Most detailed inlay I have ever made with 1743 elements. Home sweet home. CNC Inlay. BroinwooD.
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2022
- Wood: walnut, white oak, maple.
How to find inlay parameters.
broinwood.com/products/how-i-...
Feed rate v bit 30ipm amzn.to/3wf9Txg 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3izKXcF 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
email: broinwood@gmail.com
Drawing by Bohdan,
check out his IG page @petrushko_bohdan
th-cam.com/channels/oSb.html...
/ boordon.design
boordon@gmail.com (if you need a custom illustration, please contact him)
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik. - แนวปฏิบัติและการใช้ชีวิต
![[LIVE] : ONE ลุมพินี 63 | คู่เอก "ยอดภูผา vs โซเนอร์"](http://i.ytimg.com/vi/RGVmBsegKEI/mqdefault.jpg)
How to find inlay parameters.
broinwood.com/products/how-i-am-finding-inlay-parameters
Now THAT looks very interesting! Do you discuss the recommended minimum size of details in the tutorial as well?
Thank you! No, sir, i am not discussing the inlay size in the course. But i do not recommend making an inlay less than 1mm.
@@Broinwood ...and that right there is golden advice. Most excellent, that course goes on the shopping list :) Thank you!
What's with the terrible music. it doesn't fit!
@@jimbob-jn6jz yes
This is a great wood project book th-cam.com/users/postUgkxkPIWb22DigCqxmlXerCyUF4HCl6eSU2L . Most of the projects use the pallet simply as a source of reclaimed wood not as a recognizable pallet so even if you didn't have a pallet you could make these projects with any reclaimed (or even new) wood. The instructions are excellent. The style is charming and would work with lots of different decor. There are quite a number of projects that involve tiling of teh wood pieces which is a really cool idea and can produce beautiful pieces when working with aged wood.
I can only assume an unfathomable amount of time went into this design. The cutting and glue up times must've been extensive too. I've never seen CNC used in this way at that level of detail. I am absolutely blown away by this. The detail is breathtaking. Outstanding work sir.
Thank you so much! It was a very long and complicated project.
@@Broinwood
Кто-то сказал, - деревянных денег не бывает. Помоему ты доказал обратное ю. Точно как на манетном дворе. Очень крапотливая работа ю.
@@AlekseyPurtov спасибо!
With the right software..... V-Carve Pro by Vectrix..... you can do the same. Been doing inlay with V-Carve for almost 10 years now.
A stunning piece of work, would love to know the process of how you translate that to the CNC machine
A good chunk of the praise should also go to the CNC engineers, for creating a machine precise enough to have the accuracy necessary to do this. Plus the software developers. Truly amazing.
I'm out of words. This may be the most skillful use of the CNC I have ever seen in my life. You are great!!!
Inlaying will never be the same not only in woodworking but metal as well. Very good example of what can be accomplished.
Am I the only one that prefers the look of wood unstained.
Do you like dry snatch as well?
I never get bored of watching CNC machines do their thing
Brought to you by Titebond………
Stunning. People who work in CNC know how ‘next level’ this really is. So many things that can go wrong at any step. This is the master.
thank you!
ive never thought much about using a CNC machine to do that. It looks great. I bought a picture thats done with every color wood cut by hand. Cant imagine the time it took the person to do a 24x36 picture, one tiny piece at a time.
Such a beautiful piece of work. Love the detail within this.
Absolutely beautiful. Thanks for sharing 👍
Wow! I just watched this with the owner of the cabin and I can’t wait to see the piece on their at their home. Amazing artistry with the tools of a modern artist.
Thank you so much! 😊
Such a beautiful piece of work. Love the detail within this.. That was incredible to watch, you done a fantastic job!.
Very Impressive and beautiful. I admire the tediousness of the detail and the patience it takes to do that kind of art !
The CNC certainly makes this a lot easier i imagine!
Looks great!
So mesmerizing. Could watch all day. Thanks for showing an amazing piece.
So much detail. This board is amazing!
The amount of time and effort you must have put into not only the design but cutting both the positives and negatives. Amazing work.
Yeah, isnt CNC great. Personally I would be more impressed if it was manually done.
@@GarryOzols Personally I'd be more impressed if you cut into a tree and this was the natural grain design.
That is an incredible piece of art. Thank you for sharing it with us.
As a rookie CNC'r who admires these things in a completely different way than I once did. The hard work was in the hours of design and programming.
The contrasts post finish were stunning. I honestly didn't expect that. Bravo!!!
Having made a fair bit of stuff on a cnc machine myself, (nothing like this quality) I can totally appreciate what it has taken to make this fine piece of art. You would be a tradesman, computer programmer and artist all in one. I wish I had seen this a few years back when I had access to cnc machinery. I love it!
Thank you!
Too me. It's nothing but cut and paste. It's not art to me at all. I saw a guy win Artprize in GR with a pencil, nothing more. That's art.
@@a.barker7792 You do it then. Draw up the design, work out all the toolpaths.
