They are little more then boxes for holding the speakers. Which is fine....... As long as you don't throw on a label like "Top-notch stage sound system" It takes a lot more then that to be considered "Top Notch" line array speakers. That requires being paired and tuned to match the frequency range. Without that they are simply a stack of speakers.
Yes they do that some companies give you the specs sound specs which you can't give until the subwoofer and the amplifier are installed and you can get the readings but they give it anyway for the empty cabinet
Proud to here watching From Middle East Saudi Arabia Dammam City between Jubail City Express Highway Service Right Road Way OFW MIGRANTS WORKING ABROAD WORLD WIDE INTERNATIONAL UNIVERSE 11 MILLION Pilipinos....25 December 2020.....merry Christmas and happy New year
Hello so these are trapezoid style speakers aligned like a “line array” speaker system. In actuality they are typical sound system speakers as would be found in any 80’s style sound system. The hi frequency horns are what really defines a line array for coverage and control of the sound
Those boxes won't work as an array source because of the gaps between the HF guides. Doesn't worth it really. Also, I really doubt there were made any calculations during design so you should be lucky enough to hope that it reproduce on the out something compatible to the input.
Nice work and beautiful God bless ur hand work.pls sir can u teach me on line how to make it and the measurements I love ur work I wish I could build for my self
a ơi có đôi vỏ thùng loa a ray bat 30 nào cu không ki niệm vừa bán vừa cho e 1 đối đi nơi thật với là e Theo dõi kênh của a lâu lắm rồi nhưng không có tiền mua
Hope you don’t mind me chipping in because you probably won’t get an answer from the TH-camr. I’m a woodworker and audio person who has been making speakers for 50 years. The answer to your question is not straight forward because it has more to do with other factors such as the enclosure design, the drivers used and the crossovers. They all influence the sound relatively speaking more so than the material used. Back in the day chipboard was commonly used because it was cheap and easy to work with but the cut ends required filling or a veneer. MDF is great but it’s extremely heavy. With P.A speakers 19mm (3/4”) in common because the timber is stable and doesn’t swell like chipboard or MDF if it happens to get wet. All three will work fine with a good enclose design and appropriate bracing etc where required. They are using some type of plywood because it’s best for that application. MDF would weigh a ton.
'Top notch line array'... Without using gaskets, with enormous gap between HF drivers, with selfsecuring bolts that don't even get screwed on far enough, without any cable from flightpoint to drivers to secure them when wood collapses (fire or enclosure failure)...and the list goes on.
LOL! At 1:27 The picture gets very blurred right after he turned on the table saw. It spooked me for a sec. I thought something bad was about to happen.
hola amigo , podrias mostrar las dimenciones de la caja por favor ?????? hello dear , could you show the measurements of the box please ????? greetings from Peru /////
This guy needs his own TH-cam channel and give this back to the real Mr. Electricity. His videos were much more entertaining.
They are little more then boxes for holding the speakers. Which is fine....... As long as you don't throw on a label like "Top-notch stage sound system" It takes a lot more then that to be considered "Top Notch" line array speakers. That requires being paired and tuned to match the frequency range. Without that they are simply a stack of speakers.
Yes they do that some companies give you the specs sound specs which you can't give until the subwoofer and the amplifier are installed and you can get the readings but they give it anyway for the empty cabinet
oh yeah, those slippers in the workplace 😎
Just one word comes to mind Impressed !!
Hi
I miss the old videos of recoiling dead electric motors, soldering electric components, refurbished amplificator etc.
Proud to here watching From Middle East Saudi Arabia Dammam City between Jubail City Express Highway Service Right Road Way OFW MIGRANTS WORKING ABROAD WORLD WIDE INTERNATIONAL UNIVERSE 11 MILLION Pilipinos....25 December 2020.....merry Christmas and happy New year
I'm use
Ppl
Hello so these are trapezoid style speakers aligned like a “line array” speaker system.
In actuality they are typical sound system speakers as would be found in any 80’s style sound system.
The hi frequency horns are what really defines a line array for coverage and control of the sound
Parabéns 👏👏👏👏 excelente trabalho 🇧🇷🇧🇷🇧🇷🇧🇷😎
olha nós aqui........... segue meu instagram @flvsom e ver as minhas caixas.
Big like👍👍 beautiful array speaker system 👍👍💖💖
helper nya hemat biaya... bini sendiri.... good job brother🙏👍👍
Dimensions? Drivers? Thiele-Small parameters? Performance? Specifications? Build technique is superb, I’d like to try these myself.
Those boxes won't work as an array source because of the gaps between the HF guides. Doesn't worth it really. Also, I really doubt there were made any calculations during design so you should be lucky enough to hope that it reproduce on the out something compatible to the input.
Nice work and beautiful God bless ur hand work.pls sir can u teach me on line how to make it and the measurements I love ur work I wish I could build for my self
Nice work and where are you found and how can we get connected, I need those same speakers.
Хочу такие домой, красота, Супер.
a ơi có đôi vỏ thùng loa a ray bat 30 nào cu không ki niệm vừa bán vừa cho e 1 đối đi nơi thật với là e Theo dõi kênh của a lâu lắm rồi nhưng không có tiền mua
Love this design ❤️ can u share it 👍
Greets from Poland
Glad to see Mrs. Electricity gets stuck in too.
मुझे खरीदना है अपना मोबाइल नंबर भेजो
Great quality work keep it up and also make jbl and peavey 3 way speaker
I'm in Ghana and I want to learn how to make line arrays speakers. Please any courses available online
After the paint roller, wat was there sprayed on to get the effect, basecoat or clear paint ?
