Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/ls/13BO7QKGAZZV2/ref=nav_wishlist_lists_2?_encoding=UTF8&type=wishlist
Mick, keep trying on the smokes. It took me three times to quit over the years, and I was finally successful through smoking-cessation classes and medication. Daily walking helped, too. Hang in there, mate.
Micks Mowers Merchandise UK Store below micksmowersthemowerman.myspreadshop.co.uk/men?q=D1 Micks Mowers Merchandise USA Store below micks-mowers-usa.myspreadshop.com/all
Hi mick, just done one of these carbs myself. I had to take the plastic shaft out of the choke butterfly and sand it down a bit. The shaft was really sticky. Works a treat now.
There a decent machine the toros. I have a smaller one that I was given, hadn’t been looked after particularly well and didn’t run as it should. Like the one you’ve fixed, a quick clean and new plug and it was running well again. Good job Mick. Hank needs a sparking part in the next video 👍
My toro did the same thing when I cut the grass them when I shut it off to empty the grass it would not start until it cool off. I rebuilt the carburetor which was the problem. Alot of toros have the same problems and my brothers toro had the same issure..
Ive always wondered on mowers in general why they wouldn’t incorporate rubber mounting blocks from factory - between the motor and the frame given the vibration and weight of tue machine etc…… would be a lot smoother
PS - Mick I forgot to ask what’s your opinion about putting in petrol additives like octane booster which dilutes water etc into lawnmower tanks……. As you know they use it in cars.
Needs a new engine. It sounds like crap. Sounds like it’s got a real bad rack let alone piston slap. Hence all the smoke that it makes when it starts. It’s Kawasaki those are terrible I own two of them and that’s how I know
Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/ls/13BO7QKGAZZV2/ref=nav_wishlist_lists_2?_encoding=UTF8&type=wishlist
Nice work mower man mick , old hank was helping you out there , got a good laugh about 110 😄
Mick, keep trying on the smokes. It took me three times to quit over the years, and I was finally successful through smoking-cessation classes and medication. Daily walking helped, too. Hang in there, mate.
I'm vaping still.. not had one cig for over a year..
That was a fantastic video with your guest star Hank and he would never call you a liar
Lol.. ta for watching mate ... I appreciate our friendship
Your right Henry, Hanks a great guy 😉
@@almclean4835 thanks mate
Thank you for another video guys
TOOLS I USE -
Oil Extraction pump amzn.to/2UBApDI
Fan Blade Bulb amzn.to/39BLI4a
Blade removel tool amzn.to/3nxBVQj
Micro Drill Bits amzn.to/36Jpv0R
Carb Cleaning Files amzn.to/3lH8ESx
Hex Shank Extension Drill Bits Bar Set 1/4" 3/8" 1/2" amzn.to/3oFKHx9
Dewalt DCF887M1- Impact Driver, amzn.to/3oEVcjZ
Lawnmower Rotary Blade Balancer amzn.to/3e6UOWN
Rode WIGO Wireless GO Wireless Microphone amzn.to/2JlRlIN
Neewer 176 LED Light amzn.to/2HaubnJ
Universal Style, Mower Deck clamp for blades amzn.to/31PKygE
Briggs & Stratton Diaphragm and Gasket set amzn.to/3kF8Y3H
GT SONIC 3L Ultrasonic Cleaner amzn.to/2TDdVy9
VEVOR 3L Ultrasonic Cleaner amzn.to/2Gb3PBJ
Stainless Steel Strainer for carb jets in a cleaner amzn.to/3e6CxJ2
Micks Mowers Merchandise UK Store below
micksmowersthemowerman.myspreadshop.co.uk/men?q=D1
Micks Mowers Merchandise USA Store below
micks-mowers-usa.myspreadshop.com/all
Nice job Mick
Not bad well done luckily Hank was there to keep you honest 😂nice one Hank 👍👍👍👍🇮🇪☘️🇮🇪☘️🍺
Lol... Is that what he does
Hi mick, just done one of these carbs myself. I had to take the plastic shaft out of the choke butterfly and sand it down a bit. The shaft was really sticky. Works a treat now.
Yeah .. me too.. ta for watching mate
There a decent machine the toros. I have a smaller one that I was given, hadn’t been looked after particularly well and didn’t run as it should. Like the one you’ve fixed, a quick clean and new plug and it was running well again. Good job Mick. Hank needs a sparking part in the next video 👍
Ohhh Hank doesn't say much... That's why I like him lol
@@themowerman 😂
Nice one Mick that is one nice big machine even got a roll cage on it 👍👍👍👍
Yes it's a beast of a mower..
Those are great runners. Water doesn’t burn as good as gasoline. Cheers Mate
True that mate
My toro did the same thing when I cut the grass them when I shut it off to empty the grass it would not start until it cool off. I rebuilt the carburetor which was the problem. Alot of toros have the same problems and my brothers toro had the same issure..
Yeah I'm hearing the same....
Nice mower there mate 👍🏻 think the quality is good on that but not as the older ones
Thanks 👍
That was mean Mick, you know Hank's not a day over 105. 🤣
At least it was only water in the fuel, saved the guy some cash. 👍
Yeah man... It's still a very tired mower
Great video again mick. What’s the wee orange tray ur using mate?
Ohhh I got it from Amazon.. it's good for carb cleaning...
Forgot the pin to hold the float in place ...🤔 My guess.
Yes mate... 🙄
Ive always wondered on mowers in general why they wouldn’t incorporate rubber mounting blocks from factory - between the motor and the frame given the vibration and weight of tue machine etc…… would be a lot smoother
mick you can quit the vape also brother. i have made it 4 weeks today cold turkey. no cigars. nice job on the carb glad you saw the float pin.
I'm trying mate ...
Had a Toro Timemaster from new years ago , had nothing but trouble with it one thing after another going wrong. Never again !
Choke shafts always swell up on those engines. We see it all the time on Toro and Weibang machines.
Yeah.. I'm hearing the same
PS - Mick I forgot to ask what’s your opinion about putting in petrol additives like octane booster which dilutes water etc into lawnmower tanks……. As you know they use it in cars.
Yeah you can add it..
Pin missing from the float
Yes
It was fine when he dropped it off Mick!😂
Dropped it out the van more like
Smokes are for rich peo people lol nice job mick
Lol
Henry 🤣
Pin, wot pin LOL mate
Yeah well spotted
Hayden is my uncle
Yeah I know.. he's a great guy
From past experience I think it's a Toro issue. 😂
Lol... You never just said that
Never put the pin in.
Yep....
Hope pete wont het upset with you on phone to Hank ?
Pete BR500
Lol
Needs a new engine. It sounds like crap. Sounds like it’s got a real bad rack let alone piston slap. Hence all the smoke that it makes when it starts. It’s Kawasaki those are terrible I own two of them and that’s how I know
I hear ya... Also it has a lot is water in it... It's not smoking so much now... But like I said it's done a lot of work..