It's great seeing you younger guys carrying on the old school traditions. I'm 65 and I thought we would be the last generation to carry the torch as my kid (who is 42 now) never seemed to have any interest in bikes. You are very fortunate to have the opportunity to lay hands on the last of these old gals that are in need of TLC. Good on ya Lad!
@@jamesmateer7732 Well at least it wasn't "the diabitis" as Wilford Brimley would say. (I'm sure you can appreciate the old school dark humor.lol) Keep a tight leash on that young un'!
I’m a lucky Dad. My 27 year-old son was brought up wrenching, same as I was….my Dad is a ‘79 year-old ‘wrench’. He started building bikes in the ‘60s. Anyway, my son is well on his way….he’s already built one award winning bike, a full custom ‘77 Yamaha Cafe Racer, and he has a few more in the works as we speak. I always take a minute to pride him on his hard work and dedication. I remember being 27 and having the wind knocked out of my sails a time or two….we have to keep on encouraging these young guys to keep pushin’.
I could watch these all day! Your passion and knowledge is second to none I've seen. I learn so much watching along and it's contagious to see your joy for these beautiful creations pop through the screen. I know more about the new harley motorcycles but i wish this knowledge were more accessible along with the bikes. I would hate to see it fade out. Thank you for all you and your family have done for the culture. I'm 36 today and watching you makes it worth it like I'm there!
My buddies and I re-build pre-WWI "barn-find" motorcycles! "ACEs", "Curtiss's", "Excelsior's", and others, built on Columbia and Wright Bros. (yeah those Wright Bros.!) bicycle frames, many street bikes, but some alky burning "board track racers"! Riding a 61 CID 65 HP board track racer with no brakes, no clutch, no throttle, no gears, only a kill switch to control your speed on BICYCLE TIRES pumped up to 90 PSI on a 1/4 mile dirt track takes some big brass ones! I can't imagine Glenn Curtiss racing on an 1/8 mile track of boards with 32 OTHER racers, who would KICK, PUNCH, RAM each other at over 115 MPH for a $25 or $50 prize!!! I can appreciate your efforts. Some of us are machinists who CNC new pistons and rods, even crankshafts. Many of our street bikes are total loss lubricated, and all the racers are, and all these ancient engines use 100% caster oil. Great work!
When I bought my badly abused 1947 el Knucklehead in 1977, it took me a while to figure out how to start it; timing sequence, fuel accomodation, checking for the correct needle settings on an M-36 Linkert, and all the rest. I finally got it down to a science but it was always a process. Not like modern Push a button and go bikes. Now, I'd give my left nut to have that bike again. Yes, I entered the drawing for the Knuck! 👍
I started watching your father‘s videos. What’s in your barn I love every episode. He did. He was one of a kind and one of the best. I thought he could never be replaced, but Matt, your videos are just as awesome. I love how you explain things when you’re going through the bike I’m sure your father is looking down right now at you and smiling with that silly grin on his face with his cigar hanging out of his mouth your father would be proud, brother🙏🇺🇸
Love seeing these beautiful pieces of history coming back to life, you have done an excellent job of keeping your dad's dream and vision alive and well. You should be very proud of the work you've done.
That is an amazing bike. Its always good to know the little intricacies about those old carbs. That information is going on paper so I never forget. Thanks for all you guys do. We will be coming up this year.
1952 KITT 750 cubic inch flat head side valve; 1969 on my way to the Marines and Vietnam, I had to save it with a friend, I got back home after four years, he had sold it. What’s the point: well it sounded just like this bike, loud and primitive: I really enjoy how your channel takes me back to my youth; Dale has got to be so proud of what you’ve accomplished since he took that last ride! 👍🏽 ,
@@chriswilgus4752 I supposed since I was gone for four years, he figured it was okay to sell it. Upon returning I asked for it numerous times and he would heehaw until I finally got the truth. I recently heard where it might be and I’m going to try to buy it back!
Great work, everyone! She's screaming to scream as evidenced by the kick start return spring busting out of its long slumber with feverish rust red anticipation! 😉 Sweet ride! Thanks for the most enjoyable content. Really diggin' it!
