Good morning Chris!!😀😀 Stainless steel is definitely the way to go when it comes to outdoor furnaces. My Hardy is 100% stainless inside and out. We have been burning it for 24 years without a problem. Take care buddy!!😀😀 Logger Al
I have owned and operated a mechanical company for 35 years specializing in hydronic heating systems. We have installed quite a few of these boilers piped in with a secondary fuel system that automatically switches over. The last one being a gasification unit that is now getting removed. The problem with these units start with heat loss. The heat loss of a unit with 180 degree water inside, a R10 insulation and an outdoor temp of 10 degrees is substantial and is easily figured. The unit there is 200k BTU. That requires that you move 20 GPM at a 20 degree delta T. If you install the unit 100 feet from your building you have a 200 ft pressure drop to contend with plus the pressure drop of the plate exchanger and yes you will need one as these units are open systems. This takes a sizable circulator to move this much water, again heat loss through the piping system is very high. Next problem is going out in pouring rain or 2 feet of snow to load the damn thing, not a fun thing to do. The gasification units require dry wood to operate or they go out especially on warmer days where they start very infrequently. The wet wood thing just allows the BTUs to go out the stack as steam. Another problem is people like to start these things in the summer to heat domestic water or maybe a swimming pool, the problem is in the summer close neighbors have their windows open and will soon complain and you will have to shut your unit down. My advice for people considering one of these is to keep it under roof and preferably in a insulated out building with ample space for your wood. The heat being lost through the jacket will heat the building and dry the wood and because you decreased the delta T there will be less heat loss. Keep the unit as close to the house as possible to reduce circulating heat loss. It is our experience that you will use 2 to 3 times the amount of wood as compared to a couple of modern indoor wood stoves. Although hydronic or hot water heat is a much better and controllable heat when used with radiators or floor heat it only makes up 2% of American systems and this usually means you will install a hot water coil in your furnace to distribute the heat. This is a much better way to burn wood with an endless amount of free feed. You only need to dry your chips so they dont spontaneously ignite which is fairly easy to do. th-cam.com/video/kvRK0lC1UKk/w-d-xo.html
I have one of these for more than 20 years and it's still work like it did when it was new. Just do the required maintenance and it last for a very long time.
Ahh it's so nice to have the equipment and skill to build your own woodboiler if you need to, as long as I'm not selling it to anyone I can do what I want.
It’s simple. The more water in you wood when you burn it, the greater the proportion of the heat energy of the wood that is used to drive off the water when you burn it. The cooler the burn, the less efficient as the VOC’s are driven off as less flammable compounds that reduce the amount of heat produced and line your fire and flue. There is no free lunch. Either you condition you wood properly before you burn it or you will pay the price when you dry it when you burn it.
Burned 200 and 400.. small splits if you even think it's wet.. otherwise conventional and I get to gasifi ( flame cloud in top of the stove ) with 12% white oak. It's all about the operator and 1 1/4 lines. 😉👍
@@InTheWoodyard I have a 1994 200 SS Heatmor but guess what the base was mild steel and rusted out made hot spot and crack stainless tank. This was serious issue when they started making stainless tanks .
Chris...Went to the Suncoast website and the CB is a coal burner. There are only two wood burning boilers (X Series) listed for that manufacturer. Not sure what the constructions differences are, if any. The smallest wood boiler (200 X) heats 5,000 square feet. If you have access to wood at a reasonable cost this is definitely the way to go!
You can burn wood in a coal unit. I believe they had to market as a coal unit for epa requirements. I like the desing due to base gets filled with sand so you get less creosote buildup on bottom from condensation.
The big 30% tax credit helped,now it’s 2000.00 tops.I put in a central boiler three years ago.The last year for the big credit!My boiler is a gasifier,it will burn 100% efficient.
The demand was high for them in 08-12 then the epa stepped in and made them unaffordable that’s why heatmore stopped making them for a several years . Got ours in 08 and it paid for itself in 2 years in what we saved in natural gas.
Bought my Heatmor when I doubled the square feet of my House. One of the deciding features was the fact that it is A " dry" boiler. There is no Physical floor to the unit. The Entire firebox Iis is filled with Sand up to the grates. This Ensures there is no metal bottom to burn out. Ours is Over 20 years old and has Needed a replacement pump. Cost $80. Replaced it myself.
