've had a look at it and yes, it would be very useful,, but for the normal customer, my guess is that it's to advanced to set up, if you want to be able to do it on the fly, also, you would need much more CPU or GPU power than the average user would be comfortable using on a surveillance system. It would also be hard to get your customers to setup something like this themselves, just because they want a cheaper camera. They would probably just end up buying a better camera rather than paying an IT professional to setup this software for them and link it to another system. I on the other hand have already started installing it on one of my local servers in order to test it out on a system I'm setting up. Thanks for the tip :)
Great and informative. I learned so much. Thank you for a great experience with tons of easy to understand information to help you with your security monitoring system.
Much appreciated. And thats a very good question! The best all around camera that id recommend would be this 4MP turret -> www.nellyssecurity.com/unv-4mp-turret-ip-security-camera-with-a-2-8mm-fixed-lens-built-in-mic-ipc3614sr3-adpf28-f.html Id advise reaching out to our sales team and they can provide further assistance! - customerservice@nellyssecurity.com / 855-340-9999
9:30 ... also to add if pointed too high, when there's no clouds and the sun is shining bright it blocks out some viewing angles. Had this issue with two of my cameras I couldn't make-out images that were further away when the sun was bright on the lower horizon. Had to adjust to compensate for the sun during late hours of the afternoon.
This was a great video. You really hit all of the points on explaining what to do, while also explaining the benefits of doing business with you. The implications of 8 mistakes were evidence enough that you should trust a professional and do it right the first time. If you don't have to buy a new $200 camera once, you probably already saved enough to do business with someone that has support. Support is super important; unless you like doing 60 hours of research on your own like me. I still had to watch this video
Had the ceiling panel been turned 180 degrees as you suggested, the camera would also be turned 180 degrees and pointing in the opposite direction. Turn yourself 180 degrees and look at which direction you are facing. JAE. Your thinking is 180 degrees out of phase.
Andrew_koala So you’re saying that the camera itself doesn’t twist so you can adjust the direction? Obviously if you switch the panel around, you would also have to adjust the camera direction. But again, there should be no need to remove and then add.
Awsome video! I agree too about wires! It’s for sure the best way to go if you can do it. And POE cameras are the best because it’s data and power all from 1 cable!
HI just unbelievable the way you explain humour and smile and also you re so right with your explanations thanks a lot from france it is a pleasure to watch ur video
Hi Tyler! I'm a tech nerd from the analog days and I have to tell you I learned a bunch from your video. Thanks for taking the time to put this together. I especially appreciated tip number one! My summer home was burglarized last year so I'm trying to put something together. Best Wishes, Take Care, Tom K
Great video and you are a great face for the company. By the video footage it appears as though you are in Oklahoma. We are located far from Oklahoma but we may be expanding our security system in the future and will definitely reach out to you guys. Thanks for the tips. 👍🏼
I would add a few other rules. 1. Always make sure that all your cameras are filmed by at least one other camera. If there's only one camera in a room, make sure the entrance is covered by another camera. That way it's not possible for someone to steal a camera, without you getting some good footage of the thief. It will increase the amount of cameras you'll need, but also increase the overall security. 2. Make a draft before you start, so that you get a good feeling of the place you're trying to secure. 3. Measure distances from all cameras to the closest router, switch or DVR if you use that. Learn how to put together RJ45 cables and you will save some money there by buying in bulk. 4. Use good cables and connectors. it will save you a lot of headaches in the future. 5. Try to conceal everything as much as possible. 6. Never ever ever use WIFI cameras, unless you plan to put the feed online for everyone to see anyway. Most known WIFI encryptions can be cracked within fifteen to thirty minutes, so the hackers will have a field day... That's all i got for now. Stay safe everyone :)
@@NellysSecurity I find that, the more preparation you do before you start, the better and faster work you do. You video is great and I learned a few things that I haven't thought of. It's a great thing you guys are doing, and I'm glad to be able to contribute with something :)
#9 is slightly off … you can get details that aren’t there in the original picture based on image processing algorithms but I am not sure you can use it as proof in a legal case. Processing algorithms have come a long way to be able to guess #8 - the issue I believe is that the camera is setting exposure based on the brightest light it sees. If the camera has the ability to set the focus point and adjust exposure accordingly it should be ok. But all points you made are valid … better to fix at installation than work around it
I installed 4 cameras in the summer. Worked nice. Then I noticed 1 of the cameras had a large spot on the picture at night. Discovered as winter came along, the sun set farther to the SW. Sun was hitting the camera and burned up the camera . Had to buy a new camera and made sure it did not see the sun in the evening.
Number 2, is a bit hit/miss as a home user I have had the same system for over a year now and I have only used 2 cams out of 4. Either way love the video, I sent this to a friend of mine who was unsure on first time CCTV :)
Very good video and informative for those who don't understand how security systems should be optimized but......OMG.... that cable management though..... smh
9:09 maybe put there to make a point but .... like putting the camera out in the open exposed to all weather, put it under the woodwork, give it some weather protection, reduces sun flare if pointed where direct sunshine can cause issues and still get full coverage of the area you are looking at
Stumbled onto this video and glad I did. I am an experienced independent installer and absolutely agree with your assessment, however, since I've never bought equipment at Nelly's (never heard of...) I can't chime in on #1. Hope you don't mind if I link this video onto my site, I think this is useful info. that is better to know sooner than later. Thanks
Your first advice I guess is the most valuable. It is very important to calculate pixel density from the start. I calculate ppf/ppm and DORI zones (Detection, Observation, Recognition, Identification) using graphical lens calculator from jvsg. It takes seconds but it saves time and helps to forget about miscalculated lenses.
