The BEST way to Fix Screw Pops in Drywall!!!
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Everything you need to know to repair screw pops!
Here's some tools you might need:
DISCLAIMER: As an Amazon Associate I make a small commission from purchases made through these links. Thanks for the support!!!
TapeBudy Mixit: amzn.to/3O3b5hN
Tapebuddy: amzn.to/46WDA9E Here’s a video for using the tape buddy: • How to use the Tape Buddy
The BEST mudpan EVER! amzn.to/44BPbZZ
4 inch knife: amzn.to/43CgnXr
6 inch knife: amzn.to/3O1XUOi
Hawk: amzn.to/3DqxMaK
Some nice 12x5 Trowels:
amzn.to/3Q80MLX
amzn.to/3OowbZr
amzn.to/3pSlTaG
Corner Roller: amzn.to/3Dpb8j2
Tape Holder: amzn.to/3Ya0vu3
The contrast between your blue mud and white mud really shows the benefits of the second coat in those screw wells. Very interesting!
Details can getcha' ! Yup.
Agreed!
I’m a painter and from what I’ve seen watching your videos you do a great job. It would be amazing to follow you up as a painter. This was a good video. I hate screw pops and this is the first in depth video or explanation I’ve received on how to properly deal with them. Thanks!
I've also been watching his videos for a while now, and I agree with you.
I especially like that you make it pretty clear that this is the drywaller's job. As a professional painter for 35 years... oh boy did I end up spending hours upon hours fixing this kind of stuff before I even got ready to prime.
It’s a time suck for sure. You don’t want to lay paint over those protrusions. They’ve become a personal obsession in my townhouse renovation.
The blue dye really shows the depth of any additional layers. That was cool. @13:33
Even if I don't have drywall in the works, I enjoy sitting back watching a pro make it all look so perfect. ( mixed with a little humor of course) Thanks Vancouver Carpenter
This guy is fantastic, so thorough. Explains logic and reasoning which most in these industries don’t possess.
Been doing this for almost 20 years....You are whom I recommend DIY persons view! Love your personality and commitment to the doing it right approach.
I like to push up on the rock by hand while running in the screw so the screw doesn't have to do all the work to pull the sheet rock up.
I’ve watched a bunch of screw pop videos and they usually only fix one and are only placing one extra screw in. This was SUPER helpful to see the process of fixing Many of them and also how it can introduce even more (which should also be fixed). My house is only about 20 years old but they used nails, not screws and I have a TON I need to fix unfortunately.
If you need drywall video content my newer construction home has pretty much every single issue you can have with drywall :) - I think Ray Charles and Stevie Wonder teamed up to do the drywall work and paint - I don't think there is a single panel in my house that does not have multiple screw pops - or if they aren't pops they weren't sanded enough so it looks like a screw pop anyways. Been trying to fix my upstairs before moving to other parts of the house and a crew came in to level 5 and essentially made it worse - walls look like the moon and still can see where screw pops were repaired lol. They of course tried to make it out like I am just a problem client and was "looking for problems" when you can literally see 9 inch power sanding disc indentations throughout the walls - areas weren't even sanded when they cleaned up and left..literal nonsense but that's the quality of work people do these days. In any event - videos like these are the reason I can do a lot of drywall work myself - they are greatly appreciated..I just wish I had clones of myself or there was more time in the day.
Are you in Vancouver?
Haha no unfortunately not - down in Tennessee. If you want a vacation to see some mountains and oodles of rednecks, I got ya covered LOL.@@vancouvercarpenter
I have filled my share of nail pops over the years, Ben, and you did an excellent job of making all of the necessary repairs on this ceiling. As they say in the painting world or in any of the trades, "preparation is 90% of the job!"
My mantra this past month, but still needed to hear that. Painting is the fun/easy part.
I love the smurf mud! I hope we get to see every coat a new colour next time. 😊
Really like the idea of tinting (maybe not Smurf blue) to make it easier to find repaired spots. I seem to miss one or two - have to go back.
Thank you for all of your videos. I learned so much about drywall from you. Moved into a new house... over 500 popped screws. It was enough for me to buy a drywall screw gun.
You turn into a screw/nailpop detector. I’m staying in a place where there are 7 screw pops in the wall above my headboard. An exercise in restraint.😃
I enjoy watching these videos as much as I enjoy my quilting and watercolor videos. Thank you!