That was a very informative video, Chris. Thank you! One question about burning the same volume of wood either as a round or split into pieces. Wouldn't both the round and the splits need to be at an equal moisture content to produce the same number of BTUs? Your thoughts? Keep up the great work!
I have a non-branded homemade variety wood burner, and I'm looking for details and / or different options on the corrosion protection treatments that are available. Are some of the treatments harder on the pumps? Also, is there a recommended complete drain and refill to change out the water to start over? Thanks!
Good morning Chris, have you seen the top loading wood furnace? Can't remember the name but they are made in Canada . It'll take a 6ft log 🪵 up to 28in width. The top is manually opened or it has a remote control load it with a tractor or skid steer.
It doesn't have to be that size. Just the thought of your wood not being perfect is a time saver. And dealing with tree service wood, it can be any size or shape. Could benefit not having to cut and process as much.
@@aaronjackson5862 I get that it may save time, My question is how much time is wasted burning wood that is not dry thus reducing the amount of potential BTUs therefore having to actually cut and process more wood.🤔
he said its not going to be political but the first third of it was political.. It's not all about you saving money today. It is also important to worry about future generations.. it is a great video.
The demand probably shot up when getting propane even delivered was a chore. I remember even emergency management in Wisconsin was involved so people could find propane. Not sure what year that was.
I wonder how many potential BTUs are lost by using the fire itself to dry the wood versus air drying? coming at it from the fire suppression side there are formulas for figuring out how much water converted to steam expansion rate is required to knock down X size fire, water converted to steam 1700:1 is more efficient at reducing fire temperature vs just water.
It takes 180 BTUs to take 1 pound of water from 32 to 212 it then requires 970 BTUs to take 1 lb of water from 180 to 212 steam. In a normal steam system we collect that steam as condensate and reclaim our 970 BTUs per lb. In a wood boiler it just goes out the stack. If you weigh your wood and do a moisture test you can easily calculate the lbs of water in a given lot. Burning wet wood is a fools errand or an act of desperation.
Oh boy…The wood boiler saga. Heatmor and central boiler were two powerhouses in this space of the conventional owbs for many years. They work yes but are the most inefficient way to burn chunk wood. An indoor old style conventional hot air central heating furnace is more efficient. However there are mfgs out there that knew how to burn chunk wood efficiently in a boiler system for over 40 years. Garn comes to mind🤔😁. The Europeans have known this for 50 years. Glad these US/Canadian Mfgs have adopted the secondary combustion of European design but they are finicky and I’ll die on this hill that thermal storage makes any chunk wood boilers combustion more efficient…Problem I see with these new high efficiency owbs. Garn figured this out 40 years ago.
@@austindenotter19 I agree. Lots of fuel that could be useful. The particulates don’t bother me but what runs hand in hand is the more efficient combustion (i.e. secondary combustion, thermal storage), the more heat is recovered per cord in turn less particulate emissions, less wood, less labor. Less emissions is a positive side effect of more efficient combustion. Think about it…when does a new diesel regen?? Stop/starting/idling? Or when running constant full out?
Yup, nature will always win as far as fuel to burn in the forest if not used...wildfires are a natural and normal way to clean and start over...man is the bump in the road...unless forests are managed.
I don't know if i agree. I'm glad to see this video to hear that Wisconsin does not have the EPA regulations makes more sense now in listening to Chris's previous vids. I would say that boilers are very efficient if you are heating with wood especially the newer ones. My house used to be 80 degrees in the living room by the woodstove and cold in the other end of the house. Now every room is a consistent 68. And there's barely any ash because it burns so completely. Secondary burn boilers are finicky from time to time but manufacturers started using this method because of the phase II regulations and requirements for cleaner emissions. I love our boiler.
My Central Boiler CL6048 has the Duel Fuel prep option. bought in 2007. The second Fuel option goes in through the side. be it Propane, Natural gas, Fuel Oil, Corn/Pellets The Pellet/Corn burner can be had with a Huge hopper than can hold over a months worth of product.
I love my Heatmore!! 15 years now on a 100CS. I have replaced the door gasket, the blower(old one still worked-just to have a spare), and the door hoses. Might get a 200 and heat another house.