I think your number one should be POSITION. I see too many hats and hoodies and no faces. One eye level camera will go a long way when identifying strangers in hats or workers in matching uniforms. I sometime place knee high cameras when i have extra.
Agreed, and looking at placing cameras away from buildings looking in. Too many times I’ve seen huge dead zones because they put them on the building expecting some massive wide angle view. Sure, nothing wrong with having them but if you can pole mount 2 cameras on opposite sides of a building you’ll have a decent 360 to see exactly where they’ve gone.
Correct. I second that. Due to numerous terror related attacks(bombs left in movie theaters and restrooms) ,in our city, establishments were required to install both high and low level(eye level) CCTV cameras. The eye level cameras would have a better view of the facial features of the terrorists. The eye level cameras can only be installed indoors. Installing them outdoors will make them prone to tampering or theft.
There might not be much room for image enhancement but you can try to zoom in. If it is a larger image than your tv or monitor can usually display it would be shown in a reduced resolution unless you zoom in or extract a frame and zoom in. VLC can let you extract frames and they are in the native resolution of the video despite what your monitor usually displays. There are other programs which are also free and allow frame extraction or export. That is helpful if you are hoping to read a plate or see a face.
It was a hidden camera and he didnt know it was there. In reality it was a secret subliminal message for you to buy our hidden camera: www.nellyssecurity.com/nsc-642-phc-2mp-wdr-pinhole-covert-ip-security-camera-3-7mm.html
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Brand new to IP security? Watch our guide to setting up an IP system here: th-cam.com/video/Tzjoorb2BAY/w-d-xo.html
As a professional installer for 25+ years I am absolutely genuinely shocked at how well and how much real information you guys put out nice job nice job
Here here....
6
I like a company that openly admits it's knowledge is based on the mistakes it's learnt from.
Thanks for watching and thanks for commenting!
I view it as EXPERIENCE
I like how they teach you their mistakes so you are less likely to spend a lot of money making them by getting the wrong camera.
The mistake in this video is the background music. Very distracting. Learn from this. But otherwise very informative.
I've been working in security business since 2009 and i think this is the best video i've ever seen! respect!
Thank you very much!
Invaluable info! Thank you! I'm brand new to the whole home security system idea, and in less then one week I've gone from thinking of buying the "simply easy (and safe)" wireless battery only system, to rushing out to my local warehouse club to buy a wireless battery system I could also run on constant power, to now a more thorough investigation of a PoE system. You're 9 points were spot on! And, I have a bonus mistake you could add to your list. "Taking advice from the wrong people - like your buddy who did zero research before buying his system."
But also consider that his needs might have been served well enough with wireless but your needs are indeed different.
Here are some additional mistakes/observations:
(I'll preface this by saying some security camera and NVR companies make getting some of the specifications VERY hard to obtain. Some won't provide these details at all)
NVR=Network Video Recorder
WiFi Cameras and systems:
WiFi can be jammed, especially in industrial spying/sabotage or high-end neighborhoods there is a lot of incentive for thieves to invest in radio jamming equipment. It is not so expensive that some thief that is looking at a high payoff won't use it.
SOME NVRs have a feature that outputs an alarm signal if the video input is interrupted by either device failure or jamming of this type.
Camera REAL Resolution:
In general (see focal length below), I suggest using 5MP MINIMUM cameras. However, as Nelly's guy said, make sure your NVR (network video recorder) can use the higher resolution cameras. This information is usually buried deep in the user manual or a separate data page on the vendor's website. Cheap NVRs in particular may only support 2MP cameras.
Note: the higher the camera MP rating, the more storage it will consume in both non-compressed and compressed formats. A 5MP camera will consume considerably more storage space than a 2MP camera.
Sunlight and Time Of Day:
Orient the cameras so sunlight cannot directly impinge on the camera lens AT ALL TIMES OF DAY. Keep Daylight Savings Time in mind as well. In most locations on the planet, the position/angle of the sun in the sky changes during the year. It can change a lot...especially as you get farther from the equator, and may be another factor to keep in mind when installing a camera.
A camera can be PERMANENTLY damaged if sunlight "hits" the sensor. It will of course also totally blot out your image from that camera.
Artificial Lighting and Time Of Day and Motion Detection Floodlights
When positioning your cameras, be sure to take into account lights that may turn on at certain times of day. Everything may seem OK when you first setup your camera, but then at night your camera may be overloaded by a streetlight or other light that turns on at night or when clouds/weather gets really dark.
A similar consideration exists for car headlights. You may see no problem during the day but headlights may cause major problems at night. This would be especially true when the camera is watching a gate, driveway, or parking lot.
Similarly, if your area of observation has *motion activated floodlights* they can also "swamp" the camera sensor and make any images unusable while the light is on.
