As a pipefitter/plumber, I really do appreciate you insulators. Yall really do a lot of work to cover our pipe, and it makes it look good when done right. Thanks!
As a retired pipecoverer, 40+ yrs, your commet is appreciated. Thank you. If we didn't have cooperation between trades, not much would get done. The people who really build are proud of what we do.
Bro, you just saved all of our asses. They laid off the guy who does this and then expected us to replicate his technique without any education on this technique. The Official Armaflex youtube video was horrible and we watched it a dozen times!! But you saved the day and explained everything very well. Thank you!
Man I love learning new ways to do things it's always cool to see how other people do things. thank for your videos they are out here making guys that good money
Thanks bro I requested this video a while back Thanks man Easy and straight to the point I know it that’s time of your day to make those videos Keep it up bro
Watching again for a refresher very helpful nice video but this is a long radius 90..is it same process for socket or short radius 90s ? Thanks for the vid
Buenos días amigo, un saludo a la distancia, excelente vídeo, justo es lo que estámos haciendo en el trabajo, felicidades de verdad, ánimo y Dios te bendiga.
Hey I’m having trouble in my 2nd year of apprenticeship, was wondering if you can make a video on how to do an eccentric reducer and miters and gores for a tank head. Thank you hope to hear from you!
Great video, little different than how I make them, but I think it’s an easier approach than mine. Would you be able to possibly do a video on how to do the layout for a tank end. Some call them orange peels. Or perhaps a metal Y. Having trouble teaching my crew, thought maybe you might have a better approach. Thanks again for all the videos, great job.
How goes it brotha....I have a suggestion to this.....can you do a layout and cut for a reducing 90 as the LR-90 is in the same avenue.....i like to see how you would do this process....
It's the same layout method. Only difference is you should slide the heel of the 90° to the smaller Dia mark and connect the two. The throat stays the same.
I’ve been trying to cover a 3/4 pvc elbow with foam sheet and the measurements isn’t coming out correct I try to copy the way you’ll in your video …. I need help
With 3/4" pipe you can put it on the straight and twist it over the elbow. The method he is showing really is for pipes over 3". If you need more help, ill refer a few older videos.
I am a mechanical insulator. The basic principle is good, but the gluing is ugly, and the cutting is not perfect. it is not at right angles due to the wrong cut back.For a layman, this is good, but from a professional point of view, it is negligent. Our technical inspector would not accept this. Even if it has the vapor barrier function, it does not meet the aesthetics side...
As a pipefitter/plumber, I really do appreciate you insulators. Yall really do a lot of work to cover our pipe, and it makes it look good when done right. Thanks!
As a retired pipecoverer, 40+ yrs, your commet is appreciated. Thank you. If we didn't have cooperation between trades, not much would get done. The people who really build are proud of what we do.
im a first year instrulator and ive been trying to find s TH-cam acc to help out and i finally found one thank you so much man!
Bro, you just saved all of our asses. They laid off the guy who does this and then expected us to replicate his technique without any education on this technique. The Official Armaflex youtube video was horrible and we watched it a dozen times!! But you saved the day and explained everything very well. Thank you!
I can go to work tomorrow and put a perfect 90 together now. Hopefully I can get a 2.00 raise on my review...😊
We need more layout tricks man BRING EM ON
Master piece 🔥☝🏼 shout out to you from New York, keep it up with great videos , Insulator for life 👍
Man I love learning new ways to do things it's always cool to see how other people do things. thank for your videos they are out here making guys that good money
Best video I’ve for making 90’s from flat sheet armaflex
Thank you, not made one of these patterns in nearly 30 years .
Thanks again 🇬🇧
Gracias por sus clases excelente
Been working with this stuff for about 2 weeks now at a central plant I’m telling you it will test your patience
Nice explanation
Good video
Beautifully done man.
great video ive been insulating 20 years and know one ever showed me this
Exactly how they taught us in class. Great video
Thank you for this approach, brotha it's spot on....I love all the videos that you do....I'm an up an coming Insulator.....
