Good job fam u needed a heavy duty hammer for driving the concrete nails for the corner form what we normally do is nail them together square then place it in the corner and nail it up love the motivation
I suggest you start to feature budget and cost of each item to give viewers perspectives how much. Also, it would be useful to provide tips to save money.
Good day we did the design and sent it to the architect and he did the final draft.... info on the plan in the video th-cam.com/video/yGyblbCcFUk/w-d-xo.html
For a better an straighter cut just screw or clamp down that straight edge on the ply wood and run the saw along the edge much easier cutting true that that! Nice work still
Good day this is a great question. for some construction this can be done, but the beams and columns must be constructed with stronger reinforcements as there will be no vertical bars between the block and the block will just be there as a partition
Good question. It all depend on storage, if we oil it then the water from the concrete can’t soak it and if we store it away from the sun ☀️ we can gat a good amount of use. It’s all about caring.
Yes boss man GhettoPayne. Please listen to your wife as dust from cement and sawn timber gets into your lungs and you can pay the price in later life. My neighbour in England was a joiner and never wore masks. He’s now got lung disease the poor fellow. 🙏🏾🇬🇧🇯🇲
Hey good job you're doing ....i would like to ask how do you measure a t shape column... L shape column and bulkhead column jus need these info for charity
Not possible is these columns going to be in a wall or self standing size of columns are depending on the weight thats going above regular columns are 12x12 so the stirrup are made 10x10 inches and other columns that goes in the wall is 6x12 and the 5x 9 or 4.5x9 for the T columns its the same size stirrups and then tie then or you could make then with 1 lenght of steel
Ok thank you so much but I forgot to tell you that all those columns are on the wall and I forgot to tell you the info that I was seeking is based on boxing and casting of these type of columns
General you doing a great job you and the family the good ting is you can do the work keep going
Thanks bro trying to do it by the book
A it my g up move
I need a good carpenter
Good she taking care of u while u working. Nice drink u strong back
she is the best
The Camera 📷 person is doing well very steady with the camera 🎥, Jamaica 🇯🇲 to the world 🌎.
yep she is super awesome......... thanks
Dave The Builder! Can He Build It?! Yes! He Can!
yes we can lol
To get a straight cut home style, nail the straight edge to the ply board flush with the edge of the circlersaw,follow edge of the straight edge 👍
ill try that next time
Seem as if you are a goos carpenter
Good look
thanks
Good job fam u needed a heavy duty hammer for driving the concrete nails for the corner form what we normally do is nail them together square then place it in the corner and nail it up love the motivation
Like what you doing brother. Am learning. Can do my own now
respect bro glad to help
Keep up the great work big man.
WOW great progress
Thanks to god be the glory
Nice, new subscriber courtesy of Dino‘s world.
Thanks really appreciate your support
It a good look bro
I suggest you start to feature budget and cost of each item to give viewers perspectives how much. Also, it would be useful to provide tips to save money.
Yep like walking from the hardware with some lumbers like I did 🥵 in the burning sun
Like the camera person
Keep 3 or 4 blocks under your ply upwards for cutting 😊
Did you get a plan drafted?
Good day we did the design and sent it to the architect and he did the final draft.... info on the plan in the video th-cam.com/video/yGyblbCcFUk/w-d-xo.html
For a better an straighter cut just screw or clamp down that straight edge on the ply wood and run the saw along the edge much easier cutting true that that! Nice work still
a fi do that the next time..thanks
Whats the mix ratio for Gravel cement and sand for block pockets and columns?
for block pockets some ppl use 1 cement, 2 sand and 3 gravel but I use 1 cement, 2 sand and gravel... its a medium strength
Can you pour the colums first n then build in the blockwork for the sides later?
Good day this is a great question. for some construction this can be done, but the beams and columns must be constructed with stronger reinforcements as there will be no vertical bars between the block and the block will just be there as a partition
@@paynefuldiy thank u
Chicken wing, chicken wing 😁
lol
Can’t wait to have sleepovers lol
Yeeeaaaahhhhhh
Is this housing scheme down from Patrick City; as my mom had friends living in a few of those designed houses.
No sorry this is in Portmore
Make sure you ribs are 24 inches apart on the form
Whats the ratio for mixing the cement a sand for laying the blocks?
medium strength is best 2 to 1
I am in portmore Do you available to do some work on another building
i could help you if you willing to put in some work
link me on instagram
How much use can you get from the ply form?
Good question. It all depend on storage, if we oil it then the water from the concrete can’t soak it and if we store it away from the sun ☀️ we can gat a good amount of use. It’s all about caring.
@@paynefuldiy use baby oil (mineral oil) and beeswax, I see people using that combo to make paste wax, furniture wax etc...
@@JahleeyahKalonji ok I’ll have to try that
Yes boss man GhettoPayne. Please listen to your wife as dust from cement and sawn timber gets into your lungs and you can pay the price in later life. My neighbour in England was a joiner and never wore masks. He’s now got lung disease the poor fellow. 🙏🏾🇬🇧🇯🇲
@@lennieadi 😟as a today my mask 😷 will always be on
Well done but you need help
lol thanks mom
Hey good job you're doing ....i would like to ask how do you measure a t shape column... L shape column and bulkhead column jus need these info for charity
Not possible is these columns going to be in a wall or self standing size of columns are depending on the weight thats going above regular columns are 12x12 so the stirrup are made 10x10 inches and other columns that goes in the wall is 6x12 and the 5x 9 or 4.5x9 for the T columns its the same size stirrups and then tie then or you could make then with 1 lenght of steel
vm.tiktok.com/ZM6CULapK/ here is a tiktok line to explain the size
Ok thank you so much but I forgot to tell you that all those columns are on the wall and I forgot to tell you the info that I was seeking is based on boxing and casting of these type of columns
Ok then you can carry the blocks as close to 1 inch of the steel case when blocking up...its the size of the steel cage thats inportant
Why not use screws, instead of nail
blessings.. wanted to use screws but the funds was low.. but started using screws in my other videos
@@paynefuldiy yh buddy, it will be very easy for sure 👌 👍
@@anthonyknox9154 much respect
@@paynefuldiy 👊
The form work need to be plumb.
the walls are plumb so we just take it off the walls
Lol 😂 you start cutting wrong my friend, trying to teach a teacher 😮
My bad.. the saw blade was dull
Mad ..yute....
in the flesh 🙏