1080HD/1080p Camera CLAIMS:
Keep in mind that just because a camera CLAIMS "1080HD" or "1080p" output, it doesn't actually mean the camera actually provides that level of resolution. All it means is that the output has been modified to make it compatible with 1080HD/1080p displays. The image from a 2MP camera is closer to 480p actual resolution. Only the output has been modified. There is no added detail when you simply modify an image to go from 480p to 1080p. You just get a larger format but still fuzzy image.
Focal Length:
Understand and choose the correct camera lens FOCAL LENGTH for your needs. For example, the typical wide-angle surveillance 2.8mm focal length camera gives you a wider field of view, but if you need to observe only a small area but at a greater distance away, you may want to consider a 6mm focal length lens. Or, you may want to install both at a given location. This can be critical when your camera does not offer OPTICAL zoom. It should be noted that a narrow-angle 6mm 2MP camera can provide BETTER detail than a wide-angle 2.8mm 5MP camera at a far distance, so that can affect your decision. Remember also that 2MP camera requires less storage than a 5MP camera.
This video explains it very well and provides examples under various conditions:
th-cam.com/video/e2e05usL3Sg/w-d-xo.html
IR floodlights, 850nm:
If you're going to buy IR floodlights, the almost universal wavelength of IR light used in surveillance cameras is 850nm. The other commonly sold IR light on the internet is 930nm...however it probably will NOT work in a typical surveillance system. Be sure to match the wavelength of the external IR light to your camera's IR LEDs.
Optical vs. Digital Zoom:
If you are going to DEPEND on zoom capabilities, I strongly suggest buying a camera that offers OPTICAL zoom. As the Nelly's guy said, digital zoom only magnifies, it does not provide more data/detail. OPTICAL zoom however, provides more data and more detail. An alternative as I said above, is using a camera with a longer focal length than the typical 2.8mm camera.
Data Compression:
In general, the higher the degree of compression, the more details are lost. H.264 and H.265 compressions are NOT lossless compression. A given camera and/or NVR may or may not offer a lossless compression data mode. WiFi cameras may compress the data because it results in faster network transmission and lower network bandwidth. NVRs generally offer compression to reduce the amount of storage it takes to save X hours of camera video in a given format. If you need absolutely the best video detail then lossless compression or no compression are options to look into. I'm unsure if there are any WiFi cameras that offer uncompressed data streams so in such cases you might want to consider wired camera installations. Keep in mind however, that analog camera signals degrade for every foot of cable so may only be suitable for a fairly short-range installation, and for maximum image clarity, analog cables need to be replaced after as little as 5 years in service (depends on environmental factors). Consult your security system vendor and get these kinds of details in writing. Some vendors will verbally assure you about anything you ask to make a sale.
ONVIF compatibility (WiFi only):
ONVIF is a surveillance camera and system standard that helps ensure that a WiFi camera you buy is compatible with your NVR. There are both ONVIF Versions and Profiles that you may need to meet to ensure full compatibility. However, I've been unable to obtain ONVIF information from some vendors, so you may have to buy and try to determine compability. In such cases, I suggest buying from a website/vendor that will accept "returns for any reason", preferably with no return shipping or "restocking" charges. For more info on ONVIF, just search the internet.
What fascinates me is how much of the advice from coworkers are on your list of things to avoid. Thanks for posting this!
I’m actually shocked you didn’t list “failing to change the manufacturers default password(s)”. Especially since you covered wireless setups.
You’ve earned a new customer, I’ve had my truck broken into 2x in past year..I currently have Nest cameras that are very close to my WiFi router and still have connectivity issues on top of not great zooming...can see an image of a person but not enough to catch them..I want the best cameras I can get but also I’m not a tech guy..I’d like to use my phone if possible but definitely want wired cameras...I’ll be calling tomorrow..
Here is the one you missed: aiming outdoor cameras at the east /west horizon where the sun sets/rises. Near time, the sun blocks out the view and changes the exact area due to the seasons. SE to NE and SW to NW winter to summer. Keep the angle low; no sky view.
Had to learn that the hard way with my trail cams. Great advice!
Actually, higher resolution CAN be achieved via computer processing, but it requires multiple frames of an image to do so. You can't just grab a screen-shot and enhance it via this process. It takes multiple images of the same object and via software combines them and may be able to produce a composite image that strips out much of the noise while at the same time introducing pixels from all the images and mapping them into a new image that produces more detail.
For one SIMPLISTIC example, one part of the eyes may be obscured or "out of focus" in one frame (but the rest of the face is decent), but the eyes are "in focus" in another frame. So the software removes the out of focus section from the first frame and replaces that section only with the in focus section from the second frame...thus producing an image with superior resolution overall. Also, the data compression used by a camera and/or system may produce less than optimal resolution of the eyes in one frame, but when it compresses the data for the next frame the eyes were compressed with more information. The results of compression can vary due to lighting, distance, motion, etc. Dealing with compression artifacts can be quite difficult.
However, this kind of software is as far as I know, still all proprietary, and mostly available and used by government agencies or vendors who specialize in image enhancement. I've not seen any software package that a typical consumer would use (or would want to pay high dollars for) that would provide enhancement in this manner.
