I’ve got the tools and experience to solder and install other BECs, I’m definitely getting these and saving myself the headache this is way too easy. Awesome product guys!
You have to have two for rear steer. One for each servo. So you have to spend $100 practically the price of a whole Nother servo just to get the maximum power out of the servo’s that you bought. And the castle BEC 2.0 does not set to exactly 8.4 V dude this industry is disappointing at best.
My copperhead esc would brown out with a Holmes revolver and stock servo on my scx10. Full throttle run and turn would put it flat on its face. This is a much needed option.
Can I recommend 3m heavy duty Velcro in the rolls. I install all my electronics and batteries with it. You ever need to swap it’s a breeze. Don’t have to deal with the double sided tape!
Yeah, XT 60 is what’s on my FCX 10 Chevy blazer I did order the dual connector with the BEC and the black raw 500 servo is what I just put in last week. The stock one was OK for a year so not too bad.
What power driver are you using? I've not seen a powered driver tool from MIP before. Excellent effort by the great guys at Reefs, once again. I just purchased 2x 1100 Brass and a 99, for a Capra build I am working on, at the moment. Thanks for all the great products you guys make for us, to give us more time on the rocks!
Sorry newb question.....so if my servo is rated for 8.4v...I can plug my servo wire into the black plug that's connected to this ez bec?..then take the other black plug that's on your ez bec and put it in the channel1 slot in my flysky bs6 receiver?..then plug my esc xt60 plug into the reefs dual xt60 plug?..then take my 3s Lipo xt60 plug and plug that into the other end of the reefs dual xt60 plug?...then plug the red jst plug that is on the ez bec to the red jst plug that is coming outta the reefs dual xt60 plug?....sorry I just wanna make sure I'm getting this all correct...and again this bec side of things is confusing and I just don't wanna fry my electronics and the videos I try to watch the wiring looks crazy so I just always pushed it to the side...any help from you or any guys in the comments is greatly appreciated...thanks...
So I got an external battery for the bec but the red connector is a male but the Lipo battery’s I have are male as well how come there isn’t a female plug instead on the bec and can I just cut off and solder in the female???
I’ve got the tools and experience to solder and install other BECs, I’m definitely getting these and saving myself the headache this is way too easy. Awesome product guys!
Hell yeah!! It makes it so easy!
You have to have two for rear steer. One for each servo. So you have to spend $100 practically the price of a whole Nother servo just to get the maximum power out of the servo’s that you bought. And the castle BEC 2.0 does not set to exactly 8.4 V dude this industry is disappointing at best.
Very cool upgrade 💯💯 Easy Peasy✌️✌️
Yes indeed!
U guys at reefs r truly awesome engineers for that EZ-BEC awesome n thank u
Hell yeah! Thanks dude.
The shape reminds me of a old mini coffin ⚰️ kinda. I love it ❤
lol thanks.
This is great, typically I run direct power but I will grab a couple of these for my other setups!
Awesome!!!
Can this be used with direct power setups?
Nice add to the collection!
Thanks!
My copperhead esc would brown out with a Holmes revolver and stock servo on my scx10. Full throttle run and turn would put it flat on its face. This is a much needed option.
Yeah it is!!!
Sold. Going to get at least 3. Awesome.
Sweet!!!
Absolutely awesome 👌
Thank you! Cheers!
Can I recommend 3m heavy duty Velcro in the rolls. I install all my electronics and batteries with it. You ever need to swap it’s a breeze. Don’t have to deal with the double sided tape!
I will mention it to the team to see what we can do.
I do same
Super cool I just placed my order, I just got the raw 500 last week
Hell yeah. 👍
I needed this a week ago lol installed the CC BEC on my SCX6 had to solder and do a whole fancy wiring job.
for the next build!!!
@@reefsrc even just to give sweet and easy gains to rigs i already have! My capra or my defender would love one of these.
This is grate I’ll be getting a few
Hell yeah!!!
Yeah, XT 60 is what’s on my FCX 10 Chevy blazer I did order the dual connector with the BEC and the black raw 500 servo is what I just put in last week. The stock one was OK for a year so not too bad.
Sweet!!! That will be a big upgrade.
