Everest is a good stabiliser. I brought 4KVA for 2200 in Amazon and installed it as the input for inverter UPS. Now my high voltage problem has been solved and my inverter is happy 😃
🤣U need stabiliser for inverter also? I have 900VA luminous inverter and having low voltage problems from past week till 170volts. No issue till now for me.
@@a.yashwanth your UPS inverter only do cut-off the power if the voltage go beyond the limits. I use stabiliser to boost or buck the voltage in 210-230 range even though the input voltage varies drastically.
@@RamakrishnanSRM why do you need stabilizer for your appliances connected to inverter? Common inverters are below 1KW so appliances that use < 1KW don't get damaged that much due to voltage fluctuations compared to heavy appliances like AC. And one very rarely connect AC to inverter. My inverter cuts off at 180V and starts using battery power. So I think it's not worth the money spent on stabilizer.
@@a.yashwanth I have 3 desktop computers. One of them will run 24x7. Also, the ceiling fans will run in full speed during low voltages because of stabiliser.
It was great vedio. I was checking for a stabulizer and has been checking . There were so many doubts, but your video has answered me . Thank you very much . Keep going . ALL THE BEST!!
Best video about stabilizer on entire youtube. Searching from 20min for video like this. I bet no one can find any other video better than this. But you can improve the video quality a littlebit by using a tripod or something that makes video stable.
Good one. Thanks for the information. I am buying a 4KVA double booster today in amazon. I am from Chennai and surprised to see same day delivery offered by Everest 👍
This double booster stabilizer only steps up the power by 40 volts and in my area power fluctuate wildly anywhere between 120 to 210 volts then should I go for triple booster stabilizer for my 1.5 ton non inverter AC, and a triple boost stabilizer steps up low voltage ⚡ of 130 volts by how much volts ?
Bhaiya 130v kitne volt se step up karta hai ? Mujhe lena hai 130 v se . Bluebird 150v liya woh 180 se 200 karta hai bas , 😢mera paisa kharab ho gaya bluebird lekar
As I post today, with 3 of these being used at my home, I have no issues at all. One of the stabiliser has voltage indicater which reads +15 volts always. Thats all, rest performance is very satisfying.
It’s leaking voltage in OP sir even when it’s stating “Lo” “hi” cut off. I don’t think it’s a good stablizer specially for inverter AC. What’s your take?
@@a.yashwanth that doesn’t make any sense if there’s voltage there’s current and inv PCB are really sensitive so even small current or voltage outside the range is questionable
maine ye hi stablizer purchase kiya h mera input 234 say 245 tak rehta h per stablizer kabhi kabhi output 199 ya fir 198 ka ho jata h jb ki stablizer pay 200 - 240 ka diya hua h kya ye thik h ya fir stablizer may koi problem h
Hi Hansraj, thank you very much for this video. Very useful, and I have got two from Everest for my new ACs. Can you do a review of their Everest ECC100? (or a similar one?).
Nope. You can set it up after opening the cabinet depending upon what you feel suits your needs but you can't reset it once the cabinet is closed from outside.
नया 4kVA 130 V-285 V Candes स्टेबलाइजर इनपुट 246 V और आउटपुट में बिना किसी लोड के 211 V आउटपुट देता है। 230 V के लगभग आउटपुट आना चाइए। 211V कुछ कम लग रहा है।क्या स्टेबलाइजर खराब है?
Only a servo stabilizer will provide you constant output voltage over a variable input range. These stabilizers are single/double or triple step based stabilizers and hence the output will not be fixed 230V. Your stabilizer may not be faulty at all.
Sir I have this same model stabiliser as soon as I connected it it shows Hi in display. But actually voltage at my house is normal and all other appliance are working fine. Do you think they gave me a faulty device? Is it possible to repair it at low cost or should I go for new one. Actually this was provided by the service centre in replacement of old stabiliser telling it is new one.
There is a 10k trim pot in the display card of the stabilizer used to calibrate the input and out put you can try changing it and re calibrate it it should work fine.. if still the problem remains the same then the relay is faulty...
I havent weighed it but its around 5 kgs. I think its copper, this I am saying based on the manufacturer claims and mimimsl heating with miniscule no load current consumption.
Its a loose term in indian context. It basically means that first step up to 230 volts will be from approx 160 V and the second step up will be from approx 190 V. Double step up is being termed as double boost.
With an input of 290V, the output is limited to 260V. Now, 260V itself is not safe for any normal home appliance. So, its acceptable to have auto cut with an input voltage of 290V.
This is how a review of stabilizer should be done. Great work🙏🏻👌🏻
Good review .keep posting other stabiliser reviews too.much appreciated
Everest is a good stabiliser. I brought 4KVA for 2200 in Amazon and installed it as the input for inverter UPS. Now my high voltage problem has been solved and my inverter is happy 😃
🤣U need stabiliser for inverter also? I have 900VA luminous inverter and having low voltage problems from past week till 170volts. No issue till now for me.
