Anybody doing this seriously should invest in a small spot welder. They start at $9 and i recently bought a $24 one which does everything. You need it for strength, better connections, resistance to heat, etc. There is no excuse to not buy one.
Yesss!! I'm lovin' it! That charging boards are very clever and durable. I have two of such DIY cases with exact this board. The power of the DIY cases will be, that the Li-Ion cells has not need to be soldered because there are to be installed as same as you install AA or AAA alkaline batterys in a TV IR remote f. e. So i become able to change the cells easy and quickly every day when i want. 😊 Best DIY Powerbank board since ten years. Never seen similar that is better or can more than this one.
My one friend used ltihuims to build himself a new 12 v battery . Cant remeber for what project. He also used bms as well. To someone that doesnt know and pay attention. It will look like the normal 12v type of batteries commonly used in house alarms and gate motors. Yet the battery is now lighter in weight and its more effecient than before.
You can buy boxes designed to hold multiple batteries and have brackets, connrcting strips, pcb mounts, etc. Nice plus inexpensive. They make your work look very professional. Invest in one.
There we will be a maximum, based on current capacity of output wires plus the most cells the charger can handle. But with bigger batteries, thicker wires, and heavier charger, you can scale upwards elmost endlessly.
Can. I charge my phone with one cell only ?? It charges for 10 seconds only then stops charging and the screen and give that my battery is 0% Despite that if I put a led USB light or used the internal light , it operates fine
@@TARIQLAB I measured it, it was 4.1 as volt If the mAh is small, at least it should last for 3 or 4 min ... At the same time I am charging a normal phone not big one device.
Anybody doing this seriously should invest in a small spot welder. They start at $9 and i recently bought a $24 one which does everything. You need it for strength, better connections, resistance to heat, etc. There is no excuse to not buy one.
Plus heat harms your batteries. I repair battery packs and wouldn't consider solder as a fix. Not even temporarily.
Yesss!! I'm lovin' it! That charging boards are very clever and durable. I have two of such DIY cases with exact this board. The power of the DIY cases will be, that the Li-Ion cells has not need to be soldered because there are to be installed as same as you install AA or AAA alkaline batterys in a TV IR remote f. e. So i become able to change the cells easy and quickly every day when i want. 😊 Best DIY Powerbank board since ten years. Never seen similar that is better or can more than this one.
Woah, these type of battery with parallel connection are better that enclosed power banks because, they are not expandable but these are!
Yes, but total capacity should be under power bank module limit
My one friend used ltihuims to build himself a new 12 v battery . Cant remeber for what project. He also used bms as well. To someone that doesnt know and pay attention. It will look like the normal 12v type of batteries commonly used in house alarms and gate motors. Yet the battery is now lighter in weight and its more effecient than before.
@@TARIQLABpls share 65w output power bank module details
Why aren't you using a little 12V spot welder for the battety connections? They start st $9 and there are multiple really good reasons to use them.
You harm the batteries with heat and can never get a great connection. Don't do this!
You can buy boxes designed to hold multiple batteries and have brackets, connrcting strips, pcb mounts, etc. Nice plus inexpensive. They make your work look very professional. Invest in one.
Merhaba Hocam ışıldak içinde bulunan (siyah dikdörtgen küçük)aküler ile bozulan 5000 mah lik powebank anakarti ile olur mu?
That is amazing 👍
Needed: 70 18650 cells, x3 powerbank modules, an LPG tube
2200 x 7 = 15400mah ??????😢
With 2800 cells which are extremely common, this is possible. Even 3200 cells are common
Im prefer use polymer battery
flash motherboard chip?
Please can you give me the link for the board u used here 😢
Bro, can this board charge 6 batteries 🔋in parallel (2+2-2+) 11.1V, or do i need 3S board
It can charge up to 8 batteries but in parallel, it is only for 3.7v not 11v
good idea
Thank you
Clean explain tion good job
Ty
@@TARIQLABfor this no need to add bms board,?
Sir parallel me agar ham bms na lagaye to v kam chal jayega kya ??
Lower Max current. Subtract 2.5A per battery if I'm not mistaken.