Great way to do the 90. in class they showed us a way different technique in how to do it this seems to have more steps
Just starting this trade. Very impressive video and fitment. Look forward to your other videos. 👍
How would you insulate a wye fitting?
I like this video. thanks
Another well explained video!!! Good job.
Killer work!!!! Thanks for your videos!!!!
I like to use a ceramic knife for the armorflex
Great video
Thanks bro
I requested this video a while back
Thanks man
Easy and straight to the point
I know it that’s time of your day to make those videos
Keep it up bro
Watching again for a refresher very helpful nice video but this is a long radius 90..is it same process for socket or short radius 90s ? Thanks for the vid
Buenos días amigo, un saludo a la distancia, excelente vídeo, justo es lo que estámos haciendo en el trabajo, felicidades de verdad, ánimo y Dios te bendiga.
Just seen you have this version. Cool…
Es algo importante para mi esperare el video con la explicación en español gracias
Thanks brother mann
Thank you sir
Do a video on how to make a reducing circle, like for a compressor on a chiller. Or how to insulate the head of a strainer in armaflex.
Nice
Excelente
Do you know how to bevel the rubber so a seam isn’t visible? A lot of journeyman that I work with do it.
helpful
Would this basically be the same process as laying out for pad/blanket , using K- whool fiberglass insulation
Hey I’m having trouble in my 2nd year of apprenticeship, was wondering if you can make a video on how to do an eccentric reducer and miters and gores for a tank head. Thank you hope to hear from you!
tienes de como aser un 45 asi del mismo material
A great video! However why not just use prefabricated bend insulations? They come in all sizes for most bends out there.
Amigo puedes grabar videos colocando pvc victaulic elvos ?
Great video, little different than how I make them, but I think it’s an easier approach than mine. Would you be able to possibly do a video on how to do the layout for a tank end. Some call them orange peels. Or perhaps a metal Y. Having trouble teaching my crew, thought maybe you might have a better approach. Thanks again for all the videos, great job.
P
Cuando marcaste el 45 enmedio como sacas la mitad
45° wye with fiberglass
Can you explain how a circumference ruler works in one or your videos
You can also lay out the pattern on a piece of scrap cardboard.
Make one for a 45 please
How goes it brotha....I have a suggestion to this.....can you do a layout and cut for a reducing 90 as the LR-90 is in the same avenue.....i like to see how you would do this process....
It's the same layout method. Only difference is you should slide the heel of the 90° to the smaller Dia mark and connect the two. The throat stays the same.
Come back bro I need to learn please bro
형님.. 이건 세계에알려야합니다.한국어번역좀ㅜㅜ..
I want to know how to cut thé 90 dégrée into three pieces
cual es el espesor del armaflex
Please do a lateral 45 pattern in English. I can't find a good one anywhere
Is this process only good for long radius 90s. If so could you demonstrate the process for short radius. Tia
That is a basic 90°, are you looking to do a 45° or smaller pipe? For smaller pipe its a bit different.
@@dineromikeful , for the 45* bend you could use the same pattern as 90* .
Just cut through the 45* line on original pattern.
Come back JPad
You from teaxs ??
I’ve been trying to cover a 3/4 pvc elbow with foam sheet and the measurements isn’t coming out correct I try to copy the way you’ll in your video …. I need help
With 3/4" pipe you can put it on the straight and twist it over the elbow. The method he is showing really is for pipes over 3". If you need more help, ill refer a few older videos.
PUEDES ACER VIDEOS EN ESPAÑOL
POR FAVOR.
Instead of a rubber knife switch to a ceramic knife. You won't have to sharpen it and it will stay sharp and cut clean for years.
tY!! Tengo una pregunta, algún correo que te pueda escribir?
Slow way mate,sorry😉
I am a mechanical insulator. The basic principle is good, but the gluing is ugly, and the cutting is not perfect. it is not at right angles due to the wrong cut back.For a layman, this is good, but from a professional point of view, it is negligent. Our technical inspector would not accept this. Even if it has the vapor barrier function, it does not meet the aesthetics side...