How to Make a Stamped Ring | Jewelry 101
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- In this episode of Jewelry 101, Susan shows you how to make a stamped ring when making rings at home. You can buy supplies like those used in this video below:
Antiqued Stamped Enamel Marker:
www.jtv.com/pr...
Impressart® Arcadia Uppercase Letter Stamp Kit:
www.jtv.com/pr...
ImpressArt® Ergo Angle ™ Metal Stamping Hammer:
www.jtv.com/pr...
ImpressArt® Large Steel Stamping Block appx 4x4":
www.jtv.com/pr...
16 Gauge Sterling Silver Wire Strip:
www.jtv.com/pr...
Designer Chasing Hammer:
www.jtv.com/pr...
Flush Cutters:
www.jtv.com/pr...
Flat Nose Pliers:
www.jtv.com/pr...
Stay tuned for new episodes on jewelry making every Wednesday, here on Jewel School!
Website: www.jtv.com/
Facebook: / jewelschool
Instagram: / jtv
I really wanna see how you solder that gem into your ring 😅
Thank you for the video. Please consider turning off the music while you’re speaking. It’s quite distracting.
Can you please show the jewelry you are making BEFORE you start?
Yes, please
Please please please post a tutorial of how to solder gems/ stones into metal stamped jewelry!! I’m wanting to learn to solder turquoise stones onto my rings and bracelets!
One more reason for only filing on the forward stroke is because filing in both directions can reduce the life of your file, this may be less noticeable when working softer metals, but it's still true.
Since you structured and stamped your piece before you formed it into a ring it will be workhardened and difficult to form. Annealing could help there. Plus, it is not true that you only get a good impression with one heavy blow. It is also possible to use several quick sharp blows in succession AND if your impression is not deep enough the stamp can be replaced and used again. It is just a matter of doing it carefully and with feeling.
Do you use half hard material or dead soft?? What would be recommended??
Great tutorial but soooooo hard to see the detail you are making some close up footage would be great. Thank you 😊 🇬🇧
Love love love this! How did you add the gemstone to the ring you are wearing?
Hi . I liked everything you doing. That want I like to learning more. I have ready some stuff. I liked the ring with the blue stone . Is beautiful. How I can't to make that one . Thanks. I live Florida united state.
The best teacher ever!
I enjoy watching your youtube videos. And hope to one day be able to do these kind of things with jewelry. 😄🥰🥰🥰😍😍😘😘😘😉😉😉☺️☺️
Love, love, love your tutorials!
Thank you, Kathy!
How much was the metal you used?
This is a .925 sterling silver flat wire that is about 5mm across. We are only carrying 21ga flat wire at this time, which really is too soft for this project. Online sale searches yielded some good results on finding flat wire. Most seemed to be in the $40 to $50 range for a section. Keep in mind, sterling silver will be more expensive than a coated wire. For this particular project, you will want to use .925 sterling simply because when a wire with coating is hammered or stamped, it can come off revealing the metal underneath, which is usually copper.
Where do you get your flat metal to make the ring?
You can get it from several online stores like riogrande.com, or Ebay, even Esty.
Thank you for another great job at teaching us. You always show me how to start doing these things and I’m not scared to try .
I love, i will make one for each of my twins for their birthdays as they love rings mlm
Does it have to be expensive metal?
You know they do sell ring blanks
Where did you get your letter kit
21.99 for a premium 36 piece upper case set with free shipping..item #152917866426 just copy and paste in ebays search bar. This is just one example of the many sets you can find including tools and wire, ring blanks, etc..for great prices. Hope this helps.
How to make that prong set gem bypass ring you’re wearing??
And what number is that file?
Thanks for the tutorial, I have some metal and I needed a gift idea for the holidays😀
I don't know how you can make jewelry with long nails. Also, it would be nice if you can zoom in on your camera when you're making your itms.
Alguien sabe a donde puedo conseguir ese metal con el que hizo el anillo? He buscado en Amazon pero no se cual es porque hay uno que lo usan para hacer mascarillas, no se si es el mismo
I tend to make rings and necklaces… i would like to study here in canada just in case I don’t know to speak English and i only understand a little
It was fun. Thanks
You make that jewelry making look so easy and simple hope to make it on day
Gotta say...how about showing the end product before you begin your lesson? Eye on the prize!!!
Great as always! Have to try it! You are a wonderful teacher! Thanks as always!
I really like these ring you did just now
Great video. Thank you for sharing and emphasizing supplies needed.
Thank you I hope to try that soon I don't have the block yet!
Hello! What diameter wrap pliers are you using. There are a few options on Amazon but I did not see a link in the description. Thank you!
Hi Cortney! This "wrap and tap" plier has three sizes on the barrel, which are 13mm, 16mm and 20mm. JTV, unfortunately is sold out of this plier at the moment, but a quick internet search should yield some affordable results! We really hopes this helps!
Absolutley love your videos! Any suggestions on how to make a roller ball necklace such as metal Working the cap !??
