Arduino Tutorial#7: Water Level Indicator With Buzzer
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2020
- Water Level Indicator With Buzzer
Code in the pin comment 👇🏻
Arduino Uno
Breadboard
LED
Buzzer
Water Sensor
Jumper Wire
Resistor(220k ohm)
Please Like and Subscribe and click the 🛎 🛎 button
For more arduino tutorial.
You can buy Arduino starter kit through "Arduino PH" click the link below:
profile.php?...
Thank you for Watching!
#led
#watersensor
#ledwatersensor
#buzzer
#watersensorledbuzzer
Code:
int red=7;
int blue=8;
int yellow=11;
int orange=12;
int buzzer=13;
void setup() {
pinMode(red,OUTPUT);
pinMode(blue,OUTPUT);
pinMode(yellow,OUTPUT);
pinMode(orange,OUTPUT);
pinMode(buzzer,OUTPUT);
Serial.begin(9600);
}
void loop() {
int sensor=analogRead(A5);
Serial.println(sensor);
if(sensor61 && sensor121 && sensor221 && sensor
Hello, is there a way to add SMS notification and a louder buzzer on this project? Sorry I'm new to arduino and I'm considering this one as my Thesis Project. Thank you in advance!
@@Algorhythmo Hello, message me on ig if you have a question @camsmilley
D
Could you send me the code file by mail, since it doesn't work for me, please
@@vazquezjosemarcoantonio3834 okay. Send email
Thanks for sharing this tutorial. Fascinating.
Galing naman
Wow naman 😯 series led
do we need to keep the laptop attached or can we remove it ?
Thank you. It was very helpful.
good day maam, even though i inserted the code, the sensor wont light up, how do fix this?
Arduino r3 can use or not?
Please halp I only have 3 colours of led what should I do?
Ay salamatbmay natutunan na namn tayo ngayon..salamat sa pagshare..#JE❤MEL
hello camille , can i get the coding for this project
there is something wrong in coding, please I need your help to do practice at school
Bro... Meeru ichina code a language? Please respond
hello , can i get the coding for this project
Nice video! But my leds won't light up even though my buzzer and sensor works. What could be the problem? Please 🙏 I need your help.
Hello check your connection 😊
What is your fb account?
Hi Camile, i already upload the coding but the led still lights up even though i didnt put in the water sensor and the buzzer didnt sound, can i get the circuit diagram. tq
Send email
Can I see the circuit?
Good video but there is problem , while the water reaches High level the buzzer will beeps and it will be continuing till the water level is decreased . But if we want to on the buzzer only for 10 seconds then it should turn of once the water level reach high plz tell me ok ..
Hi! Thank you for your suggestion. I will try to work it out for you as soon as I have the time to make it. Thank you
@@camsmilley thank you very much
Hi bat po kaya di nagwowork? Pls help
Nice
Hello sir I have to talk about this project
I want code of this project
hai..this cool,
can i have this circuit diagram
there is a error in a code
Can I get the code po?
Can you post code?
pwede po ako makahingi Ng code at diagram?
Esquema electronico?
Hello po, na upload ko na po sa arduino yung code pero hndi sya nagana, what could be the problem? Pls po i need ur help. Thankyouuu
Hello, ano po email mo?
Or fb po
Hindi naman po tumunog yung buzzer and kahit hindi pa nailagay sa water umiilaw na mga LED. Please help
Ano po fb acct mo? Help po kita
hi po nakainput na ako Ng code pero kapag lalagyan ko na po Ng water ayaw po lumipat Ng ilaw ano po Yung problem?
Hello sorry late reply, okay na po ba project mo? 😊
Hi can i get a code
Hello, i need help with regards to the project. how can i contact you.?
This is my email, camillejoydomingo31@gmail.com. 😊
@@camsmilley Sent an email to you. no reply.
Send me your email.
@@camsmilley ukwaire@gmail.com
Hello. Please for the code. 🙏🏾
Suggest ko lng po ano.
Izoom po ung code para mabasa naming mga viewer yun lng thank u
hello nakalagay po sa description. thanks po
Camille lodi help HUHU the instruction was super clear but i only have red,green,yellow LED 😭😭😭😭
Hello, what is your fb account? I will messge you
Ano po fb account nyo? May i consult po ako
@@jackryan479 message kita ano fb mo?
can i have circuit diagram
Can u please share the circuit diagram of this project?
Up
i need help plzzz
...i already upload the coding but the led still lights up even though i didnt put in the water sensor and the buzzer didnt sound
plzz help meee
Send email
@@camsmilley alyahusnax4@gmail.com
same problem. please help po. thank you
Eric Jhun miciano fb name..
