Want to control other brand lights with your @acinfinity Controller 69?! I show you how to control 3 types of non AC lights and setup you Controller 69! Schedule, remote dimming, on / off, even if your light has a plug only! Virtually all lights are compatible so simplify your setup and ditch those old light timers! List of Compatible 💡 and AC adapters: acinfinity.com/pages/ac-infinity-ecosystem/controlling-other-lights.html AC Infinity - Use Code "Highigan" save 10% www.acinfinity.com/?ref=highigan AC Amazon "Highigan" save 10% :amzn.to/3GUKBJI AC Amazon Canada "HighiganCA" save 10% Type 🅰 Adapter: acinfinity.com/hydroponics-growers/controllers/smart-uis-controllers/uis-lighting-adapter-type-a-for-rj11-12-connector-lights-with-pwm-or-0-10v-dimmers/ Type 🅱 Adapter: acinfinity.com/hydroponics-growers/controllers/smart-uis-controllers/uis-lighting-adapter-type-b-for-rj11-12-connector-lights-with-resistor-dimmers/ UIS Control 🔌: acinfinity.com/hydroponics-growers/controllers/smart-uis-controllers/uis-control-plug-for-outlet-powered-equipment/ Join the Highigan FAM for Exclusive Content, Photos, Discord Access, Early Access To New Videos And So Much More! This helps support our channel and helps us bring more content since TH-cam restricts our videos and blocks us from supporting this channel🙏💚🌱: www.patreon.com/highigan Time Stamps: 00:00 Types Of Lights You Control 00:26 Usage Scenario 01:10 AC 4x4 Grow Kit 01:45 Control a light with RJ11/12 Port 01:53 Type-A PWM/0-10v Or Type-B Resistor Dimming 02:36 Light Compatibility List 02:45 Type-A Installation 03:30 Setting Up The Controller 69 05:25 Control a plug based light / device 05:58 Plug 💡 Setup 06:13 Plug Controller Settings 07:39 Discount Code "Highigan" Save 10% 💚
if a person is using the Siperfarmer g4500 make sure to check to see if your driver is a MOSO or MEANWELL. it makes a difference in which port you will need.
Is the new AC Infinity humidifier warm mist or cool mist? I’m on the waiting list for the t3. If it’s a warm mist like my garbage Walmart humidifier then, I’m able to use it as a heat source. I found that generally my lights keep the tent about 68f which is great. When adding a warm mist humidifier, it increase the temp to roughly 72! Oh sorry those are nighttime temps, daytime temps with said setup run 68-82 respectively. Thanks again guys. Wife and I love watching someone so close living the dream!!
I have the 69 that I won from Highigan still in the box, I also use that Mars FCE-4800 in my 4X4 BUT this tech stuff is way over my head, I'll just use the ancient timers...
@@stangcobra592 don't feel bad I do the same thing. I bought the fce 6500 for my 4x4 tent. An having a hard time figuring out how far I should keep the light. At 75% the 1s one the floor seem the happiest the 1s 20 " seemed unhappy so I just lowered them. New lights aren't as easy as the old HPS. Were you hold your hand an if you can keep it there comfortably your good to go.
I figured out how to have the controller dim my light by increments of 1 when it reaches a certain temp (78/79f) while still using it's on/off cycle. it works SO nice, once the tent hits 79 degrees, the light will dim down from 10 to 9 and stop the air temp from rising. I've never actually seen it drop to 8. and i know the tent will hit like 82-83 with the lights on 10. My flower tents literally stay at 1.35kpa with no AC, no dehum, no humidifier.... just lights and exhaust fan controlled by the 69.
@@evalenzuela2629 go to the "advance" tab on the app under your light and: -set an automation for "Off Mode" to ensure your lights will turn off at the end (Mine is set to Off from 5am-5pm) -set an automation for "Auto" and set the low temp around 84 degrees and turn high temp off. also turn the high and low humidity off. Your light will turn off on a timer, and then when it turns on youll see it start at level 10 and dim down as temps get to that 80 degree area. It will usually only dim down to level 8 or 9 and as the tent cools down it bumps back up to 10 and continues that until lights off. all you have to do to adjust it is go back into that advance tab and adjust the lights low temp.