It might be a good conversation to have about WHY the EPA are concerned about particulate emissions. I'm in the UK and a year or two back out stove industry had to 'up their game' to design (and test) any new woodstove to conform to the 'EcoDesign' regulations which mean the stove is even more efficient and clean burning than older 'Clean Air Act' DEFRA-approved stoves (of which I have two, made by Clearview). Particulates (smoke) are unburned wood, so they are wasting the fuel you bought/cut-split-stacked and these particulates (PM10 and PM2.5) are damaging to health. In the UK, most particulates come from internal combustion engines, mostly diesel engines, but woodstoves also contribute a lot. So having DEFRA-approved or EcoDesign stoves reduce our impact on the health of our communities, AND save us energy/money etc.
Do they also test the wood the end user is feeding the woodstove? can you only burn dry well seasoned wood or can you feed the stove green wood and still meet emission standards?🤔
@@iffykidmn8170 The local authority is permitted to respond to complaints of smoke emissions and can come and inspect your fuel stores and stove. If you had chipboard or painted wood or damp wood over 20% moisture, they could prosecute you or serve a notice on you to stop creating a statutory nuisance. If you were found to have NOT complied, there could be a fine imposed by courts.
We have one at tree company and burn the wood got a lot of seasoned wood but if splitting in winter time take garbage wood up and burn it had burner 12 years no problem maintenance every 2 weeks clean out heats the shop and office for free no cost for wood burns green are seasoned green on stuff already burning in my case don't have to buy firewood so that is a savings then in summer put a bucket over the smoke stack which is 35 feet tall got a good one when bought it double doors and insulation water heated with antifreeze take care of it it takes care of you like a automobile that's my experience with one 0:00 and they can burn 3 foot peices of firewood fill up set damper and let burn 0:00 0:00 0:00
No, they are available now but depending on what happens regs might get lifted lightened or they might come down like a 10 pound maul on your hand....it could get worse???
Best content in last 3 years. That guy knows his profession. My first thumps up to this channel was given.
Thanks a bunch!
Good morning Chris!!😀😀
Stainless steel is definitely the way to go when it comes to outdoor furnaces. My Hardy is 100% stainless inside and out. We have been burning it for 24 years without a problem.
Take care buddy!!😀😀
Logger Al
Nice stuff! Thanks Al!
I have owned and operated a mechanical company for 35 years specializing in hydronic heating systems. We have installed quite a few of these boilers piped in with a secondary fuel system that automatically switches over. The last one being a gasification unit that is now getting removed. The problem with these units start with heat loss. The heat loss of a unit with 180 degree water inside, a R10 insulation and an outdoor temp of 10 degrees is substantial and is easily figured. The unit there is 200k BTU. That requires that you move 20 GPM at a 20 degree delta T. If you install the unit 100 feet from your building you have a 200 ft pressure drop to contend with plus the pressure drop of the plate exchanger and yes you will need one as these units are open systems. This takes a sizable circulator to move this much water, again heat loss through the piping system is very high. Next problem is going out in pouring rain or 2 feet of snow to load the damn thing, not a fun thing to do. The gasification units require dry wood to operate or they go out especially on warmer days where they start very infrequently. The wet wood thing just allows the BTUs to go out the stack as steam. Another problem is people like to start these things in the summer to heat domestic water or maybe a swimming pool, the problem is in the summer close neighbors have their windows open and will soon complain and you will have to shut your unit down. My advice for people considering one of these is to keep it under roof and preferably in a insulated out building with ample space for your wood. The heat being lost through the jacket will heat the building and dry the wood and because you decreased the delta T there will be less heat loss. Keep the unit as close to the house as possible to reduce circulating heat loss. It is our experience that you will use 2 to 3 times the amount of wood as compared to a couple of modern indoor wood stoves. Although hydronic or hot water heat is a much better and controllable heat when used with radiators or floor heat it only makes up 2% of American systems and this usually means you will install a hot water coil in your furnace to distribute the heat. This is a much better way to burn wood with an endless amount of free feed. You only need to dry your chips so they dont spontaneously ignite which is fairly easy to do. th-cam.com/video/kvRK0lC1UKk/w-d-xo.html
Thanks for the info!
I have one of these for more than 20 years and it's still work like it did when it was new.
Just do the required maintenance and it last for a very long time.
Awesome...good to hear!
Ahh it's so nice to have the equipment and skill to build your own woodboiler if you need to, as long as I'm not selling it to anyone I can do what I want.
okay.
Thanks for this one Chris! Great video today! Always enjoy learning things on your channel!🔥💯👍. We’ll see you tomorrow! Andrew from NB :)
Awesome thank you!
This was great. What a good interview, good work, Chris.
Thanks!
