I make free 220v Welding Machine from 1 Kg Salt , future ideas 2023
ฝัง
- เผยแพร่เมื่อ 21 ม.ค. 2022
- ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ HERE: / @kinghomemade
#freeenergy
#weldingmachine
#kinghomemade - วิทยาศาสตร์และเทคโนโลยี
![[LIVE] : ONE ลุมพินี 65 | คู่เอก "จ้าวเสือใหญ่ vs ผึ้งหลวง"](http://i.ytimg.com/vi/TDpOh5eEJKw/mqdefault.jpg)
I turn HDD computer into a 220 electric battery high performance th-cam.com/video/gkLCE1LI_9M/w-d-xo.html
Naebalovo2000 ot rukozopa
Traduzi em português
as an electrician, it is a very dangerous custom welder, if the phase had been in contact with the element that holds the metal part (luckily) around it would have energized the floor, the cement looks dry I imagine it could reduce the electrified sector. the mineralized water with salt greatly improves the conductive capacity of water so if you measure voltage between one of the contacts that was Phase, you would be directly exposed to the 220V fatal to a person. For this reason the welding machines even the electronic ones have a transformer that separates the 220V to deliver a reduced voltage that will not electrocute the worker.
Medyo delikado yan.water rheostat ang application nyan.ginagamit koyan sa pantesting ng generator.the more na inilulubog mo ang plate tumatas ang current nyan.kapag tinaas mo ang plate na nakabaon sa tubig bababa ang ampirahe nyan.kaya dapat adjustable ang plate mo.
you know danger=views lol
thanks for the info
Just make youtube to get views
Viewer number one but safe number 100
Para evitar que los polos se lleguen a juntar en los postes, se les debe. Pegar a cualquiera de las dos láminas un pedazo de plástico o goma o madera que evite que se iban, especialmente cuando se utilizan voltajes mayores. Y se debe tener un orificio de escape a los gases que se liberan dentro con una manguera sellada para evitar que se inflaman.en contacto con cualquier chispa que por defecto se produzca en el exterior del pote en la unión de los tornillos. También, si polarizas las corrientes de salidas con diodos de alta capacidad. Podría superar al invertir.
Yes good friend. SUCCES. I like it
The salty water is working simply as a resistor, and heats a lot. If you weld for too long , you need to drill holes on those bottle caps or the steam generated will explode the bottles an throw boiling water and glass or plastic shrapnell all over.
Algo, use only one larger bottle, só you can connect the ground line from the incomming power tô the part you are wellding, preventing stocks.
Electrical shocks
Are Series or Joking??? You didn't understand that his contents all are fake???
@@moya9450 that's not fake but dangerous watch mehdi ( electroboom) he try it and he said it work but dont weld to much just a color black it weld not like a transformer and he said its dangerous
hebat bro, ini benar2 menginspirasi, adapun terkait dg keamanan, saya yakin tinggal disempurnakan sedikit saja beres itu dah, mannnnnnntab dah pokoknya ....👍👍👍
saya yakin kedepannya ini akan membuat para penjual mesin las berfikir berulang² untuk menjual dagangannya dg harga yg sekarang.
Betul sekali,seperti nya bisa di patenkan cara seperti di atas
Good....... 👍🏼👍🏼🤭
Thank you! Thank you! Thank you!
Your invention made me rich! I've built 10 welders like this and sell them with 1300$ each. Now I will build a factory called "h2o2weld" and sell this product world wide!
Thanks mate!
Mantab... Ilmunya semoga bermanfaat... Dunia Wak.akhiroh.... bagi orang lain yg memfaatkan ilmu ini...sebaik baiknya ... trim's Broo
Ilmu yang sangat bermanfaat buat orang lain semoga mendapat barokah dari Allah SWT sayapun ingin mencobanya
Full ⚡ danger hai
!!! Молодец!!!
بسیار عالی❤❤❤❤👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌
Nothing more than just a child’s play,HAZARDOUS!
Yo lo habia visto hacer eso mismo, pero conun solo recipente de agua salada... Buen trabajo, buen video.
there is a very good reason why welders don't weld at 220 volts typically between 24 and 36 volts as to not kill the person welding
Very good brother. From Bangladesh.