@@givemelbrty go to the "advance" tab on the app under your light and: -set an automation for "Off Mode" to ensure your lights will turn off at the end (Mine is set to Off from 5am-5pm) -set an automation for "Auto" and set the low temp around 84 degrees and turn high temp off. also turn the high and low humidity off. Your light will turn off on a timer, and then when it turns on youll see it start at level 10 and dim down as temps get to that 80 degree area. It will usually only dim down to level 8 or 9 and as the tent cools down it bumps back up to 10 and continues that until lights off. all you have to do to adjust it is go back into that advance tab and adjust the lights low temp.
I bought the AC 4x4 kit per your suggestion and I just have to say, thank you so much!! I love it!! I have 3 girls in veg getting ready to go to flower. My first grow!!! It makes it very easy to learn. The kit and controller work great. Thank you for explaining about different lights in this video. I was wanting to try my Vipar in there as well. Also, thank you for the promo code. Saved me about $100.🥹 If anyone is still on the fence about AC infinity, go for it! Thank you Heaven and Neil!
Ac infinity is an absolute game changer. I have a KS5000 coming tomorrow based off your recommendation. I had no clue I could control the light from the 69!! Thank you!
Got Controller 69 connected to the inline fan, ac infinity t3 humidifier, my HGL lights(uis control plug), and a heater(uis control plug). It's sick how easy it is to automate the entire grow for not a lot of money.
You just saved me $200!!! I have a LED that is controllable but does not have a built in dimmer. I want a trollmaster but I’m probably investing in one down the road. In the meantime the AC infinity is a 0-10v dimmer which is EXACTLY what I needed! Thanks for the video!!!
Awesome Video, with lots of great information! I just picked up a Gavita 1700 and was wondering how I was going to use it with my controller 69. Thanks! 😎👊
Thanks from Illinois here. I just wanted to say a lot of my set-up inspiration comes from you both. I currently have a 4x4 flower 2x2 veggie and saving for my 2x2 dry. You are as clean or cleaner than I and that's what I admire mostly about your videos, cleanliness 👍🥰 the plants love the attention anyway so I think it's a win win being extra clean, monk style ☺️. Thanks and have a great day 😎
That is awesome because I had no idea that AC Infinity had those products props to AC finity holding it down anyway thanks for the info always a great show can't wait for the giveaway on Sunday that going to be awesome thanks guys. Buy the way the room is looking 🔥 props to you guys let's get this show on the road✌️🔥💨💨💨💨
Thanks- I didn’t know I could control a resistance dimmer with my 69 Pro controller. Generally speaking I love the AC Infinity controller but the schedule function seems rudimentary to me. I run my fertigation with a $15 plug-in timer because the AC controller can’t handle it. I queried AC support about it and they didn’t bother to respond.
Highigan fam! Neil always coming in with the spicy knowledge! Thanks, man! Now I have a great excuse to upgrade my light outside of the AC family and still keep the UIS app oversight I have come to love and depend on. Love the flexibility they are building into their suite of tools. AC Infinity is truly changing the game.
Thanks Highigan and especially Neil because I know you're the nerdy one! I have been raving about the UIS Control plug as a good light controller option but I didn't know about the RJ 11 adapters. Those would work well for my Mars Hydro FC-E6500 and Grower's Choice ROI-E420 lights.
I want to buy this so bad but I'm horrible with technology and it's like 20 steps I would never be able to get it it sucks because I love this product so much
@@Haywoodjablomie100 I think so or at least i like to pretend it does, In theory it would allow the plants to adjust a little more gradual to the change in light intensity and about a 10 degree swing in temperature is distributed over the course 50-60 minutes as opposed to 5-10 minutes going from 0%-100%. I also like to folliar feed at 10% light intensity just before the off cycle so I like that but that can be achieved by simply manually dimming your light...so. The downside, probably losing some of the valuable photosynthesis time with the loss of full light intensity using the sunrise/sunset automations which may amount to 1 hour or slightly more per day. I use 18/6 for my lights for the autos I'm growing, for photos on the 12 hrs flower cycle I set the sunset/sunrise intervals to 5 mins instead of 8. Hope this may help you.
