Build A Longboard Deck Pt 2/3
ฝัง
- เผยแพร่เมื่อ 6 ธ.ค. 2021
- I built a longboard from scratch, well except the trucks. This was a great project and not very hard.
I found out after this video Ted Hunter invented this process to make Skateboards. He is the owner of roarockit.com where you can get kits that are better quality for the job Than what I did here.
Ling to the designer of the longboard wheels. www.thingiverse.com/thing:314...
/ kcreations
You can support My Goals on PATREON: / kcreation
Follow me on Twitter @: / kcreations1010
/ kcreations_utube
As always do all your own research into any build and do so at your own risk. This video is for entertainment and demonstration not a full how to guide. Do not replicate anything you see me do in less you can do it safe and legal. - บันเทิง
I would have never guessed that's how you build a longboard! It looks fantastic!
Thank you I am loving how it turned out.
I like that shelf on the back in your intro. Keep it up.
I was seriously thinking about getting away from that shelf intro. You like it Ill keep it and Thank you for the encouragement.
I found out after this video Ted Hunter invented this process to make Skateboards. He is the owner of roarockit.com where you can get kits that are better quality for the job Than what I did here. I also wanted to mention I did not put the trucks far enough ahead and suffered wheel bite. This was easy to drill new holes but I want to mention it so you don't do the same.
Ok that thing looks slick. Good job on that.
Thank you.
Looks amazin! was that back hub set up to make it a powered board? looked like a sprocket or gear on the inner left? wheel.
I put allot of teasers in my videos but not many of them get called out. Good eye :) Might be a while on it though.
I always appreciate quality woodwork... like that awsome table you made.
Neat to see the process. Especially done well.
On a separate note... still doing that trick with wires eh? Didn't it used to be for cutting pens in half? 😉
Thank you and yes I did :)
Thinner layers of paint can make the paint stick and on intervals like 5-10 mins. Good Job though. And if you want "steps" for drop through's make sure to make depression on the mold depper and not have aggressive drops. Hope it helps good job though
I hope to make a drop through in the future and I'm glad for the insight. Thank you.
Can you feel the difference betwin your to type (Factory & fillement looking) of wheels while ridding ?
At first I could they seemed to slow me down fast. This went away then they seemed smoother than the (All Terrains) I ran. What I realized this winter when I was thinking about part 3 is that I think they took like a month to fully set up so they were softer than I normally ride. Also just in case part 3 will tell you why I wouldn't recommend them if you are running electric but I am going to try to work on a solution. Plz If you like what I'm doing share it. :)
@@KCreations4You im running an electric 🙃yes i can't wait for the part 3 !