Whelen Hands Free Full Function 100/200 Watt Siren

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ธ.ค. 2017
  • sirennet.com/whelen-hands-fre...
    The Whelen Hands Free Full Function 100/200 Watt Siren (295SLSA1) siren offers a large, unique and distinctive collection of features designed to allow the user to customize the operation of this siren to suit their individual wants or needs. This is a compact, self-contained unit that is backward compatible to, and replaces the 295HFSA1/295HFSM1 with a slightly shallower in design for underdash/console mounting. The "Hands Free" feature lets you keep both hands on the wheel, both eyes on the road and access three siren tones and On/Off. The Scan-Lock Tone Programming feature lets you choose from 17 siren tones to preset during siren installation via a momentary switch located on the back of the unit secures siren tones for agency standardization. Now you can access siren tones using the Scan-Lock feature or check on/off status of your siren via an icon on your video system. The 295SLS Series sirens are full function plus radio repeat and public address.
    Features:
    Selectable 100 or 200 watt output.
    Power to drive two, 100-Watt speakers.
    Hands-free operation lets you keep both hands on the wheel.
    17 user selectable Scan-Lock siren tones to choose from at time of installation.
    Customize the placement of each siren tone on the rotary knob.
    Simulated mechanical siren tones.
    Harmonically-rich, composite Airhorn tones.
    Meets Class A Sound Requirements
    Title 13-compliant profiles
    "Siren in use" icon driver.
    Siren Interruption Control.
    Radio Repeat.
    Faceplate volume control knob.
    Two manual functions allow for additional siren tone choices.
    PTT (push to talk) switch on microphone overrides all siren functions.
    Combination On/Off and horn ring transfer switch.
    Hard-wired unidirectional microphone.
    Adjustable preset radio repeat volume.
    Input polarity protection.
    Non-destructive output short circuit protection.
    High and Low Voltage Shutdown.
    External spade-type fuse.
    Bi-polarity horn/ring control activation.
    "Aux Enable" activates siren tones via input (slide switch, power controls or relay-to-ground connection).
    Quick disconnect plug for ease of service or replacement.
    SI TEST, fully diagnostic silent test of amplifier and speaker(s).
    Adjustable intensity backlighting in soft LED non-glare green.
    Adjustable bail bracket allows the mounting of the siren in a variety of positions.
    Complements all Whelen's under dash products.
    Input Voltage: 12 VDC ±20%
    Input Current: 16 AMPS (TYP.)
    Dimensions: 2-1/2" (63mm) H x 6" (152mm) W x 7" (178mm) D.
    Weight: 3 lbs. 12 oz. (1.7kg)
    Whelen Five Year Warranty on Amplifier
    Part Number(s): 295SLSA1
  • ยานยนต์และพาหนะ

ความคิดเห็น • 16

  • @Ho11yw006
    @Ho11yw006 4 ปีที่แล้ว +2

    That’s cool! It sounds like the Wheelen sapphire omega!

  • @kenzymaina7462
    @kenzymaina7462 3 ปีที่แล้ว

    How do you connect the handsfree to the car horn.

  • @joeh690
    @joeh690 3 หลายเดือนก่อน

    What radio rebroadcast are you talking about? Is it the CB radio or your car radio with music ?

    • @SIRENNET
      @SIRENNET  3 หลายเดือนก่อน

      Good question - It's for using with a CB or communications radio [not for music]. Any signal that is received by the vehicle’s two-way radio will be simultaneously broadcast over the vehicle’s loudspeaker (the siren unit must be connected to the two-way radio as outlined in the installation manual).

  • @marshalgeneral4756
    @marshalgeneral4756 3 ปีที่แล้ว +1

    Can i use 2 300watt cone speaker that is not made by whelen?

  • @airfloresjp
    @airfloresjp ปีที่แล้ว

    What gauge are the power and speaker-to-siren wires?

    • @SIRENNET
      @SIRENNET  ปีที่แล้ว

      The power wire is 14 gauge and the speaker wires are a 16 gauge.

  • @eliecerdelacruz8184
    @eliecerdelacruz8184 2 หลายเดือนก่อน

    Hola amigo, como estás ?
    Te hablo desde Colombia, me urge una sirena de esa para una ambulancia, acá en mi país me ha sido difícil encontrar una

    • @SIRENNET
      @SIRENNET  2 หลายเดือนก่อน

      We'll be glad to help you with an order for this Siren, or a different model if you're looking for something else. We have siren speakers as well to go with if you don't already have one (or two). Please send an email to info@sirennet.com and we can help you out further. Thank you!

  • @lrios169
    @lrios169 4 ปีที่แล้ว +1

    My sirens stopped working outside of the vehicle but they can be hear very low from the box itself.

    • @SIRENNET
      @SIRENNET  4 ปีที่แล้ว +2

      If you haven't already, check the speaker. You might have a loose or disconnected wire.

    • @Occifer223
      @Occifer223 4 ปีที่แล้ว

      I'd check the wires, same thing happened to me.

    • @brianrem1470
      @brianrem1470 3 ปีที่แล้ว

      @@SIRENNET is there a way to change the tones on the siren in the back without blasting it through the speakers? maybe a test mode?

    • @marshalgeneral4756
      @marshalgeneral4756 3 ปีที่แล้ว

      @@brianrem1470 i would like to know too, i dont want to create distraction to others while changing tones.

  • @schnuurtchke
    @schnuurtchke 2 หลายเดือนก่อน

    The 295slsa1