Yes I'd love to see the other build bc it's amazing how fast you all can build a cage and put it together so easy. You all are becoming professional in the roll cage building
Awsome job Can Am Crew...!! Jesse you do great work love these videos... would like 2 see the can am cage... man watch that back ... I know.. when I'm in the market i would love 4 u to do a cage an a build for my 22xrc..!!
Awesome build turned out nice…. Heck yes with the xrc build. We went to Rugged Mountain Ranch last weekend in Daisy Oklahoma that would have been right up your alley of technical adventures. I thought about y’all and how you would have challenged every trail. Some of the roughest I’ve been in
That cage came out freaking sweet😗 I think the exo-skeleton cage make the machines look tough. You guys are badass. Yes I'd like to see another build for sure👍Love it.
Definitely wanna see can am cage build too, and some more info about your tubing bender. And I’d be interested in buyin that windshield if they plan on selling it.
seeing that RC outside reminding me of my base RC lol. she is getting a new long block motor swapped in due to a water pump drive gear failure. 50 dollar plastic gears cost me a 6700 dollar shop bill. so x3 owners if possible id replace your thermostat and water pump drive gears regularly. a couple hundred dollar shop bill beats nearly 7k.i seen that it was overheating when it went into limp mode but it was too late and the damage was done. just keep it in mind, the x3 motors are tough but heat will kill them.
Bout time you stepped over to the dark side and worked on a fun mobile 😂😂😂. Pretty sure I wouldn't want Scott and his bad juju inside ours until he gets rid of that evil helmet 😂😂😂😂. And yes, you discovered why I'm always telling KRX people to use harnesses. Even snuggly harnessed in you can lean outside the plane between the A and B pillar. Those stock seatbelts should be outlawed. Off my soap box, time to find Scott's unicorn and rainbow helmet.
Should of taken a bar straight across behind the seats for structural amd harness applications But other then that excellent work!!!!!! Definitely do a video on the can am. You have me thinking about having my cage redon on my pro as a chop top
With spring coming hoping to see you guys start hitting places out in the NE area like your local PA outlaw trails. Or maybe NY outlaw trails (if they have any good trails) obviously NY state not the city. Can you tell I like outlaw trails lol. Also did you guys get Scotts machine fixed since 77?
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [TEASER MV]](http://i.ytimg.com/vi/VC689EgdSIw/mqdefault.jpg)
Yes I'd love to see the other build bc it's amazing how fast you all can build a cage and put it together so easy. You all are becoming professional in the roll cage building
👊🏻👊🏻 hell ya. Thanks
Looks good. Let’s see all the cage builds
Yes please, that is a great looking cage . You are very talented, your unique designs are cool. Please video the can am build.
Another great job. Definitely film the X3 cage build. 🤙
Will do. Thanks.
Nice job as always. Let's see the Can-Am cage build.
🤙🏻🤙🏻
Looks nice!!! Definitely want to see the XRC build!
Oh yea…definitely film the other X3 cage build. It’s solid content, not just filler for contents sake. Keep up the good work.
Well done. If lived close to you, I would have you build a cage for mine.
never seen anyone use a teryx bumper on a krx, actually looks good
Let's see the other cage build , krx cage looks awesome 👌
Thanks for sharing
😎🙏🇺🇲
Yes please, X3 cage build!!!! Would love to see the exo build! Great work on the KRX
Personally I like watching the cage builds. It’s good inspiration for when I get mine made.
would love to see x3 build i plan on doing a full exo also
Wow you guys are super talented, what a beautiful job. Wow so cool!
Thank you. We greatly appreciate that.
OH MY !! I love KRX stuff and that cage is SWEET !
Thank you.
Looks awesome, yes on the canam build
Very good craftsmanship
Thank you.
Yes would like to see the x3 build
Shop fab vids are awesome as well, keep em coming!
👊🏻👊🏻
Definitely interested in seeing the XRC cage build!
Awesome build and yes let’s see the rc build
For sure! I’d love to see another build! I’m going too be working on a rear cage for my commander soon.
Yes more cage videos please. Showcase those mad skills!
🤙🏻👊🏻
Nice. I talked to you on here about doing a krx cage when you did the can am cages. I knew you guys would kill it👍🏻👍🏻 too bad I’m 10 hours away
Heck yeah looks amazing. Can am cage for sure
The cage turned out awesome I like watching builds like this you do awesome videos
Awesome thanks.
Y’all got some skills. What a bad a?? cage. I would definitely like to see the cage build on the RC👍🏻
Good Job Crew 👊🏻
Thank you 👊🏻🤙🏻
Fantastic looking cage. Keep filming to build ur cage business.
Yep another awesome cage finished. Keep building for the channel! Love all your work!
Definitely want to see the next build. This was awesome.
Great build on the KRX cage !!!! Definitely want to see a video on the X3 cage build.
Awesome job! Definitely want to see every build that you guys do.
great job yes like these videos
You guys are super talented Jesse! That KRX cage was ridiculously amazing
Thank you. I appreciate that.
Looks awesome Jesse!!!!!! I would like to see you guys build the other cage!!! Nice Job!!!
Looks great guys. Nice job.
Awsome job Can Am Crew...!! Jesse you do great work love these videos... would like 2 see the can am cage... man watch that back ... I know.. when I'm in the market i would love 4 u to do a cage an a build for my 22xrc..!!
We would love too. Thank you.