I love the blue tint! Helps it show so much better on video, since it's really hard in videos compared to real life to see exactly how you laid it down. Thanks for doing that.
Really well done. Your attitude is to be molded after. The information you share is always worth the watch.
If I lived near you I would work for free if I could work with you on a few jobs. Thanks for all your effort to share your skills.
That’s scary as hell some used fine thread screws in wood especially on a ceiling! People try to get others killed out here
Even though you used too much dye, I like the contrast, helps visualize what's happening the second time.
Those were some of your best passes with the mud, especially that last one. I would love to see more camera shots of the mud on the blade before it gets carded off into the pan though. We rarely get to see the amount of mud you are taking off and It would show us a graph-like image of the pressure points you used on each pass. thx.
Perfectly demonstrates the reason why you need 2 coats. Brilliant video.
He used 3 coats. 2 is not enough.
A perfect video for me at the perfect timing. Remodeling a house I just purchased last year. Screw pops everywhere.
I color my mud for a few reasons depending on the situation.
(1) A lot of random small patches so you (or someone else who didn't do the mudding) can see them.
(2) To show what has been coated once, twice, etc when there's a large job that you have to skip around on.
(3) To show voids, dips, scratches, etc on successive coats (I originally started that as a learning tool, but it's so useful when there's a lot of mud going down).
(4) If I need to take photos since it shows up better.
(5) In case a homeowner needs to see any of the above.
(6) Because it looks cool sometimes, especially after final sanding when multiple colors are making patterns on major repairs.
Hilarious, been painting over 20 years, know all about fixing screw pops, not particularly fond of them, but still enjoyed the entire video.
If you're planning on leaving a little mud on, I use a bigger knife. I do "smooth" wall that way, something I learned doing production work on commercial sites. We used two nail spotter coats, 6" knife, full 8", full 12" which fills in a lot of the exposed paper, and then a full 12" in between in the areas without mud, being careful to not leave too much, just like spotting but not pulling it too tight. It results in a full "putty coat". It helped with the Flashing you were referring to as well. I found myself doing this on my own jobs too if the hangers or the board was a little on the rough side.
Very helpful. Thank you.
I'm really sorry that others write negative comments. Ignore them. You do excellent work. It's a joy to see a pro at work.
It really depends how they write them. Everyone has a right to express their opinion and it often gives me an opportunity to answer valid questions.
You can see the instant regret when he smears that first coat of royal blue mud
I’ve had to repair more than a few nail pops. I’m sure I will find more when I do other rooms. I use the coarse screws about 1-2 in. on each side after I remove the nail. Mud & sand until smooth then prime & paint. You never know the pops were even there. I doubt they used ANY drywall screws when the place was built just nails. Rinse & repeat every 5-10 years as required. Love the colour variance. Definitely notice how the second coat fills in nicely. Good work as always Ben😃
Nail/screw pops and best corner bead repair method debates- - both Excellent topics!
Thanks for the good content as usual
I literally just did this for my old 1960's house. Most of the nails rusted and fell out of the stud.... I wouldn't have discovered the issue if I hadn't decided to change the ceiling fans in the house. Most of the nail pops were masterfully hidden and could only be spotted with a bright light from right angle.
The ceiling in my garage has lots of pops. They used smooth shank nails that are slowly pulling out.
When my house built in 69, the drywall installers used smooth shank nails in my garage ceiling. All of them are slowly working loose, and I have a lot to repair.
It also has a stomp finish to make it harder to repair.
Best tutorials around. Your work and knowledge are both top notch. Thank you.
Your helpful videos are the best around. Don't change a thing. Thank you for all your posts.
Ben you did a video on this before and man did it ever help me. I am a painter and we are by default obligated to fix these things. My previous approach was to screw the original in farther and mud over. Now I do it like this and I came up with it before I watched this video. Glad to see Im starting to think more like pro. Thanks again for your videos.
Especially nice camera work on this video compared to some of the older ones I've seen. Not a slight on the older videos, just giving props to the camera guy on this one. The closeups and lighting (and dye) helped a lot on this one.
i tint my mud with chalk line powder 🤷♂️seems to work no issues with cover up with primer
Good video bud, after watching you for a few weeks now I can see why you've been successful with the channel. Keep after it.
It was impressive to see all the hidden screw pops appear! Wow.
It's so satisfying to watch you do this!
