You're seriously my inspiration, I've never seen someone so patient like you with all this work. Your enthusiasm really makes me happy, I don't know why lol. Btw when are you saving up for new rims?
I wish I knew as much as you, I need to do the timing belt on my lancer but I don't even know how you did it even after watching this vid. You pulled off so much stuff! :/
Yes, it is different on the Lancer. This is a 1.5 engine, the Lancer got a 2.0 engine. so yea Hopefully I will get to change the Timing belt on a Lancer. ps. If I were you, and with no tools/equipments, I would not attempt to change it cheers
O lol but yes the reluctor blades are located behind your camshaft sprocket the 2 brass lookin blades. on the right of the sprocket the a sensor that's the cps when the car is crank the blades spin and go thru the cps which tells the car ok we are TDC go and ahead and fire up. If the cps is faulty you will get no spark so doesn't matter how many times the timing is set also you did a great job putting everything together before cranking because the hermonic balancer or crankshaft pulley has to be on for the blades to position correctly or the blades could hit the cps and your car with be without fire. I'm so used to setting timing to my eclipse. I usually set timing turn it over if it fires up put everything together you're done if not go back and try again the mirage is a different when. It comes to the timing
Just curious why didn't you align the crank to top dead center? I am just worried that the pulley might could have jumped while you were taking the old belt out. I'm still new to changing timing belt, but your opinion would help my mind clear. Thank YOU! more power to your channel.
Hi, Thanks for this very useful video. I have a water pump question. Is it really necessary to replace the water pump? The one you removed looked absolutely fine. I am changing all belts including the timing belt on 2000 model Lancer with a 4G15 engine with 100,000 km on the odo and I am being advised to not change the water pump as it’s the original Japanese part and they last a long time. What is your view?
Just a note of wisdom for you on a timing belt replacement.If you have not done this yet,it is smart to change the camshaft oil seal and crankshaft flywheel oil seal when you are already there with the parts exposed than to do the oil seal change later down the road when they leak oil.
Awesome videos man I have a 2door 1.5 mirage stick shift do you have any idea where I can add transmission fluid at? I changed my clutch and could never find where to add transmission fluid, and just a question I thought your not suppose to tighten the harmonic balancer bolt with a impact?
penguino1283 It is fine for this car to impact it, no big deal, it works fine. For the transmission fluid for manual car, it is tricky. I would take it to the shop and have it changed there. cheers
I just had this job done by a garage and I'm afraid they might not of put in the new water pump, along with the new timing belt as I bought and supplied the new parts. Can I get that plastic timing belt cover off easily without taking off other stuff like the power steering pump?
Hi man, I am thinking of getting 4g15 DOHC 16V, instead of my current SOHC 8V, do you think it is a good idea?, I read some articles on it, but I am not sure if it will make much difference for me, please let me know if you have any comments. thank you :)
muy buen video amigo le pregunto si a la hora de cambiar la correa del tiempo cuando se saque la correa se corren los puntos no importa solo se llevaria al lugar que es y ya estaria en tiempo
Drew Cobain If you're gonna replace water pump, you should replace all the belts too. Yes, it is easy to replace the pump. Just make sure to clean the surface good and I only use the gasket, and I use some grease just to make sure it stays inplace when I put the pump back in. If you also wanna use sealant that is made for water pump along with the gasket, it would be ok too.
I'm watching your video to understand how I ensure I got the timing right. I'm replacing the timing belt on a 91 Lancer. Why is it important to mark the belt and the sprockets, shouldn't it be enough for the camshaft and crankshaft sprockets to align with their respective marks on the engine block? Thanks for your videos.
@user-zf4uz3hy8z It is already enough for the sprockets to align with their marks. I just don't bother to adjust the sprockets to align with their marks, just paint and done.
@@DarkDragonWing I see! It's good to have that as a back-up. I'll make sure to make those marks, to fall back on just in case I move the camshaft when I impact it. I've been replacing silent blocks and bushings in the front suspension (it drives so nice now), and a few other bits and bobs that keep me busy, but I'm about to dive into this part soon.
Bossing Maggie can you do sometime a fixing a lancer at least late model 94 to 96 model and with the motor 4g92 and I follow every video that you are sharing .... More power ...