Similar techniques are used in producing higher resolution images from optical telescopes.
Of course, it also helps a LOT if your data are not compressed at all. However this requires a LOT more data storage and most consumers would balk at either the higher cost or the decreased amount of video stored before the "old" data are overridden.
Note: I don't recommend any camera with less than 5MP of sensor resolution. Even if a camera is advertised as "1080HD" or similar, a 2MP camera is NOT actually capable of providing true 1080p information. It could be 480p (or even lower). The system may DISPLAY 1080p on the HDMI output, however the 480p image has simply been "stretched" to meet the 1080p format of the display. No "HD" information actually exists.
Also not true. Visual machine learning is a thing. Plenty of AI software can blow up an image AND fill in details where there were none.
Some of these features can be found in smartphones and can be applied to the images taken - only a matter of time before security cameras build this in.
Almost every home and about 1 out of 4 businesses I walk into have the DVR box sitting in plain view. Thieves around here have quickly learned to just cut the cables from the box and take it, and therefore any evidence, with them. I usually place a cheap or old junker box in plain view with a bunch of dead cables coming to it. The real box usually goes inside a large firesafe. Cooling has not been an issue, the UPS power backup box and the DVR make just enough heat to keep moisture out of the safes. Thanks for your video, it had some great information in it.
How do you get cables in and out of a fire safe?
@@jovetj concrete drill bit
Sounds fishy.
@@jovetj how does it sound fishy? I keep my DVR in a fire safe as well. Trust me it can be done rather easily. A good high speed steel bit is all you need.
It was a joke. Fishing cables? Get it? Guess not.
I noticed one that is missing here, when using IR cameras, you can extend their range at night with IR flood lights. Be sure to position them out of view of the cameras though. My cameras have around a 30' range with the built in LEDs, with my IR flood lights, they pick up details at close to 200'. Another thing with IR cameras, don't use CFL bulbs in the field of view, they make the cameras useless.
Thanks. Another great reason for reading the comment section.
I want to film at night where there is good street light cover. Can you tell me, would IR work under those conditions?
A purchase caution. Be sure to get the IR floodlight with the same wavelength output as used in your camera(s). Some sellers try to con people into buying their 940nm IR floodlight by highlighting it's IR LEDs are "invisible" or "less visible" to human eyes (you don't see the deep red glow of typical surveillance camera IR LEDs) compared to the typical 850nm IR LEDs...but these 940nm IR floodlights won't work with the typically 850nm IR LED cameras. Sometimes the sellers don't even specify the wavelength of their product and customers won't understand there is a difference in IR LED lighting...or they will put the info in really small letters in some obscure place and then claim you can't return it because it was YOUR error to buy the wrong light. Even worse, I've seen sellers spec their light as 850nm in one place, and 940nm in another, adding to the problem.
Note: to be more stealthy, SOME systems do use 940nm LEDs for illumination, but most consumer-grade cameras use 850nm IR LEDs.
@@exgenica excellent advice! Thanks for adding that.
Very nice video and good tips especially for a few years ago, but so much has changed! Needs to be updated asap, now we have super low light cameras, AI, high speed and more...
Outstanding honesty! I have been in the security industry for over 40 years, and Wow, have cameras come a Long way.
Amazing Demo on mistakes I've accepted my Swann bright white glare in day time and as I just learned ir flooding nightmare. I've made poor choices in life and spending big money after being robbed not just by criminals but by Swann. Dummy camera would have done better when I can't see.
Makes me wanna cry we need more companies like you willing to help covering any mistakes with the world. you know money doesn't grow on trees to pay for a tech.
Did I just watch a 16 minutes ad that I loved? 😅😂
Great work, amazing video 👌
We used an outdoor camera indoors, pointing outdoors through a window. The IR glare was ridiculous... We had to completely disable the IR lights. they weren't needed thanks to the area being completely lit. Black electrical tape over the IR LED lights can work in a pinch but it's frustrating if you leave any leaks.
My favorite type of advertisement -- provide some value to the viewer in return for watching. I watched the video looking for information on setting up a system I've already purchased for home. Making the video wasn't a waste though. I'll be replacing the system at my business soon and I'll certainly give Nelly a call.
thanks for watching
Here is number 7: Installing cameras which are too high or otherwise impossible to access and maintain. Spiders just love building webs on outdoor CCTV cameras so you need to be able to get to them to clear the spider webs off, sometimes daily, with a suitable long brush or similar.
Oh yeah, that was one mistake I made too. Good one!!! I would use a 10 foot ladder and still couldn't reach the dang camera very well. Won't do that again.
I was thinking of installing 2 cameras, one at the front and one at the back. This video is really useful!
Gracias. Merci. Danke.
Pretty good tips overall. #3 about wifi cameras has a lot of truth to it, but if you have a large enough property and multiple wifi access points, you can totally make this work. I have most of my cameras hardwired, but I'm still able to get two 3MP cameras on a single dedicated AP with no issues at all. 24/7 recording.
I am somewhat conflicted regarding exposed cameras as a deterrent, as opposed to concealed cameras to obtain video without letting the intruder know. Have you ever experienced a client's DVR being sought out and stolen/destroyed during an intrusion? Do you offer DVRs that incrementally upload to a secure remote storage server? Thanks very kindly for a informative video.