Would love to have a boiler! I think buying from Greg would be the way to go. He has some experience😂Thanks for the info Sir Chriseth👍🏻👍🏻GNI
Thanks for watching! Yup, he really knows his stuff!
It’s simple. The more water in you wood when you burn it, the greater the proportion of the heat energy of the wood that is used to drive off the water when you burn it. The cooler the burn, the less efficient as the VOC’s are driven off as less flammable compounds that reduce the amount of heat produced and line your fire and flue.
There is no free lunch. Either you condition you wood properly before you burn it or you will pay the price when you dry it when you burn it.
Yup! You get it but a lot of others do not...at all.
This was the ones Im leaning towards when I replace mine with a bigger unit.
It's a good one and he knows his stuff for sure.
Burned 200 and 400.. small splits if you even think it's wet.. otherwise conventional and I get to gasifi ( flame cloud in top of the stove ) with 12% white oak. It's all about the operator and 1 1/4 lines. 😉👍
Thanks for sharing!
@@InTheWoodyard I have a 1994 200 SS Heatmor but guess what the base was mild steel and rusted out made hot spot and crack stainless tank. This was serious issue when they started making stainless tanks .
That was super interesting - thanks Chris!
Glad you enjoyed it!
A very nice interview Chris,well appreciated, thanks
Thanks for watching as always!
Chris,another informant video 👍😮😊❤
Glad you enjoyed!
The government should stay out of the heating business
Just like the gas can Business. They can sher mess things up.
The govt is in the anti pollution business .. breathe easier live longer 👍
G’morning Chris. Great info ! Great MN company. Booo to the EPA. Kidding. Nice stuff today.
GoodNightIrene
Good morning!
Always learning here!! Thanks Professor Carlson
Thanks for watching, he knows boilers!
Chris...Went to the Suncoast website and the CB is a coal burner. There are only two wood burning boilers (X Series) listed for that manufacturer. Not sure what the constructions differences are, if any. The smallest wood boiler (200 X) heats 5,000 square feet. If you have access to wood at a reasonable cost this is definitely the way to go!
You can burn wood in a coal unit. I believe they had to market as a coal unit for epa requirements. I like the desing due to base gets filled with sand so you get less creosote buildup on bottom from condensation.
Nice!
The big 30% tax credit helped,now it’s 2000.00 tops.I put in a central boiler three years ago.The last year for the big credit!My boiler is a gasifier,it will burn 100% efficient.
Very nice!
Great video!! Thanks for helping explain the wood boiler to us that don't use them! Stay Hydrated and Have a Safe Day
Thanks for watching!
Thank you for the infos ! Love it
Thanks for watching!
hi there good show . nice unit , best to all john
Hello there Sir John!
Great information. 👍🏻👍🏻👋👋
Glad it was helpful!
The demand was high for them in 08-12 then the epa stepped in and made them unaffordable that’s why heatmore stopped making them for a several years . Got ours in 08 and it paid for itself in 2 years in what we saved in natural gas.
Yup, they are nice units!
Bought my Heatmor when I doubled the square feet of my
House. One of the deciding features was the fact that it is
A " dry" boiler. There is no
Physical floor to the unit. The
Entire firebox Iis is filled with
Sand up to the grates. This
Ensures there is no metal bottom to burn out. Ours is
Over 20 years old and has
Needed a replacement pump.
Cost $80. Replaced it myself.
That is awesome, thanks for the input!
Interesting facts 👍👍👍
Glad you liked it!
That was a very informative video, Chris. Thank you! One question about burning the same volume of wood either as a round or split into pieces. Wouldn't both the round and the splits need to be at an equal moisture content to produce the same number of BTUs? Your thoughts? Keep up the great work!
That is correct. I agree! If the weight of the wood is the same and moisture the same the heat would be the same.
@InTheWoodyard Hi Chris, thank you for your prompt response.
I have a non-branded homemade variety wood burner, and I'm looking for details and / or different options on the corrosion protection treatments that are available. Are some of the treatments harder on the pumps? Also, is there a recommended complete drain and refill to change out the water to start over? Thanks!
I would just contact some manufactures and ask...I don't know ???
Good info!
Glad you think so!
Good morning Chris, have you seen the top loading wood furnace? Can't remember the name but they are made in Canada . It'll take a 6ft log 🪵 up to 28in width. The top is manually opened or it has a remote control load it with a tractor or skid steer.
Yup. I know a guy who has one and I want to do a video in the future with it I hope!