Just an FYI...those controller 69's will change your settings on their own at times. Great product and I'm sure they are still working out some bugs. Just be aware of this issue. I'm running 4 of them.
@@Highigan They are up to date. One firmware update caused a loss of connection. I've had lights stay on past their set time, fans increase or decrease speed on their own. I've had 2 of my controllers replaced by AC Infinity due to issues. They are great considering the price point, just be aware that they can have weaknesses.
I've got to research more on compatibility with the Type A adapter and Kind LED 750 lights. AC infinity says to use the UIS plug, but the Type A adapter when connected to the controller still appears as a extra device, and it makes me wonder if it'd turn on/off the lights.
Sending good vibes GUY'S AWSOME videos 🔥set up can't wait try get controller 69 ac infinity are knocking it oot Park N 2023 with all sorts gadgets lol 🏴💚🌱🙏👌👍✌️💯🔥🐈
Does this control have dimming options. And also is it necessary or beneficial to start dimming like a normal day on the schedules for the plants like morning and evenings when sun goes down? Thank you
Why is no one mentioning that you need to buy a power source. Ie. ac infinity product, or the power socket adapter. The adapter that you buy to connect your light does not power up the controller 69. Wish I had of known this prior. I would not have bought it.
@@ik-ik7ke I have no other ac products. This controller is the first. I assumed by all the videos talking about how you can connect any light with the correct adapter, they will work. My point is, no one has mentioned the fact you need at least one ac product, or a power supply cord, to do so. That’s what I’m talking about.
The type A adapter doesn't turn my light on for some reason I tried manual schedule as you show and also advanced automation, nothing turns it on. My light is SF1000, supposed to be compatible with type A adapter but I can't get it working... edit: after reviewing my light label it appears it has a resistor dimming with meanwell driver and therefor I bought the wrong type adapter and should have picked type-B... 122usd to ship to my country... F
Great question, I do not believe so since they use their own UIS usb-c style fan connector, I don't believe anyone else sells an exhaust fan with that type of connector.
@Highigan Please translate your video into German (AI voice)! Cannabis has been legal in Germany since 01.04.2024. But there are no German videos about it here. The controllers are also not yet available in grow stores in Germany. Only climate control devices or then you can change the light spectrum in a VERY high price range. I would also be happy to make an updated one if there are any innovations here. It can only bring you clicks. 😉 What do you think about the lights from “Greenception” (German) or “Sanlight” (Austria)? I have a Vipaspectra P1000 👍 👌
Is it possible to make my SF-1000s using RJ11 and this dim by 10% automatically when temps get too hot? Or is it not able to do that? If it can I think they’ve made a sale
I have the pro 69. I'm having issues with my lights shut off randomly for 2 or 3 seconds. Then coming back on what can I do to fix this problem? I'm reaching for help
Love the content you're doing. I wish AC controller 69 had more than 4 UIS plugs. May need to buy another one to keep the whole grow automated. I have the bluetooth controller 69 and do all the set through the app. I use the outlet for non UIS items to control my humidifier, but have to unplug an oscillating fan to plug that in. How do you get the VPD to show on your controller? Mine only show temp and humidity. See you tomorrow evening for the live stream.
I'm very green to using grow tents so the terminology has me quite befuddled until I sort out that issue (learning curve is sometimes steep). I bought the AC Infinity 69Pro controller and the Spider Farm SF2000 LED Grow Light with Samsung LM301B Diodes & Dimmable Lighting. I don't see wording (Type A PWM 0-10v or Type B resistor dimming) in product information that is showing me the way, lol... Please, please, please which adaptor do I need? There's a phone like connector on the SF2000 panel and nowhere to connect it to on the controller. I'll love you forever for an answer!!!
Contact AC Infinity support. I had the same issue and they emailed me back with the proper cable I needed to purchase. All is well now. I just need to figure out the programming. Not doing so well with that.
