The one that you throw the tray away how much was that I am trying to start my grandson with a tool Box in his car please comment back that's ideal for what he needs thank you so much
@@martinneps9387 the prices very in canada form $25 to $50 depending on the box, I left some amazon links below the video for US and CDN. hope that helps, thanks for watching
Awesome video. I just ordered two items for the back of my Toyota Tacoma truck. What I got was the larger tool box (all black) that opens up at the top. And what I plan on placing below it is the single drawer box. Anything that opens “up” should have a single drawer or double drawer (or both) underneath it so you can access everything without having to take a top box off. I can’t wait to use Rough Country straps to hold this box to my Rough Country MOLLE bed walls. I plan on keeping a bottle jack and heavy duty jumper cables in the big box and smaller, low profile items like hand tools in the drawer below. Thank you for sharing this video, you did a great job of showing all the different options out there.
I use foam window seal, 3/16"-3/8" to fit in the groove of the upper lid to create a water proof seal on my TSAK's. It is thicker, and I believe more water tight, than the Craftsman Versa Stack foam seal they use.
I just bought five of the double drawer and five of the deep single drawer t staks this morning. I got sick of having blades and bits in the case with each tool so I now have a seat unit attached to each tool with the corresponding blades or bits inside. I also got two t stak tool totes one for my hand tools and one that I am going to fit a load of battery mounts in to to carry my vast collection of 18 & 54 volt batteries. I wanted to get the tough system 2.0 but I already have a t stak for each tool so that would have cost me even more. I'm happy with my set up for now at least lol. 👍🙂
You are very smart that's exactly what I am doing now having each tool or maybe a few if they fit in the same box with two sliding drawers underneath for the blades or the drill bits whatever the case but yes good idea!
Yeah and the Craftsman versastack also Stanley FatMax and of course the DeWalt tstak all fit together if you can get along with the colors mixed matched your good even though all the cordless tools inside are DeWalt
My recommendation is if your going to get into pack-outs of any kind you save and get a bunch. At least 3 full carts. If you buy one it will set empty because you can't decide what to put in it if you just have 1. Thank you for the review.
The one that you have not used yet that you throw the tray away how old is that 1 in how much was it please comment back thank you very much for this video does the exact kind of tool Box I am looking for I'm trying to start my grandson off with a tool Box Thank you again
good idea, be careful how much weight you put in the boxes that sit on top, i noticed a couple of my tstak drawer units started to bow a bit from all the weight i had above them.
Thanks for review , whats great about them is they have the drawers, so you dont have to take them apart in a customers home and spread them all out ! They"re actually portable . The Milwaukee are just tooo Bulky.... I may look into ordering them , nobody stocks them and I cant seem to find the large drawer units??
Great video. Thank u so much. Subscribed. I am really trying to pull trigger on t stack and versa. Almost every video I’ve seen so far the people telling me about visibly have tags and stickers on boxes. U obviously use yiurs. Very helpful. I tend to think that the other people are just buying, making a TH-cam, and returning new product back. Not fair. Thanks
Hello question for you, do you find the DeWalt tstak to be much stronger than the Craftsman versa stack? And do you think the bottom rolling box from versastack is smaller than the DeWalt tstak or Stanley?
hey brad.. which system/storage options would you recommend to a painter with a pickup truck?.. been racking my brain over it for awhile..i have tough system but i can only find the middle box works good for drywall..i do have sherwin williams bags (which have been good) but going to try the dewalt 4 in one mobile box.. ive tried packout twice but i couldn’t find a way to work either (prob my OCD).. any suggestions?
I like packout because it’s water proof and they have lots of options for other cases, The problem is they are expensive. The new Toughbuilt boxes look really nice and are way cheaper. I don’t like the dewalt system at all. To much work to connect them together. The tstak system is great but not waterproof, unless they changed. When I was working outside a lot I was happy using the packout system, not having to pull my trailer around was nice for a change. It’s definitely a hard decision to make because once you start buying boxes you are set in that brand. Packout does make a massive box that works for larger tools. But it can get really heavy. Hope my thoughts helped a bit. Best of luck! Let me know what you go with👊
@@hammerandhomethanks Brad.. always appreciate your insight and quick response.. overall i think it’s a good problem to have lol..i was looking into toughbuilt also.. thinking about waiting till spring/summer with their new additions etc.. keep up the good videos!