Smurf ceilings... I learn so much from you, grateful....
Putting those screws so close together is just perforating the drywall like a sheet of notebook paper. The reason the screws are popping is because of the imperfections in the lumber. Gravity will pull the drywall down again over time. Always glue the piss out of the ceiling rafters to make up any gapage. After the glue dries and hardens it will act as a shim between the wood and the drywall
hi ben just wanna say i watch ur channel everyday u have awesome dry wall skills i support u all the way and ur skateboarding tricks are awesome thanks for showing us the right way how to drywall ur awesome
I've done similar with plywood when ive had access to the back of a wall. Rather than fiddle with anchors for a very specific placement requirement that didnt line up w studs at all. I fit a half inch piece of ply and PL'd it to the back of the inside of the wall cavity.
The 2nd coat of mud was a great demonstration illustrating the NEED for the 2nd. Each of the hollow divots would have been noticeable. 👍
I've got one screw pop on my bedroom ceiling. The main issue is it's a popcorn ceiling. Had some roof damage several months back due to a near miss from a tornado and now also have some water stains on the same bedroom ceiling. So will more than likely remove the popcorn, repair the screw pop, refinish the ceiling, cover the water stains and finally repaint. Uggg!
I put the video at 75% speed and sound off (CC on). The hand and wrist motion is more clear and appreciated!👍
Nice! Often times my big box store has no "regular" drywall screws and I guess that's how I ended up with a box of 1 1/4 inch fine threads for steel studs. If Nick is the camera guy, well done! If it wasn't Nick, well done!
It was Nick 🙂
Thanks for the drywall advice. Enjoy your videos.
My friend taught me this trick almost 40 years ago, when nails were often used and they would pop as the studs would dry and shrink.
Love this! My dad is a master carpenter. We just installed a ceiling and a closet in my son's basement bedroom. He was just talking about this stuff. I think he also mentioned some sort of cement Incase the drywall seems show?
I find taking a wide junk bin stepper bit to old screw holes destined for mud makes a really clean surface by cleaning the paper and tapering the hole nicely.
Have fixed quite a few screw pops for clients before and encountered this once. Three obvious pops and as I kept working, it turned out to be at least a dozen. Absolutely not my fault and client agreed to pay.
Agree 100 percent w example of floor repair 2 to 4 ft up explanation
One thing that has caused a lot of screw pops I've experienced is installation of drywall over studs that have been exposed to rain during construction. After a couple of years when the framing has dried completely and shrunk it leaves space between the drywall and framing resulting in screw pops.
I wouldn’t pull the screws out that popped. After screwing additional screws in like you did just drive the screw deeper. Gives additional strength and helps prevent further popping.
Our house is over 70 years old and the drywall was hung with ring shank nails. I also think the wood might have been damp. As a result there are nail pops in the walls and the ceiling. Another thing is the primer was a thick sort of paint probably intended to over sloppy taping. That gives the paint a slight textured look.
So, when fixing a pop, the new finish is smooth and stands out against the slightly textured paint job around the patch. No one wants to do a skim coat on all walls and ceiling to get rid of the texture.
Always 1-5/8 on the ceiling; because rafters are usually 24” spacing need the depth for support. More weight in the screw. In my area***
Highlighting the differences of use for fine and coarse thread 🤩
Thats why gluing the ceilings are a necessary part of hanging sheetrock. We heavily glued everything.
I’ve learned SO much from you. Bless you 🙏🏼
You should tell us how you got started on drywall and how you figured out this was your gonna be your career.
Are there any extra steps you need to take if the seam between the drywall sheets has become visible but not cracked when it sagged and popped the screws?
Have dog(baby) gate at the bottom of the stairs that didn't wasn't mounted to the wall. The drywall is crap, having fun filling in, some shelac primer on the exposed paper etc. It has a 135 degree inside corner and that straigt line looks bad too.
We have another spot where a chair took all the paint off on a big area.
Every single video imparts knowledge. Thanks for sharing your experience and insights!
My walls are full of these pop outs. Valuable video. My house is going to look almost brand new by the time im done with it 😂
im honestly thinking of making smurf mud lol it really highlighted when I was doing wrong. Love your videos!
What about an existing vertical metal corner bead, the same thing? Get mud under the lifted metal corner bead and fiber mesh tape etc etc.