I wonder how many years it would take to dry down a piece of 6'X28" firewood to get down around 21% moisture content. 🤨🤔
It doesn't have to be that size. Just the thought of your wood not being perfect is a time saver. And dealing with tree service wood, it can be any size or shape. Could benefit not having to cut and process as much.
@@aaronjackson5862 I get that it may save time, My question is how much time is wasted burning wood that is not dry thus reducing the amount of potential BTUs therefore having to actually cut and process more wood.🤔
Listen up!
The man speaks the truth.
Yup, he knows his stuff!
You're right, he knows his stuff! GNI
He sure does!
Nice interview Chris. You should put a boiler in your new barnaminion. GNI
I would like that!
Nice Wood Burner😀
Yes they are!
Hey blue shirt guy, they’re doing a video man!! 😂😂😂
Yup, that happens at shows..no worries!
The gubmint so worried about particulates but they are the largest produces of unburned smoke in northern Wisconsin.
Maybe so.
he said its not going to be political but the first third of it was political.. It's not all about you saving money today. It is also important to worry about future generations.. it is a great video.
He just said the facts.
It just goes to show you how crooked the EPA is. It’s wood heat and the government still has to try and control it! It’s BS plain and simple !
Hello and thank you for a great and informative video, this is the future because we must stop using fossil fuels. Best regards, Krister from Sweden.
Fossil fuels made the world what it is today and will continue long after we are gone.... I like ALL fuels.
The demand probably shot up when getting propane even delivered was a chore. I remember even emergency management in Wisconsin was involved so people could find propane. Not sure what year that was.
A lot of people would have them if the gubmint stayed out of the control business.
It was February 2014
Where was the event at?
It will be on tomorrows video.
Greg certainly knows his stuff! Nearly as good as you Chris 😂
Yes he does!
I wonder how many potential BTUs are lost by using the fire itself to dry the wood versus air drying? coming at it from the fire suppression side there are formulas for figuring out how much water converted to steam expansion rate is required to knock down X size fire, water converted to steam 1700:1 is more efficient at reducing fire temperature vs just water.
I have heard anywhere from 25-40% loss ...I am not surprised.
It takes 180 BTUs to take 1 pound of water from 32 to 212 it then requires 970 BTUs to take 1 lb of water from 180 to 212 steam. In a normal steam system we collect that steam as condensate and reclaim our 970 BTUs per lb. In a wood boiler it just goes out the stack. If you weigh your wood and do a moisture test you can easily calculate the lbs of water in a given lot. Burning wet wood is a fools errand or an act of desperation.
Only reason epa stepped in and local cites out a stop on the is because the couldn’t tax them after the sale
That and they want complete control of us!
Hi Chris nice wood boiler love it good video ( Ty Ron Hi Jean have a good day with Wife love you Guys
Thank you Ron running around all over the place visiting places. Give me sister a kiss and a hug!
Thanks!
Good Morning Woodhounds!!(-:
Great info Chris.... Good show!
Morning! Thanks!
Good morning everyone
Hello Stanley!
Good morning all!
Good morning!
How much do these outside burners lose because there outside .
How heat do they lose.
They are about 70% efficient.
30%
Oh boy…The wood boiler saga. Heatmor and central boiler were two powerhouses in this space of the conventional owbs for many years. They work yes but are the most inefficient way to burn chunk wood. An indoor old style conventional hot air central heating furnace is more efficient. However there are mfgs out there that knew how to burn chunk wood efficiently in a boiler system for over 40 years. Garn comes to mind🤔😁. The Europeans have known this for 50 years. Glad these US/Canadian Mfgs have adopted the secondary combustion of European design but they are finicky and I’ll die on this hill that thermal storage makes any chunk wood boilers combustion more efficient…Problem I see with these new high efficiency owbs. Garn figured this out 40 years ago.
We all know that. We have an abundance of wood going to waste. Let it become fuel for wildland fires?
@@austindenotter19 I agree. Lots of fuel that could be useful. The particulates don’t bother me but what runs hand in hand is the more efficient combustion (i.e. secondary combustion, thermal storage), the more heat is recovered per cord in turn less particulate emissions, less wood, less labor. Less emissions is a positive side effect of more efficient combustion. Think about it…when does a new diesel regen?? Stop/starting/idling? Or when running constant full out?
okay
Yup, nature will always win as far as fuel to burn in the forest if not used...wildfires are a natural and normal way to clean and start over...man is the bump in the road...unless forests are managed.
