2019-2021 Ford Ranger LED Side Marker Install How To

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 พ.ย. 2024

ความคิดเห็น • 75

  • @NetRedding
    @NetRedding 3 ปีที่แล้ว +7

    Thank you! I started to remove the wheel well cover then saw your video. Saved me time!

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      Your welcome! Glad the video helped!

    • @wademccomas4004
      @wademccomas4004 3 ปีที่แล้ว +1

      Nearly done the same, but held out hope for a easier solution 🙏

  • @tazmanken01
    @tazmanken01 ปีที่แล้ว

    I have a Silver Ranger Lariat and did not want the smoked lenses because it would be the only dark thing on the side of the truck so I ordered the clear 2 light lenses and clear sequential mirror turn signals. But the LEDS definitely look much much better.

  • @5321-z9n
    @5321-z9n 2 ปีที่แล้ว

    Love this upgrade. Looks so much better.

  • @vhockada
    @vhockada 3 ปีที่แล้ว +1

    Just did the swap and it looks good. Got same color truck and just used my fingers for the install.

  • @Adam-yx3ft
    @Adam-yx3ft 2 ปีที่แล้ว

    I bought these and installed them. They work great so I thought. If the truck is off they light up all the way, but when the truck is actually running and you turn the lights on only half light up. I assumed they were always working because I never saw them when the truck is running because i was in it. Have you left your truck running and got out to check if they are all lit up? Only curious because the seller said they have had this issue where only half the leds stay lit when the truck is running.

    • @TheWiscoGuyz
      @TheWiscoGuyz  2 ปีที่แล้ว

      Yeah I have left it running and they where fully lit up

  • @myplaxismodelisbetterthanyours
    @myplaxismodelisbetterthanyours 3 ปีที่แล้ว +1

    I got basically the same lights under the morimoto brand and you can see each individual LED vs what looks light two light bars in video and photos. It looks better on camera to me

  • @oneeyewilly1780
    @oneeyewilly1780 3 ปีที่แล้ว +1

    Looks good! I have the Magnetic and that orange marker looks wierd to me. If you haven't done the 2.5 inch level on the front I highly recommend it with 265/70-17s

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      Thanks! I Might do a full lift kit some day when warranty runs out.. I am doing a giveaway on these lamps on the channel.. If you dont already have a set you can enter to win. Link to the video for the giveaway. th-cam.com/video/X0FAlkYqTL4/w-d-xo.html

  • @TXH1138
    @TXH1138 2 ปีที่แล้ว +1

    Are they still working? I read some of the reviews of this brand and another, that I returned, and they said they didn't last long and the passenger side didn't fit tight, which is why I sent back the ones I bought.

    • @TheWiscoGuyz
      @TheWiscoGuyz  2 ปีที่แล้ว +1

      I haven't had any issues

  • @Kmahomie
    @Kmahomie 3 ปีที่แล้ว +1

    Helpful video buddy!! Appreciate it!

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      Thanks for watching! Don't forget to subscribe!

  • @eddiesantiago6288
    @eddiesantiago6288 2 ปีที่แล้ว +1

    I tried to get my finger in that tight area till it was blue. I actually didn't feel the tap referred to. I tried several times till my finger hurt pretty bad. I was trying to avoid removing the wheel well to get at the back of the housing. I guess I have no choice.

    • @TheWiscoGuyz
      @TheWiscoGuyz  2 ปีที่แล้ว +1

      Did you get them in yet?

  • @jeromecaballes2085
    @jeromecaballes2085 2 ปีที่แล้ว +1

    Did you remove the fender liner to do the install?

    • @TheWiscoGuyz
      @TheWiscoGuyz  2 ปีที่แล้ว +2

      Nope. I just reached my finger up to the tab and pushed up. The lamp pops right out

  • @johnmurphy6671
    @johnmurphy6671 3 ปีที่แล้ว +1

    How are the lights holding up since putting them on? Still working good?

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +2

      Still working good and bright!

  • @dabz_n_budz
    @dabz_n_budz 2 ปีที่แล้ว +1

    would these work on a ford ranger 2022 lariat tremor edition?