Very nice presentation. Two items I wished you had covered in general terms. 1) Range of wireless cameras 2) Sirens or Alarms.
I’m watching this in December of 2021. Amazing to see how quickly technology evolves in just 2 years.
I love it when you get information and advice and you know you can trust it and the people giving it. Thanks! :D
Yep. Been messing with cans since 2009. I have made so many mistakes that I now do installs on the side and I have multiple examples around my house/property for customers to compare in real life before buying.
Have had a lot of signal issues caused by weather or spiders at my full time job.
They missed a very important mistake.Time and date on the recorded images has to be accurate.If it isn't correct it will be useless If required as evidence in a court of law.
Aston Martin number 7...
@@wwav9921I think it was number 7/11
I know of couple of murderers that would beg to differ.
If a case depends on the surveillance timestamp, then prosecutor will have to "prove" it's reliable. Since most can be set by anyone with access to the system, that can be a challenge. Usually the best you get is testimony from the owner/operator that they set the time correctly and used a reliable source (like a cellphone carrier's timestamp or US time standard broadcast from Fort Collins, Colorado) to do so, AND that they were the only one(s) to have access to that feature of the system. Juries may or may not believe the testimony. They also have to prove the timestamp data on the video and/or the video itself have not been altered. The more critical the timestamp is to the case, the more focus the defense will put on discrediting it and there are various ways that can be approached.
In a murder case I assisted with where the security camera timestamp was wrong, we were able to correlate the wrong time to the right time by matching employees leaving the building and when they carded out from the factory, and product deliveries from trucking companies to the loadout facility. The police were then able to narrow down the suspect by grabbing nearby footage from convenience stores from the exit and entrance routes. It didn't need to be exact, just within a few minutes. Also, all 16 cameras could be proven to be off by the same time amount.
Excellent video! I'm an installer working in Italy: i can tell you that one big mistake people made is leaving the outside camera cables free to be reached by anyone, not using junction boxes or using it in a wrong way.
Just one question: do your company sells Dahua equipment? Do you have any office here in Europe? Thanks!
Thanks for the info!
Currently we do not carry Dahua equipment or have an office in the EU, but we ship worldwide!
3:45 "No Image software in the world can magically produce new pixels.."
nvidia's DLSS:
"Am I a joke to you ?"
THANKS 4 the INFO😁👍
Great video of facts that should be clear but never are.
I have a neighbor from hell, peeps in my windows, throws glass shards to hurt my traumatized rescue dog’s paws, etc etc etc.
I had to get a system for the police to do anything. I got an 8 cam POE system from Zmodo. I wish you had made this 5 years ago, I have hours of clips showing him and all types of violence.
I got a restraining order against him and he violated it LITERALLY the next morning! The cops do nothing to protect me, AND IM LEGITIMATELY HANDICAPPED TOO!
I will try to find a way to investigate costs, and what little I have left to defend myself. My life is complete hell, and this man has found a way to to make it far worse than anyone could take. I’m handicapped now so, I can’t work, and live in blinding pain. I’ve lost all of my friends because I can’t do anything or go anywhere. I haven’t been able to date since my fiancé left. She didn’t want to be married to someone with a spine that breaks, so when I got to 10 vertebrae, she left. I used to start relationships with coworkers or through work, it’s hard to meet someone when you can’t leave your house comfortably. Then, who wants a cripple?
Anyway, sorry.
Point being, I need help with better cams than I have now. I’m sure your products are of the best quality, and financially unobtainable for me, however I would like to know if it is something I could save for or if it’s a pipe dream.
Essentially I’m sure I’d need at least 2 360° cams with optical zoom. Audio is as if not more important for this. I’ve pieced together cheap wireless cams from internet sites. Where it gets out of my league for sure is, thermal imaging is another need, not a luxury. I have plenty of ambient lighting and infrared has always been great, but have recently gotten 2 new cams with color night vision (just sensitive cam setting, still needs light ie infrared).
My system is breaking down and I’d ideally like to have a computer program to aid in recording faces, actions, or license plates. I’m at the end of my rope. My life nonstop pain, can’t sleep, can’t eat, anxiety from the pain that causes spasms, and this A-hole who is (literally) severely mentally ill. I have no more strength to keep going and living attached to my cams on my phone or tv afraid of him hurting more animals.
You should be able to see the first clip of me catching him climbing the neighbors fence to hide glass on their property to throw in my yard later at night when dark.
I’ll happily forward a copy of the restraining order at your request to verify the story isn’t BS.
Perhaps you could use me and my situation for positive public relations. Maybe you could prove how great you and your company are by setting up the best possible equipment to catch him (and then take it back when he’s stopped). I don’t expect anything for free, it was just an idea.
Thanks for reading this.
Great video, when I installed one of my cameras the white drain pipe would white out the image during the dark hours, I over came this by spraying the section of pipe black.
Mistake #1 is a sure thing. Whether you buy from Nelly or another surveillance camera company, make damn sure they have a good customer support department. Nelly has such department, and they've never let me down. I might think I know everything there is to know about surveillance cameras, but Nelly's techs know x100. They've been down those paths many time, and I don't want to reinvent the wheel.
