I'm really glad I didn't have to do this until after you posted this video. I was lost without it, so a big thank you for making it!!! I'll have to restart it a few times for the ads to play again so you'll get a bit more ad rev+up the view count👍
@@AnthonyJ350 I just swapped the entire set of panels from a different car. Matching dash and door cards. The harnesses were different for the switches so you have to use the same ones
My window motor is dead an stuck with the window down 😲😱! So Im replacing both motors cuz I like my windows down, even n the hot summer days! Got the driver panel off, but I did break the frnt clip on the switch panel, hope it goes bck on flush 😬🙄! Gotta wait till the new motors shw up frm Amazon! 🤙😉
@@AnthonyJ350 hey whts up j350! Well the motors came n way ahead of schedule, an shwd up this Saturday morning 🌄 👏👌! Well installed them both an everything went ok at first ! Whts tht clunky nosies 🤨🤔! The new motors harnesses r lngr then the stock ones, so the regulators were snagging the harnesse cable😬! So I gently pulled the harnesse threw the nipple grommet boot to take out the slack, an everything is a ok! Both windows wrk like brand new, time fer sum fresh Air now 🚗💨💨👌😎! Oh an I did the window reset procedure tht went great! Thx fer ur info an help! Varooom varooom VQ35DE 6spd 😎
Can you show us how to bleed the clutch with out using anything. Bc a lot of ppl get stuck when the fluid doesn’t go flow anymore no matter what you do. That will be soo helpful for a lot of g35 and 350z owners
Thanks I have always wanted how to do this looks easy when you do it !!! Super Anthony do u know what clips I need for the front bumper the ones on top in front of the Rad I think they about 6 in total Regards Ron uk 🇬🇧🇨🇦🇨🇦🇬🇧🏆👍🙏😎
Thanks Ron, no I'm not sure on the specific clip. I would just get those from the dealer. They might be a little more than online but you know the quality will be good. I know we think they're just clips but I've seen a variation in material quality.
Thanks I will look into that and how’s ur lockdown down going I think we are for 3 more weeks miss getting my Zee out for a drive it was nice and sunny to day very hot been at the garage and finished dressing my engine bay as you do take care keep safe Regards Ron uk 🇬🇧🇨🇦
@@roned9189 It seems our province is looking into opening up slowly. I will continue quarantine till probably June, then I'll head back to the shop. The pandemic has been great as far as having a lot of family time and producing TH-cam content.
@@AnthonyJ350 no the the thing in between the hinges that keeps the door open that gets all loose easily I took it out and put small washers on each side of the rubber bushing inside and made it like new again it's a really easy job once you've got the door panel off
The driver's side door has a screw (under a plastic tab) down in the "door pull close handle" on my Z. It must not be on all models, but the power control trim piece will break at its bottom if you don't remove this screw first.
@@Beano_Bryan i ripped off the weather strip on the outside of the door that sits ontop of the door. once that is off you cangpush down on a lever with along stick or something on top of the door handle. You will need a new eatehr strip though.
why do none of these guides EVER show the bolts coming out and what length and size they are, that is the main reason I need these videos and not a single guide shows you the length , if you put the wrong length ones in there you can mess up the window regulator or even hit the glass....
@@AnthonyJ350 LOL... Thanks, but I trust myself more. I love my Z too much to let most suckers touch it. And it should be a piece of cake now, after watching it come apart. Thanks for taking the time to make the great video.
I'm really glad I didn't have to do this until after you posted this video. I was lost without it, so a big thank you for making it!!! I'll have to restart it a few times for the ads to play again so you'll get a bit more ad rev+up the view count👍
Thanks for watching and thank you for the support.
Nice and easy to follow, just did this at mine and helped alot👍
Glad it helped! Merry Christmas!
I just did this yesterday lol nice video. I did a Interior swap tan to black
Did you rewrap the panels?
@@AnthonyJ350 I just swapped the entire set of panels from a different car. Matching dash and door cards. The harnesses were different for the switches so you have to use the same ones
@@AnthonyJ350 if I had the material I would definitely rewrap
Sat in car removing my door panel watching your video for help thanks a lot :)
Glad the video helped!
amazing explanation
Glad you found the video helpful!
This helped, thanks.
You're welcome!