Great videos. I have the 4g15 engine in a Proton Jumbuck from Malaysia. The car is a right hand drive for Australia. Would it be the same to change the timing belt and water pump on? Regards Russell.
Excelentes tus trabajos de mecanica en general y la manutención de tú auto,felicitaciones por favor haz referencia a la manutención de los frenos como se debe hacer paso a paso gracias. Desde Lisboa te saludos.
hi ! thanx again for your videos last time that i asked something was the trouble that i was having with the poor horse power and too much fuel consumed in my lancer and checking out i discovered that the problem was one ignition coil wich i already ordered . see the first vidio was to change both lower arms, second was to change front and rear struts and now i'm about to replace the water pump and there comes the question what i'm watching is that you are replacing the water pump on a mirage it is the same water pump for 2003 lancer es ? do you have a brand name wich fits better on my lancer???? thanx
+isamel valens Hi. Oh I think your 2003 Lancer ES has a 2.0L engine. You can watch this video for reference: th-cam.com/video/T__PVmqXf6g/w-d-xo.html If you are gonna replace the water pump, you should replace the belts too. Here is a complete set: www.ebay.com/itm/Mitsubishi-Lancer-02-07-2-0L-SOHC-Timing-Belt-Tensioner-Seals-Water-Pump-Kit-/360852687802?fits=Year%3A2003|Model%3ALancer|Submodel%3AES&hash=item54047f0bba&vxp=mtr
Great video, but I think theres an error on how you have done the timing belt, the belt can go on anyway there was no need to mark it you should of marked the camshaft sprocket against the engine as a set point, if the sprocket moved the valves will be out of position resulting in the engine damage you mentioned earlier on of the video.
I agree with you, also there is already marks on the cam shaft and the head for timing and on the crank shaft and block. Great job but you never know the belt could've slipped and doing it that way would of changed nothing.
Hey mackey. I got my mirage leak. There is water underneat the passanger seat. Do u think it's because the a/c or water pump? I got my check engine on too. Maybe timing belt? It making click sound when i start the engine. Thanks
Kenick Willie If the water is green ,then it's the water pump. Check engine can be checked with this tool: www.amazon.com/Autel-MaxiScan-MS310-Diagnostic-Vehicles/dp/B005KOZ25Y/ref=cm_cr_pr_product_top?ie=UTF8
Thanks mackey. Anw. Can u help me with kind of part that i should choose on ebay? Its pretty confusing. I have 2001 mitsubishi mirage 1.8l es. And i want to change exactly the same part as urs. Cus, i believe the last owner never do anything with it
Kenick Willie You want to change the timing belt, other belts, and water pump on your 1.8l? Here buy this kit (you might not use everything in the kit, but it is a good deal): www.ebay.com/itm/Timing-Belt-Water-Pump-tensioner-GASKETS-Kit-Mitsubishi-Mirage-1997-2002-1-8L-/360792603162?fits=Model%3AMirage|Engine+-+Liter_Display%3A1.8L&hash=item5400ea3a1a&vxp=mtr Here are the videos that will help you: th-cam.com/video/T__PVmqXf6g/w-d-xo.html th-cam.com/video/IBaVA4Xh8-g/w-d-xo.html
Awesome video Man U have some serious editing skills n lots of patience however u might wanna be more careful about using loose clothes when working on moving parts trust me working on the oil field l have seen some serious accidents tha could have very easily been avoided by wearing the proper PPE Thanks a lot n regards from South Texas
hi I'm planning on changing the timing belt on my car and I have a ?. before I go on first I want to say thanks for all the great videos I've learned a lot from you and I didn't know nothing at all about cars now I'm not scared to do things on my own car so thanks a lot .so now for the ? when you do those marks with the white paint what exactly are you marking I want to know what exactly to mark because I've read that if you don't put the timing belt on correctly you can mess up the whole timing and the engine and be very sorry and of course I don't want that so can you explain it more to me and let me know exactly what to mark. thanks again
Nava Rodriguez Thanks! At 5:59 I marked the timing belt and the pulleys. Then I take the timing belt off. At 8:41 I matched the new timing belt to the old timing belt and marked the new timing accordingly. Finally, I put the new timing belt on by matching the marks on the pulleys. Cheers
Hi, I just complted the same work on my Mirage but it now hesitates to accelerate when the A/C is on. You made it look simple but it's quite a job. Did you reinstall the bottom half of the timing cover? Thanks for the vids!
