Hello. Thanks for sharing the video. It explains very well how to calibrate the machine axes. I have that same model and it is currently vibrating when moving in the "Y" axis. Any idea what could be happening with the machine or what I should check? Thank you again
Good day everyone, When I want to configure the Z I get a negative number. In this video it is said that there is a measurement error when the Z is not between 15 and 60. What can I do to solve the measurement problem? Please help. Note: This is a LNC MW2200
Hello, very good video! Helped me turn on and set up the machine, the controller is LNC MW2200. I want to ask you what software you use to prepare the (.nc) files? So far I have used artcam 2018 which has over 30 different (.nc) "G code for the tool path files" , only one was able to open but there is a problem with the Z axis. Thank you very much !
Different machine models need to be configured with corresponding post-processors. I don't know what model your machine is, so I can't give you the corresponding post processor.
@@STYLECNCService Thank you, I sent an inquiry to the supplier and accordingly he should request information from the manufacturer, I am still waiting for a response from them.
Is your machine an ATC machine, or does it only have one tool? If it is an ATC machine, the length of each tool needs to be written into the tool manager. If it is a single spindle and a tool. Just write the Z axis to the Z value in G54.
@@vedantchaudhari2093 this is very good video show you all settings, move z on top off piece you want to cut and put them numbers in z setting in g54 colum
This is my bible from today 😂
You saved me friend ❤
Hello. Thanks for sharing the video. It explains very well how to calibrate the machine axes. I have that same model and it is currently vibrating when moving in the "Y" axis. Any idea what could be happening with the machine or what I should check?
Thank you again
Check whether one of the two Y-axis motors has stopped working.
Check the gear position for any impurities.
Check Y-axis drive.
Good day everyone,
When I want to configure the Z I get a negative number. In this video it is said that there is a measurement error when the Z is not between 15 and 60. What can I do to solve the measurement problem? Please help. Note: This is a LNC MW2200
Hello, very good video! Helped me turn on and set up the machine, the controller is LNC MW2200. I want to ask you what software you use to prepare the (.nc) files? So far I have used artcam 2018 which has over 30 different (.nc) "G code for the tool path files" , only one was able to open but there is a problem with the Z axis. Thank you very much !
Different machine models need to be configured with corresponding post-processors. I don't know what model your machine is, so I can't give you the corresponding post processor.
@@STYLECNCService Thank you, I sent an inquiry to the supplier and accordingly he should request information from the manufacturer, I am still waiting for a response from them.
Hello, you recived response , how post processor??@@georgipraskov8223
If you need a post-processor, please go here to download it.
www.stylecnc.com/blog/free-cnc-post-processor-files.html
Hello, how do I know what postprocessor my machine uses for Aspire 10.5?
If you need a post-processor, please go here to download it.
www.stylecnc.com/blog/free-cnc-post-processor-files.html
Hello Dear, please wich .nc i have to use in ARTCAM 2011 or 2018 ? there is too much .nc formats
Different machines have different post-processors.
What is the control system of your machine? Does the machine have ATC function?
Please help! Where to get ReconFTP to connect to this CNC machine or what username to use to connect with FTP?
I need posts G CODE for artcam for lnc system
thank you
th-cam.com/video/64IZR-3K7jc/w-d-xo.htmlsi=goWJU-WxDU31pVGV
Here is a full how-to video as well. Comes with complete cutting process.
Si no qiero utilizar el atm... Como guardo el valor del eje z?
Is your machine an ATC machine, or does it only have one tool?
If it is an ATC machine, the length of each tool needs to be written into the tool manager.
If it is a single spindle and a tool. Just write the Z axis to the Z value in G54.
👍🏻
th-cam.com/video/64IZR-3K7jc/w-d-xo.htmlsi=goWJU-WxDU31pVGV
Please help to set z axis in G54 coord z axis number getting 6.361. How to set z axis in range of 15 to 60
Please help me sir
Select the Z axis.
Just enter the number you need
@@vedantchaudhari2093 this is very good video show you all settings, move z on top off piece you want to cut and put them numbers in z setting in g54 colum
Hello, how can I have an activation code
If your machine reaches its expiration date. Please contact the supplier from which you purchased the machine