I wonder if you have one of these tools in your shop ? Its an aluminum block threaded for a spark plug in one side, and a thick plexiglass window in the other, then add a tire valve, or a shop air hose fitting in one of the open edges . I found the best size for this device is to use a an aluminum block that is 3x3 inches square and 1 inch thick. I bore the middle out and make sure that it's big enough so that when you put a spark plug in it, that you can readily see the plug gap. I would also drill and tap the sides of it, so I could test systems with other sizes of plugs. You connect it to shop air at 100-120 psi to pressurize the block. You also add a ground wire with a cylinder clip. The idea of this device is to test the ability of that bikes ignition system. If an ignition system is weak , it won't throw a spark under compression, but if you lay it out on the cylinder head it will.. I don't have any right now, of course I lent them out and never got them back, but I could easily supply a diagram.
I don’t even own a motorcycle but I just love what you guys do at WTT! I first heard of your dad by watching American Pickers! Keep on reviving those pieces of mechanical history!
Watching you gas out kicking that thing reminds me of my first new bike a 1967XLCH.mag fired with a Tillotson carb. 50 degrees out trying to get it to fire so I could get to work. By the time I got it lit I was down to my 'T' shirt. Finally got smart and swapped the Tillotson for an earlier DC Linkert which helped a lot with starting.
I used a treadmill to start the motorcycle I just ratchet straped it down to the treadmill turn it on put the bike in gear hold the clutch in you know and let it go fires right up . Your videos are awesome 👍
Reminds me of starting my '65 XLCH with that old Fairbanks Morse mag on it. I'd have to kick it a hundred times. I finally put a distributor on it after installing an oil tank with a space for a small battery and it was a typical one kick Harley after that.
In australia we spray stuff called START YA BASTARD into carbies really works well,someone just needs to invent CAN O SPARKS,to help as well,another enjoyable video.
My knucklehead had to kick a gazillion times until I called morris and they said if you don’t want to kick it 14 times you should run a .020 plug gap. Stock plug gap was .030. I know it’s a racer, so maybe I’m wrong.
ahhmann great job ! i luvit' when you rev it up the rust cloud coming off kick start cool and thank four your carb,instuctions luv what you guys do !?! thankyou...
Racer mentality: I saw the needle set up was not stock. In too deep. Saw from the bench carbs set up was different? Not the expert. Like the shop rag for choke try. Dig the rust coming off the kick spring! A monster no smoke. Instant throttle response. Knee pad is recommended. Tweaks matter. You commented on the carb numbers being filed off or missing. Now why would someone do that? Peace from West Texas. Killer content. Legacy of our Ascencion.
This channel is so awesome. Love watching it, because you make it look easy and it's not. What do you do with the bikes after you get them going? Does someone restore them or do you just leave them as is?
Couldn't imagine taken that monster over a TT jump. Use to go to the TT races in Peoria in the mid sixties. By that time BSA and Triumph ruled the day.
Sounds great I had a BSA 750 and you could kick it for a hour and it would not start and walk away and come back 15 minutes and one kick and it would start
I think sometimes they get flooded and can’t get the gas to atomize so it’ll mix and fire off. Seems to be even worse on high performance stuff since it’s usually setup for high rpm so has very low velocity at idle/starting. And, sometimes if the ports are polished they’re so smooth there isn’t turbulence to get the gas mixed in better.
Usually when old school heads got larger valves and the intake runners were modified everything worked well WFO plenty of flow . But at starting ( kick) R.P.M. velocity was lost into the combustion chambers and the intake charge didn't stay atomized causing a fuel rich condition that inhibited the proper air / fuel ratio to initiate combustion. Or maybe there was dirt in the mud valve........
I am a very experienced drag racer. Most of my racing has been sportsbikes, and a few street cars before that. The last bike I raced I campained it for six years it was a 2000 busa. If you are looking for a pro piolet to drag race any of your bikes I would be more than happy to offer my skill set to your cause.
Hahaha my 74 ironhead with super e on it was so quirky. First kick sometimes as long as it was primed but I’d still adjust for temp. Or…. 15 or so kicks. I know it was all down to the carb adjustments but I’m 62 and just got tired of kicking it. Sold it and bought a heritage springer with EFI. I’d actually dream about it NOT starting.😂
Every day is a skool day 😁thanks guys
I love seeing old machinery of any sort coming back to life, and migod, that's probably the nicest sounding HD ever.
I love Maggie Valley ..i use to vacation there i the 70s i met old Popcorn Sutton there...the OG hillbilly! RIP
"Its gonna start on one kick!" Wink, wink. Awesome!
We LOVE you Matt! Lots of health and long lives to all of the great folks at Wheels Through Time.
Every time I’m left shaking my head at every awesome project 😮
It was a pleasure meeting you yesterday, Matt! I could spend days at wheels through time! I will be back!