Thanks. I also saw your vids on how to change the O2 sensors and you also cleaned the maf sensor. Thanks for the advise and please post more videos with the Mirage or Lancer.
A 4 Cylinder like this will struggle a little when the A/C is on. When the compressor kicks in on my Lancer, it's almost like hitting a brick wall lol. Nonetheless, if it's seriously down on power after changing your timing belt, you may have left it a tooth off.
Just out of curiosity how long did it take you to replace the water pump? I am about to get a Mirage and it needs a new water pump and i am wondering about how long I can expect to be working on removing the old pump and replacing it with a new one?
If you are going to replace the water pump, you should also replace the timing belt. It should take a bout 6 hours or more. I would suggest start in the early morning so that you have the whole day to figure things out when you need to buy tools or parts. cheers
importworx Haha Yes, I watched and commented on your video before I started this timing belt project. I believe yours is for the 1.8L, this one is 1.5L, but I got the idea of the steps. Thanks to you. cheers!
Hmm, do you see any leaks? If not, then you might need a new pump. I think because the water is not moving so it got hot and boiled. OR.. worst case would be that the coolant leaks into the cylinders and burn out that way. Just what I think. cheers
Well today I found that some pipe line below the throttle body has a pine hole and water comes out through there , but also I think there might be another one because more water come out from below and it is not from where the water pump is ...
Hello I Have A question For You, is the big pulley belt markings different from the Timing belt markings ..? How do you get the accuracy of you have missed the markings Also how do you get the distributor to line with the timing belt What are the signs to look out if they align.. Again, thank you for this awesome video, I have learnt a lot
hi there. im a big fan. I have a 97 mirage LS coupe 2 door stick shift. I haf into an accident couple of months ago and I just wanted to know wher can I buy the front bumper nd hood of my car. i tried looking up online nd local crazy race. and I got a parts same as your car. in wont fit perfectly cuz its long.
How can I send you a video showing a problem I have with my Mirage 2001? When I start the engine and I retired the terminal cable of the battery, the car try to turn off or run in low charge, the pannel lights, radio, and external lights slowly gets low and low like is loosing power. I dont know if is a Relay, electrical cables, computer or is out of time.
DarkDragonWing I bought it, along with a new battery. When I turn on the car and the battery terminal is removed, the panel light turns off, the panel's backlights start to blink, the radio stops ringing and starts blinking as well. only when I accelerate, it stabilizes but once I stop accelerating it after several seconds the radio stops playing music and next to the panel they continue blinking. I have a video, could I send it to an email?
Hey, I own a mirage 2000 coupe too and my power steering just broke right now. As much as I would like to repair it myself, I don´t know anything about mechanics. About how much is the repair taking?
I think it´s the tie rod. How much would cost me to fix it? For now I´m driving my brother´s car, but I need to fix mine this ASAP. I just want to know roughly what is the estimate. Thank you for answering.
R. Mauricio Contreras Here you go $28 www.ebay.com/itm/93-02-Mirage-93-94-COLT-SEDAN-AND-COUPE-93-95-SUMMIT-4-tie-rod-ends-/271518281509?fits=Year%3A2000|Model%3AMirage&hash=item3f37c02f25&vxp=mtr
97-02 Mitsubishi Mirage 1.5L Timing Belt + Tensioner Kit
eBay goo.gl/0Il78V
97-02 Mitsubishi Mirage 1.5L Water Pump
eBay goo.gl/CgNeXX
97-02 Mitsubishi Mirage 1.5L AC Belt
eBay goo.gl/KIuP0a
97-02 Mitsubishi Mirage 1.5L Alternator Belt
eBay goo.gl/ATiRcj
26 Gallon Oil-Free 1.8 HP 150 PSI Vertical Air Compressor
eBay goo.gl/GbhT2e
1/2" x 50' 300 PSI Red Rubber Air Hose
eBay goo.gl/TRqvV8
Amazon amzn.to/2p1rJE7
STEEL QUICK I/M 1/4 COUPLER PLUG SET STARTER KIT AIR TOOL
eBay goo.gl/BeF7Qz
Amazon amzn.to/2q1otXN
1/2" x 260" PTFE Thread Seal Tape
eBay goo.gl/xIYyFt
Amazin amzn.to/2oIE2mr
600ft/lb Impact Gun
eBay goo.gl/EdFS6L
Amazon amzn.to/2oP563T
OEM MITSUBISHI DOOR SCREW WITH CAP
www.streettunedmotorsports.com/parts/oem_evo_door_screw_cap.htm
DarkDragonWing where can i get workshop manual?