@@hammerandhome Thank's. I just ordered the Stanley, here in Europe u save a little over 10€, same goes for the Stanley foam inlay. Edit: I just wish it was the Toughsystem 2.0 but it's hard to find here in EU and the cost more than dubble. The new locks seems way smarter, but with all the boxes u have it will cost a small fortune to change them out for the new 2.0 i guess
@@bahionic that’s very true. I really like the size of the t stak boxes. They are just the right size and don’t get to heavy. However.. I’m really liking the Milwaukee pack out system and all the options they have. DEWALT doesn’t come close to as good of a system. But they are expensive. I’ll be doing a video on them soon.
I have the Ridgid system idk what they call it but I stopped using it because I found it annoying to have open and close the cases. Also I hated it when I needed a tool in the bottom case. taking apart the system to get one tool, no thanks lol. I then Built my Own tool cases which for me anytime you custom build something for your needs will always be better than what a company builds for the masses. Thanks for another great video 😊
I know exactly what you mean. I debated for a long time about building my own cases then I took the plunge and it was too late to go back 😬. For me having so many guys working with me I have to keep all my tools organized otherwise they go missing pretty fast. Thanks for watching craftman
I found that the T-Stak single-drawer units solve those problems for me. I combine those with two-drawer units, and then the only top-opening box in a stack will be one of their deep ones, which I put at the top.
Mark Gross I haven’t bought any of the tough system. I love the wall mount system they have. My only issue is they are two big for individual tools. And when you load them up they get pretty heavy. Tstak for me is better because of the size. I do wish they where built a bit stronger. Thanks for watching
They should make an adaptor so the tstak & tough system can clip together.its also annoying that tstak has slightly more depth so the trays won't fit in a tough system box.
@C W what did the spherical speaker enclosures sound like B&W use them with top tweeter enclosures.ive fancied having a play at a epoxy resin speaker enclosures
Martin Rodriguez I bought them on amazon, there’s a link to the tstak below the video. Once on amazon scroll down and there is a deal on right now for $14 US. Thanks for watching!
Seems like t stak been around a while. I’m just finding out about them and Versa. Any info or rumors on them coming out with the next model. Like am I buying at the wrong time. Also, I went to the farm ranch store today and they have tons of t stak. Their side clips look like yiur t stak clips. U said the new ones look more like the fat max side clips. Is my store running old model. Thx! Any info would be helpful. Not that this is life or death for me but I’m not a huge company or anything, just trying to invest what for me is a ton of money and yiur vid is super helpful. Thx! Do U have more t stak vids. Send em to me in reply on comment if u do. I quickly scanned yiur vids and didn’t see any. Then I started typing and now it doesn’t let me check yiur to tube site while typing or it deletes my text. Thanks again
I still can't justify getting the radio as nice as it would be for work. Feel it's way over priced. Also if you want to convert a box you can pick up a 2 inch noco power inlet-adapter, drill a hole and mount it with a few screws. Mount your chargers, can even get mounts off Amazon to secure your batteries
@@hammerandhome lol.....that's cool. I completely disassembled a used bandsaw I bought so I could thoroughly clean and repaint the individual parts (I'm refurbishing it). All the screw nuts, bolts, washers, knobs and springs from the saw are currently soaking in light oil inside those insert trays to keep 'em from rusting.
The Dewalt are cheaper and stronger than the Festool Systainers. I couldn't justify the price of the Festool either. Some people think that because they are more expensive, they must be better, but no. Of course you will have the fanboys that will cry for Festool, lmao.