I don't know if i agree. I'm glad to see this video to hear that Wisconsin does not have the EPA regulations makes more sense now in listening to Chris's previous vids. I would say that boilers are very efficient if you are heating with wood especially the newer ones. My house used to be 80 degrees in the living room by the woodstove and cold in the other end of the house. Now every room is a consistent 68. And there's barely any ash because it burns so completely. Secondary burn boilers are finicky from time to time but manufacturers started using this method because of the phase II regulations and requirements for cleaner emissions. I love our boiler.
Would be nice if they would make these that take wood pellets it can load on its own. So we dont have a forest worth a wood taking up so much room.
Design one and be the one to do it.
My Central Boiler CL6048 has the Duel Fuel prep option. bought in 2007.
The second Fuel option goes in through the side. be it Propane, Natural gas, Fuel Oil, Corn/Pellets
The Pellet/Corn burner can be had with a Huge hopper than can hold over a months worth of product.
Morning all
Hello!
I love my Heatmore!! 15 years now on a 100CS. I have replaced the door gasket, the blower(old one still worked-just to have a spare), and the door hoses. Might get a 200 and heat another house.
Nice.
👍👍👍
Thanks!!!
Don't see them on the Westcoast 😮 we have cheap natural gas..😊
That is because they are not allowed buy the gubmint.
Owned an outdoor woodstove for 20 yrs . Dry wood is absolutely better
Yup, some people think green burns better and longer.....they are right on the second one.
Mr. O boogered up everything. I still drive 1999 GMC 2500 HD that gets 11mpg with a 50 mph tailwind in his honor.
Haaa!
It might be a good conversation to have about WHY the EPA are concerned about particulate emissions. I'm in the UK and a year or two back out stove industry had to 'up their game' to design (and test) any new woodstove to conform to the 'EcoDesign' regulations which mean the stove is even more efficient and clean burning than older 'Clean Air Act' DEFRA-approved stoves (of which I have two, made by Clearview). Particulates (smoke) are unburned wood, so they are wasting the fuel you bought/cut-split-stacked and these particulates (PM10 and PM2.5) are damaging to health. In the UK, most particulates come from internal combustion engines, mostly diesel engines, but woodstoves also contribute a lot. So having DEFRA-approved or EcoDesign stoves reduce our impact on the health of our communities, AND save us energy/money etc.
Do they also test the wood the end user is feeding the woodstove? can you only burn dry well seasoned wood or can you feed the stove green wood and still meet emission standards?🤔
@@iffykidmn8170 The local authority is permitted to respond to complaints of smoke emissions and can come and inspect your fuel stores and stove. If you had chipboard or painted wood or damp wood over 20% moisture, they could prosecute you or serve a notice on you to stop creating a statutory nuisance. If you were found to have NOT complied, there could be a fine imposed by courts.
I am all for efficiency and clean air but the mandates will and are designed to end them and all burning ...eventually.
Sounds very scary and ominous.
We have one at tree company and burn the wood got a lot of seasoned wood but if splitting in winter time take garbage wood up and burn it had burner 12 years no problem maintenance every 2 weeks clean out heats the shop and office for free no cost for wood burns green are seasoned green on stuff already burning in my case don't have to buy firewood so that is a savings then in summer put a bucket over the smoke stack which is 35 feet tall got a good one when bought it double doors and insulation water heated with antifreeze take care of it it takes care of you like a automobile that's my experience with one 0:00 and they can burn 3 foot peices of firewood fill up set damper and let burn 0:00 0:00 0:00
Basically, wait until after the election before buying a boiler😂
No, they are available now but depending on what happens regs might get lifted lightened or they might come down like a 10 pound maul on your hand....it could get worse???
There are no broilers here in Washington state, but it's neat to learn something new.
Woodstoves are most common here with some fireplaces 😉👍
Yup, they are not allowed because they work and the government wants control.
if you can't satisfy the epa then design something that will.We all want clean air and water.
Yes.... but they WANT them and all wood burning gone and they are killing the industry one cut at a time.
Can't have anything nice with the government involved.
Yup, they ruin everything they touch.
Politics do effect every industry and way of life! Less government vote Trump 2024
Everything effects everything!
That’s right. Trump. The only president with common sense 👍🏻👍🏻🇺🇸
okay
EPA = "Environmental Pest Agency"!
okay