TESTED!! Furitek 1/10 Brushless Outrunner RC Crawler Motor & ESC (Python X and Komodo Ten)

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 87

  • @chrishuelsman952
    @chrishuelsman952 ปีที่แล้ว +6

    The hexfly servo is capable of 8.4v producing 42kg, according to Redcat.

  • @AdventureTimeRC
    @AdventureTimeRC ปีที่แล้ว +1

    Looks super smooth nice upgrade

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว +1

      Thanks 👍 The system really does work very well!

  • @christophermears7738
    @christophermears7738 ปีที่แล้ว +1

    Furitek is awesome stuff.. they also have a in-runner motor and python x ESC 4s water resistant set up as well. I run a lizard 10 ESC in my vanquish Phoenix and love that thing.

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Nice! Thanks for the feedback!

  • @Island-RC
    @Island-RC 9 หลายเดือนก่อน

    My esc died a month ago on mine. Still waiting for a warranty one to ship. Motor is still working well on my rino and cralwmaster escs

    • @RoadsideRC
      @RoadsideRC  9 หลายเดือนก่อน

      Interesting! What happened to the ESC?

    • @Island-RC
      @Island-RC 9 หลายเดือนก่อน

      @@RoadsideRC was driving out of trail on 3 s 2000kv app open temps low and it just about flipped forward power cut so fast. 3/10 sold through my local hobby shop have died. I can still steer and no magic smoke.
      The other 2 guys has lots of magic smoke. Furiteck says mine is a blown cap but I'm not sure which one

  • @adamhudson6812
    @adamhudson6812 ปีที่แล้ว

    I actually was hoping you were going to post about the furitek setup as I got one but was holding off until I get the DSM chassis. Thank you!

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Glad to help!
      I have the DSM chassis on order. Hope it ships soon!

  • @addamsegal
    @addamsegal ปีที่แล้ว

    Furitek is awesome. Their esc's have great tunability. I'm running Furitek combo's in 4 different trucks. Once you try one you won't want to use anything else.

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Which of their combos is your favorite?

    • @addamsegal
      @addamsegal ปีที่แล้ว +1

      @@RoadsideRC it's hard to say my favorite. I really like that we can run an outrunner now without all the high pitch whining. I like that you can adjust the throttle curve in the ESC too. Everything can be tuned to your liking. The only downside is none of the ESC' s I have are even water resistant. I thought about using some conformal coating on them. I have 2 truck running Komodo 10 2500kv with the older Lizard 10 esc's and they run great. I also have a couple SCX24's. One is running the Komodo mini with the Lizard pro ESC and the other is running a micro Komodo and the Tegu pro ESC. They run very good too.

  • @GianfrancoSarno
    @GianfrancoSarno 9 หลายเดือนก่อน

    HI Troy, last week I received my ascent and I would like to change the original esc and motor with the furitek combo show in this video; this combo work with the S3 or S4 battery ?
    thanks

    • @RoadsideRC
      @RoadsideRC  9 หลายเดือนก่อน

      It will work with either of those - however I think it works really well on 3S.

  • @archerash6695
    @archerash6695 9 หลายเดือนก่อน

    You can switch forward and reverse on the app also

    • @RoadsideRC
      @RoadsideRC  9 หลายเดือนก่อน

      Good point!

  • @charlieshankles
    @charlieshankles ปีที่แล้ว

    I have been curious about this system i too am a hobbywing fan boy but have been wanting a revolver to try out. Thanks for the demo

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Yes! My thought exactly. Love the Hobbywing stuff...but wanted to try an outrunner - and this is a super easy way to do it.

  • @archerash6695
    @archerash6695 9 หลายเดือนก่อน

    How many plug ins for channels?
    Thats the big question.. no light options, no winch..
    I have the komodo in my fcx lc80. It works great but no options for plug ins
    Or.. am I wrong and it there another way to have those options?

    • @RoadsideRC
      @RoadsideRC  9 หลายเดือนก่อน

      Those options are all through the receiver - not through the ESC.

  • @snakehips12345
    @snakehips12345 ปีที่แล้ว

    Hey Troy did you paint the bottom of the Ascent body black? It looks really good!!!

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว +1

      That is a simple strip of vinyl! I thought it might make the body look shorter.
      Thank you!

