How to change rear shock absorbers DODGE CALIBER TUTORIAL | AUTODOC

How to change / change / install / replacement rear shock absorbers on DODGE CALIBER TUTORIAL | AUTODOC
Top brands that produce shock absorbers: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
On our website you will find a wide range of auto parts you are interested in: goo.gl/3N5Kqs
Shock absorbers: goo.gl/LwmSNC
Shock absorbers for DODGE: goo.gl/js4FN8
Shock absorbers for DODGE CALIBER: goo.gl/LRtp7L
DODGE Car parts: goo.gl/BgWBQV
00:59 - Use an end bit №5 and a combination spanner №15
01:25 - Use a socket №18 and a combination spanner №18
01:48 - Use a socket №13
02:09 - Use a socket №18 and a combination spanner №18
03:27 - Use a socket №10
04:05 - Use a combination spanner №15
04:49 - Using a special tool take out the spring
05:15 - Use an open-end wrench №15 and an ajustable spanner
06:24 - Before installing new shock absorbers it is strongly recommended to pump them over for 3-5 times manually
If you'd like to view the replacement tutorial in text form, please turn on subtitles.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► DODGE CALIBER car repair tutorial | Step-by-step video guide - • DODGE CALIBER car repa...
► How to replace rear shock absorbers DODGE CALIBER TUTORIAL | AUTODOC - • How to change rear sho...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
TH-cam: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...

[@TonyMontana-bm3np]

Stabilizer link nut to lower control arm: 58Nm,
Shock assembly Lower mounting bolt nut: 99Nm,
Shock assembly to the body nuts: 48Nm,
Wheel mounting nuts: 135Nm.
Source: 2007 PM DODGE CALIBER Serwis manual.

[@autodocuk]

Thank you for your valuable clarification, this will be very useful information for our viewers.
AUTODOC

[@bmaiceman]

This was informative. But 1 why did you losten and MOVE the computer. It didn't look as if it was in the way?? And also how do I do this without a big spring press that you used???
My 07 Caliber is making noises in the back and acting like the shocks are bad. So I think i need to do this.

[@autodocuk]

Before changing the shock absorber, check the chassis, it may not be the shock absorber at all. If, after all, the point is in the shock absorber, then you will definitely need a tool to compress the springs, otherwise, you will not be able to reassemble the entire structure of the rear shock absorber.
We moved the control unit so that there was a place for unscrewing the shock absorber support.
AUTODOC

[@mr.nobody9630]

Thanks for the latest video very helpful and fun to watch content.

[@autodocuk]

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@TheGargoylesDen]

A commentary instead of the horrendous music would do wonders for this video? That any he could state the sizes ok f wrenches or sockets used instead of making people continuously stopping the video to zoom in to see what hes doing /using....

[@autodocuk]

Thank you for your feedback ! You will see this information in our new videos. Best regards, Autodoc.

[@seven_art_7]

very helpful... engine rebuild video?

[@autodocuk]

Thank you for the feedback! We are currently working on creating a wider range of tutorials including the one you mentioned. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@nothingfree3524]

If don't have tool to depress spring goat to auto parts store and rent ( auto zoonie ! ) 😀😀

[@kefta4ever219]

Thanks for the informative video, but unless people have a shop, its not that helpful. If you have a shop with all these tools then you probably don't need to watch this video. It does show which bolts to take off though.

[@autodocuk]

Thank you for your feedback! Our video are informative in the sequence of replacement. It is always your right how to replace a car part. In our new videos we will describe and show this replacement in more details. Best regards, Autodoc.

[@cowboyk64]

Arm in the way getting bolts started , Music dont help ....................

[@autodocuk]

Thank you for your feedback! If you don't like the background music,you can turn off the sound on the toolbar. Best regards, Autodoc.