Thanks for the kind words!
Nice video - I didn't learn anything I didn't know already, but it was such a pleasure to hear a presenter that enunciates so well. Bravo!
thanks for watching
Good video, but omg let me fix all those cables for you. I was having mini strokes every time you showed footage of your cabling.
You can probably forgive those as thats test bed installation
@@zolartan4442That's what I figured. To sloppy to have been permanent.
Rob Justice Were you in car sales in the early 2000’s in Connecticut?
I’m an installer and I’m doing a take over job and it’s a new construction building and the cable left from the previous IT group looked exactly like in the video. With cables looping through the rack and everything going straight to the switch with no patch panels. Infrastructure and Designing the layout of cameras placements is key to a great installation to happen.
@@ristube3319 Nope. Never been to Connecticut.
This video is nothing but a commercial for Nelly's Security!
Damn I was gonna set up a camera and just go off little reflections off mirrors I strategically place.
Are these little mirrors attached to your shoes?
Good video.. mistake number 7... reading and believing wireless specs.. my system said 100 feet in range. It was closer to 30 BEFORE i added better attena(s) and one booster / amplifier. A ring doorbell is helpful for face recognition but picks up my security ir lighting at night..
I feel like this dude is invading my personal space. Step back a foot or so from the camera.
Its so funny
Richiec77 haha
And if you're investing in a second camera for your infomercial, HAVE YOUR PRESENTER LOOK AT IT.
At least his audio is really good
Well, it's their channel so maybe it's you, willingly, in their space?
You are damn right, these are the most mistakes that I've pretty much make during as beginner, up till now. thanks for realizing its a big mistakes and avoiding this can save more money on it
6:53 talking about being able to see everything happening but miss the ghost mouse run across the floor.
Saw a couple
I will be installing cameras, you've done a great job of showing me what to expect more so than the last three "TH-cam experts". You're up front, you sell this stuff you want your customer to be knowledgeable . Question how close does a WiFi camera have to be to capture a license plate?
Much appreciated Tom!
It depends on the lens capability of the camera. The Wired LPR camera that we carried from our H-series line could catch plates up to 100ft away from where it is mounted. It was designed specifically for License Plate Recognition however.
There are many variables that can come into play that can make most standard cameras not useable with License Plate Capture. Such as weather conditions, distance, speed of vehicle, frame rate as a few examples.
Feel free to reach out to us if you have any further questions! - customerservice@nellyssecurity.com / 855-340-9999
I wasn't into this but I really enjoyed it. Thank you.
Excellent video. Very educational. I do have two questions.
You mention not to skimp on the quality of the cable. I am wiring my house for IP cameras.
My walls are open. My questions: (1.) CAT6 with a shield or non-shielded? All my runs are well under 75 feet. (2.) Do I need to maintain a certain distance from my BX electric?. Thank you in advance.
Hey there! Great questions.
1. Non-shielded is fine unless the cat cable will be near high voltage cabling also. Then the shielded will be necessary.
2. Just do not run parallel with the bx, it needs to be at least a foot away. it will cause induced voltage into the cat wire and cause static.
You made really great video about survelliance system problems. Thank you for all the things that you put in this video to show us those mistakes!
Thanks for watching!
Are you referring to his recommendations or all of the mistakes we saw that we now know not to make because of him??
Nice ad. Hadn't considered IR reflection off the white wall though. Good point.
Tip 5: Takes 3 minutes to talk about when he could've just said, "Install the camera in a position so it views what you want to see."
Amazing video man, thank you
Actually the #1 mistake is the one that security companies make on every installation. Putting all the cameras on the eaves - so an intruder can walk around with their hoody up and you've recorded nothing of use for the Police. Unless you've got at least one video at around eyeball level, you are not going to get your stuff back.
good point. I wanted to hard wire cams on the 4 corners of my home, but its a one story and the fascia sits low enough that someone with a piece of rebar (or something like) could smash it. So im thinking a camera on each side of house up high near roof and window cams in front and back windows...but dont know about night vision? maybe a low profile cam on door? Im obviously trying to figure possibilities while typing. is there a suggestion out there?
@@CM-ld3dq A doorbell camera is useful. If you can, mount a camera on the ground at the edge of the property looking back, if the area is well lit then you’ll be looking up into their hoodie. I hide mine next to a rock near a path, you can’t see it from the road.
If you have automatic interior lighting, put one on the landing, if they break in they won’t be worried about being seen and you might get a decent picture.
Make sure to secure/conceal the recorder box, ie don’t leave the cabling visible so they can follow it back.
Most dome cameras are really hard to break without making a lot of noise, having some on low eaves is fine, you need something visible to act as a deterrent anyway, get some cctv cages if you are worried.
Generally automatic lighting is the best deterrent, install that first
Yeah I have some IR flooding issues. Learned the hardest
Yup, had weatherproofing issues with connections too.
Video "No image software in the world can magically produce new pixels."
Waifu2x: Y hello there
True, but is it able to do it on the fly? In that case, it could be interesting to try.