DarkDragonWing that's sucks doing those repairs in the winter
DarkDragonWing v
This is probably the best repair video I have ever seen. Well done.
Correct you most certainly are
You are good usually people send their cars in to the service centre for repair or servicing while you do it yourself you are awesome!
cheers
That's the most flammable work environment I've ever seen!
You're seriously my inspiration, I've never seen someone so patient like you with all this work. Your enthusiasm really makes me happy, I don't know why lol. Btw when are you saving up for new rims?
Thanks, cheers. And soon. I'm looking toward it.
Are u makes good fast furious car
Seriously impressive! You're a wizard. And to do that in the cold? Wow.
I really enjoy watching you assemble and disassemble the car parts. Keep up the good work!
Thank you for taking the time to make this video, it has given me confidence to try this. You are much appreciated!
Beast.
I had to do all that just to change my damn crank sensor but ended up doing the timing belt as well on my '02 lancer
Great video! Thank you, friend.
Thank you for details and great edits, subbed !
Thanks for putting this on youtube
thank you so much for the assistance bud! i did a good job because yours was better!
ว้าววว made in thailand คุณเป็นคนที่มีพรสวรรค์มาก เราชอบในสิ่งที่คุณทำ ขอบคุณสำหรับคลิปที่ทำให้ดู
ขอบคุณครับ
July 2021!! Super helpful man, literally had to do all of this besides change the water pump
congratulations on
200 000 SUBSCRIBERS!
+Cars 101 Thanks!! :D
Very impressive, I'm needing to change my timing belt and the works pretty soon on my Evo9, I enjoy being able to work on my own car
cheers
Mechanic expert
work well done
Красавчик. Видио что надо, все по делу ни чего лишнего. Супер. Успехов
I can not find videos in Thailand So come to see your video and impress me very much. Thank you from Tom.
ขอบคุณมากครับ
I wish I knew as much as you, I need to do the timing belt on my lancer but I don't even know how you did it even after watching this vid. You pulled off so much stuff! :/
Yes, it is different on the Lancer. This is a 1.5 engine, the Lancer got a 2.0 engine. so yea
Hopefully I will get to change the Timing belt on a Lancer.
ps. If I were you, and with no tools/equipments, I would not attempt to change it
cheers
i know its not a lancer fix but i still enjoy the mirage fix
you are the man! love watching your videos, keep up the awesome work
เยี่ยมเลย เปลี่ยนสายพาน นี่เปลี่ยนปั๊มน้ำไปด้วยเลยดีจังรื้อทีเดียว
MSEVOLVE by AMURO
عمل عظيم ورائع جداً لكن أنت تجعله يبدوا سهلا أنت مبدع أخي
Great video lad, helped me a lot
Great job, i see that you like to do things the right way i myself keep up the good work
good video man u know your stuff keep it going
I like that u have passion with mitsubishi .
I had a electrical problem with my car. I figured it out tho thanks for replying back.
O lol but yes the reluctor blades are located behind your camshaft sprocket the 2 brass lookin blades. on the right of the sprocket the a sensor that's the cps when the car is crank the blades spin and go thru the cps which tells the car ok we are TDC go and ahead and fire up. If the cps is faulty you will get no spark so doesn't matter how many times the timing is set also you did a great job putting everything together before cranking because the hermonic balancer or crankshaft pulley has to be on for the blades to position correctly or the blades could hit the cps and your car with be without fire. I'm so used to setting timing to my eclipse. I usually set timing turn it over if it fires up put everything together you're done if not go back and try again the mirage is a different when. It comes to the timing
MAN YOU ARE THE BEST THANKS FOR THE LESOSN
excelente travajo amigo saludos desde panamá🙋♂️🇵🇦👏💪👌
Have a 98lancer ce 1.5ltr 4g15 motor is this the same way to change the water pump
Thanks DarkDragonWing! ..BTW your videos are Great! ..way more informative then Manuals! ...I hope someday you do one on a Mirage tuneup.