Ikutan nyimak bang, kreatif banget, sukses ya bang 👍👍👍
This is a super good idea and way safer than using an outdated technology like transformers and other such nonsense. Im using a couple of 55 gallon drums to step down my illegal tap into my city's 10kV feeder line that runs behind my house on the high tension line towers. I get free electric and Im in the process of adding a heat exchanger system onto the 55 gallon drums for a hot water supply, therefore reclaiming even more wasted energy. And here's a PRO tip: By not isolating my service, a single insulated wire is all that is required to get power anywhere on my property.
bohon
Sir. You have good theories
Excellent work . Thank you .
Aku suka video ini sangat bermanfaat untuk pekerjaan saya.....terimakasih videonya kak
very very very wonderful > Thank you from Egypt .
Need to be EXTREMELY CAREFUL WITH THE SEALS ON THE JARS! The bubbles you see is NOT water boiling, you're creating hydrogen gas in one jar, and oxygen in the other. You need soild jars that can withstand a molten ball of metal sitting on it from the welding. As this is HIGHLY EXPLOSIVE!!! LOOSE SEALS ON JARS AND OPEN VENTILATION ARE A MUST!
Even better to seal and capture the oxyhyrogen gas and use it. In the case of welding, - you could trap the gas in a canister and use it for a blow torch.
This is Electrosis of salt water. Your creating highly EXPLOSIVE games in proximity to a million sparks flying around waiting to detonate it!!!!
I think chlorine gas may also be produced if the salt is common cooking salt ,chlorine gas is poisonous!
He is not making hydrogen, because it's AC and the leads are isolated, bubbles are oxygen only I think. You need DC to make hydrogen
Both jars produce hydrogen and chlorine
Yes indeed....i don't believe this is in any way safe...very dangerous...a good way to cause an explosion...and possibly meet your maker
That salt he's using look's like epsom salt by the flaky granulated look...i use epsom salt to rebuild car batterie's...you can year's more use doing it and it's more than a hundred time's cheaper than buying new one's
Excellent ideas. No need for welding machines 👍
Noo
Uh oh!! Here come all the professionals with 153 years of experience to tell you how dangerous this is!! Watch out!
बहुत बढ़िया आईडिया है
Those two salt jars acted like two resistors to limit the current so that he didn't trip the circuit breaker. But the current was too low, it was only enough to make some arcs, not enough to do any welding. At 10:24, you can clearly see it didn't really do any welding on the steel surface!
So he only invented a sparkler for Christmas.
Verdade mais solda porque eu já soldei muito com água e sal só que eu fiz um regulador de voltagem tipo um aparelho mesmo era em um galão de 20 litros com um quilo e meio de sal,
It suprise me as nothing happened to the iron bar welded,I am think need more volt of current if wus not wrong,..still find,,
good, so I kicked this video out of my storage, it's a fake welding machine
He was definitely fusing the electrode to the base metal. You heard that "fry" noise and seen both melted flux and steel.
very helpful man. thank
Poor gullible fuck. 😎 Stop calling yourself "Technical" please! 🤣
Very ingenious video ,well done ,We like to believe in things that seem real, not facts, because truth requires responsibility.
Mantul 👍👍👍suatu ilmu yg sangat berguna, inovatif sekali 🤔🤔maksh telah berbagi ilmunya bro...🙋🙏🙏
Takutnya nyetrum
When I was in highschool I was made This project but it needs more Careful
แปลไทย
Your english was not good
great idea !!!!
Glad you think so!
Bro its fake.... everything this guy makes is fake
Yes is very good
Zeer gevaarlijk, hij wekt de indruk dat je zo 220 volt op die potten kan zetten. Zeer gevaarlijk!!!!!!!!!!!!
Tremendisimo!!!!!
What you mean?
@@kinghomemade, acho que ele quis dizer: super tremendo ou incrível. 👍
Super awesome 👏
Really very clear demo. 👋👋👋👋👋👋👋👋👋👍👍👍👍👍👍👍👍👍👍
Se conecta la clavija a la luz como caiga como conectar cualquier aparato doméstico por favor quiero saber ese detalle gracias por su amabilidad de enseñar lo que dios les a dado su buena humildad y bendiciones amén
Дятел ты хоть Бога в эту аферу невпутывай. Маячня это всё.
Parabéns 👏👏👏 ótima invenção foi muito útil
To jest śmirtelnie niebezpieczne , bo spawasz pełnym napięciem !!!!!!!!!!!!!
Fake. Don't do this. First he has to show where is the current comes from?. Already he connected welding transformer. Most of the videos aer fake. Totally humbug.
this is very dengerous...
Ide cemerlang,patut ditiru 👍🙏
This is great. It deserves a Darwin Award.