My window motor is dead an stuck with the window down 😲😱! So Im replacing both motors cuz I like my windows down, even n the hot summer days! Got the driver panel off, but I did break the frnt clip on the switch panel, hope it goes bck on flush 😬🙄! Gotta wait till the new motors shw up frm Amazon! 🤙😉
Let us know how it goes
@@AnthonyJ350 hey whts up j350! Well the motors came n way ahead of schedule, an shwd up this Saturday morning 🌄 👏👌! Well installed them both an everything went ok at first ! Whts tht clunky nosies 🤨🤔! The new motors harnesses r lngr then the stock ones, so the regulators were snagging the harnesse cable😬! So I gently pulled the harnesse threw the nipple grommet boot to take out the slack, an everything is a ok! Both windows wrk like brand new, time fer sum fresh Air now 🚗💨💨👌😎! Oh an I did the window reset procedure tht went great! Thx fer ur info an help! Varooom varooom VQ35DE 6spd 😎
@@jhonsmith2150 Awesome job! Glad to hear you fixed it!
Can you show us how to bleed the clutch with out using anything. Bc a lot of ppl get stuck when the fluid doesn’t go flow anymore no matter what you do. That will be soo helpful for a lot of g35 and 350z owners
Without no pressure pump I mean
I was planning to go to the Z Shop this summer and change the slave and just do the 2 person method with Dan.
Thanks, very helpful 👍
Thanks so much for watching!
Thanks I have always wanted how to do this looks easy when you do it !!! Super Anthony do u know what clips I need for the front bumper the ones on top in front of the Rad I think they about 6 in total Regards Ron uk 🇬🇧🇨🇦🇨🇦🇬🇧🏆👍🙏😎
Thanks Ron, no I'm not sure on the specific clip. I would just get those from the dealer. They might be a little more than online but you know the quality will be good. I know we think they're just clips but I've seen a variation in material quality.
Thanks I will look into that and how’s ur lockdown down going I think we are for 3 more weeks miss getting my Zee out for a drive it was nice and sunny to day very hot been at the garage and finished dressing my engine bay as you do take care keep safe Regards Ron uk 🇬🇧🇨🇦
@@roned9189 It seems our province is looking into opening up slowly. I will continue quarantine till probably June, then I'll head back to the shop. The pandemic has been great as far as having a lot of family time and producing TH-cam content.
Very well done video!
Thank you!
Thanks!!!
Welcome!
What bolts are these im missing them
You'll have to check on Z1 Motorsports or ask the dealership.
very helpful, thanks. btw you should follow up with one on fixing the door stopper
Which door stopped are you referring to? The hinge?
@@AnthonyJ350 no the the thing in between the hinges that keeps the door open that gets all loose easily I took it out and put small washers on each side of the rubber bushing inside and made it like new again it's a really easy job once you've got the door panel off
The driver's side door has a screw (under a plastic tab) down in the "door pull close handle" on my Z. It must not be on all models, but the power control trim piece will break at its bottom if you don't remove this screw first.
Thanks for sharing
I can’t open the door from the inside and outside for some reason, do you know a quick fix that won’t destroy my inside panel?
Did someone pull on the handle while you were unlocking the car?
@@AnthonyJ350 not too sure but i took off the external weathertop trim and can see from the little space that the linkage has popped out.
@@anffdid you ever find a way to open it, im dealing with the same problem.
@@Beano_Bryan i ripped off the weather strip on the outside of the door that sits ontop of the door. once that is off you cangpush down on a lever with along stick or something on top of the door handle. You will need a new eatehr strip though.
What pry tool are you using? What’s it called?
12Vtools and SnapOn trucks have this pry tool.
why do none of these guides EVER show the bolts coming out and what length and size they are, that is the main reason I need these videos and not a single guide shows you the length , if you put the wrong length ones in there you can mess up the window regulator or even hit the glass....
Make note of the length when you pull it out.
Looks scary... I need to change out the passenger side AC vent. I hate the interior work... LOL!
You could pay a professional and they can assume the responsibility of the door.
@@AnthonyJ350 LOL... Thanks, but I trust myself more. I love my Z too much to let most suckers touch it. And it should be a piece of cake now, after watching it come apart. Thanks for taking the time to make the great video.
@@patrickkillilea5225 Glad the video helped you!
tks. Pop's
I'm not that old yet!
you’ve already uploaded this video before dude
It was for doing a speaker install. I scaled the video down for people just wanting to see the panel removal. Thanks for recognizing it.