I use there tent, controller, oscillating fan, exhaust, and humidifier. So basically everything but there lights and that’s only that I’m a big fan of bar style lights. But bro if they make a bar light then I might as well get a tattoo! 😂
@@ColemanCanna exactly. There humidifiers are legit. They pump out more steam on the lowest setting then the $80 humidifiers from any brand you can buy locally. I have three humidifiers from Walmart and Amazon and there is no comparison.
Have you noticed any problems with the controller 69 Pro? Because I have 2 Mars Hydro FC 3000 hooked up to the 69 Pro and after power three on the lights my light start the surge but as soon as I disconnect the controller they don't surge anymore have you heard of this problem?
Can't you just strip their UIS câble and connect the + and - to your lamp ? If their fans are 220v it means the UIS can provide 220v, it just have a third pwm cable you not need for a lamp.
Want to control other brand lights with your @acinfinity Controller 69?! I show you how to control 3 types of non AC lights and setup you Controller 69! Schedule, remote dimming, on / off, even if your light has a plug only! Virtually all lights are compatible so simplify your setup and ditch those old light timers!
List of Compatible 💡 and AC adapters: acinfinity.com/pages/ac-infinity-ecosystem/controlling-other-lights.html
AC Infinity - Use Code "Highigan" save 10% www.acinfinity.com/?ref=highigan
AC Amazon "Highigan" save 10% :amzn.to/3GUKBJI
AC Amazon Canada "HighiganCA" save 10%
Type 🅰 Adapter: acinfinity.com/hydroponics-growers/controllers/smart-uis-controllers/uis-lighting-adapter-type-a-for-rj11-12-connector-lights-with-pwm-or-0-10v-dimmers/
Type 🅱 Adapter: acinfinity.com/hydroponics-growers/controllers/smart-uis-controllers/uis-lighting-adapter-type-b-for-rj11-12-connector-lights-with-resistor-dimmers/
UIS Control 🔌: acinfinity.com/hydroponics-growers/controllers/smart-uis-controllers/uis-control-plug-for-outlet-powered-equipment/
Join the Highigan FAM for Exclusive Content, Photos, Discord Access, Early Access To New Videos And So Much More! This helps support our channel and helps us bring more content since TH-cam restricts our videos and blocks us from supporting this channel🙏💚🌱: www.patreon.com/highigan
Time Stamps:
00:00 Types Of Lights You Control
00:26 Usage Scenario
01:10 AC 4x4 Grow Kit
01:45 Control a light with RJ11/12 Port
01:53 Type-A PWM/0-10v Or Type-B Resistor Dimming
02:36 Light Compatibility List
02:45 Type-A Installation
03:30 Setting Up The Controller 69
05:25 Control a plug based light / device
05:58 Plug 💡 Setup
06:13 Plug Controller Settings
07:39 Discount Code "Highigan" Save 10% 💚
Good production and editin 😎🤙
if a person is using the Siperfarmer g4500 make sure to check to see if your driver is a MOSO or MEANWELL. it makes a difference in which port you will need.
Sending good vibes highigan gromies love the info provided like this controller 69 as busy but always worrying about ladies lol 🏴💚🌱👌👍✌️🙏💯
Is the new AC Infinity humidifier warm mist or cool mist? I’m on the waiting list for the t3. If it’s a warm mist like my garbage Walmart humidifier then, I’m able to use it as a heat source. I found that generally my lights keep the tent about 68f which is great. When adding a warm mist humidifier, it increase the temp to roughly 72! Oh sorry those are nighttime temps, daytime temps with said setup run 68-82 respectively. Thanks again guys. Wife and I love watching someone so close living the dream!!
Will it auto dim tho like a gavita el2 or Trolmaster
AC Infinity is killing it in the grow equipment department!
I have the AC infinity 69 pro with the Mars Hydro FC-E4800 and it works amazing. I also use it to control my humidifier and dehumidifier
That's what's up! Definitely plan on doing that also!