+John Stenger Cheers!
เก่งมากๆครับ เปลี่ยน สายพานไทม์มิ่ง ปั๊มน้ำ เองได้ด้วย
Just curious why didn't you align the crank to top dead center? I am just worried that the pulley might could have jumped while you were taking the old belt out. I'm still new to changing timing belt, but your opinion would help my mind clear. Thank YOU! more power to your channel.
This one works for sure. If anything jumped, I can always use the other way you said.
Hi, Thanks for this very useful video. I have a water pump question. Is it really necessary to replace the water pump? The one you removed looked absolutely fine. I am changing all belts including the timing belt on 2000 model Lancer with a 4G15 engine with 100,000 km on the odo and I am being advised to not change the water pump as it’s the original Japanese part and they last a long time. What is your view?
If it works, don't replace it. Especially pretty low mileage.
Just a note of wisdom for you on a timing belt replacement.If you have not done this yet,it is smart to change the camshaft oil seal and crankshaft flywheel oil seal when you are already there with the parts exposed than to do the oil seal change later down the road when they leak oil.
คนไทย ในต่างแดน สุดยอดครับ
4G15 was legend. 3 Diamond Engine.
you really need power tool to take that egine mount off because i have rounded two bolts. so it going to be fun tomorrow.. cheers for the info
THE BEST THANK YOU!
great mechanics , good job bro,,
congratuiation on 211 181 subscribers
Great Video - Excellent work, Thank you.
พี่เก่งมากครับ ผมชอบพี่จิงๆ ผมติดตามพี่ตลอด เดี๋ยวไปลองทำมั้ง เครื่องตัวเดียวกัน...5555
นิวัฐ โชติรัตน์ ครับผม 55
ชอบดูมาก ยากดูซ่อมฮอนด้าซีวิคบา้งพอจะมีให้ดูบา้งใหม คุณแม็กกี้
+สมยศ บัวครี่ ยังไม่มีครับผม
Nice,i net this car will look and be awesome wen its done
very very cool thank you
best wishes from berlin
+Mad Men cheers
Awesome videos man I have a 2door 1.5 mirage stick shift do you have any idea where I can add transmission fluid at? I changed my clutch and could never find where to add transmission fluid, and just a question I thought your not suppose to tighten the harmonic balancer bolt with a impact?
penguino1283 It is fine for this car to impact it, no big deal, it works fine. For the transmission fluid for manual car, it is tricky. I would take it to the shop and have it changed there. cheers
Hello mr .macky i always watch your video,someday you fix my lancer
Good call, that belt was ready to snap
You are the best
Gracias por compartir sus conocimientos, buenas tomas, didactico.
I just had this job done by a garage and I'm afraid they might not of put in the new water pump, along with the new timing belt as I bought and supplied the new parts. Can I get that plastic timing belt cover off easily without taking off other stuff like the power steering pump?
+John Stenger You can get the top plastic cover off easily, yes.
Awesome job!
Hi man,
I am thinking of getting 4g15 DOHC 16V, instead of my current SOHC 8V, do you think it is a good idea?, I read some articles on it, but I am not sure if it will make much difference for me, please let me know if you have any comments. thank you :)
I think SOHC 8V is bigger than 4g15, that means SOHC 8V is more powerful.
DOHC 16 valve is 1.8 liter only
muy buen video amigo le pregunto si a la hora de cambiar la correa del tiempo cuando se saque la correa se corren los puntos no importa solo se llevaria al lugar que es y ya estaria en tiempo
Awesome work bro!
Hey man so is the water pump easy to get to and replace on a mirage? Mine is a 98
Drew Cobain If you're gonna replace water pump, you should replace all the belts too. Yes, it is easy to replace the pump. Just make sure to clean the surface good and I only use the gasket, and I use some grease just to make sure it stays inplace when I put the pump back in. If you also wanna use sealant that is made for water pump along with the gasket, it would be ok too.
E3
man you are a genius! subscribe!