  • @BeardRubEnjoyer
    @BeardRubEnjoyer ปีที่แล้ว

    I didn't even know Furitek made 10th scale stuff. Love their ESC in my 24th scale stuff.

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      It is really good! I am happy with it.

  • @stlrider4714
    @stlrider4714 ปีที่แล้ว

    Curious if you're still running this combo? I've heard a lot of issues with the ESC popping? Any updates on this combo?

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว +1

      Running strong! Have had zero issues.

  • @wolfpackrc
    @wolfpackrc 5 หลายเดือนก่อน

    Didn't look like it crawls slower than the fusion. I'm wanting something for my gmade r1. Not enough room for a fusion. Was thinking outrunner but now i don't know.

    • @RoadsideRC
      @RoadsideRC  5 หลายเดือนก่อน +1

      Perhaps the video just didn't show it enough. Outrunner motors set the bar for slow crawl. The system would do great in that R1.

  • @FPVDiverBomber
    @FPVDiverBomber 10 หลายเดือนก่อน

    Is it a better choice than a fusion pro 2300? For my RTR Phoenix?

    • @RoadsideRC
      @RoadsideRC  10 หลายเดือนก่อน +1

      Depends on if you want the waterproofing or not. This is NOT waterproof.

  • @marklarsen-ne2ws
    @marklarsen-ne2ws 2 หลายเดือนก่อน

    How you think this system would work in redcat gen9

    • @RoadsideRC
      @RoadsideRC  2 หลายเดือนก่อน +1

      I expect it would do quite well.

  • @Teddybearsandkittys
    @Teddybearsandkittys 3 หลายเดือนก่อน

    How's the system holding up? Considering getting one but heard some bad things

    • @RoadsideRC
      @RoadsideRC  3 หลายเดือนก่อน +1

      So far, so good!

    • @Teddybearsandkittys
      @Teddybearsandkittys 3 หลายเดือนก่อน

      @@RoadsideRC sweet! Thank ya 💪

  • @kirbyjeffery4773
    @kirbyjeffery4773 ปีที่แล้ว

    I think it's worth it for the control !! As always great video !!!!

  • @josephlawrence6873
    @josephlawrence6873 ปีที่แล้ว

    I like the wheels and tires on this rig who makes them?

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      The tires are the factory tires. The wheels are these: amzn.to/3GszlGK
      Just in gold, when they are in stock.

  • @fredvancuren7611
    @fredvancuren7611 ปีที่แล้ว

    😮 need more info please about the crawler , motor , and the esc please

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      What would you like to know?

    • @fredvancuren7611
      @fredvancuren7611 ปีที่แล้ว

      @@RoadsideRC I would like to know if esc would work on any system with four well drive that is axle shaft driven, I would think about the this truck as well .

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      @@fredvancuren7611 This ESC and motor combo will work great in any 1:10 RC crawler.

  • @markcole6475
    @markcole6475 ปีที่แล้ว

    Gonna start using these types of ESCs…..space on some of these rigs is getting limited ….
    Nice upgrades on the Ascent! I noticed it doesn’t have much articulation like they all do …or don’t 😊
    I’ve seen a couple guys pull the inner spring out and it helps a bunch….FYI

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว +1

      Yes! I have not started messing with the suspension a lot on this truck yet. If I am honest - I just keep watching it while driving...and haven't really seen a need to modify the suspension based on performance. It keep driving over things - so I leave it alone!

  • @idealautofactory
    @idealautofactory ปีที่แล้ว

    12:08 Insane!!!

  • @idealautofactory
    @idealautofactory ปีที่แล้ว

    That small motor is better than the old one? Wow!!

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว +2

      The outrunner style produces a BUNCH of torque and great low-speed control.
      The downsides: usually noisy, not waterproof, careful selection of KV is key or it will be slower.

    • @idealautofactory
      @idealautofactory ปีที่แล้ว

      @@RoadsideRC thanks for the pros and cons.

  • @michaelchoate2810
    @michaelchoate2810 ปีที่แล้ว

    I'll be doing the dsm chassis on my ascent simply because I don't like the stock motor mount system but that dsm fixes the design imo

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      I have one coming - interested to see how it does!

  • @PhilMillerJustice
    @PhilMillerJustice ปีที่แล้ว

    Thanks Troy!