I have the 69 that I won from Highigan still in the box, I also use that Mars FCE-4800 in my 4X4 BUT this tech stuff is way over my head, I'll just use the ancient timers...
@Stang Cobra I have the FC-4800 and the type a adapter and it didn't work. The light just shuts off as soon as you plug it in
@@stangcobra592 don't feel bad I do the same thing. I bought the fce 6500 for my 4x4 tent. An having a hard time figuring out how far I should keep the light. At 75% the 1s one the floor seem the happiest the 1s 20 " seemed unhappy so I just lowered them. New lights aren't as easy as the old HPS. Were you hold your hand an if you can keep it there comfortably your good to go.
This vid was well worth the price of admission...
I figured out how to have the controller dim my light by increments of 1 when it reaches a certain temp (78/79f) while still using it's on/off cycle. it works SO nice, once the tent hits 79 degrees, the light will dim down from 10 to 9 and stop the air temp from rising. I've never actually seen it drop to 8. and i know the tent will hit like 82-83 with the lights on 10. My flower tents literally stay at 1.35kpa with no AC, no dehum, no humidifier.... just lights and exhaust fan controlled by the 69.
Hell yeah!
Can you share how you set this up? I’d like to do the same thing.. Starting at 80f, start ramping down the light. Thxs.
How did you do that bro?
@@evalenzuela2629 go to the "advance" tab on the app under your light and:
-set an automation for "Off Mode" to ensure your lights will turn off at the end (Mine is set to Off from 5am-5pm)
-set an automation for "Auto" and set the low temp around 84 degrees and turn high temp off. also turn the high and low humidity off.
Your light will turn off on a timer, and then when it turns on youll see it start at level 10 and dim down as temps get to that 80 degree area. It will usually only dim down to level 8 or 9 and as the tent cools down it bumps back up to 10 and continues that until lights off.
all you have to do to adjust it is go back into that advance tab and adjust the lights low temp.
@@givemelbrty go to the "advance" tab on the app under your light and:
-set an automation for "Off Mode" to ensure your lights will turn off at the end (Mine is set to Off from 5am-5pm)
-set an automation for "Auto" and set the low temp around 84 degrees and turn high temp off. also turn the high and low humidity off.
Your light will turn off on a timer, and then when it turns on youll see it start at level 10 and dim down as temps get to that 80 degree area. It will usually only dim down to level 8 or 9 and as the tent cools down it bumps back up to 10 and continues that until lights off.
all you have to do to adjust it is go back into that advance tab and adjust the lights low temp.
I bought the AC 4x4 kit per your suggestion and I just have to say, thank you so much!! I love it!! I have 3 girls in veg getting ready to go to flower. My first grow!!! It makes it very easy to learn. The kit and controller work great. Thank you for explaining about different lights in this video. I was wanting to try my Vipar in there as well. Also, thank you for the promo code. Saved me about $100.🥹 If anyone is still on the fence about AC infinity, go for it! Thank you Heaven and Neil!
Controller 69 is great but this editing is top notch. Keep it rolling 😎
Ac infinity is an absolute game changer. I have a KS5000 coming tomorrow based off your recommendation. I had no clue I could control the light from the 69!! Thank you!
AC Infinity rocks.
Got Controller 69 connected to the inline fan, ac infinity t3 humidifier, my HGL lights(uis control plug), and a heater(uis control plug). It's sick how easy it is to automate the entire grow for not a lot of money.
You just saved me $200!!! I have a LED that is controllable but does not have a built in dimmer. I want a trollmaster but I’m probably investing in one down the road. In the meantime the AC infinity is a 0-10v dimmer which is EXACTLY what I needed! Thanks for the video!!!
That thing looks like it’s exactly what home growers have needed to elevate their game. Awesome 👏🏻
I have an AC Infinity two-by-four it's wonderful it's works great
Absolutely love this controller. Running a RDWC system and the AC Infiniti app let's me keep an eye on numbers without being home!
