Huawei Gpon Olt Vlan Port Link-aggregation Configuration | Technical Hakim

Huawei SmartAX MA5683T GPON OLT VLAN PORT Link-Aggregation Configuration | Technical Hakim.
0:45 Adding/Creating Vlans in OLT
1:45 Tagging created Vlans to specific ports in OLT
2:24 Adding/Configuring/Creating LACP Link-Aggregation in OLT
3:18 Adding/Bundling multiple Port-Links to single Link-Aggregation LACP members in OLT.
Huawei MA5683T is an aggregation Optical Line Terminal (OLT), it supports up to 6 service slots and can support a maximum of 12,000 subscribers (GPON). MA5683T has GICF/X2CS Uplink Board available for selection, and two power slot redundancy for DC power input.
Configuring Huawei Ma5683t Gpon Olt For Vlan & Link Aggregation.
Here's How To Set Up Your Huawei Smartax Ma5683t For Optimal Gpon And Vlan creation, Link-Aggregation configuration, and tagging VLANs to ports.
In This Video, We'll Be Setting Up Our Huawei Smartax Ma5683t Gpon Olt For Vlan And Link and we will get to know How To Configure A Huawei Smartax Ma5683t Gpon Olt For Vlans And Link Aggregation.
Huawei Smartax Ma5683t Gpon Olt Configuration For Vlan Port Link-aggregation | Technical Hakim.
Configuring link aggregation on Huawei SmartAX MA5600,
Configuring Huawei SmartAX MA5683T.
Know How to Configure Huawei MA5683.
Huawei SmartAX MA5683T GPON OLT VLAN, PORT, Link-Aggregation Configuration | ‪@TechnicalHakim‬
#OLT #huaweiolt #huawei #technicalhakim Huawei OLT terminal MA5683T with GPON board GPFD (16x SFP C+ included) 10G uplink (X2CS) DC power supply.
Huawei OLT terminal MA5683T,
Huawei ma5608t, huawei smartax ma5683t, Technical Hakim, Tech Videos, Networking, Computer Networks, Information Technology, Huawei SmartAX MA5683T GPON OLT Configuration, Huawei SmartAX MA5683T GPON OLT VLAN PORT Link-Aggregation Configuration | Technical Hakim, Huawei MA5683T, Huawei OLT terminal MA5683T, Huawei olt, Huawei olt configuration, OLT configuration, GPON OLT, Gpon OLT configuration, Huawei ma5608t,huawei smartax ma5683t, Huawei, Huawei switch configuration, Vlan creation in OLT, how to add vlan in olt, Link-Aggregation Configuration in Huawei OLT. OLT configuration steps.
#technicalhakim #huawei #huaweiolt #oltconfiguration #ftth #gpon #olt #huaweioltconfigurations
Basic OLT configuration step by step,
Huawei SmartAX MA5608T Configuration & Commissioning,
Huawei GPON OLT Configuration by Command Line,
Huawei GPON OLT Configuration,
Performing the OLT Basic Configuration,
steps for configuring a Huawei OLT.
technicalhakim.blogspot.com/
technicalhakim.com
Thank You.

[@RicardodosSantosSilva]

Hello, thanks for the content. I did this link-aggregation between my olt M5600T and my Huawei S5720 switch, but the traffic is not balanced. One port is for upload and the other for download. How do I make the traffic balanced?

[@TechnicalHakim]

thanks for your feedback.
Procedure: please once try this on your switch configuration:
Configure a common load balancing mode::
Run *system-view*
The system view is displayed.
Run *interface eth-trunk trunk-id*
The Eth-Trunk interface view is displayed.
Run *load-balance { dst-ip | dst-mac | src-ip | src-mac | src-dst-ip | src-dst-mac }*
A load balancing mode is configured for the Eth-Trunk interface.
By default, the switch load balances packets based on *src-dst-ip* .
please refer to this hope it will hep you: support.huawei.com/enterprise/en/doc/EDOC1100127054/a0cf89/optional-configuring-a-load-balancing-mode