I just picked one up for $150 like new. The owner said he used it twice and decided to go a different route. I am going to install a one burner propane cook stove in mine as I do not feel like messing with charcoal. The burner runs $24 . I would rather use an ajustable heat source and just add the smoking chips. My last one was electric and it shorted out and the electronics blew up. I personally see no reasong to seal things that well. After using mine, I think it did a good job.
thanks for the video. would like to see it fired up but i guess its been a few years since you posted it. i just got one of these and im gonna assemble it tomorrow. hows that rtv holding up?
Just bought one myself from amazon and will take your video under advisement since you raised some good points. 'Did you do a video of using it'? I'd like to see how it did for you since we are big smoker fans in our home. I'm thinking I won't be able to use basic firewood sized pieces in it like I do with my side box smoker from lowes ..
Nice video, bot the temperature probe on the thermometer is the longer one, the other is just a line up tip to make sure it is up and down. No harm done.
Great video, thanks Steve. Got a couple questions if you don't mind. On your fire box did the horizontal damper seal properly (no air or light when fully closed)? On your chimney in the full closed position is it full horizontal or partiality open?
just got me a dyna wide & you said the racks slide down alittle, try flipping them so that the bez things is up, its better for me alil hard to get them in that way tho...great vid.
Hi Steve, are you still using your Dya Glo? What do you think of it? I've heard that it won't get very hot (ie, above 200 degrees) in cold weather, due to thin metal...have you experienced that issue? Thanks!
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
It's a very nice job and I appreciate the honesty when putting it together as I make a lot of mistakes! Thanks
I just picked one up for $150 like new. The owner said he used it twice and decided to go a different route. I am going to install a one burner propane cook stove in mine as I do not feel like messing with charcoal. The burner runs $24 . I would rather use an ajustable heat source and just add the smoking chips. My last one was electric and it shorted out and the electronics blew up. I personally see no reasong to seal things that well. After using mine, I think it did a good job.
Steve, can you upload a video of what the smoker looks like after 5 years?
wish i had seen this before i put mine together
thanks for the video. would like to see it fired up but i guess its been a few years since you posted it. i just got one of these and im gonna assemble it tomorrow. hows that rtv holding up?
Thanks for sharing! I will be putting one together very soon. Do you like how it cooks?
Thanks
Just bought one myself from amazon and will take your video under advisement since you raised some good points. 'Did you do a video of using it'? I'd like to see how it did for you since we are big smoker fans in our home. I'm thinking I won't be able to use basic firewood sized pieces in it like I do with my side box smoker from lowes ..
Joe Don hey have u used it? How did it preform
Looking at other reviews the seals are not so good.
He reading to deep into the entire build
Thank you for the awesome video! PLEASE do a follow-up video and let us know how it works, and how you like it!!
Nice video, bot the temperature probe on the thermometer is the longer one, the other is just a line up tip to make sure it is up and down. No harm done.
haha, Im such a rookie! thanks
Did it hold smoke and temp pretty good?
sam hunt, yea i didnt have a problem with smoking it. the meat had a nice deep smoke flavor and was trender
Steven Pratt Jr how do u like it now after several uses. Can you do an update video. I’m getting one in 2weeks
Thank you, this will help lot of good information
Great video ! I know it’s an old video, but by chance do you still own this smoker? If so do you know the measurements of the firebox opening?
I don't think he's gonna reply
Great video, thanks Steve. Got a couple questions if you don't mind. On your fire box did the horizontal damper seal properly (no air or light when fully closed)? On your chimney in the full closed position is it full horizontal or partiality open?
Did you do a video of the cook?
just got me a dyna wide & you said the racks slide down alittle, try flipping them so that the bez things is up, its better for me alil hard to get them in that way tho...great vid.
mikej1042 i will try that
Hi Steve, are you still using your Dya Glo? What do you think of it? I've heard that it won't get very hot (ie, above 200 degrees) in cold weather, due to thin metal...have you experienced that issue? Thanks!
How is the ease of moving it without having wheels?
Great videos. How's it performing for you? Been considering getting one myself
Hi. Great video! How do you like the smoker? Which forum has good info on this particular smoker?
great video and generous of you to share.How has it been holding up so far
also,any other tips since you have been using it?
Great video how do you like smoking with this smoker?
McCbass2525 , i love it! made some great ribs the other day.
Nice Dad and Son project
how did these mods workout for u?
Ty for the tutorial!!
great job ty sir
how bad did it leak?
vaynol81 it didnt.