Eu conheço um menininho...que esperava no portão da empresa... aguardando o Honda passar...e o café com leite (porque esse menininho era esperto...esperava queimar os fuzis dos transformadores em torno da empresa em Valinhos....ele era preciso!) Trocar os fuzis dos transformadores em "torno" (jogo fe palavras) da empresa e apostar no Palmeiras e Santos....
@@BossDad5641 No. I removed it to double check. It was a reman clutch, thought maybe was a defect. Installed a brand new one, same issue. The pedal assembly was previously replaced. I thought maybe there's some adjustments on the crossbar mounting at firewall.
@@BigBirdErnTHC run a ceramic clutch. It's not like the flywheel is going to wear out before the clutch will. And, if you can find a machine shop to do it, you can always have the flywheel turned and ground to resurface it. Organic clutches do not stand up to heat or any kind of abuse in a heavy duty truck at all. They will overheat and crack, or glaze up really bad and sometimes cause horrible clutch shudder upon release when loaded.
Good jb
I would never work on any mechanical project with a ring on my finger.
Eu conheço um menininho...que esperava no portão da empresa... aguardando o Honda passar...e o café com leite (porque esse menininho era esperto...esperava queimar os fuzis dos transformadores em torno da empresa em Valinhos....ele era preciso!) Trocar os fuzis dos transformadores em "torno" (jogo fe palavras) da empresa e apostar no Palmeiras e Santos....
Why manufacture a rigid type clutch plate
How much is the cluch
why strap drive system getting damage
Muy bien
Freightliner m2 with mechanical clutch linkage rod having excessive freeplay on pedal after new clutch install..... .
jesus trevizo hi what was your issue ?
jesus trevizo were the disks installed backwards?
@@BossDad5641 No. I removed it to double check. It was a reman clutch, thought maybe was a defect. Installed a brand new one, same issue. The pedal assembly was previously replaced. I thought maybe there's some adjustments on the crossbar mounting at firewall.
Yes like for mekenis
Mekedo vien ya loistale gracias
after install new clutch , two gears enter into gear at the sam tym. what can be the problem?
shifter tower is not installed correctly the stick is in wrong hole in forks
The shifter needs realigning
On a 10 speed what causes the transmission to pop out of 4th and 9th gears?
Only clutch disk hold the flywheel?
detent balls
syncros worn
Sliding clutches worn inside transmission
Easy clutches are garbage, the pedal is absolutely way to loose.
ceramic will fuck up your flywheel more cost
@@BigBirdErnTHC run a ceramic clutch. It's not like the flywheel is going to wear out before the clutch will. And, if you can find a machine shop to do it, you can always have the flywheel turned and ground to resurface it. Organic clutches do not stand up to heat or any kind of abuse in a heavy duty truck at all. They will overheat and crack, or glaze up really bad and sometimes cause horrible clutch shudder upon release when loaded.
Organic clutches are a thing of the past for heavy duty applications