Awesome Video, with lots of great information! I just picked up a Gavita 1700 and was wondering how I was going to use it with my controller 69. Thanks! 😎👊
Thanks from Illinois here. I just wanted to say a lot of my set-up inspiration comes from you both. I currently have a 4x4 flower 2x2 veggie and saving for my 2x2 dry. You are as clean or cleaner than I and that's what I admire mostly about your videos, cleanliness 👍🥰 the plants love the attention anyway so I think it's a win win being extra clean, monk style ☺️. Thanks and have a great day 😎
same
Mars hydro has the 2x2 on eBay for under 70. I got the 27 inch for 65
Thanks guys- Great video got me up and running with the app. I was pushing buttons like an ape on the controller, LOL.
That is awesome because I had no idea that AC Infinity had those products props to AC finity holding it down anyway thanks for the info always a great show can't wait for the giveaway on Sunday that going to be awesome thanks guys. Buy the way the room is looking 🔥 props to you guys let's get this show on the road✌️🔥💨💨💨💨
Thanks- I didn’t know I could control a resistance dimmer with my 69 Pro controller. Generally speaking I love the AC Infinity controller but the schedule function seems rudimentary to me. I run my fertigation with a $15 plug-in timer because the AC controller can’t handle it. I queried AC support about it and they didn’t bother to respond.
Wow Thank you, That was extremely helpful. I have Vipar Ks and Xs lights and for me this information is a game changer
Congrats on the new Digs. Love the new grow room guys. Can't wait to see you fill them.
ive got the controller 67 which i thought was good but this is another level.. great vid Neil 😎
Highigan fam! Neil always coming in with the spicy knowledge! Thanks, man! Now I have a great excuse to upgrade my light outside of the AC family and still keep the UIS app oversight I have come to love and depend on. Love the flexibility they are building into their suite of tools. AC Infinity is truly changing the game.
Thanks Highigan and especially Neil because I know you're the nerdy one! I have been raving about the UIS Control plug as a good light controller option but I didn't know about the RJ 11 adapters. Those would work well for my Mars Hydro FC-E6500 and Grower's Choice ROI-E420 lights.
Needed this video. Just got the cloudlab with Evo 6. Gonna study y'all to see what's up.
Thank you!!! Your ac infinity phone instructions helped me!
Thinking about getting the ius control plug will it work for my hurricane 18” fans ?? And will the 69 pro be able to control it ?
Thank you guys this was a super helpful video
I want to buy this so bad but I'm horrible with technology and it's like 20 steps I would never be able to get it it sucks because I love this product so much
Need the UK model of the uis controlled plug! Great info 💯
Awesome review yall! Thank you :)
much love from california
Thank you for this super helpful tutorial!
Thank you for the information and I have one on the way
Love watching with my wife we love all your wicked clothes u have and everything you do you have made growing more and more fun with every video
I have my 69 Pro setup with my lights to simulate Sunrise/Sunset, the lights fade in/fade out at 10%, 30%, 60% and then to 100% at 8 minute intervals.
Does it help?
@@Haywoodjablomie100 I think so or at least i like to pretend it does,
In theory it would allow the plants to adjust a little more gradual to the change in light intensity and about a 10 degree swing in temperature is distributed over the course 50-60 minutes as opposed to 5-10 minutes going from 0%-100%. I also like to folliar feed at 10% light intensity just before the off cycle so I like that but that can be achieved by simply manually dimming your light...so.
The downside, probably losing some of the valuable photosynthesis time with the loss of full light intensity using the sunrise/sunset automations which may amount to 1 hour or slightly more per day. I use 18/6 for my lights for the autos I'm growing, for photos on the 12 hrs flower cycle I set the sunset/sunrise intervals to 5 mins instead of 8.
Hope this may help you.
Running a vipar ks5000. I'm definitely interested in this controller.
Just an FYI...those controller 69's will change your settings on their own at times. Great product and I'm sure they are still working out some bugs. Just be aware of this issue. I'm running 4 of them.
What settings? I have not experienced any issues like that yet. Make sure you are up to date with firmware for the controllers via the app.
@@Highigan They are up to date. One firmware update caused a loss of connection. I've had lights stay on past their set time, fans increase or decrease speed on their own. I've had 2 of my controllers replaced by AC Infinity due to issues. They are great considering the price point, just be aware that they can have weaknesses.