Another great build😉 Definitely want to see the next one👍🏽👊🏽
Nice cage build brother 👍 👍
Awesome job.ill watch any build u do
Thank you 👊🏻👊🏻
Want to see the Canam blue/black build.
Vary nice job you two, Great work and looks good!
Have to say u guys are doing a hell of a job on the cages
Thank you. We appreciate that.
Awesome job!!! That build looks so good. If it was mine, I may have had you add tabs for some whips or pods off the back.
nice job looks great
Cage turned out great,awsome job guys.
Thank you 👊🏻👊🏻
You two make a nice-looking cage. I'd bring my XJ by for some work if you weren't a few states away. Keep up the good fight.
Yes video the can am cage build
Love seeing any video y'all post!
🤙🏻👊🏻 thank you!
Awesome build turned out nice…. Heck yes with the xrc build. We went to Rugged Mountain Ranch last weekend in Daisy Oklahoma that would have been right up your alley of technical adventures. I thought about y’all and how you would have challenged every trail. Some of the roughest I’ve been in
We will have to look in to it.
That cage came out freaking sweet😗 I think the exo-skeleton cage make the machines look tough. You guys are badass. Yes I'd like to see another build for sure👍Love it.
Awesome 👊🏻👊🏻
Great job Jesse an Sheri. Looks awesome 🤩
Great job! Would love to see the X3 build!
Definitely wanna see can am cage build too, and some more info about your tubing bender. And I’d be interested in buyin that windshield if they plan on selling it.
nice job! Big improvement over stock!!
Phenomenal job! 🤙 yes keep more content like this going. I dig the mix!
Looks great , you do some pretty nice work .
Thank you 🤙🏻
Awesome work!!!!
Man what a great cage build!!
Awesome job. You do excellent work.
Nice work bud! 👍
Looks great nice work
seeing that RC outside reminding me of my base RC lol. she is getting a new long block motor swapped in due to a water pump drive gear failure. 50 dollar plastic gears cost me a 6700 dollar shop bill. so x3 owners if possible id replace your thermostat and water pump drive gears regularly. a couple hundred dollar shop bill beats nearly 7k.i seen that it was overheating when it went into limp mode but it was too late and the damage was done. just keep it in mind, the x3 motors are tough but heat will kill them.
Loving the build videos! Great job! Makes me want a cage on mine. Yamaha x2. We don’t ride like yinz but the extra safety factor would be nice.
Great job
turned out sweet!!
Thank you.
Looks awesome!
ID LIKE TO SEE THE CAN AM BUILD
Yes I want to see the x3 exo
Awesome job keep the builds coming really enjoy the channel
Thank you. 🤙🏻👊🏻
yes show it
Bout time you stepped over to the dark side and worked on a fun mobile 😂😂😂. Pretty sure I wouldn't want Scott and his bad juju inside ours until he gets rid of that evil helmet 😂😂😂😂. And yes, you discovered why I'm always telling KRX people to use harnesses. Even snuggly harnessed in you can lean outside the plane between the A and B pillar. Those stock seatbelts should be outlawed. Off my soap box, time to find Scott's unicorn and rainbow helmet.
Should of taken a bar straight across behind the seats for structural amd harness applications But other then that excellent work!!!!!! Definitely do a video on the can am. You have me thinking about having my cage redon on my pro as a chop top
I want to see the X3 build please
Nice. Great video yall 💯 👍
Thanks bud. I see you tackled 100 again. Did you film it.
@The Can Am Crew yes sir made the legde with no problem but the slick rock had to winch 💯😎
Looks great. What’s something like that cost?
Really depends on how elaborate you want to get, just a cage or exo style front and rear bumper cage. Anywhere from 1500 to 3500.00
That is sick nice job
Thanks 👊🏻👊🏻
With spring coming hoping to see you guys start hitting places out in the NE area like your local PA outlaw trails. Or maybe NY outlaw trails (if they have any good trails) obviously NY state not the city. Can you tell I like outlaw trails lol. Also did you guys get Scotts machine fixed since 77?
Yes, we threw in another axle and it’s ready for more.
Did I miss it? How did you radius the top bars?
I take them to a local shop and use their machine to radius the tubes.
@@TheCanAmCrew Gotcha! Turned out really cool.
Awesome! Did the new krx cage deduct any height from stock?
Thank you. yes, it took about 6-7 inches off the height
@The Can Am Crew that's awesome! Do you guys sell these or just do them for friends?
@@NicktheStumpGuy we are selling them now. We have a few on our website.
I sent my krx trail packing heavy slow hard to tune . Got a x3
Awesome. I couldn’t be happier with my x3.
I need one made for my krx where are you located and a rough price on A KRX
We are in Hollidaysburg pa and this cage will run you around 3000.
kawasaki seems to like bolts lol
How much for one? I need one for my Krx . Lol I like the cage looks good.
For one like in this video you’d be looking by at around 2500 or so depending on front and rear bumpers.
What does a cage cost to build for rzr xp 1000 2 seat
Send me an email with what your looking for and we can discuss price.
Genius 👍👍👏🏻👏🏻
Do you build rock sliders
I haven’t but I can.
@@TheCanAmCrew how much do think 2023 turbo r
@@skeim5620 I would have to see pictures or a style you would want them to look like. I would also need the machine here to build off of.
@@TheCanAmCrew like the orb ones
I want you to do one for my krx 4 seater
Let me know when and we can get you scheduled in
Looks awesome!!