I think I'm the only one who got this joke so far! 😂
Hey he's got his "safety gloves" on what could possibly go wrong
Монтируй видео аккуратней, видно стыковки.
Электроды в банках, беленькие на большом удалении друг от друга. А потом хоп почернели, стали короче и стоят уже близко. Для справки тебе, если там обычная вода и соль, то вода будет мутнеть и пениться, а электроды станут матовыми и разъедаться солью.
Короче ври красиво, а не так топорно.
Что не так то? Соленостью подбираешь сопротивление и в путь.
@@FLomasterZ ну или содой. Но это все ровно гон
Trimakasih ilmu nya🙏
Good idea, But it very dangerous
For anyone thinking that salt somehow steps up current: his socket is already connected to a welding transformer of some kind. The jars only introduce a useless resistance, if you want to add resistance to your circuit, there's ton of better ways.
It seems to work
Once the plastic jar heated up and collapsed, someone must quickly pull up the plug from the power supply.
No, it actually works.. the salt acts as an "arch" for the electricity to cross on..
If you use distilled or fresh water it will not cross.. salt water acts as a transformer..
Making the water conducive..
But the water boils normally..
His didn't.. I asked him why..
Eu já soldei muito só com água e sal .não tinha dinheiro pra comprar um aparelho de solda o geito foi inventar um.e olha que eu nem tinha celular com Internet pra pesquisar como fazer:
@Eddie Hitler the welder is so idiot
The stick didn't solder anything just melted the rod but no impact for metal maybe good for aluminum well if that was aluminum then it didn't work effective
Keren, lanjutkan sukses atas karyanya
❤️❤️❤️❤️❤️❤️❤️👍 Bismillahirohmanirrohkhim Assalamu 'Alaikum salam wrhmtullohi wbrktu
I SUCCESSFULLY EXPERIENCE IT REALLY WORKS
@Off The Grid thanh you
Kinda dangerous..
@@thandongsangtao thank you*
Yes it does
@Off The Grid ,such a troll
Bien bueno hermano una pregunta y la misma instalación no me sirve para 110 voltios gracias Dios me lo siga bendiciendo grandemente espero su respuesta
Ilmu membuat alat las 👍 salam sukses teman, mantap enak dilihat, terimakasih teman
Nice sir for the tutorial thanks po
Looks like this is good for making holes in metal!
👍🏿
Mau,beli,,berapa,harganya
Beautiful
Another idea contributing to my mind. My concern is how to adjust the desired current for a thin sheet welding. Thanks.
Less salt.
Buy a real welder.
Wah penemuan baru Bos ini mau habis nih sukses terus
greatfull idea
为更安全更少危险：
应该地线端直接与焊件连接，
二个盐瓶互串联后与焊夹接？
但是空载开路时会致电死人！
不建议使用此220v简易设备！
Muy buena idea te felicito y gracias por el consejo 🤠
Very nice
thank, you for you're video.
this well be can used, in something an emergency situation..like in remote place that sometimes need to welding something but, a safety welding machine, is not as vailable..thst bottle is well cause af explotion.when its long time used....i say is only for emergency idea..in time theres no present of real welding machine...i mean safety one..its only representation.of. ideas.? thankz for your efforts..
7
,,,
the cable path from the combination socket to the mains is not visible bro. Please make another tutorial with some thickness of the material being welded.
Good and successful
Greetings from Doctor DIY
Гениально! Добрый человек, только надо крыши пластиковые, а то обычно железные! Кто-то без внимания может повторить и бабах 220в🙏
Akıllıca ve pratik 👏
شكرا لهذه القناه
Terima kasih buat ilmunya
well done
Thank you! Cheers!
I UNDERSTOOD THE WHOLE PROCESS BUT COULDN'T UNDERSTAND HOW HE TOOK OUT THE WELDING ELECTRODES FROM HIS RECTUM...!!!! AT 9:06 !!!
This video it's a good idea so thanks my Prather
Menginspirasi...👍
Good videos for entertainment and to make our brains question things. Keep them up
Good 👍
Blz. Uma lição bem espricador pra quem tem vontade de aprender com muito cuidado no trabalho. Aprendizado.p.o.futuro.sempre.
This is the BEST, Best way to end up in the morgue.
Dear video maker, how often the water/salt needs to be replaced ? And does this metod have the power to join 2 peaces?
