Gracias. I had disassembled mine to resolve a problem with misses on 2 inch nails. I got it apart by visual but not properly and had parts spring everywhere. Gratefully I found this. Lifesaver.
Thanks for the great instructional vid! Very easy to follow! I just picked one of these guns up for 50 bucks and have the two rebuild kits you used in the video coming in the mail. The gun has been scrubbed and after about 100 bucks all in and a better understanding of the inner workings, Hopefully I will have myself a dependable shooting gun! Thanks again!...Ben
Thanks for the video. Best one I came across. You helped me a lot. My F350S is back to fully functional. I did use the silicone grease. I really appreciate you sharing your time and talent.
I like it too. But around here all the framers run Hitachi. I bought one a few years ago and it broke half way into a box of nails. Returned it and they gave me a new one. It's still sitting in the box.
@YH Wei Thanks for watching! Your comment sent me to Google in a hurry. You are correct, Silicone is the safe bet. However, it looks like the lithium grease will be OK. I will keep an eye on the gun and post up any problems I have with the grease. At least I will know how to rebuild it next time, and it was pretty cheap.
Mine shoots just by pressing the trigger with out bumping it will literally shoot in the air so I went out and got a new one any ideas of what’s wrong with my old one
Great job! Thank you for the video it was easy to follow. 1 question though what would cause the nailer to double fire, so instead of one nail going in 2 go in at the same place? Thanks in advance!
I used: www.amazon.com/Lucas-Oil-10533-Lithium-Grease/dp/B004X70LZA But some guys recommend, and I think they are right: www.amazon.com/Super-Lube-41160-Synthetic-Translucent/dp/B0083R1FME
Followed this, another video and the package instructions to a T and I'm still leaking air out of the orange cap (out of the exhaust) it will however shoot a nail for a brief time before the pressure is gone. Anyone have any ideas?
I didn't, looks like I'll try that thanks. When I pulled it apart, I immediately saw several o rings and seals destroyed. Didn't think about the trigger being shot. Thanks.
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
Gracias. I had disassembled mine to resolve a problem with misses on 2 inch nails. I got it apart by visual but not properly and had parts spring everywhere. Gratefully I found this. Lifesaver.
Out of the five videos I watched yours was by far the best. Thanks for sharing.
Thanks for your help I really appreciate it
Thanks for the great instructional vid! Very easy to follow! I just picked one of these guns up for 50 bucks and have the two rebuild kits you used in the video coming in the mail. The gun has been scrubbed and after about 100 bucks all in and a better understanding of the inner workings, Hopefully I will have myself a dependable shooting gun! Thanks again!...Ben
Thanks for the video. Best one I came across. You helped me a lot. My F350S is back to fully functional. I did use the silicone grease. I really appreciate you sharing your time and talent.
Great to hear!
jake - excellent video. informative with how & where to buy which parts. invaluable. nothing like getting work tools to work as they should.
Excellent video Jake. The best grease i found was a Dielectric Grease. The temperature range and recommendation for "O" rings was my go to choice.
Thanks for the video I’m going to rebuild mine.. I love the gun, used just about all of them but this is my favorite 😊👍
I like it too. But around here all the framers run Hitachi. I bought one a few years ago and it broke half way into a box of nails. Returned it and they gave me a new one. It's still sitting in the box.
Great video. I used the same kit but have a big leak now after reassembling it though....
excellent video Jake !
but hell you're worse with a torque wrench than me !!!
and I didn't think that was possible !!!
all the best man !!!
great video, my 350s works like a charm now!
@YH Wei
Thanks for watching! Your comment sent me to Google in a hurry. You are correct, Silicone is the safe bet. However, it looks like the lithium grease will be OK. I will keep an eye on the gun and post up any problems I have with the grease. At least I will know how to rebuild it next time, and it was pretty cheap.
Jake Belk yea silicon grease is the best.
dielectric grease is silicone grease for electronic stuff same stuff tho.
Awesome video. Can you link the rebuild kits?
You make look so easy 😆
muy bien todo un profesional felicidades
Mine shoots just by pressing the trigger with out bumping it will literally shoot in the air so I went out and got a new one any ideas of what’s wrong with my old one
Great job! Thank you for the video it was easy to follow. 1 question though what would cause the nailer to double fire, so instead of one nail going in 2 go in at the same place? Thanks in advance!
Sounds like the trigger spring might be bad
@@publicprofile1 Thank you! I will replace it as well. Keep up the good work.
If the gasket is still leaking air tiny bit, is it ok to use some kind of gasket seal (not permanently) ?
Can you tell me when can i
Buy a spring for my trigger!?
Please
why did you grease the check valve????? i did it on mine and it skips
accidentally Im used cordless oil in my pneumatic f350s gun and now shoot 1 yes and 2 not. Do you thing that is the reason why? thank you.
Thank you! What kind of grease are you using on the rings?
I used:
www.amazon.com/Lucas-Oil-10533-Lithium-Grease/dp/B004X70LZA
But some guys recommend, and I think they are right:
www.amazon.com/Super-Lube-41160-Synthetic-Translucent/dp/B0083R1FME
Just bought a gun off ebay and get air from trigger and no shot. Safe to assume its trigger assembly?
Take it apart and clean it first.
Followed this, another video and the package instructions to a T and I'm still leaking air out of the orange cap (out of the exhaust) it will however shoot a nail for a brief time before the pressure is gone. Anyone have any ideas?
Did you replace the trigger valve?
I didn't, looks like I'll try that thanks.
When I pulled it apart, I immediately saw several o rings and seals destroyed. Didn't think about the trigger being shot. Thanks.
@@bigdawgfan72 did the trigger kit work?
To far from the work to be of any help.