@@1seriousgearheadify Did you confirm your setting? You might have to scroll to the confirm button.
Just bought a cloudray s6 and the controller 69 pro, oh I can’t wait 😂
How do i find out what i need to connect viparspectra xs 2000 to 69 pro
Thank you! Great info.
💚👍great job on the video✌
I have a medic grow mini sun300 tried both ports and they don't work for this light. I will have to try the plug
Great information, thanks!
I've got to research more on compatibility with the Type A adapter and Kind LED 750 lights. AC infinity says to use the UIS plug, but the Type A adapter when connected to the controller still appears as a extra device, and it makes me wonder if it'd turn on/off the lights.
FOR Spider Farmer® Upgraded SE7000 730W (which AC Infinity RJ11/12 to UIS Port Type-A Adapter Dongle or TYPE-A) ?1
Sending good vibes GUY'S AWSOME videos 🔥set up can't wait try get controller 69 ac infinity are knocking it oot Park N 2023 with all sorts gadgets lol 🏴💚🌱🙏👌👍✌️💯🔥🐈
You guys are the bomb!!!!!!!
Can't wait till mine arrives
how many amps are needed for each tent?? make new video on that please
Hey guys, I cant seem to find out witch one I need for the aglex m1000 can you help to let me know witch one to get ?
Could you show a video on all the controller 69 setting you use for your autos and how to set it up?
Love your vids ❤
Can it work with SANLIGHT lights ? I can buy a dimmer adapter for it but it have no external buttons can it work ?
A meross connected powerstrip is a way cheaper alternative to just schedule lights
🗣️Thank you for sharing.
Awesome video hommie
Does this control have dimming options. And also is it necessary or beneficial to start dimming like a normal day on the schedules for the plants like morning and evenings when sun goes down? Thank you
Sorry if this has been answered or i missed it. Can this be used to control a gavita 1700e
I cant find what kind of dimming my Spider Farmer SE1000W CO2 LED Grow Light uses. Would any of you know?
Why is no one mentioning that you need to buy a power source. Ie. ac infinity product, or the power socket adapter.
The adapter that you buy to connect your light does not power up the controller 69.
Wish I had of known this prior. I would not have bought it.
what are you talking about
@@ik-ik7ke I have no other ac products. This controller is the first.
I assumed by all the videos talking about how you can connect any light with the correct adapter, they will work.
My point is, no one has mentioned the fact you need at least one ac product, or a power supply cord, to do so.
That’s what I’m talking about.
I feel like I could rl go in on the intro music.
Maybe next year. Jus set everything up with govee products. Only cause it was cheap n I like the app. Damn I wish I bought into this first. Oh well
Awesome! Was hoping I could use it with my se7000. Lfg
Are the other AC infinity controllers able to adjust other brand lighting or is it just the 69?
The type A adapter doesn't turn my light on for some reason I tried manual schedule as you show and also advanced automation, nothing turns it on. My light is SF1000, supposed to be compatible with type A adapter but I can't get it working...
edit: after reviewing my light label it appears it has a resistor dimming with meanwell driver and therefor I bought the wrong type adapter and should have picked type-B... 122usd to ship to my country... F
Is there a way to just set sunrise and sunset and call it a day? With lights
Sorry but I'm stuck whith what adapters I need to use for this to work whith the ts1000 from marshydro I can find the answer on the Internet
Does this work with the lumatek 300W pro?
Can I daisy chain a targeted spectrum light to my ionboard? Will they ALWAYS be same dimness and same on/off?
Any help on hooking up my VIVOSUN vsf4300 to my controller 69 pro ? I bought the lighting adapter but I’m having trouble configuring
Thank you
Can you use any duct fan with the ac infinity 69 controller will it be able to do the functions as a ac infinity duct fan
Great question, I do not believe so since they use their own UIS usb-c style fan connector, I don't believe anyone else sells an exhaust fan with that type of connector.
@Highigan Please translate your video into German (AI voice)! Cannabis has been legal in Germany since 01.04.2024.