I've had a look at it and yes, it would be very useful,, but for the normal customer, my guess is that it's to advanced to set up, if you want to be able to do it on the fly, also, you would need much more CPU or GPU power than the average user would be comfortable using on a surveillance system. It would also be hard to get your customers to setup something like this themselves, just because they want a cheaper camera. They would probably just end up buying a better camera rather than paying an IT professional to setup this software for them and link it to another system. I on the other hand have already started installing it on one of my local servers in order to test it out on a system I'm setting up. Thanks for the tip :)
TienOuttaTien m
@@Lars_Paulsen How did it go man? Curious about the specs you ended up going with
Great and informative. I learned so much. Thank you for a great experience with tons of easy to understand information to help you with your security monitoring system.
Nr. 7: always change passwords and use a separate network for iot :)
Good point
Nelly great job , i have a question , what type of outdoor camera should i use at my home with a street light just out front?
Much appreciated. And thats a very good question! The best all around camera that id recommend would be this 4MP turret -> www.nellyssecurity.com/unv-4mp-turret-ip-security-camera-with-a-2-8mm-fixed-lens-built-in-mic-ipc3614sr3-adpf28-f.html
Id advise reaching out to our sales team and they can provide further assistance! - customerservice@nellyssecurity.com / 855-340-9999
9:30 ... also to add if pointed too high, when there's no clouds and the sun is shining bright it blocks out some viewing angles. Had this issue with two of my cameras I couldn't make-out images that were further away when the sun was bright on the lower horizon. Had to adjust to compensate for the sun during late hours of the afternoon.
This was a great video. You really hit all of the points on explaining what to do, while also explaining the benefits of doing business with you. The implications of 8 mistakes were evidence enough that you should trust a professional and do it right the first time. If you don't have to buy a new $200 camera once, you probably already saved enough to do business with someone that has support. Support is super important; unless you like doing 60 hours of research on your own like me. I still had to watch this video
Support is very important for sure!
Love the clip of Spyderman!
I knew it was going to be a great video when youre not scared to admit that youve made a lot of mistakes.
Was not disappointed!
Here’s a tip for you. @ 6:32 - Why not just turn the ceiling panel 180 degrees? No need to unscrew and re-screw...or put more holes in the panel.
A little late now. You could have told us this when we were installing it!!!
Nelly's Security Ha!
Had the ceiling panel been turned 180 degrees as you suggested, the camera would also be turned 180 degrees and pointing in the opposite direction.
Turn yourself 180 degrees and look at which direction you are facing. JAE.
Your thinking is 180 degrees out of phase.
Andrew_koala So you’re saying that the camera itself doesn’t twist so you can adjust the direction? Obviously if you switch the panel around, you would also have to adjust the camera direction. But again, there should be no need to remove and then add.
JAE Just turn it 360* ! 😂
I click the thumbs-up on mistake #7... I like this video!
enjoyed that, good amount of knowledge and humour and yeah, i've pretty much made all those mistakes
Rofl
Awsome video! I agree too about wires! It’s for sure the best way to go if you can do it. And POE cameras are the best because it’s data and power all from 1 cable!
Not if WiFi fails. Lol 😆
Appreciate the candor throughout the video. I would expect no less than frank straight-shooting from a proper security company.
Thanks for watching!
HI just unbelievable the way you explain humour and smile and also you re so right with your explanations thanks a lot from france it is a pleasure to watch ur video
Thank you!
Excellent advice I learned a lot! Thanks for sharing,
Glad it was helpful!
Lol
I agree. Your top 10 mistakes video is really great! Congratulations!
I watched the entire video and it was fun and informative especially when I found out about my wireless blink outdoor cameras
Hi Tyler! I'm a tech nerd from the analog days and I have to tell you I learned a bunch from your video. Thanks for taking the time to put this together. I especially appreciated tip number one! My summer home was burglarized last year so I'm trying to put something together. Best Wishes, Take Care, Tom K
Hey Thomas!
Im sorry to hear that, let me know if you guys are needing any assistance.
Please reach out to us at customerservice@nellyssecurity.com
Great video and you are a great face for the company. By the video footage it appears as though you are in Oklahoma. We are located far from Oklahoma but we may be expanding our security system in the future and will definitely reach out to you guys. Thanks for the tips. 👍🏼
You betcha!
Thank you very much for this video. I've been researching CCTV for awhile and thought wireless was ok. Guess hardwired is best.
👍Great presentation, cheers from Australia.
Thank you! 👍
Excellent, production value!
Very enjoyable, very informative! I would directly order from you if I would be living in US!
I would add a few other rules.
1. Always make sure that all your cameras are filmed by at least one other camera. If there's only one camera in a room, make sure the entrance is covered by another camera. That way it's not possible for someone to steal a camera, without you getting some good footage of the thief. It will increase the amount of cameras you'll need, but also increase the overall security.
2. Make a draft before you start, so that you get a good feeling of the place you're trying to secure.
3. Measure distances from all cameras to the closest router, switch or DVR if you use that. Learn how to put together RJ45 cables and you will save some money there by buying in bulk.
4. Use good cables and connectors. it will save you a lot of headaches in the future.
5. Try to conceal everything as much as possible.
6. Never ever ever use WIFI cameras, unless you plan to put the feed online for everyone to see anyway. Most known WIFI encryptions can be cracked within fifteen to thirty minutes, so the hackers will have a field day...
