This is the BEST video for this type of removal! WOW you helped me 100% to make up my mine to remove and replace the intake manifold for my mom's jeep. Mom just got back from the Jeep Dealers Garage. They said she needs the intake manifold fold replaced? I've never heard of that the intake manifold going?? Has anyone heard of that? They said it was going to cost her just over $900.00 to replace parts and labor ! I told her I would go to the auto wreckers and take one out and replace it myself, this video changed my mind to even attempt to do it. So I told mom to get the estimate and find somewhere cheaper to do it. So she did and they wanted $540.. parts and labor. Those dealers are such a rip off! But seriously is even possible for the intake manifold to go?
I don't believe there is a fuel pump fuse for this vehicle. The Haynes manual tells you to take off the back seat and disconnect the fuel pump manually.
Thanks so much for the video man, definitely helpful for us DIY guys. I'm the original owner of an '09 Sebring 2.4L, with over 262k on my car, it might be time for me to do this. Oh and you're throttle body replacement video is great as well, doing that tomorrow while corona virus has me on lockdown 😆
Thanks! Its really hard to find videos about jeep compass engines. Thanks for being brave doing it yourself and sharing! There were just safety issues that should have been taken in consideration. But overall, thanks for the hard work!
jeep compass manifold are impossible to find there are over 2000 on back order for the manifold, and iv been waitinf 6 months now, they keep moving the month forward, i have been driving with a cracked intake manifold for 5 months im getting worried it might damage something
If you take that manifold off you need to replace the gasket otherwise it will leak its not meant to be reused although it may look ok Its not expensive so dont risk it Its not worth it to do all that work over again
Gotta love those tabbed connectors 🤦🏻♂️ I can't tell you how many pigtails I've spliced because the clips break when you remove them! It made me quick with soldering though! I learned the NASA method of doing it. If it's good enough for space, it's good enough for me!
Love the video.... my wife has a 2016 jeep compass latitude 2.4 I've changed every gasket except the head and intake manifold about to do the manifold hers has the 6f24 automatic transmission I serviced it.. it was a pain so I replaced the transmission hoses with 200 psi clear hoses so if I wanna check the fluid to see if its good( as far as color) I just look at the hoses😂😂
Did you have to put any sealant when you had to reinstall it back . I had one put on my Dodge Caliber and it’s still leaking oil into the intake manifold.
please help. i have a 2011 jeep compass 2.4 with the cvt trans. the car was running rough at times, no codes. after a couple months had a code that said throttle body was bad. i replaced the throttle body and check engine light went out and the car ran great. after a couple days the car started running rough again but no check engine light. note: when i replaced the throttle body i noticed some liquid in the intake. i thought it was fuel and just soaked it up with a rag. could there be a leak somewhere? can coolant get into the intake? could it need a intake gasket or something? any help would be greatly appreciated.
Did you replace the runner control valve? And I recently got the suggestion to replace the whole intake manifold too. So yea these engines are special. The CVT Transmission is a pain as well. Wont do another cvt again. Whines too much
Im trying to find a video how to remove the valve bady but i cant find one maybe im writing it wrong or something but this video help me on a jeep patriot..
Good video thanks man, I was trying to check my pcv valve and I broke the hose, do you know if I have to remove all the intake manifold to replace the pcv hose?
theres a backorder of 5 month on intake manifolds mine is cracked, i went to my mechanic and he quoted me 900 for the manifold and 120 to labour, cost, he ordered it from damier christler so i figured id call and order one, so the price was 425$ and my mechanic price was 900$ i figured mechanics get better rates hmm? well now i know where not to go , my mechanic was going to pocket 500$ and he made it look like he was the nice guy and we both ordered it from the same company wich has a 5 month back order,. now if you go on ebay they sell them new for 150$ it dosnt need to be the exact code as long as it fits with the car you specified
10:58 "These are very delicate. I repeat very delicate!" (he throws it down) 🤣
Off camera. Deny it ever happened :)
This is the BEST video for this type of removal! WOW you helped me 100% to make up my mine to remove and replace the intake manifold for my mom's jeep. Mom just got back from the Jeep Dealers Garage. They said she needs the intake manifold fold replaced? I've never heard of that the intake manifold going?? Has anyone heard of that? They said it was going to cost her just over $900.00 to replace parts and labor ! I told her I would go to the auto wreckers and take one out and replace it myself, this video changed my mind to even attempt to do it. So I told mom to get the estimate and find somewhere cheaper to do it. So she did and they wanted $540.. parts and labor. Those dealers are such a rip off! But seriously is even possible for the intake manifold to go?
Just a tip, before starting jon. Pull fuel pump fuse and start car a couple of times so you can relieve the pressure in gas line
I don't believe there is a fuel pump fuse for this vehicle. The Haynes manual tells you to take off the back seat and disconnect the fuel pump manually.
I actually just took the gas cap off. I think that relieved the pressure.
5 years later video still helpful 👏 thanks man
Thanks so much for the video man, definitely helpful for us DIY guys.
I'm the original owner of an '09 Sebring 2.4L, with over 262k on my car, it might be time for me to do this. Oh and you're throttle body replacement video is great as well, doing that tomorrow while corona virus has me on lockdown 😆
Thanks for the video. Btw you’re supposed to disconnect the battery before you do any work on the engine
Thanks!