Starting a kick-start-only Harley is becoming a lost art. Each bike has its own personality.
Super cool Matt, l use to race TT back in the early 70's. That is like the Arch of the covenant. Rarest of the rare. Thanks WTT.
It's great seeing you younger guys carrying on the old school traditions. I'm 65 and I thought we would be the last generation to carry the torch as my kid (who is 42 now) never seemed to have any interest in bikes. You are very fortunate to have the opportunity to lay hands on the last of these old gals that are in need of TLC. Good on ya Lad!
Don't worry pops I'm 65 and I've got a nine year-old who just loves antique motorcycles in spite of the fact that one took my leg.
@@jamesmateer7732 Well at least it wasn't "the diabitis" as Wilford Brimley would say.
(I'm sure you can appreciate the old school dark humor.lol) Keep a tight leash on that young un'!
I’m a lucky Dad. My 27 year-old son was brought up wrenching, same as I was….my Dad is a ‘79 year-old ‘wrench’. He started building bikes in the ‘60s. Anyway, my son is well
on his way….he’s already built one award winning bike, a full custom ‘77 Yamaha Cafe Racer, and he has a few more in the works as we speak. I always take a minute to pride him on his hard work and dedication. I remember being 27 and having the wind knocked out of my sails a time or two….we have to keep on encouraging these young guys to keep pushin’.
Amazing Racer, can't wait to see it in August!
What an amazing sound. Such an exceptional piece of motorcycling history...
Your dad would be proud. that engine sounds good!
I could watch these all day! Your passion and knowledge is second to none I've seen. I learn so much watching along and it's contagious to see your joy for these beautiful creations pop through the screen. I know more about the new harley motorcycles but i wish this knowledge were more accessible along with the bikes. I would hate to see it fade out. Thank you for all you and your family have done for the culture. I'm 36 today and watching you makes it worth it like I'm there!
Good stuff as usual . I hope Matt realizes he has the best job in the world.
It’s top of the line 1930’s technology but God help me do I love that sound!!!
Awesome job gents!!!
My buddies and I re-build pre-WWI "barn-find" motorcycles! "ACEs", "Curtiss's", "Excelsior's", and others, built on Columbia and Wright Bros. (yeah those Wright Bros.!) bicycle frames, many street bikes, but some alky burning "board track racers"! Riding a 61 CID 65 HP board track racer with no brakes, no clutch, no throttle, no gears, only a kill switch to control your speed on BICYCLE TIRES pumped up to 90 PSI on a 1/4 mile dirt track takes some big brass ones! I can't imagine Glenn Curtiss racing on an 1/8 mile track of boards with 32 OTHER racers, who would KICK, PUNCH, RAM each other at over 115 MPH for a $25 or $50 prize!!! I can appreciate your efforts. Some of us are machinists who CNC new pistons and rods, even crankshafts. Many of our street bikes are total loss lubricated, and all the racers are, and all these ancient engines use 100% caster oil. Great work!
When I bought my badly abused 1947 el Knucklehead in 1977, it took me a while to figure out how to start it; timing sequence, fuel accomodation, checking for the correct needle settings on an M-36 Linkert, and all the rest.
I finally got it down to a science but it was always a process. Not like modern Push a button and go bikes. Now, I'd give my left nut to have that bike again. Yes, I entered the drawing for the Knuck! 👍
I started watching your father‘s videos. What’s in your barn I love every episode. He did. He was one of a kind and one of the best. I thought he could never be replaced, but Matt, your videos are just as awesome. I love how you explain things when you’re going through the bike I’m sure your father is looking down right now at you and smiling with that silly grin on his face with his cigar hanging out of his mouth your father would be proud, brother🙏🇺🇸
Thank you for the very kind words. We miss him everyday!
Love seeing these beautiful pieces of history coming back to life, you have done an excellent job of keeping your dad's dream and vision alive and well.
You should be very proud of the work you've done.
That is an amazing bike. Its always good to know the little intricacies about those old carbs. That information is going on paper so I never forget. Thanks for all you guys do. We will be coming up this year.
What beast well done bro good work another golden oldie running again
1952 KITT 750 cubic inch flat head side valve; 1969 on my way to the Marines and Vietnam, I had to save it with a friend, I got back home after four years, he had sold it. What’s the point: well it sounded just like this bike, loud and primitive: I really enjoy how your channel takes me back to my youth; Dale has got to be so proud of what you’ve accomplished since he took that last ride! 👍🏽
,
Why did your friend sell it? Did you tell him to?