No. Never
Hello Friend! To solder stronger, add more salt. about the salt/water exchange, yes very often
The theory behind this technique is through salt water the voltage gets little bit decreased and gets increased in current that's why the light bulb 💡 didn't close to its fullest and high amps are needed to do a welding 🥽
Yes. The closer the electrodes are to each other in salt water, the lower the voltage and the higher the current.
No, this is a simple resistor, the lower the voltage the lower the current. Water can't step current up.
12 Volt se how to make welding machine ?🌀
AC / DC ?🌀
It's dangerous idea bro
Terimakasih untuk ilmunya suksess
Supply voltage reaches welding rod &work,so shock can occur.Autotransformer of suitable range is better.A high power capacitor will do the work,for a few minutes.
that's y he uses gloves
auto transformer costly
B
Potr porana tareka hy
0gunputhbeir
Awesome, is the best 👍
Thank you! Cheers!
Este es Rafla no anda con tanta m entendible i ya i eficas este si es bueno gue bonito felisidades
ΑΝΤΕ ΦΤΙΑΧΤΟ ΚΑΙ ΚΑΛΟ ΠΑΡΑΔΗΣΟ
😂😂😂👍
I've done and do it all the time..
But can you tell me how your water sealed in jars doesn't overheat to a boil.. or did you just do it for very short bursts..?
The water inside the jar is not getting heat.. Because there is no heating filament.. The water iside t comes bubbles because of the pressure of current energy.. .. We do this before our experiment due to electronics actual evaluation ..😊😊😊😊
Good experiment.weldone keep it up.
Holy smokes and never vented it at all, I'm surprised the jars didn't pop from the hydrogen being created ... A couple of things the leads got so close in the jar because the water was getting so hot I thought surely he'd fry himself
I don't understand the saltwater? Theatrics? Why not just plug it in without the saltwater? Neat though..
You can't do that. You'd just short it and blow a fuse. Did you see how dim the light bulb is? I don't know if it's fake, or not, but a direct connection to the power would just blow the fuse.
@@johnnyblue4799 why? It just wouldn't be enough to weld with if anything I'd think..I mean the saltwater isn't stepping it up from 110 to 220.I could be wrong I don't know if it's fake or not either,I think it has to be though
@@badassbees3680 An arc welder, in its basic form, is just a transformer which lowers the voltage and permits high currents. You don't need to step up the voltage to weld. You need high amps.
en.wikipedia.org/wiki/Welding_power_supply#Transformer
My first stick welder was just such a contraption which was homemade by an electrician and it worked fine. Only if couldn't vary the amps. It was one setting only, which worked fine for 2 mm sticks and not very thick pieces to weld. Also not good for very thin material, but then no stick welder is really good for that.
So coming back to the video and your initial question, if you put the stick against the piece you're welding and connected directly to the power outlet, it would be exactly like taking a wire and sticking both ends into the power supply. There will be no load, which is basically what a short circuit is. It will only blow a fuse.
What I don't understand is how (or if) the salty water behaves like a transformer.
@@johnnyblue4799 I got what you're saying now👍
The salt makes the water more conductive, and the water is working like an isolator to the circuit breaker. Do this without the isolator and you just trip the breaker, or cause electrical fire from short circuit
very very nice
Very dangerus
Сварщик от бога! 🤣
yes
😂
@@kinghomemade Hello, will it produce hydrogen? Will there be a danger of explosion if there is hydrogen in a sealed bottle,
Wow! Kudos brother! 🙌
Thank you very much
Sir, if You get welded forever to the floor by 220 Volt electrocution…just blame your super Invention.
Really I don’t blame You or the inventivness of your mind, but You Tube to publish such videos for the Viewers:
A free invitation to the electric chair.
Have fun, Paul
👍👍good ider🤗
Its an amazing invention, your great man. What is the voltage source? What is the water and salt solution?
Sir, if You get welded forever to the floor by 220 Volt electrocution…just blame your super Invention.
Really I don’t blame You for your inventive mind, but You Tube to publish such videos for the Viewers:
a free invitation to the electric chair.
Have fun, Paul
A bit dangerous. You might want to check the amperage you're pulling from that. If you have too much salt, you can burn up your breaker box and even cause a fire. I did it myself with a similar setup. Had to replace the breaker box and breaker.
Wouldn't the breaker trip if it exceeds a certain amount of amperage being used?
@@anyvideo8876 Suppose to, but my breaker was cracked so I guess it wasn't working right.
Terima kasih info terbaik
Hadir Bos...