@@massfreak1use a grade rod to calculate the difference between every 200 feet off survey stakes then raise each pipe up a 5 hundredths or so untill you can run straight to grade of the next stake there’s no reason to send a pipe home uneven cuz your grade is too high. Bigger pipe is higher risk to roll a gasket due to it being uneven.
Question. What do you charge per foot to install a 4" water line? If the customer provides material and you trench and install the line. I'm in Texas and I'm trying to compare pricing.
Nosotros nos dedicamos a lo mismo,pero así como va escarbando la máquina,así vamos metiendo la tubería,pero pues cada compañía tiene su forma de trabajar
I’ll give these guys don’t know what they are doing but I push every joint with my bucket. There is no reason to make your guys bale up waterline with a bar.
Push with the bar. That's a real pipelayer.
No it isn’t
@jeff7764 yes it is
@@thekeegan985 nope
Absolutely use a bar. Pushing with the excavator to much risk. If your pipe isn’t straight you can roll the gasket inside
@@massfreak1use a grade rod to calculate the difference between every 200 feet off survey stakes then raise each pipe up a 5 hundredths or so untill you can run straight to grade of the next stake there’s no reason to send a pipe home uneven cuz your grade is too high. Bigger pipe is higher risk to roll a gasket due to it being uneven.
Much more efficient to lay the pipe as ur digging
also less risk of trench collapsing if u do it your way which is good
30000000000 percent agree with you. this is like leak city right here
How is this way done? The pipe on top and you dig under it ?
Very interesting approach
You could use a bar quicker than these idiots
Hell take a bar and shove it together
A lot wrong with the way this crew is being run.
And what are those?
Specs of c900 say to leave a half inch of space between the bell and spigot. For deflection
Question. What do you charge per foot to install a 4" water line? If the customer provides material and you trench and install the line. I'm in Texas and I'm trying to compare pricing.
Texas!!holy Jesus only steers and queers come from Texas and you don't have horns so that kind of narrows it down 😂🤘
If my inspector saw me stabbing the pipe with the machine like that he’d lose his shit 😂
Then your inspector is a moron……
I use the next pipe in line to gently tap the one before it In, instead of having to pull with a chain
I wonder where is a rubber when there are using machine to push the pipe instead of using the bar
(umgxala)
Of course there's the know it all that says there's a lot wrong with the way this crew is being run
Do yall not shoot the ground for grade before laying the pipe and why not shove it home with a bar I do it all the time even on 12 inch main
Nosotros nos dedicamos a lo mismo,pero así como va escarbando la máquina,así vamos metiendo la tubería,pero pues cada compañía tiene su forma de trabajar
Cómo conseguir número de teléfono para tratar tuveria de pvc
Is this Domestic water main where is the trasher wire ??? Other
slam the pipe by hand , rookies
It’s people like you that don’t know the difference between c900 and class 200. You ain’t barring 1,000ft c900 in a day. Ain’t happening
I’ll give these guys don’t know what they are doing but I push every joint with my bucket. There is no reason to make your guys bale up waterline with a bar.
@@DLo336you could swing the pipe in 😂 no bar or nothing if u do it right
jajajajaj se tardan el triple de tiempo, se ve que no presionan en esa compania, que compania es
What is that pipe grapple called. I want one.
Pipe tong made by Crescent. They’re made for all pipe sizes.
😮
Muovia, muovia, muovia.... Putki käytössä "ehkä" 100v Mutta ongelmajätteenä vielä varmaan miljoonan vuoden jälkeenkin...🤨