Its really hard to find videos about jeep compass engines. Thanks for being brave doing it yourself and sharing! There were just safety issues that should have been taken in consideration. But overall, thanks for the hard work!
jeep compass manifold are impossible to find there are over 2000 on back order for the manifold, and iv been waitinf 6 months now, they keep moving the month forward, i have been driving with a cracked intake manifold for 5 months im getting worried it might damage something
If you take that manifold off you need to replace the gasket otherwise it will leak its not meant to be reused although it may look ok Its not expensive so dont risk it Its not worth it to do all that work over again
I need to take off my intake manifold exactly for that reason it’s leaking air.
Gotta love those tabbed connectors 🤦🏻♂️ I can't tell you how many pigtails I've spliced because the clips break when you remove them! It made me quick with soldering though! I learned the NASA method of doing it. If it's good enough for space, it's good enough for me!
⁰⁰⁰⁰⁰⁰⁰
Thank you needed this to get to the oil sensor
Love the video.... my wife has a 2016 jeep compass latitude 2.4 I've changed every gasket except the head and intake manifold about to do the manifold hers has the 6f24 automatic transmission I serviced it.. it was a pain so I replaced the transmission hoses with 200 psi clear hoses so if I wanna check the fluid to see if its good( as far as color) I just look at the hoses😂😂
nice work buzzin. thanks for the video.
The pcv valve is very easy to over tighten and break SUPER EASY 17.99 for a replacement at autozone
I think you meant PCV. Thanks for the video, good tips
thank u cuz jus like u said i couldn’t find a video
Torque specs...? (Not having a trusty Hanyes/Chiltons manual for this '07 Caliber I bought is the bane of my existence!)
Did you have to put any sealant when you had to reinstall it back . I had one put on my Dodge Caliber and it’s still leaking oil into the intake manifold.
Do you need to prime the fuel rail before you try starting the car? Or just let her rip and let the air work it’s way out?
Thank you very much. I search a Long Time for a good Video Like this
Thanks Bro, Have a nice day
Thanks for the excellent video! I'm curious if everything went well with no problems after this repair? Also, where did you get the manifold?
Did u have to relearn the throttle body when placed in the new intake manifold?
please help. i have a 2011 jeep compass 2.4 with the cvt trans. the car was running rough at times, no codes. after a couple months had a code that said throttle body was bad. i replaced the throttle body and check engine light went out and the car ran great. after a couple days the car started running rough again but no check engine light. note: when i replaced the throttle body i noticed some liquid in the intake. i thought it was fuel and just soaked it up with a rag. could there be a leak somewhere? can coolant get into the intake? could it need a intake gasket or something? any help would be greatly appreciated.
Did you replace the runner control valve? And I recently got the suggestion to replace the whole intake manifold too. So yea these engines are special. The CVT Transmission is a pain as well. Wont do another cvt again. Whines too much
Ever figure this out?
@BEN COLLINS how did it turn out? Any luck?
it's probably oil in the intake. I know mine does that.
I love the countless people with problems who never come back to post an answer to their problem. Did you sell the dang car?
How long did it take you to complete the replacement
Im trying to find a video how to remove the valve bady but i cant find one maybe im writing it wrong or something but this video help me on a jeep patriot..
Will swapping a intake manifold from a Dodge Avenger work with a patriot even if the avenger wasn’t 4 wheel drive?
Yes as long as they're the same engine.
yeah have something to do on my day off, thanks
why did you need to change the intake gasket in the first place?
I have to repair my because of a high pressure vacuum leak
Good video thanks man, I was trying to check my pcv valve and I broke the hose, do you know if I have to remove all the intake manifold to replace the pcv hose?
If you cant take it out with the valve cover on then you gotta replace the whole valve cover. Its sealed from the inside right where the PCV is.
From what i could tell, you did a few unnecessary steps. I was able to squeeze the intake manifold by just pushing the wiring harness up a bit lmao
To take the manifold ..u need Rotate the manifold 180degrees
Thank you
It looks exactly the same as a 2007 Chrysler Sebring 2.4 cylinder.
Where is the Schrader valve located on this vehicle?
For?
@@carloslara7452 For releasing fuel pressure prior to removing the rail like one is supposed to...
Thank you good video
Tools needed in a list would be great
They really need to find something better than those red tabs I can count how many I've broken or lost
theres a backorder of 5 month on intake manifolds mine is cracked, i went to my mechanic and he quoted me 900 for the manifold and 120 to labour, cost, he ordered it from damier christler so i figured id call and order one, so the price was 425$ and my mechanic price was 900$ i figured mechanics get better rates hmm? well now i know where not to go , my mechanic was going to pocket 500$ and he made it look like he was the nice guy and we both ordered it from the same company wich has a 5 month back order,. now if you go on ebay they sell them new for 150$ it dosnt need to be the exact code as long as it fits with the car you specified
STOP EVERYTHING!!
Clean that engine first before attempting any kind of repair.
They are known for dried up intake gaskets
Love the Mutha comment
Man, you lessons on to use a camera. Your making me dizzy!
and dodge caliber .
Fuck that , 😒