@@chriswilgus4752 I supposed since I was gone for four years, he figured it was okay to sell it. Upon returning I asked for it numerous times and he would heehaw until I finally got the truth.
I recently heard where it might be and I’m going to try to buy it back!
Sounds great! I love the pipes, and that primary cover is perfect.
That being said Matt you and your dad are the man among men I hope your dad is resting in peace
Man you have my dream job what a boss bike and the rip thru the museum at the end was the cherry on top
As rough as it looks, it’s beautiful and sounds like a beast! Nice job guys.
You worked it out pretty quickly. That never give up attitude you got kept you kickin' like the ol mule we had growing up. 😅
Nice video! Only: Where are the youngsters? Have they lost the noble art of kick starting a motorcycle??
Great work, everyone! She's screaming to scream as evidenced by the kick start return spring busting out of its long slumber with feverish rust red anticipation! 😉 Sweet ride! Thanks for the most enjoyable content. Really diggin' it!
I wonder if you have one of these tools in your shop ? Its an aluminum block threaded for a spark plug in one side, and a thick plexiglass window in the other, then add a tire valve, or a shop air hose fitting in one of the open edges . I found the best size for this device is to use a an aluminum block that is 3x3 inches square and 1 inch thick. I bore the middle out and make sure that it's big enough so that when you put a spark plug in it, that you can readily see the plug gap. I would also drill and tap the sides of it, so I could test systems with other sizes of plugs. You connect it to shop air at 100-120 psi to pressurize the block. You also add a ground wire with a cylinder clip. The idea of this device is to test the ability of that bikes ignition system. If an ignition system is weak , it won't throw a spark under compression, but if you lay it out on the cylinder head it will.. I don't have any right now, of course I lent them out and never got them back, but I could easily supply a diagram.
JUST LOVE IT., HD REAM .....
For Matt is nothing hi can fix his dedication to restore this monocycle are unique he puts 200 % on every job that he doesn't incredible 👍😎
More cool Harley history, always worth watching.
If you enjoy Harley JUNK, yea...lol
Love this stuff! I got a kick at seeing all the old grime fall off of it when it was started even some rest was even puffing out of it so damn cool! 😂
Cool bike guys, great sound.
Dude 🎉has humongous passion and info on this lovely 🎉Harley Davidson
I don’t even own a motorcycle but I just love what you guys do at WTT! I first heard of your dad by watching American Pickers! Keep on reviving those pieces of mechanical history!
I shoulda took a selfie when that thing fired up! Dang. that thing sounds sweet!
Perseverance is key when you are messing with old iron, good job 👍
Great job love seeing it come alive thanks for the update have you and the family a great 4th July later 🇱🇷👍😁
Watching you gas out kicking that thing reminds me of my first new bike a 1967XLCH.mag fired with a Tillotson carb. 50 degrees out trying to get it to fire so I could get to work. By the time I got it lit I was down to my 'T' shirt. Finally got smart and swapped the Tillotson for an earlier DC Linkert which helped a lot with starting.
My thanks go out to the Bearded One for putting me on to your site. Great stuff.
I used a treadmill to start the motorcycle I just ratchet straped it down to the treadmill turn it on put the bike in gear hold the clutch in you know and let it go fires right up .
Your videos are awesome 👍
New to the channel cool video looking forward to see more stuff
Beautiful bike Matt. You’re doing a great job!!! Lots of memories you and Dale. BJ OHIO
Beautiful machine listen to her sing 🎉
Mean sounding and looking racer!!
I was hoping to see this bike outside on a ride, but it’s amazing as is!
Awesome bike !!! Thanks for the enjoyment.
you guys are awesome cheers from Aotearoa [New Zealand ]
Reminds me of starting my '65 XLCH with that old Fairbanks Morse mag on it. I'd have to kick it a hundred times.
I finally put a distributor on it after installing an oil tank with a space for a small battery and it was a typical one kick Harley after that.
I like watching them work on old bikes good looking motorcycles
When Dale said, What's it gonna sound like, I said to myself "exhaustion". Been there, done that! Fun video, thx.
In australia we spray stuff called START YA BASTARD into carbies really works well,someone just needs to invent CAN O SPARKS,to help as well,another enjoyable video.
I have several cans of compression I pour in my bike when a cylinder gets low
Can’t afford to donate but I’ll comment and like the video! Likes are literally the most important thing for a TH-cam channel!
Absolutely amazing....that thing sounds bad ass Matt....
Awesome. I'll have to come back and see this one.