    • @TheWiscoGuyz
      @TheWiscoGuyz  2 ปีที่แล้ว +2

      Yes

    • @dabz_n_budz
      @dabz_n_budz 2 ปีที่แล้ว +2

      Fit flush and look great, thanks 👍

  • @shybuck2237
    @shybuck2237 4 ปีที่แล้ว +1

    thanks for sharing...like your channel and I'll be doing the same on my Ranger!

    • @TheWiscoGuyz
      @TheWiscoGuyz  4 ปีที่แล้ว +1

      Awesome! They are for sure worth the money!
      Thanks for Watching!

  • @kenpoche9101
    @kenpoche9101 3 ปีที่แล้ว +1

    I just got my lights excited about putting them in I wanted to ask you about running wheel spacers I assume that is not good for the bearings what are your thoughts

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      I have heard wheel spacers wear suspension parts and wheel bearing parts faster... But people put them on all the time. If you do get wheel spacers get a good quality one.

    • @kenpoche9101
      @kenpoche9101 3 ปีที่แล้ว +1

      @@TheWiscoGuyz I am surprised with you being a mechanic that you have not heard of wheel bearing problems with spacers I was told it is about $1,000 to replace the wheel bearings and these trucks you need a special press machines to do it are you familiar with replacing the wheel bearings in these Rangers

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +2

      These trucks are still newish... Probably won't see these come in with wheel bearing problem for a few years yet around my area. Nobody really modifies newer trucks in my area unless its a 3/4 ton or 1 ton diesel.

    • @myplaxismodelisbetterthanyours
      @myplaxismodelisbetterthanyours 3 ปีที่แล้ว +2

      I would not use wheel spacers greater than 20 or 25mm. You should really just get the proper wheel offset or full suspension upgrade. That being said, running crazy offsets and super wide tires causes the same problems

  • @peter321el
    @peter321el 3 ปีที่แล้ว +1

    Those should flash with the turn signal or hazard lights on. Maybe you have the polarity backwards?

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      They do not flash... Even the factory housings and bulb do not flash.

    • @peter321el
      @peter321el 3 ปีที่แล้ว +1

      Sorry your right, I just checked mine. I could have sworn I’ve seen them flash in the past.

  • @stephensturges5711
    @stephensturges5711 3 ปีที่แล้ว +1

    what about the fender liner?

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว

      You can sneak by it

    • @stephensturges5711
      @stephensturges5711 3 ปีที่แล้ว

      @@TheWiscoGuyz hmmm...I just ordered a pair so I'll give it a shot

  • @johnhoffman8960
    @johnhoffman8960 3 ปีที่แล้ว +1

    Great video! Nice looking Ranger. Was wondering how the side markers are holding up?

  • @ricardogarza533
    @ricardogarza533 2 ปีที่แล้ว

    I am looking for the bulb socket (black piece) anyone know where I can order it or go get it?

    • @TheWiscoGuyz
      @TheWiscoGuyz  2 ปีที่แล้ว

      May I ask why do you need that socket?

  • @xraypj69
    @xraypj69 4 ปีที่แล้ว +1

    For some reason I don’t see a link for the markers. What brand are they?

    • @TheWiscoGuyz
      @TheWiscoGuyz  4 ปีที่แล้ว

      I got mine from Amazon. But here is a link from eBay. www.ebay.com/i/402291549421?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=402291549421&targetid=935083617587&device=m&mktype=&googleloc=9019352&poi=&campaignid=10877432047&mkgroupid=112821775411&rlsatarget=pla-935083617587&abcId=9300402&merchantid=7929264&gclid=Cj0KCQjwv7L6BRDxARIsAGj-34oWOtJPjBNU4qUCYJfAJ-TQwt5uEUW8gz7entYC4FJAztepsBt9--saAgvrEALw_wcB

  • @chrislegg8022
    @chrislegg8022 4 ปีที่แล้ว +1

    Looks Nice .... any chance you can do a part 2 that shows with the blinker on? Do they chase / Blink ?