What power driver are you using? I've not seen a powered driver tool from MIP before. Excellent effort by the great guys at Reefs, once again. I just purchased 2x 1100 Brass and a 99, for a Capra build I am working on, at the moment. Thanks for all the great products you guys make for us, to give us more time on the rocks!
Thanks man, we picked this up at dixeland RC when we were at beat the creek its the best!
@@reefsrc Thank you, for that!
awesome upgrade!
Thanks!
Vanquish might have something to say about mip🤣. Both top tier though.
Vanquish makes a nice driver for sure, but they do not have the depth in tools MIP does.
Yeah I’ll need a few of these.
Get them while they are hot!
Can this work on a redcat RC 64 Lowrider with four 300’s reefs servos ? I think this will be an amazing ez-BEc for it !!!
No you would need 4 of them.
@@reefsrc 😰😰ok !! It be good if later on y’all can come up with one similar to this where it can be just plug & play 😎!!!
Awesome product game changer
Thank you!!
When will they be available I just looked at the website and didnt see them
They are live now for members
Sorry newb question.....so if my servo is rated for 8.4v...I can plug my servo wire into the black plug that's connected to this ez bec?..then take the other black plug that's on your ez bec and put it in the channel1 slot in my flysky bs6 receiver?..then plug my esc xt60 plug into the reefs dual xt60 plug?..then take my 3s Lipo xt60 plug and plug that into the other end of the reefs dual xt60 plug?...then plug the red jst plug that is on the ez bec to the red jst plug that is coming outta the reefs dual xt60 plug?....sorry I just wanna make sure I'm getting this all correct...and again this bec side of things is confusing and I just don't wanna fry my electronics and the videos I try to watch the wiring looks crazy so I just always pushed it to the side...any help from you or any guys in the comments is greatly appreciated...thanks...
Yeah man that all sounds correct to me!!!
Thanks for the quick response ordering one now...
What if I have rear steer can I use that with 2 servos
You can if you run a Y and want the rear to mimic the front.
@@reefsrc I run the rear independently on the flysky gt5
So you made a Traxxas BEC. Theirs has been plug and play for years!
How many volts and amps are you getting from that BEC. There is no info on it at all. guaranteed its not 8.4V.
My buddy has that traxxas bec and it's not even rated waste of money he said didn't notice a thing he said...I seen your comment and asked him
Just order one.
thanks Dude!
If you have a 2S truck, can you run a separate battery to power the BEC?
You can just need a lipo checker on the spare battery so you do not go below lvc
I’ll take 10
Just a thought is there a way to make a dual version for rear steer rigs?
We will have to look into this. Right now it’s not possible in separate channels
Will it hook up to a silent assassin
it will work with all esc.
Is there a setup for rear steer or do you recommend running 2 EZ-BECs?
You could run a y but then the rest would mimic the front. Or two bec.
Water proof?
Water Resistant no Proof.
So I got an external battery for the bec but the red connector is a male but the Lipo battery’s I have are male as well how come there isn’t a female plug instead on the bec and can I just cut off and solder in the female???
Our adapter comes with female plug so its meant to work with our system. You can change the battery or the plug on the bec to Female.
@ ah ok thank you for the clarification
Does this work only with Reef servos or any servo?
As long as the servo can handle 8.4v it will work.
Cool where can these be purchased and what MSRP?
Link in description
So what happens if the max on my servo is 7.4??? Can’t use it? Auto adjust
Correct. That will over power your servo.
Is it water proof
Water resistant.
you would think for $70(my currency) BEC they would design in a way to mount the BEC some where.
We got you. And it’s looks good.
Well damn if u can do it, I know I can!!🤣Freakin awesome dude. Really love it. I usually avoid using a bec but this is tits!
Thanks man!!!
Just run a fusion pro much better option.
This is for the guy who doesn’t or can’t run a fushion pro.
Fusion can't put out 8 volts
@@Mr19assassin74 no it can’t do 8 volts but it does 7.4 volts and that is plenty for a 1/10 scale crawler.
@@freerangehuman1976 that's your opinion.
@@Mr19assassin74 It’s a fact.
I am sold on don't haft to buy a 50 dollar programming kit
Perfect!