Have you ever tried mixing the compound with plaster of Paris when I do it there’s no shrinking one and done time is money but good job finding the pops that weren’t revealed till you drove in the screws.
Yo, sending you tons of appreciation. Your videos have truly catalyzed a large aspect of my contracting career and for that I am quite grateful. Question, would you be interested in doing a video on how you charge for or estimate your jobs? As a one man company charging per square foot rarely seems worth my time, and so I usually just charge my base rate for drywall jobs but can easily get underbid by a larger crew slamming out production work paying their guys $15/hour. How do you navigate this? Thank you so much man.
This was very much appreciated Ben! 💙
Hahaha the super blue was a great happening. Good for a chuckle man. GJ filming too by the way!
👍 and the additional info about the bead was much appreciated. If you made a lengthy video of additional info I would make popcorn and attend 😃
You're not worried that there is a 120V wire where you put the new screws? Love your channel.
Ben is my favorite canadian skater/carpenter
Painting my house I used a 200 count of screws fixing all the screw pops. What a pain in the butt (or tired arms). Looks much better than the last guy left it.
I have several drywall screw pops but I think it's because the drywallers used glue, didn't properly press the drywall into the glue (probably by not drilling the screws all the way into the drywall) and so when you lean against the wall there's an air gap and you get soreheads popping the mud out.
I always use a damp rag and a bucket to sand with,it even says to use that on the buckets of drywall compound
Don’t worry about finding screw pops, just take a roller loaded with unthinned paint to it the pops will be stuck to your roller ! Just don’t let anybody who doesn’t know his trade put up the plasterboard. Do not bugger about chasing screw pops like that, just make yourself a couple of trees (T props you may call them) and jamb them in near the pops you can see, you may have to re fix almost the whole ceiling !
I usually use trees to put plasterboard up in the first place because I work on my own, so my boards are pretty tight anyway, also most of our work is plastered, and the spread will soon let you know if your boards move !!
Learned yet another thing!! Thank you for all your expertise!! I'm learning so much from you man.. Really appreciate it!!!!
I thought about again. I think you are more of a drywall artist than a carpenter.
All the cool kids use urnal cake blue mud lol. As always though thanks for doing such a great job teaching
His knowledge is so universal
I love screw pops! 🥰🥰🥰
I use RIT Blue Jean dye. It's a very subdued grey-blue, covers very easily.
Thank you for the video!!! What do you do for screws hollowing out vs pops? I have an older 70’s home …. The ceiling drywall was screwed directly into the trusses … the trusses shrink and expand considerably with winter / summer temps. I have a bedroom that has multiple rows of screw indents & pops. Also this spring I’m noticing tape joints appearing all over .. like everything is frying out and shrinking? These joints have been there for 40 years… I’ve noticed the walls and ceiling getting wavy too … the drywall between the studs looks to “sinking” in
Dude you're still kicking out super useful info. Big thanks buddy!!!!
Great video. I've been doing this to the ceilings and walls in my own house to repair nail pops. I wish you had included a link for the driver bit you are using to drive in the new screws. Thank you.
Never had a screw pop... Mine were all due to some one using nails not screws. I know this because I scrapped the top of the pop and seen what it was and why. No matter had to be fixed any way but pulled the nail and put in a screw before fixing.
Be kind to each other. Stay safe. Love to all
Hi, I have a Ceiling in a small washroom that is 7 feet long by 37 inches wide. I need to replace the drywall on the ceiling. What is the best approach? So the ceiling looks good when I'm finished. Should I do it in one piece or 2 pieces? Because I have the half inch of the dry wall on both sides of the wall still in place.
Add to the list of hated things: popcorn ceilings. If ever I build a house, there will be none of that garbage.
from a newbie...why not use a stud finder and then do the screwing in or is it just a waste of time and with your experience you know where to place the screws.
I appreciate the tint even if it looks crazy in person! Thank you! 😂
You're going to love your new blue room.
Really inspired with your work. I also want to learn this skills. If there any chance to become you student/trainee to gain experience?
Super helpful video! My only question is: who does drywall repair in a black t-shirt?
Incredibly smart video, thank you. Fist bumps from Ontario :)
Big fan here Ben. Stupid question , I heavy second coat, then thin third coat. Any difference ?
Real ones know you from the skating community. So random seeing you have another successful channel haha
This guy is meticulous! His attention to detail helps me learn more!