@@a.yashwanth your UPS inverter only do cut-off the power if the voltage go beyond the limits. I use stabiliser to boost or buck the voltage in 210-230 range even though the input voltage varies drastically.
@@RamakrishnanSRM why do you need stabilizer for your appliances connected to inverter? Common inverters are below 1KW so appliances that use < 1KW don't get damaged that much due to voltage fluctuations compared to heavy appliances like AC. And one very rarely connect AC to inverter.
My inverter cuts off at 180V and starts using battery power. So I think it's not worth the money spent on stabilizer.
@@a.yashwanth I have 3 desktop computers. One of them will run 24x7. Also, the ceiling fans will run in full speed during low voltages because of stabiliser.
@@RamakrishnanSRM wait. i forgot to mention that u can run the inverter in UPS mode. There is no need for stabilizer.
It was great vedio. I was checking for a stabulizer and has been checking . There were so many doubts, but your video has answered me . Thank you very much .
Keep going . ALL THE BEST!!
I have literally subscribed to your channel just by watching this video, good way to explain. You should have been my college professor though😂
Great great review sir
Apki hi jankari se log ab ye behichak lenge 🙏
Best video about stabilizer on entire youtube. Searching from 20min for video like this. I bet no one can find any other video better than this.
But you can improve the video quality a littlebit by using a tripod or something that makes video stable.
What happens when I connect output of one stabiliser to input of another stabiliser? Will the stabilization improve?
Good one. Thanks for the information. I am buying a 4KVA double booster today in amazon. I am from Chennai and surprised to see same day delivery offered by Everest 👍
Everest company is based out of Chennai
Amazingly well done engineer's review.
Thank you
The great practical review from your channel, I am happy...
This double booster stabilizer only steps up the power by 40 volts and in my area power fluctuate wildly anywhere between 120 to 210 volts then should I go for triple booster stabilizer for my 1.5 ton non inverter AC, and a triple boost stabilizer steps up low voltage ⚡ of 130 volts by how much volts ?
Did you get answer? I am facing same issue
238 volt ki input pe output kitna deta hai? and bucking kitna hai?(ac ki load pe )
Would you Sir please mention what's the Actual Weight in kgs of this Product?
Bhaiya 130v kitne volt se step up karta hai ? Mujhe lena hai 130 v se . Bluebird 150v liya woh 180 se 200 karta hai bas , 😢mera paisa kharab ho gaya bluebird lekar
Thank you ,Hansraj Bhatt for your review.
It would be more helpful ,if you can share your long term review based on your usage and observations.
As I post today, with 3 of these being used at my home, I have no issues at all. One of the stabiliser has voltage indicater which reads +15 volts always. Thats all, rest performance is very satisfying.
Sir,can i use this steplizer for 3hp motor?
You should do more reviews with other models
How is the performance of this stabilizer after 5-6 months is it working well now?
It’s leaking voltage in OP sir even when it’s stating “Lo” “hi” cut off. I don’t think it’s a good stablizer specially for inverter AC. What’s your take?
Did u measure it or u are talking about the measurement shown in video?
@@a.yashwanth talking about your video.
@@Elder650 Yeah. Not sure why he didnt clarify about that. Maybe it sends voltage but doesnt send any current.
@@a.yashwanth that doesn’t make any sense if there’s voltage there’s current and inv PCB are really sensitive so even small current or voltage outside the range is questionable
maine ye hi stablizer purchase kiya h mera input 234 say 245 tak rehta h per stablizer kabhi kabhi output 199 ya fir 198 ka ho jata h jb ki stablizer pay 200 - 240 ka diya hua h kya ye thik h ya fir stablizer may koi problem h
ab kesa h aap recommend krenge ise purchase krna mujhe chaiye 150 to 270/280 wala koi konsa lu
No 3 minutes time delay to protect the compressor?
This broke within 1 week..not sure what happened the digital light is not coming up
Very good review for knowledge
Ac ke sath Wall pr Lagane ke liye clip ya stand sath Ata h ya nahi .
Sir 0.8 ton ac ke liye konsa stablizer lena chayie please recommend
Ye 1 ton AC ke liye sahi rhega sir...
Can I use this stabilizer for servo drive of 1.5kw
I have monitored its performace till 2 KW and it does it without getting heated. Slightly warm, thats all.
Hi Hansraj, thank you very much for this video. Very useful, and I have got two from Everest for my new ACs. Can you do a review of their Everest ECC100? (or a similar one?).
Best one sir. Really it will help us in deciding whether to buy. Good review and pls keep it up 👍🏻
Great bhai ji, clean and informative review video 👍
Very informative and helpful
Copper or alluminium winding bro?
Awesome review with demo
Can I use this stabilizer for dharm Kanta weighment bridge
Excellent video
It's copper or aluminium?
Will this work for washing machine ??