That sounds great good job !
is that what they called the bombsight linkert , the one with the booster venturii discharge nozzle ? those were choke less at least the ones i seen.
that thing sounds like a monster!
So did you have to take the clutch hub back off to put on the primary chain?
My knucklehead had to kick a gazillion times until I called morris and they said if you don’t want to kick it 14 times you should run a .020 plug gap. Stock plug gap was .030. I know it’s a racer, so maybe I’m wrong.
Curious how much power this old racer makes and how fast it is. Would it surprise me? Or would it have a hard time keeping up with an 80cu in Evo?
Was hoping for a burnout! And was not disappointed!!
ahhmann great job ! i luvit' when you rev it up the rust cloud coming off kick start cool and thank four your carb,instuctions luv what you guys do !?! thankyou...
I'm a triumph man myself but .....this old lady is how a harley SHOULD look like 👍
if i ever visit America, the only place i want to visit is your museum 👍🤜🤛 keep up the fantastic vids as only way i get to see it
Racer mentality: I saw the needle set up was not stock. In too deep. Saw from the bench carbs set up was different? Not the expert. Like the shop rag for choke try. Dig the rust coming off the kick spring! A monster no smoke. Instant throttle response. Knee pad is recommended. Tweaks matter. You commented on the carb numbers being filed off or missing. Now why would someone do that? Peace from West Texas. Killer content. Legacy of our Ascencion.
This channel is so awesome. Love watching it, because you make it look easy and it's not. What do you do with the bikes after you get them going? Does someone restore them or do you just leave them as is?
Motor sound strong ! Great find....
Absolutely love it!!! Cool racing HD history Matt!!!!
You must drive the whole family crazy opening your presents Christmas morning
Very cool machine , very good video . Thank you for taking the time to post them for us .
That is beefy sounding!!
Awesome!! 😎
Couldn't imagine taken that monster over a TT jump. Use to go to the TT races in Peoria in the mid sixties. By that time BSA and Triumph ruled the day.
Wow somebody went full Frankenstein on the engine modifications . Too cool
VERY VERY COOL
18:07 🤣👌🏻 HAULING ASHES 👍🏻👍🏻👍🏻👍🏻👍🏻 EXCELLENT
80 ci = 1,310cc and so that is a big engine !
Beautiful sound
Awesome, thanks :-) what a sound; Lucky bike having you guys around!
Love it- Brilliant job
Sounds great I had a BSA 750 and you could kick it for a hour and it would not start and walk away and come back 15 minutes and one kick and it would start
I think sometimes they get flooded and can’t get the gas to atomize so it’ll mix and fire off.
Seems to be even worse on high performance stuff since it’s usually setup for high rpm so has very low velocity at idle/starting. And, sometimes if the ports are polished they’re so smooth there isn’t turbulence to get the gas mixed in better.
do you have people offering their bikes or you have someone searching for you.
I'm amazed how many beautiful bikes you find
Usually when old school heads got larger valves and the intake runners were modified everything worked well WFO plenty of flow .
But at starting ( kick) R.P.M.
velocity was lost into the combustion chambers and the intake charge didn't stay atomized causing a fuel rich condition that inhibited the proper air / fuel ratio to initiate combustion. Or maybe there was dirt in the mud valve........
Thank you, thank you, thank you.
Adoro tus videos saludos desde mexico 🤠🤠🤠🤠👍👍👍👍👍
That bike is so cool!
I am a very experienced drag racer. Most of my racing has been sportsbikes, and a few street cars before that. The last bike I raced I campained it for six years it was a 2000 busa. If you are looking for a pro piolet to drag race any of your bikes I would be more than happy to offer my skill set to your cause.
Sorry you were doomed to 150,000 (at least!) kicks, but really great to learn about the low speed needle!!
you need to make an electric block u put under the back tire so u can basically push start it on the stand..super easy to build
What a beautiful machine.
That would be awesome to see on a course. With fresh tires.
That is definitely a race bike! Wow!
Great stuff Matt.
YES!!
Awesome , are we gonna see you race this bad dude one day?
En mi familia la hubo,alla por los 40 ,era con sidecar y rueda atras.. 👍🎥
Nice, rockin' that poe-teena!
Hahaha my 74 ironhead with super e on it was so quirky. First kick sometimes as long as it was primed but I’d still adjust for temp. Or…. 15 or so kicks. I know it was all down to the carb adjustments but I’m 62 and just got tired of kicking it. Sold it and bought a heritage springer with EFI. I’d actually dream about it NOT starting.😂