But there are no German videos about it here. The controllers are also not yet available in grow stores in Germany. Only climate control devices or then you can change the light spectrum in a VERY high price range.
I would also be happy to make an updated one if there are any innovations here. It can only bring you clicks. 😉
What do you think about the lights from “Greenception” (German) or “Sanlight” (Austria)?
I have a Vipaspectra P1000 👍 👌
Thank youuuu
Is it possible to make my SF-1000s using RJ11 and this dim by 10% automatically when temps get too hot? Or is it not able to do that? If it can I think they’ve made a sale
Do you think it would work for a mars hydro fc6500 ???
what to buy to add the extra AC infinity s22 to controller when 2-in-1 splitter out of stock??
Do you think the EVO4 for the 3x3 grow tent will work good in a 4x4?
Have heard the controller has issues when used with hid. Has this been resolved?
Can i plug my spider farmer sf40000 on the 69?
Yessir
I have the pro 69. I'm having issues with my lights shut off randomly for 2 or 3 seconds. Then coming back on what can I do to fix this problem? I'm reaching for help
Reading that's pretty common
What would you say the optimal setting are if your run full ac set up ?
But can you only do one uis adaptor plug ?
What would I need to do for migro led
I have a vipar spectra p2000 which adapter would i need a or b
Hmm Ac infinity controllers cannot run RJ9 lights. Only rj/11/12. So not any
Love the content you're doing. I wish AC controller 69 had more than 4 UIS plugs. May need to buy another one to keep the whole grow automated. I have the bluetooth controller 69 and do all the set through the app. I use the outlet for non UIS items to control my humidifier, but have to unplug an oscillating fan to plug that in. How do you get the VPD to show on your controller? Mine only show temp and humidity. See you tomorrow evening for the live stream.
I'm very green to using grow tents so the terminology has me quite befuddled until I sort out that issue (learning curve is sometimes steep). I bought the AC Infinity 69Pro controller and the Spider Farm SF2000 LED Grow Light with Samsung LM301B Diodes & Dimmable Lighting. I don't see wording (Type A PWM 0-10v or Type B resistor dimming) in product information that is showing me the way, lol... Please, please, please which adaptor do I need? There's a phone like connector on the SF2000 panel and nowhere to connect it to on the controller. I'll love you forever for an answer!!!
Contact AC Infinity support. I had the same issue and they emailed me back with the proper cable I needed to purchase. All is well now. I just need to figure out the programming. Not doing so well with that.
Hello Neal
How do you setup the simulated sunrise and sunset on the 69 controller? Need to do a video on that subject please. 8:17
Can you tie in another tent to the one fan for the charcoal filter?
Hope that same thing n ac infinity tent kit I just ordered wish new bout code before lol
I use there tent, controller, oscillating fan, exhaust, and humidifier. So basically everything but there lights and that’s only that I’m a big fan of bar style lights. But bro if they make a bar light then I might as well get a tattoo! 😂
ya if they go to bar lights i will simply switch without a second thought
@@ColemanCanna exactly. There humidifiers are legit. They pump out more steam on the lowest setting then the $80 humidifiers from any brand you can buy locally. I have three humidifiers from Walmart and Amazon and there is no comparison.
very good
Have you noticed any problems with the controller 69 Pro? Because I have 2 Mars Hydro FC 3000 hooked up to the 69 Pro and after power three on the lights my light start the surge but as soon as I disconnect the controller they don't surge anymore have you heard of this problem?
Try staggering start times by 5 minutes. This allows one light to stabilize from the surge of start-up.
Also what adapter would I need for ts1000 marshydro
Does this work with the controller 69? Not pro just 69.
Can't you just strip their UIS câble and connect the + and - to your lamp ? If their fans are 220v it means the UIS can provide 220v, it just have a third pwm cable you not need for a lamp.
Do you have to have a ac infinity tent in order to already have the velcro straps for the controller mount?
I’ve been debating on if I got this inline fan from ac infinity can I still mount it or will I have to rig or just stick it on top of my tent