    • @TheWiscoGuyz
      @TheWiscoGuyz  4 ปีที่แล้ว +1

      Thanks! I really think They look great. They do not blink though. They stay solid when lights are on.

    • @chrislegg8022
      @chrislegg8022 4 ปีที่แล้ว

      Ok , that is still good either way. I didn’t know if they tied into your other lights. With the way your truck looks I’m sure you have done plenty of searching. With the sequential lighting stuff.

  • @kidd21388
    @kidd21388 3 ปีที่แล้ว +1

    Just installed mine but it’s not one solid led mine keep like flashing as if it’s like turn signals

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      Do have any other lighting mods?

    • @kidd21388
      @kidd21388 3 ปีที่แล้ว +1

      @@TheWiscoGuyz nope i just put them on and they are flashing

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      @@kidd21388 that is odd.... Maybe defective

    • @kidd21388
      @kidd21388 3 ปีที่แล้ว +1

      @@TheWiscoGuyz maybe it was different brand than yours i got from eBay

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      @@kidd21388 possible.... I would reach out to them and let them know

  • @paulpeters5199
    @paulpeters5199 4 ปีที่แล้ว +1

    That is sweet I'll be doing that to mine definitely

    • @TheWiscoGuyz
      @TheWiscoGuyz  4 ปีที่แล้ว +1

      Awesome! Thanks for watching!

    • @paulpeters5199
      @paulpeters5199 4 ปีที่แล้ว +1

      Just got it in the mail today and installed them and it was the easiest mod I've done so far and they are sweet I really like the looks of them

    • @TheWiscoGuyz
      @TheWiscoGuyz  4 ปีที่แล้ว +1

      @@paulpeters5199 heck yeah!!!

  • @ronnickle4065
    @ronnickle4065 3 ปีที่แล้ว +1

    Will these fit 2021 ranger ?

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +2

      Yes

    • @kenfuller8025
      @kenfuller8025 3 ปีที่แล้ว +1

      They physically fit but the connector is different. The 2019 & 2020 use a type 194 connector. The 2021 is a different pin type connector. I’ve not been able to find anything but those with a 194 connector. Option would be to purchase 194 pigtails and remove stock pin connector.

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      @Ken Fuller it should be the same as a 19 and 20. make sure you pull the 194 bulb out of the socket. Then the harness from the led lamp with plug into were the 194 came out of. 3:13 and on.

    • @kenfuller8025
      @kenfuller8025 3 ปีที่แล้ว +1

      It’s not a 194 configuration. I just got my 2021 3 weeks ago. Ford must have made a change. Thanks though

  • @johnaguirre4448
    @johnaguirre4448 2 ปีที่แล้ว

    Where did you buy them from

  • @richardz_1229
    @richardz_1229 3 ปีที่แล้ว +1

    👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽

  • @sylvainster30
    @sylvainster30 4 ปีที่แล้ว +1

    Awesome! They look fantastic! If you don’t mind me asking, how much was that upgrade cost?
    ✌🏼😎👍🏼 ps i’m an idiot....saw the link 🤪 49$ really good deal!

    • @TheWiscoGuyz
      @TheWiscoGuyz  4 ปีที่แล้ว +1

      Thanks! On eBay there around $40 and Amazon has them for $50

  • @stephensturges5711
    @stephensturges5711 3 ปีที่แล้ว +1

    I'm finding no tab

    • @TheWiscoGuyz
      @TheWiscoGuyz  3 ปีที่แล้ว +1

      2:40 there is a tap on the back side of the lamp that you press up.. as your pressing on it push out at the same time. It up there a little ways.

    • @stephensturges5711
      @stephensturges5711 3 ปีที่แล้ว +1

      @@TheWiscoGuyz maybe my finger is too fat. I already snapped the light at the edge. I'll have a shop do it

    • @eddiesantiago6288
      @eddiesantiago6288 2 ปีที่แล้ว +1

      @@TheWiscoGuyz Okay, I'll try it again. My fingers are not that fat but I"m not feeling that tap.

  • @Malikot911
    @Malikot911 3 ปีที่แล้ว

    I struggled getting mine out… my index finger started bleeding lol