That's all i got for now.
Stay safe everyone :)
Great points Lars!
@@NellysSecurity I find that, the more preparation you do before you start, the better and faster work you do. You video is great and I learned a few things that I haven't thought of. It's a great thing you guys are doing, and I'm glad to be able to contribute with something :)
8:16 RIP people using headphones
I reported this video and a youtube rep is looking into taking the whole channel down.
#9 is slightly off … you can get details that aren’t there in the original picture based on image processing algorithms but I am not sure you can use it as proof in a legal case. Processing algorithms have come a long way to be able to guess
#8 - the issue I believe is that the camera is setting exposure based on the brightest light it sees. If the camera has the ability to set the focus point and adjust exposure accordingly it should be ok.
But all points you made are valid … better to fix at installation than work around it
I installed 4 cameras in the summer. Worked nice. Then I noticed 1 of the cameras had a large spot on the picture at night. Discovered as winter came along, the sun set farther to the SW. Sun was hitting the camera and burned up the camera . Had to buy a new camera and made sure it did not see the sun in the evening.
x2malandy Make that mistake number 7
Number 2, is a bit hit/miss as a home user I have had the same system for over a year now and I have only used 2 cams out of 4. Either way love the video, I sent this to a friend of mine who was unsure on first time CCTV :)
The constant camera cut to different angles was kind of weird good advice tho
Mistake #7 is when you got my thumbs up.
Very good video and informative for those who don't understand how security systems should be optimized but......OMG.... that cable management though..... smh
HA!! Yes the nasty cable management can induce anxiety. Thanks for watching!
Well I guess you don't understand security systems because these were surveillance systems.
Good work. I have started watching and learning and seeing honest suppliers like Nelly's .
I truly appreciate the information 💯
9:09 maybe put there to make a point but .... like putting the camera out in the open exposed to all weather, put it under the woodwork, give it some weather protection, reduces sun flare if pointed where direct sunshine can cause issues and still get full coverage of the area you are looking at
Good suggestion! Thanks for watching!
informative indeed.
quite odd with your camera angles though.
Stumbled onto this video and glad I did. I am an experienced independent installer and absolutely agree with your assessment, however, since I've never bought equipment at Nelly's (never heard of...) I can't chime in on #1. Hope you don't mind if I link this video onto my site, I think this is useful info. that is better to know sooner than later. Thanks
Thanks for watching
Excellent video and advice, thank you for your time
Thanks for watching!
Your first advice I guess is the most valuable. It is very important to calculate pixel density from the start. I calculate ppf/ppm and DORI zones (Detection, Observation, Recognition, Identification) using graphical lens calculator from jvsg. It takes seconds but it saves time and helps to forget about miscalculated lenses.
Thank you for you video. It was very helpful. And great marketing as well.
Thanks!
This video makes you the leading expert.
I think your number one should be POSITION. I see too many hats and hoodies and no faces. One eye level camera will go a long way when identifying strangers in hats or workers in matching uniforms. I sometime place knee high cameras when i have extra.
Good point!
Agreed, and looking at placing cameras away from buildings looking in. Too many times I’ve seen huge dead zones because they put them on the building expecting some massive wide angle view. Sure, nothing wrong with having them but if you can pole mount 2 cameras on opposite sides of a building you’ll have a decent 360 to see exactly where they’ve gone.
Correct. I second that. Due to numerous terror related attacks(bombs left in movie theaters and restrooms) ,in our city, establishments were required to install both high and low level(eye level) CCTV cameras. The eye level cameras would have a better view of the facial features of the terrorists.
The eye level cameras can only be installed indoors. Installing them outdoors will make them prone to tampering or theft.
Great video. I am looking for the doorbell and home security. The information you gave was excellent. Might give you guys a call.
Love Mistake Number 7 😂😂 great video! Thanks for the info.
Thanks for watching
Nothing but the best of support from Nelly's. We've been a customer for years now!
We appreciate your business!
Great video! Picked up some great tips, the IR one was especially helpful!
thanks for watching!
Great information, I don't get the side view camera angle though.
The ending🤣
#ad
There might not be much room for image enhancement but you can try to zoom in. If it is a larger image than your tv or monitor can usually display it would be shown in a reduced resolution unless you zoom in or extract a frame and zoom in. VLC can let you extract frames and they are in the native resolution of the video despite what your monitor usually displays. There are other programs which are also free and allow frame extraction or export. That is helpful if you are hoping to read a plate or see a face.
Mistake #7, not looking at the other lucky camera... Not so lucky anymore, eh?
Victoria L no one asked you, Victoria 🙄
@@SabraDarlingGamesNo one asked you to make such grammatical mistakes by repeating my name twice in the same silly statement.
It was a hidden camera and he didnt know it was there. In reality it was a secret subliminal message for you to buy our hidden camera: www.nellyssecurity.com/nsc-642-phc-2mp-wdr-pinhole-covert-ip-security-camera-3-7mm.html
@@NellysSecurity LMAO!! He didn't know a hidden camera was aimed right at him during an infomercial he was IN!!? 😂🤣🤔
Great information for beginners. I am one!
lol, love the last mistake mentioned in this video!
Thanks for watching