@@johnread7404 why? Did you look a the piece i suggested? im a buyer of wood pieces and folk art. I see to much of it already.
I travel the country looking for unique works. I see thousands of things made with CNC machines. I respect a totem pole carved with a grinder over one cut on a CNC machines.
I agree, It is nice but it's not really a true work of art. it's a machine made picture. Any machine programed to do this can do this. but there are only a FEW people with the skill to do this by hand, which would make it a True work of art.@@a.barker7792
That is the MOST amazing piece of woodworking I have ever seen! Fantastic!
Thank you!
Its fine, but i must assume that you have not seen much woodworking. This is only one example that is much more impressive th-cam.com/video/qPlEr2mtKcA/w-d-xo.html
The real achievement here is your flawless technique; the end result is incidental. Bravo.
Absolutely amazing! WOW!
The most outstanding inlay work I have ever seen! Absolutely fantastic!
Thank you!
Really , you’re admiring a computer . Craftsman used to do that by hand .
@@grahamfarleck6377 Sorry, no hand done inlay work that I have ever seen matches the complexity and fit of this complicated piece.
@@grahamfarleck6377 and...what have you ever done?
Damn that was insane! Absolutely impressive and hands down the most complicated inlay I’ve ever seen someone make! 🤯👏👏
Thank you!
That is absolutely stunning!!
Dude. That is un-freaking-real. Tip of the hat to you bro. Gorgeous and clearly a labor of love. I am sure she loved it!
Охринеть!!! Просто самый настоящий шедевр!!! Такое повторить просто не возможно!! 💪💪👍👍
Это чпу, это можно повторять бесконечно
This was absolutely fantastic!! My only thought was wondering what it would look like with some raised parts, water ripples, pillars, tree bark etc. BLOWN AWAY!!!
Thank you!
inlay
This is insane. Absolutely gorgeous.
I can't believe how great that turned out. Built by a true craftsmen - job well done!
Was there a craftsman in the video? Were they standing behind the big cnc machine that was making the thing?
In one episode can you show the press you used for clamping the plugs into place? Are you just using a bunch of clamps? Either way can you show the process of how your applying pressure and securing the plugs while the glue dries. Thanks and always amazing work.
They definitely use a shop press, probably with steel plates attached. Check out MTMWOOD shop press
Thank you! There is nothing special, just a metal frame and bottle jack. I will show it someday.
Parker..really if your asking that your not even close to doing that detailed work.
1. A some what harden rubber matt. Lay on new glued plugs, then slap a sand bag on top of the rubber. Sand will push harder on any wood plug poping up into the rubber Matt. Let it dry.
Wood glue wouldn't stick to the rubber. If you dony have, a CNC , just use a palm sander, save the dust, if you have to patch. May want to stick to makeing bird houses.
As a woodworker you are a great cnc user
You constantly leave me in awe. Great work is an understatement.
Thank you!
Spectacular!
Wow dude. I really wanna get into cnc carve and this may have sealed the deal. I'm sure with years of practice I might take on something this complex.
That's quality art there bro!
Thank you so much!
This absolutely gorgeous piece of work, the understanding of time involved from drawing to finish, you definitely have inspired me
Thank you!
Great job, CNC!..
Руки золотые это ладно! У кого не бывает! Но вот терпения, это да! Это не одного дня работа! А еще сколько времени необходимо для составления рисунка, программы!
Спасибо!
This is a really impressive level of detail for such a large piece!
I’ve been able to achieve this kind of detail on a coaster, but have failed a few times now on cutting boards half this size - too many gaps!
It must take a lot of pressure to force the pieces in over the whole area - maybe it helps that your boards are generally thicker, because mine start to buckle under the pressure
amazing what a computer and a cnc machines can do now a days. been more impressive if done by hand
@@hazedemotions69 Beautiful work! I'm conflicted though is it beatiful woodworking, or beautiful programming?
@@Joe-nv6ge badass programming skills
@@hazedemotions69 well, if you had tires you could be a bicycle, but you don't.
Stunning!
This simple ballet of man and machine has brought a tear to my eyes, literally. Amazing work.
Thanks! 😊
I'm surprised he couldn't buy a robot to add the glue. Really.
The old Masters did remarkable inlays by hand with out a computerized machine, so ya think ya good, ha.
They still do hand inlay. And it's much more beautiful by like a million times.
What a stupid comment
Very very cool and loads of work but a lil bummed to find that a machine took care of the hard stuff. I've seen very intricate wood inlay mosaics that were all done by hand, now those were a true accomplishment of skill and mastery.
A beautiful, tactile creation ... It must feel wonderfull to lightly run your fingertips over the surface
breathtaking process and endresult, this is so impressive.
Another cool machine i cant afford ☹️
An artist to take something comon like wood and turn it into a masterpiece. A Masterpiece.
Insane! Gorgeous work!
Now..... Do it by hand and I'll be impressed. Nice Work Nonetheless.