เก่งมากครับรถเป็นไรก็ทำเอง ชื่นชมในความสามารถ
ครับผม
I'm watching your video to understand how I ensure I got the timing right. I'm replacing the timing belt on a 91 Lancer. Why is it important to mark the belt and the sprockets, shouldn't it be enough for the camshaft and crankshaft sprockets to align with their respective marks on the engine block? Thanks for your videos.
@user-zf4uz3hy8z It is already enough for the sprockets to align with their marks. I just don't bother to adjust the sprockets to align with their marks, just paint and done.
@@DarkDragonWing I see! It's good to have that as a back-up. I'll make sure to make those marks, to fall back on just in case I move the camshaft when I impact it. I've been replacing silent blocks and bushings in the front suspension (it drives so nice now), and a few other bits and bobs that keep me busy, but I'm about to dive into this part soon.
hopefully i jsut need to change the belt , but my lance has many problems i will try to get it done one at a time
Hey your vids are great!
Excellent ... thanks a lot !!!!
cheers
Bossing Maggie can you do sometime a fixing a lancer at least late model 94 to 96 model and with the motor 4g92 and I follow every video that you are sharing .... More power ...
so this is the vid i need thanks
Great videos. I have the 4g15 engine in a Proton Jumbuck from Malaysia. The car is a right hand drive for Australia. Would it be the same to change the timing belt and water pump on?
Regards Russell.
depends if its sohc ot dohc
Hey, what's the torque on the crankshaft pulley?
The torque spec for the crank pulley bolt is 95 ft. Lbs.
www.2carpros.com/questions/changing-the-timing-belt-on-a-4g15-interference-engine-sohc
Excelentes tus trabajos de mecanica en general y la manutención de tú auto,felicitaciones por favor haz referencia a la manutención de los frenos como se debe hacer paso a paso gracias. Desde Lisboa te saludos.
th-cam.com/video/mogzEM9k1Eg/w-d-xo.html
พี่ น่าเปิดอู่นะ ดูแล้วคล่องดี เปิดเมืองไทยนะ
hi ! thanx again for your videos last time that i asked something was the trouble that i was having with the poor horse power and too much fuel consumed in my lancer and checking out i discovered that the problem was one ignition coil wich i already ordered . see the first vidio was to change both lower arms, second was to change front and rear struts
and now i'm about to replace the water pump and there comes the question
what i'm watching is that you are replacing the water pump on a mirage it is the same water pump for 2003 lancer es ?
do you have a brand name wich fits better on my lancer???? thanx
+isamel valens Hi. Oh I think your 2003 Lancer ES has a 2.0L engine. You can watch this video for reference: th-cam.com/video/T__PVmqXf6g/w-d-xo.html
If you are gonna replace the water pump, you should replace the belts too. Here is a complete set: www.ebay.com/itm/Mitsubishi-Lancer-02-07-2-0L-SOHC-Timing-Belt-Tensioner-Seals-Water-Pump-Kit-/360852687802?fits=Year%3A2003|Model%3ALancer|Submodel%3AES&hash=item54047f0bba&vxp=mtr
Great video, but I think theres an error on how you have done the timing belt, the belt can go on anyway there was no need to mark it you should of marked the camshaft sprocket against the engine as a set point, if the sprocket moved the valves will be out of position resulting in the engine damage you mentioned earlier on of the video.
I agree with you, also there is already marks on the cam shaft and the head for timing and on the crank shaft and block. Great job but you never know the belt could've slipped and doing it that way would of changed nothing.
Hello good video a query what is the location of the MAF sensor in your engine?
It is good. God bless you.
timing belt has its own mark
quick question can you replace the water pump with taking the timing belt out?
Possibly, but challenging.
@@DarkDragonWing thanks.. the problem is i replaced the belt and the water pump both last year and the water pump is going bad!
็Hmm It's unfortunate, but it has to be done. Now get it done. haha This time make sure the surface is clean and the bolts are torqued to specs.