What do I use to solder hafe silver ring needing the other hafe
I love your videos!! Could u do a tutorial for Necklace chains, please??
You are very good at teaching! Do you teach classes? I’m very interested
Just here on TH-cam! 😃
I love this!!! Thank you.
Hi, great video! . Question, is the chasing hammer optional to use? like when making these rings, do you have to use the chasing hammer? Thank you again for this tutorial.
Hi Nakaya! For this particular project, the chasing hammer is important in order to spread out the ends for the stamping. You can skip the texturing if you want. If you're not going to stamp your ring, then just make sure still you file down those sharp edges. Good luck!
Hi Susan I ha e been making this type of ring using IA aluminum but want sterling. In the kit it has 16ga wire where can I get the flat sterling you used?
Hi! Here is a link to some Argentium sheet metal that could be used from JTV, check it out here: www.jtv.com/search/?Ntt=argentium+sheet&type=products&N=4243964577&Ntk=All
Can you advise of the flat file that you used in this vid? I am new to metals and I think I might need a file like the one you demonstrate. TIA
Hi! This flat file is made by eurotool. A quick internet search should get you to it. We hope to have some back in stock soon!
What is the tool that makes the rings into a perfect circle? Cant find it anywhere, help please!
Hi Christy! It's called a ring mandrel. Here is a link for you! www.jtv.com/product/hard-chromed-ring-mandrel-sizes-1-15/JST719?mcid=XSOjsyt
could you maybe please tell us good places to get the equipment used from?
Hi Rona! Here is a link to our current stamping tools!
www.jtv.com/search/?Ntt=stamp&type=products&N=4243964577&Ntk=All?mcid=XSOjsyt
excellent job
Thank you!
Where do you get the silver and other blanks?
Hi! We are sold out of the 16ga flat wire, but a quick internet search will yield some good results! Here is a link to some metal blanks for you: www.jtv.com/search/?Ntt=blanks&type=products&N=4243964577&Ntk=All?mcid=XSOjsyt
Nice job. The ring is so cute. Thank you
Whats the name of the tools for making a ring?
Here are the names and the links for most of the supplies used in this video:
Antiqued Stamped Enamel Marker: www.jtv.com/product/impressart-r-antiqued-stamp-enamel-marker-in-black/JST834?mcid=XSOjsyt
Impressart® Arcadia Uppercase Letter Stamp Kit: www.jtv.com/product/impressart-r-arcadia-uppercase-letter-stamp-kit/JST821?mcid=XSOjsyt
ImpressArt® Ergo Angle ™ Metal Stamping Hammer: www.jtv.com/product/impressart-r-ergo-angle-tm-metal-stamping-hammer/JST696?mcid=XSOjsyt
ImpressArt® Large Steel Stamping Block appx 4x4": www.jtv.com/product/impressart-r-large-steel-stamping-block-appx-4x4-/JST794?mcid=XSOjsyt
16 Gauge Sterling Silver Wire Strip: www.jtv.com/product/16-gauge-sterling-silver-wire-strip-6-inches-long-by-5mm-wide-by-1mm-thick/JSWR176?mcid=XSOjsyt
Designer Chasing Hammer: www.jtv.com/product/jewel-school-r-dome-faced-chasing-hammer-25mm/JSPLT09?mcid=XSOjsyt
Flush Cutters: www.jtv.com/product/designer-semi-flush-cutter-induction-treated-for-cutting-316l-stainless-steel-ergonomic-handles/JSKIT0443?mcid=XSOjsyt
Flat Nose Pliers: www.jtv.com/product/two-k-german-4-1-2-flat-nose-pliers/PLIER129?mcid=XSOjsyt
Ring Mandrel: www.jtv.com/product/hard-chromed-ring-mandrel-sizes-1-15/JST719?mcid=XSOjsyt
Oh my gosh!! Thanks you SO SO SO much!!!
What size stamps are these? 6mm? 3mm?
Hi Rhiannon! The 16ga metal sheet Susan used is 5mm wide, so she used a slightly smaller stamp at 3 or 4mm. Here is a link to all of our available stamping tools and good luck!
www.jtv.com/search/?Ntt=stamps&type=products&N=4243964577&Ntk=All?mcid=XSOjsyt
Stamp size please
Hi! This is the Impressart® Arcadia Uppercase Letter Stamp Kit with Appx 3mm Stamps. www.jtv.com/product/impressart-r-arcadia-uppercase-letter-stamp-kit/JST821?mcid=XSOjsyt
Thank you, you make it so easy!
Great job
Love love LOVE it!
where did you get the ring sizer at? 🙂
This is a stepped wrap-n-tap plier. Susan is using one with larger steps at apx 13, 16 and 20mm. A quick internet search should get you to one. Here is one from Jewel School that is a 9mm through 2mm: www.jtv.com/product/stepped-bail-making-pliers-makes-6-different-loop-sizes-9mm-8mm-6mm-5mm-3mm-and-2mm/JSKIT0925?mcid=XSOjsyt
@@JewelSchool thank you!!
It's called wrap around not bypass