CNC gives you talent that you're not born with
He's very talented at putting glue on. :)
Look forward to seeing your attempts 😂
@@nateellis628 I'll just buy one from China.
i believe the drawings are his own design.
and those machines are not as straightforward to use as they appear.
@@garblehose Looks like a scan of a photo, or something that comes with the software.
Beautiful work as always! Great job!
I haven't tried inlays yet but wanna try them soon. But this level of detail is insane and something I'll never even attempt I guess. This must have taken weeks to get this finished. Carving the male and female part, soak it with glue, insert the inlays, let it dry, then carve away the excess, then repeat. Best inlay video I've ever seen.
I'm impressed with the design, artistry and the devotion to detail... I'm not impressed with the skill of the woodworker... The CNC did the work of making it possible... not the carpenter... Yes, I know that there is skill in machining... but it's the CNC's skill, not the carpenters... I also am not impressed with the waste... a lot of good wood was lost by the use of CNC...
I agree. I regret watching this video as opposed to real woodworking craftsmanship. Being good at computers is one thing, being good at woodworking is another. I would not want to own that piece. It is simply too much, and the image is not that good anyways. But a little respect of the skills with the idea of mirroring ant cutting into fewer sections before glueing. Honestly I would say it was put together in 30 pieces.
@@bojensen8051
I'm with you there... I've seen fine inlay work that impressed the hell out of me with both the craftsmanship and art... This isn't it...
You absolutely right; this technique does not require any skills. Press a couple of buttons, and that's it.
Cool story nerd. Let’s see the shit you make and the quality videos to go with it. If you can’t comprehend how much skill went into this, you have no place commenting.
@@blakelocati
The only skill was programming the machine... but not in the craftsmanship... it's the Lego version of woodworking... Don't get me wrong it's a good piece of work... and there is artistry in it, but it's not in any way an example of this person's skill at woodworking... He could put out 50 of them and no one would know the difference...
The subject should be The most complex Inlay I have ever made with my CNC
Yes
The most complex inlay my robot has ever made and I added glue to.
WELL DONE Art-Layout-Fabrication you are to be commended for your work. BRAVO
That’s crazy cool!
Very clever and good work, pity the end product was bland and un-interesting
as beautiful as this is it seems very wasteful unless that sawdust is reused
Nah. That stuff grows on trees...
How about we send all the sawdust to you and you can recycle it.
Are you really saying something that dumb while posting from what is most likely a cell phone?
@@kain9407 - "they dumb" isn't the height of sophistry either...
Stunning!!! What a beautiful work!
What a piece of work !
It's kind of cheating, or just a different way of doing it. I bet a human hand would be more charming to watch and own.
That's nice !
Thanks for posting it.
Simply amazing ! You are soo far at the opposite end of the spectrum that I reside.
IM always amazed watching your videos. You stretch the Envelop every time, always new design concepts, more technical carves, more art & colour from various wood materials. No-one will ever surpass your skill.. you are THE MASTER ...
i appreciate your kind words! I do my best!
Beautiful!
So Beautiful!! Thank you for sharing!!❤❤
This is absolutely the single most amazing woodworking project ive ever seen!!! ive been a hobby carpenter for years and have never seen and inlay even close to that!! wow
Thank you so much!
You act like you didn't just see a robot make the entire thing. Lol.
@@jackfntwist of course a “robot” made it, it’s CNC, that doesn’t mean it’s as simple as saying start. The programming to make this can take hours or days depending on how complicated it is, based on the amount of intricate cuts in this it’s likely took a long time and it’s even more important that both the main section of wood and the inlays fit perfectly again also no easy feat
@@shanemeyer9224 By programming you mean scanning a picture that someone else took, and running a program that someone else "programmed"? Lol
wow!!, awesome!! Congratulations!!
Gorgeous!
That is just plain sick! Wow!
Yet another beautiful job, thank you for sharing.
Thanks!
Outstanding work!
Absolutely stunning!
Incredible. Absolutely stunning.
Unbelievable. Beautiful artwork.
Truly fascinating work. Omg beautiful inlay’s
Absolutely Stunning, very artistic.
Your videos are SO unbelievably inspiring and satisfying!
I am glad you like it! Thank you!
Very beautiful! My respect!
What a piece of Art! Truly amazing work!
Beautiful job. Impressive.
That's amazing!! Creativity to the extreme level!
Wonderful job!!!
Beautiful work, as always the case.
Wow gorgeous
Amazing work!
Wow. Beautiful.
Simply fabulous!
love the work you do
Unreal. Incredible work.
That is AMAZING.
This is amazing artwork
Amazing work just beautiful
Fantastic, absolutely fantastic !!!!
Thank you!
Brother, that is a work of art!
It's a stunning and beautiful piece.
I'd love to see something like this, but with the tree and plant elements stained with a deep muted green, and the water elements a deep, rich, muted blue stain. Subtle, but with those colors I think it would look even more beautiful.
Beyond magnificent!