Hey mackey. I got my mirage leak. There is water underneat the passanger seat. Do u think it's because the a/c or water pump? I got my check engine on too. Maybe timing belt? It making click sound when i start the engine. Thanks
Kenick Willie If the water is green ,then it's the water pump. Check engine can be checked with this tool: www.amazon.com/Autel-MaxiScan-MS310-Diagnostic-Vehicles/dp/B005KOZ25Y/ref=cm_cr_pr_product_top?ie=UTF8
Thanks mackey. Anw. Can u help me with kind of part that i should choose on ebay? Its pretty confusing. I have 2001 mitsubishi mirage 1.8l es. And i want to change exactly the same part as urs. Cus, i believe the last owner never do anything with it
Kenick Willie
You want to change the timing belt, other belts, and water pump on your 1.8l?
Here buy this kit (you might not use everything in the kit, but it is a good deal): www.ebay.com/itm/Timing-Belt-Water-Pump-tensioner-GASKETS-Kit-Mitsubishi-Mirage-1997-2002-1-8L-/360792603162?fits=Model%3AMirage|Engine+-+Liter_Display%3A1.8L&hash=item5400ea3a1a&vxp=mtr
Here are the videos that will help you:
th-cam.com/video/T__PVmqXf6g/w-d-xo.html
th-cam.com/video/IBaVA4Xh8-g/w-d-xo.html
Thanks mackey. Hopefully this works and save me some bucks. Keep the great works man!
Can you do a video on replacing the transmission coolant lines?
Awesome video Man U have some serious editing skills n lots of patience however u might wanna be more careful about using loose clothes when working on moving parts trust me working on the oil field l have seen some serious accidents tha could have very easily been avoided by wearing the proper PPE Thanks a lot n regards from South Texas
hi I'm planning on changing the timing belt on my car and I have a ?. before I go on first I want to say thanks for all the great videos I've learned a lot from you and I didn't know nothing at all about cars now I'm not scared to do things on my own car so thanks a lot .so now for the ? when you do those marks with the white paint what exactly are you marking I want to know what exactly to mark because I've read that if you don't put the timing belt on correctly you can mess up the whole timing and the engine and be very sorry and of course I don't want that so can you explain it more to me and let me know exactly what to mark. thanks again
Nava Rodriguez Thanks! At 5:59 I marked the timing belt and the pulleys. Then I take the timing belt off. At 8:41
I matched the new timing belt to the old timing belt and marked the new
timing accordingly. Finally, I put the new timing belt on by matching
the marks on the pulleys. Cheers
ชอบมากเลยครับ
Hi,
I just complted the same work on my Mirage but it now hesitates to accelerate when the A/C is on. You made it look simple but it's quite a job. Did you reinstall the bottom half of the timing cover?
Thanks for the vids!
Yes, I did at 9:35
What car do you have?
2001 Mirage 1.8 Automatic
A Hernandez You might need new O2 Sensors to stop hesitating
Make sure you get DENSO
Thanks. I also saw your vids on how to change the O2 sensors and you also cleaned the maf sensor. Thanks for the advise and please post more videos with the Mirage or Lancer.
A 4 Cylinder like this will struggle a little when the A/C is on. When the compressor kicks in on my Lancer, it's almost like hitting a brick wall lol. Nonetheless, if it's seriously down on power after changing your timing belt, you may have left it a tooth off.
Great video, but why didn't you line the timing marks on Pullys up.
I painted the marks.
master!!👍😀
Just out of curiosity how long did it take you to replace the water pump? I am about to get a Mirage and it needs a new water pump and i am wondering about how long I can expect to be working on removing the old pump and replacing it with a new one?
If you are going to replace the water pump, you should also replace the timing belt. It should take a bout 6 hours or more. I would suggest start in the early morning so that you have the whole day to figure things out when you need to buy tools or parts. cheers
Hello there! I cant help but notice your steps are very similar to my video a few years back, was I your inspiration or just a coincidence? thanks!
importworx Haha Yes, I watched and commented on your video before I started this timing belt project. I believe yours is for the 1.8L, this one is 1.5L, but I got the idea of the steps. Thanks to you. cheers!
good job job on the video reaiiy enjoyed it thank you
Greetings Please send me the maintenance catalog for tightening bolts for engine parts
Hello. I'm sorry, I don't have the catalog for tightening.
My mirage de 2000 evaporates water and coolant you think I might need a new engine water pump or what could it be ??
Hmm, do you see any leaks? If not, then you might need a new pump. I think because the water is not moving so it got hot and boiled.