Great Speaker Boxes... Just one thing... We forgot the speakers..
Nice video where can i get the line array rigging to buy please.
Looks like a speaker sweat shop.
cool, hand made speakers....good jobs.....I like it
SALUDOS, DONDE PUEDO CONSEGUIR ESOS PLANOS...??? GRACIAS
I guess that is why Sonus Faber is very expensive because of the premium build quality.
Sukses selalu dan tetap berkarya👍
Very nice program thanks
I have Cerwin Wega speakers made of chip board very silent and deep bass. I wonder if this hard board speakers will sound better??
Hope you don’t mind me chipping in because you probably won’t get an answer from the TH-camr. I’m a woodworker and audio person who has been making speakers for 50 years. The answer to your question is not straight forward because it has more to do with other factors such as the enclosure design, the drivers used and the crossovers. They all influence the sound relatively speaking more so than the material used. Back in the day chipboard was commonly used because it was cheap and easy to work with but the cut ends required filling or a veneer. MDF is great but it’s extremely heavy. With P.A speakers 19mm (3/4”) in common because the timber is stable and doesn’t swell like chipboard or MDF if it happens to get wet. All three will work fine with a good enclose design and appropriate bracing etc where required. They are using some type of plywood because it’s best for that application. MDF would weigh a ton.
@@grahamserle7930 Wow! That's a tonne of knowledge. Now I do understand why. Thank you so much.
@@EddywaKenya You're very welcome, only too happy to share with others.
Kren buatannya...👍👍
Hi guys!
Could you send me some speaker designs for me to make for myself?
Greetings from Croatia!!
Ps ....... Just keep going !!
Fantastic work. I wish if can have 4 of this here in South Africa
Trop cool
Exelente trabajo los felicito
seems at changsha?
Very good
it's wonderful very good work
can you send line array fitting for cabinet size
can you pls by any chance give the measurements?
'Top notch line array'... Without using gaskets, with enormous gap between HF drivers, with selfsecuring bolts that don't even get screwed on far enough, without any cable from flightpoint to drivers to secure them when wood collapses (fire or enclosure failure)...and the list goes on.
vỏ này cho sound tiếng sao anh thấy cái họng trelll không được như ý
I love these videos. I just wish they had some health and safety laws! Peace.
LOL! At 1:27 The picture gets very blurred right after he turned on the table saw. It spooked me for a sec. I thought something bad was about to happen.
I see a future for you in the pallet industry.
Very information and interesting
Cái này hầu như làm bằng thủ công nên khá vất vả nhiều xưởng lớn nó toàn lập trình trên máy tính song để máy tự cắt rồi công nhân chỉ việc lắp
Excellent work.
Xfa me podría dar lis planos gracias
I love the guy with the stapler and the bedding! where are the speakers?
@Jackie Apreil they too poor to afford speakers were too poor to afford wood, lmao
@Jackie Apreil the world is full of criminals and perverts. protect yo kids from their ideas.
good job
That cluttered wood shop would drive me crazy
do you have plans with BOM for sale?
Bác ở đâu em đặt cặp vỏ array bass 25
Pretty impressive! Thanks for sharing!
What is would like to see are performance characteristics. It is easy to build impressive housings, it is difficult to get performance....
ad cho em xin kích thước của từng tấm để đóng thành 1 chiếc thùng
Great stuff
the best. mr
Cuales son las medidas para hacer esas cajas las podria dar gracias
Beautyful acustic boxes.
MALANG SUMAWE Hadir 👍
Cool stuff. Very skilled woodworking.
Amazing the sound boxes
Very good job especially the counts and the cuts. but the quality of the material is not good at all for this use due to the its mass.
Nice box
*CONGRATULATION* 😎👍
Any calculations for speakers? Or just imagined dimensions? Bad material for boxes.
Saludos, donde puedo conseguir esos planos
Gracias
saya interst dengan design speker pak sederhana bagus>buat education program
Nama besi plat nya apa gan trus belinya di mana ya.. Tolong gan kasih tahu sy tertarik nih
Genius!!!!!
Can i order all the hardware accessories you use this?
Disculpe una pregunta en donde los fabrican
Unas tremendas bellezas, muy lujosas y decorativas.
Mantap boksnya
Good design. Fair enough.
Bạn cho M xin bản vẽ kích thước đc ko bạn ?
This video..you have a sizee plan sir?
super 👌💗💗💗💗
what happened to all the internal wiring ectre.
Nice
The chickens and dogs make their specific sounds in High Fidelity.
8
Bang itu yang dempul hitam pakek dempul apa namanya yaa
Speaker bass nya x pasang ke?
Is that a for a 12” ?
De cuantas pulgadas es el parlante para esa caja
Which paint u using for textur pls tell me
What is the name of the black paint you use that master ,
wooooooooo good
Ye colour konsa hai
Top notch twenty years ago...
hola amigo , podrias mostrar las dimenciones de la caja por favor ?????? hello dear , could you show the measurements of the box please ????? greetings from Peru /////
Totally lost me the moment nails were used to hold the enclosure together!
Yep, screwed again!
@@DoObs I guess if you're going to put some cheap ass subs in their enclosures, you might be okay, but as is, these enclosures are 💩!
Saludos.. se ven perfecto... Que tipo de pintura usaron? Y dónde consigo la medida de la caja?.. porfis necesito información
Capaz que lo protean biene una pintura para pintar chsias de auto
Woh mantep sahabat salam bersahabatan amin
Mamtap salam dari Indonesia
can you sell this ready array housing? if yes, how can i get them in Kenya?
Great work..... How much please???
What ink him use on case?