  • @Jerroldbubbataylor
    @Jerroldbubbataylor ปีที่แล้ว

    Great vid got to get me some Furitek

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Thanks! It is a nice setup!

  • @idealautofactory
    @idealautofactory ปีที่แล้ว

    That esc is slim. I like the simple flat design

  • @thomasblair7996
    @thomasblair7996 ปีที่แล้ว

    great review,i love there systems in my trx4m trucks,so controllable on the fly,i have been debating trying one in a 10th scale,now i guess ill have too,thanks for the info and see you on the next one

  • @Griller1977
    @Griller1977 ปีที่แล้ว

    I feel like you missed the chance to point out that the Python X and both of the motors Furitek is pairing with it are capable of 4s, where the Fusion SE and Pro are only rated for 3s. ExocagedRC put the Python X and furitek inrunner combo in his Ascent and that thing on 4s is probably the closest you're going to get to a rock crawler that can race too 😂
    Oh, also the fact that the Python X is brushed capable as well, you just have to change settings in the Furicar app. If it's anything like their 24th scale ESC it will kill on a brushed motor.

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Good adds! Thank you!

  • @arthopfer
    @arthopfer ปีที่แล้ว

    Not sure why but I want to try an outrunner in a rwd drift car.

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Hmmm.... That is a fun idea! If you could get one with high enough KV, that would work great.

    • @arthopfer
      @arthopfer ปีที่แล้ว

      @@RoadsideRC I just think it would look cool spinning inside the body

  • @fredvancuren7611
    @fredvancuren7611 ปีที่แล้ว

    Thank you

  • @paullayer4152
    @paullayer4152 ปีที่แล้ว

    Furitek is s the bomb!!

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      It certainly did great in this test!

    • @paullayer4152
      @paullayer4152 ปีที่แล้ว

      @@RoadsideRC I really dig your channel! Any chance you could test some different 3d printed tire inserts?

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      @@paullayer4152 I really want to! There are a lot on the market, and they are NOT cheap. I don't even know where to start!

    • @paullayer4152
      @paullayer4152 ปีที่แล้ว

      There are some interesting looking designs on cults3d in a verity of sizes thanks for the reply I really like your channel keep up the great work!!

  • @Casitascrawlers
    @Casitascrawlers ปีที่แล้ว +1

    It’s good but nothing beats a Fusion.

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      They are good systems!

  • @billyb5057
    @billyb5057 ปีที่แล้ว

    good review and setup on test it looked pretty good the software seemed to provide much options
    *🥸full view always 💯👀Au 👍thumbs up👍have a good week🎅*

  • @ericsmith3317
    @ericsmith3317 ปีที่แล้ว

    Only improvement u could make to that setup is swap the outrunner for the perentie 1950kv inrunner... I know.. I know.. just trust me ! You'll thank me later !

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Interesting! I'm curious why you say that - can you tell me more?

  • @dirtrider88
    @dirtrider88 ปีที่แล้ว

    you know you can record the screen of your phone so we can actually see what your doing and talking about

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Thanks for the feedback.

  • @TheLilhulk1111
    @TheLilhulk1111 ปีที่แล้ว

    The only review on Amazon says that motor sucks

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      Glad to provide a different perspective!

  • @jimiwith2eyes
    @jimiwith2eyes ปีที่แล้ว

    So you pay twice the price of a Hobbywing for a squealing esc motor combo that you need a smart phone to use? I don't have a smart phone but I have plenty of program cards so I'll be passing on the over priced squealing Furitek 💥

    • @andrewhead4365
      @andrewhead4365 ปีที่แล้ว

      Thankful for this video because I have Hobbywing Fusion Pros and SEs in all my crawlers and was thinking of trying one of these systems just to be different. Doesn’t look nearly as smooth as the Hobbywing and can’t take the whining noise. Only upside I see is being able to make changes via Bluetooth and not needing to hook up program card. Not really a big deal though because once all the settings are where I like them, I never really have to adjust again

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว

      I am a big Hobbywing fan, for sure. It is great to have options. I have put the Fusion in so many builds, that I wanted to try something different. There are folks that really like the outrunner torque and super-low weight. That is something that Hobbywing doesn't offer...and I am not sure why.

    • @RoadsideRC
      @RoadsideRC  ปีที่แล้ว +1

      That is why I do this! Glad the video helped you.