OR.. worst case would be that the coolant leaks into the cylinders and burn out that way.
Just what I think. cheers
Well today I found that some pipe line below the throttle body has a pine hole and water comes out through there , but also I think there might be another one because more water come out from below and it is not from where the water pump is ...
Fabo Gonzalez
That's good that you found out
Hello
I Have A question For You, is the big pulley belt markings different from the Timing belt markings ..? How do you get the accuracy of you have missed the markings
Also how do you get the distributor to line with the timing belt
What are the signs to look out if they align..
Again, thank you for this awesome video, I have learnt a lot
Here are the timing marks: www.2carpros.com/images/question_images/299175/original.jpg
Here is an information about the distributor: www.fixya.com/uploads/images/ed21d94.gif
Anything on O2 sensor Positioning … ??
Should both sensor be before the catalytic converter..?
@@crakkhausetv9827 I don't think 4G15 has an O2 sensor.
hi there. im a big fan. I have a 97 mirage LS coupe 2 door stick shift. I haf into an accident couple of months ago and I just wanted to know wher can I buy the front bumper nd hood of my car. i tried looking up online nd local crazy race. and I got a parts same as your car. in wont fit perfectly cuz its long.
+rommel gamboa
Front bumper
www.ebay.com/sch/i.html?_odkw=1997+Mirage+2dr+front+bumper&_sop=15&LH_BIN=1&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X1997+Mirage+coupe+front+bumper.TRS0&_nkw=1997+Mirage+coupe+front+bumper&_sacat=0
www.ebay.com/sch/i.html?_odkw=1997+Mirage+coupe+front+bumper&_sop=15&LH_BIN=1&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X1997+Mirage+2dr+front+bumper.TRS1&_nkw=1997+Mirage+2dr+front+bumper&_sacat=0
Hood
www.ebay.com/sch/i.html?_odkw=1997+Mirage+2dr+hood&_sop=15&LH_BIN=1&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X1997+Mirage+coupe+hood.TRS0&_nkw=1997+Mirage+coupe+hood&_sacat=0
www.ebay.com/sch/i.html?_odkw=1997+Mirage+2dr+front+bumper&_sop=15&LH_BIN=1&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X1997+Mirage+2dr+hood.TRS0&_nkw=1997+Mirage+2dr+hood&_sacat=0
very useful video,,,keep it up bro ^__^
cheers!
good video
How can I send you a video showing a problem I have with my Mirage 2001? When I start the engine and I retired the terminal cable of the battery, the car try to turn off or run in low charge, the pannel lights, radio, and external lights slowly gets low and low like is loosing power. I dont know if is a Relay, electrical cables, computer or is out of time.
Hi. It looks like you need a new alternator.
DarkDragonWing
I bought it, along with a new battery. When I turn on the car and the battery terminal is removed, the panel light turns off, the panel's backlights start to blink, the radio stops ringing and starts blinking as well. only when I accelerate, it stabilizes but once I stop accelerating it after several seconds the radio stops playing music and next to the panel they continue blinking. I have a video, could I send it to an email?
Hey, I own a mirage 2000 coupe too and my power steering just broke right now. As much as I would like to repair it myself, I don´t know anything about mechanics. About how much is the repair taking?
R. Mauricio Contreras Steering broke off. What part? The rag? Or the tie rod?
I think it´s the tie rod. How much would cost me to fix it? For now I´m driving my brother´s car, but I need to fix mine this ASAP. I just want to know roughly what is the estimate.
Thank you for answering.
R. Mauricio Contreras Here you go $28 www.ebay.com/itm/93-02-Mirage-93-94-COLT-SEDAN-AND-COUPE-93-95-SUMMIT-4-tie-rod-ends-/271518281509?fits=Year%3A2000|Model%3AMirage&hash=item3f37c02f25&vxp=mtr
Make in Thailand เย้ๆๆ เปลี่ยนยากป่าวครับ แล้วพี่จะแต่งต่อเลยป่ะครับ พวกล้ออะไรอย่างงี้อะครับ
55คับ เปลี่ยนไม่ยากถ้ามีเครื่องมือคับ ก็แต่งแน่นนอนครับ
Thanks good job.