What's the song name?
how much ampier it generate and it support fast charging? or warp charging
10A, this is normal module, u can use fast charging capable module
Almost unlimited with heavier duty batteries charger's and wiring.
Bro powebank se ham 5v ka bulb jla skte hain na koi blast wlast to nhi hota na ?
Jala sakty hain
How many mah battery can added with a module. Is there any limits
Charging Capacity of this module is 10A so we can connect 8-10 batteries,
There we will be a maximum, based on current capacity of output wires plus the most cells the charger can handle.
But with bigger batteries, thicker wires, and heavier charger, you can scale upwards elmost endlessly.
Materials needed: 16 rechargeable dynamaxX AA batteries powerbank 3 port x2 modules
Those are not AA batteries, those are either 18650 or 21700 cells. Voltage is different
Ciao, potrei conoscere la sigla del cip?...grazie
Bro ye module ache se work karta he mtlb 4000 mah mobile ko full charge karlega
Karta hai , 10000 mAh ki capacity hai is ki
@@TARIQLABactually me dusra digital powerbank module order kiya tha but wo 20% charge karne ke baad band ho jata he
Amperes kam honge
@@TARIQLAB ok bro thanks but iske internal resistance ki vajjhe se ye jaldi battery ko down to nahi karega na
What is the board name
Power bank module 10A
good
What's the name of the board u used?
Power Bank Module 5V 3.7v battery 10A
How to circuit name.
3.7v battery 10A power bank module
Pcb board milega send karte or give me link online shopping
Online milta hai
Temu
How we can recharge this power Bank
With this module
Can. I charge my phone with one cell only ??
It charges for 10 seconds only then stops charging and the screen and give that my battery is 0%
Despite that if I put a led USB light or used the internal light , it operates fine
I think ur battery is weak
@@TARIQLAB I measured it, it was 4.1 as volt
If the mAh is small, at least it should last for 3 or 4 min ... At the same time I am charging a normal phone not big one device.
Board konsa hai
Power Bank module bro 4 volt 2 ampier
chargeing circuit please
He showed you, he's using a USB-C vharger, same as I would. They're roughly 4 for $10.
আরো বেশি করে দেন
❤️👍
Welcome ❤️
❤
♥️♥️
Sorry you don't know how dangerous is this. You don't have any protection either a BMS. Please do not try do this thing
I use power bank module which has built in 10A BMS
what is the name of board and type
Power Bank Module
Price kya hai
300-400
Слабая плата...
I like video your❤❤
Thank you ❤️
Hello bhai
Yes
Where is the cell balancer circuit?
Balancer required when batteries in series
Es que ! c est justifiée ! le nombre d accus ! pour recharge un téléphone !! voilà voilà
No need bms?
Need
How i can buy this power mobule help share me low price power module
Online, AliExpress, Banggood
Plz spare mension
Power bank module 10A
JMD 24
Ye Jo kit lgai hai iska name kya hai
mobile Power bank module
I see no plants but a weeping fig would be nice.
How can this simple 18650 cell be 2,857mah? 🤔
This can not be a 20,000mah powerbank 😐
Why, 1 lithium ion battery available in 2200, 2500, 3000 and 3500 mAH, multiple by 7
@@TARIQLAB I know. but this cells is not look like 3000mah...
Are you sure this is the original 3000 mah battery?
It's not 20k
@@utkarshsingh1223 but he mentioned it 20k mah.
@@Mukul_Adhikary Maybe 2800, then it's close to 20000 if they are new, but this aren't new cells.
Ya full change katna din ma hota ha😂
Kiyu bhai, ye module 10A ka hai 2-3 hour main full charyho jata hai
Micro USB se 10A 😂😂😂😂
Battery ke upar Jo lga hai uska name kya hai
Power Bank Module
Jis Patti pe solding kiye hai wire ko plus minus par
Nickel strip
Nickle wire hai bro 😊@@user-jz8nk2fu5j
CAN ANYONE RECOMMEND THE BEST MODULE FOR A 10,000mah Lipo battery ??🙏🏽🙏🏽🙏🏽🙏🏽
Вау это чудо чудесное😂
Idiot! It's ordinary electronics and not miraculous.