Sir...Are Everest stabilizers good ? reliable.....?
Can we change when it bucks / boosts with the blue pot on the lcd board? I want bucking to start at 245v...
Nope. You can set it up after opening the cabinet depending upon what you feel suits your needs but you can't reset it once the cabinet is closed from outside.
@@hansrajbhatt I can't see any pot for adjustment, is it on the display board? Are there 2 of them or all are micro controller fixed in memory
@@hansrajbhatt yes i mean the pot insde the cabinet only. for me its ok if output voltage till 255v. i want to adjust hi cut..
नया 4kVA 130 V-285 V Candes स्टेबलाइजर इनपुट 246 V और आउटपुट में बिना किसी लोड के 211 V आउटपुट देता है। 230 V के लगभग आउटपुट आना चाइए। 211V कुछ कम लग रहा है।क्या स्टेबलाइजर खराब है?
Only a servo stabilizer will provide you constant output voltage over a variable input range. These stabilizers are single/double or triple step based stabilizers and hence the output will not be fixed 230V. Your stabilizer may not be faulty at all.
Hw you decrease and increase voltage sir
Copper or alluminium??
Sir I have this same model stabiliser as soon as I connected it it shows Hi in display. But actually voltage at my house is normal and all other appliance are working fine. Do you think they gave me a faulty device? Is it possible to repair it at low cost or should I go for new one. Actually this was provided by the service centre in replacement of old stabiliser telling it is new one.
There is a 10k trim pot in the display card of the stabilizer used to calibrate the input and out put you can try changing it and re calibrate it it should work fine.. if still the problem remains the same then the relay is faulty...
@@aayushgarg8759 thanks for your reply. Anyway I got rid of it and bought a v guard. Now AC working fine
better than vguard jiske most models me EI trasformer use hota hai jo heat aur sound dono generate karta hai.
Very nice
And thank you 🙏
Nice review... Can you able to do more review from the other competitors in the same voltage range as Vgurad, Microtech, Monitor stabilizers
I would love to, provided I get these stabilisers for review purpose. Personally, I dont intend to purchase anymore since I have sufficient right now.
Can we use it on main line
Copper or aluminum bhatav bhai
Yes same body make Donut stablizer....but not good. Makers in delhi...they are cheater
5 kVA wt 2 gems?? Is it correct??
Service all over india ?????
Can you please review candes crystal 490 stabilizer?
I dont have that model. If you provide me for review purpose, I would love to do that.
What's the weight approx and is it made up of copper winding?
I havent weighed it but its around 5 kgs. I think its copper, this I am saying based on the manufacturer claims and mimimsl heating with miniscule no load current consumption.
Thank you
Two in one working stablizer kaun sa haai 90 to 480 voltage ac and output 220 to 240 ac
The kind of range you are looking for will be very heavy and most probably will have to made custom built.
Can I use it for home use
Nice thanks for information
Is this I use as home server or it's really take load upto 5000w or is this good for me
Normally one shouldn't use a load greater than 50% of rating. Since this stabilizer is rated for 5 KVA, I would recommend max load of 2.5 kva.
wonderful review tha
product link plss
Very usefull video..
Thanks 😊
Sir es se ham refrigerator chla sakta h ya nhi
You can.
Is it 100% copper or aluminium?
I think its copper.
Good review
It's good or not for 1.5 ton ac
Yes, its good. You can go for it 👍
Minimum voltage adjest kiya ja skta h
I didn't try that. Can't say!!
Single phase ya double phase hai
Single.
Show me socket connection and range
Its in the video. You get to decide which socket you want to use 6 A or 15A. Though, 6A is not advisable unless you have very less load.
Bt hw to install it on the wall
Ders no holders oly to hld
Good one 👍🏻
Deep 300 display freedg 300 ka leya
Can I use it as Main line stabilizer?
Yes, you may. In fact I am using one fof the entire house without any power load and the second for AC.
@@hansrajbhatt which model stabilizer for home use...please specify....Very good technical review keep it up...I have subscribed your channel....
Double booster kya hota hai
Its a loose term in indian context. It basically means that first step up to 230 volts will be from approx 160 V and the second step up will be from approx 190 V. Double step up is being termed as double boost.
Kitni kb ka hai bhai
वर्किंग रेंस के हिसाब से तो यह काम ही नहीं कर रहा है मन इनपुट 150 से 290 है 260 पर यह कटऑफ पड़ जाता है
With an input of 290V, the output is limited to 260V. Now, 260V itself is not safe for any normal home appliance. So, its acceptable to have auto cut with an input voltage of 290V.
Hi,brother ENGLISH SE VIDEO SURU KIA . BAD MAI APP KI ENGLISH KI HAWA NIKL GAI.FIR HINDI SURU HOGIE. PLE CHOICE ONE ON THIS.🐶🐶🐶🐶🐶🐶
Plz replay
Bakwas product