New subscriber po more power...
is this arduino uno r3 clone SMD?
Arduino uno R3 mega3268
Pwede po ba mahinge circuit diagram neto? Thank you po
Hello po, sorry sa late reply need mo pa po?
hello po pwede po pasend Ng code
Pede po bang malaman yung codes na ginamit niyo? Pa-paste po. Thank you!
int red=7;
int blue=8;
int yellow=11;
int orange=12;
int buzzer=13;
void setup() {
pinMode(red,OUTPUT);
pinMode(blue,OUTPUT);
pinMode(yellow,OUTPUT);
pinMode(orange,OUTPUT);
pinMode(buzzer,OUTPUT);
Serial.begin(9600);
}
void loop() {
int sensor=analogRead(A5);
Serial.println(sensor);
if(sensor61 && sensor121 && sensor221 && sensor
Sorry sa late response ayan po code. Thank you for watching
Salamat po
Hello can you send me your full code
hello mam. pwede pa share nang code sa email for thesis purposes only
Hello sorry late reply
Can i get the circuit diagram and working of this project... plzz
Send your email
@@camsmilley hi po nagmessage po ako sa IG niyo salamat po
Sir paano kung buzzer lng wala nang LED
Send me pm po sa ig @camsmilley
Ok maam
Hey plzzz could i get the code for this project i need it for my class project plzzz
And the circuit diagram too
Can i have the code of this project, THANKYOU IN ADVANCE :)
Sure❣️ send me your email
@@camsmilley Thank You!
Send email ☺️
@@camsmilley oliquinopangs
@@samueloliquino1750 int red=7;
int blue=8;
int yellow=11;
int orange=12;
int buzzer=13;
void setup() {
pinMode(red,OUTPUT);
pinMode(blue,OUTPUT);
pinMode(yellow,OUTPUT);
pinMode(orange,OUTPUT);
pinMode(buzzer,OUTPUT);
Serial.begin(9600);
}
void loop() {
int sensor=analogRead(A5);
Serial.println(sensor);
if(sensor61 && sensor121 && sensor221 && sensor
Can you pls share the code?
Send email po
Can i get the diagram? just for my project
nursanbasara97@gmail.com
Okay
Hello can you send me your fb?
Nursan lang po yung si killua yung profile
salamat po
Helo sir where is the code
Hello, sorry for late response, pls send email.
pwede po patulong neg eeror yung code
Send your fb account para mas mabilis po. Thanks
hello can you put the coding here
Hello send email 😊
int red=7;
int blue=8;
int yellow=11;
int orange=12;
int buzzer=13;
void setup() {
pinMode(red,OUTPUT);
pinMode(blue,OUTPUT);
pinMode(yellow,OUTPUT);
pinMode(orange,OUTPUT);
pinMode(buzzer,OUTPUT);
Serial.begin(9600);
}
void loop() {
int sensor=analogRead(A5);
Serial.println(sensor);
if(sensor61 && sensor121 && sensor221 && sensor
Bro Arduino ka code share kar do
Send email and I will send it
May research paper kaba nito?
Hello po 👋 This is just one of the projects i tried during quarantine. Wala po akong research paper regarding this. Pero I can help you if you have any questions po. Thank you
@@camsmilley.... Ate pwede maka hingi ng pic ng model ate?
Anong model?
@@camsmilleyyung gawa mo po
@@maryjoynarrido9128 ano email mo? or fb
Code pls
int red=7;
int blue=8;
int yellow=11;
int orange=12;
int buzzer=13;
void setup() {
pinMode(red,OUTPUT);
pinMode(blue,OUTPUT);
pinMode(yellow,OUTPUT);
pinMode(orange,OUTPUT);
pinMode(buzzer,OUTPUT);
Serial.begin(9600);
}
void loop() {
int sensor=analogRead(A5);
Serial.println(sensor);
if(sensor61 && sensor121 && sensor221 && sensor
int red=7;
int blue=8;
int yellow=11;
int orange=12;
int buzzer=13;
void setup() {
pinMode(red,OUTPUT);
pinMode(blue,OUTPUT);
pinMode(yellow,OUTPUT);
pinMode(orange,OUTPUT);
pinMode(buzzer,OUTPUT);
Serial.begin(9600);
}
void loop() {
int sensor=analogRead(A5);
Serial.println(sensor);
if(sensor61 && sensor121 && sensor221 && sensor
stp code
peke hinde gumagana
Check nyo lang po wiring nyo and code.
can i get your email?? my buzzer keeps on buzzing even without reaching the full limit of water and my red led cant light up, do you have any suggestions for this? i wanna use this for my project