What you need to know about the TSTAK Tool Organizer DWST17805 Clear! th-cam.com/video/pMaJPL85oxc/w-d-xo.html
The one that you throw the tray away how much was that I am trying to start my grandson with a tool Box in his car please comment back that's ideal for what he needs thank you so much
@@martinneps9387 the prices very in canada form $25 to $50 depending on the box, I left some amazon links below the video for US and CDN. hope that helps, thanks for watching
The one right before your skill saw Box could you put the Foam in my Box in the bottom please comment back and let me know thank you so very much
Awesome video.
I just ordered two items for the back of my Toyota Tacoma truck. What I got was the larger tool box (all black) that opens up at the top. And what I plan on placing below it is the single drawer box.
Anything that opens “up” should have a single drawer or double drawer (or both) underneath it so you can access everything without having to take a top box off.
I can’t wait to use Rough Country straps to hold this box to my Rough Country MOLLE bed walls.
I plan on keeping a bottle jack and heavy duty jumper cables in the big box and smaller, low profile items like hand tools in the drawer below.
Thank you for sharing this video, you did a great job of showing all the different options out there.
I like the tstak vrs the other larger models because they are easier to get in and out of your truck and haul around.
I use foam window seal, 3/16"-3/8" to fit in the groove of the upper lid to create a water proof seal on my TSAK's. It is thicker, and I believe more water tight, than the Craftsman Versa Stack foam seal they use.
I just bought five of the double drawer and five of the deep single drawer t staks this morning. I got sick of having blades and bits in the case with each tool so I now have a seat unit attached to each tool with the corresponding blades or bits inside. I also got two t stak tool totes one for my hand tools and one that I am going to fit a load of battery mounts in to to carry my vast collection of 18 & 54 volt batteries. I wanted to get the tough system 2.0 but I already have a t stak for each tool so that would have cost me even more. I'm happy with my set up for now at least lol. 👍🙂
You are very smart that's exactly what I am doing now having each tool or maybe a few if they fit in the same box with two sliding drawers underneath for the blades or the drill bits whatever the case but yes good idea!
Yeah and the Craftsman versastack also Stanley FatMax and of course the DeWalt tstak all fit together if you can get along with the colors mixed matched your good even though all the cordless tools inside are DeWalt
My recommendation is if your going to get into pack-outs of any kind you save and get a bunch. At least 3 full carts. If you buy one it will set empty because you can't decide what to put in it if you just have 1. Thank you for the review.
Thanks. Excellent video. It really helps to see a video of each toolbox module and how they fit together and are actually used.
Glad you enjoyed it! thanks for watching
Craftsman versa stack also!
Tray works great when screwing deck boards. Fill with screws and slide it along with you. 👍. Thanks for the video!
good idea!
Yep. Definitely about to dump most of my systainers
The one that you have not used yet that you throw the tray away how old is that 1 in how much was it please comment back thank you very much for this video does the exact kind of tool Box I am looking for I'm trying to start my grandson off with a tool Box Thank you again
Nice vídeo man. I don’t know That standley and Dewalt has compatibility
Thinking about going with the tstak trolly so I can put some drawer units at the bottom that I won't have to take off so often
good idea, be careful how much weight you put in the boxes that sit on top, i noticed a couple of my tstak drawer units started to bow a bit from all the weight i had above them.
@@hammerandhome thanks for the heads up!
Thanks for review , whats great about them is they have the drawers, so you dont have to take them apart in a customers home and spread them all out ! They"re actually portable . The Milwaukee are just tooo Bulky.... I may look into ordering them , nobody stocks them and I cant seem to find the large drawer units??
I personally like t stak more then tough system
totally agree!
Best review walk around these! Thank you!!
Your welcome and thx
Great video. Thank u so much. Subscribed. I am really trying to pull trigger on t stack and versa. Almost every video I’ve seen so far the people telling me about visibly have tags and stickers on boxes. U obviously use yiurs. Very helpful. I tend to think that the other people are just buying, making a TH-cam, and returning new product back. Not fair. Thanks
Awesome video. I love tstak`s
You should do a tool trailer tour for us.
Thanx keep up the good work.
Daniel Lopez oh it’s coming 😊 thanks for watching!
Can you do a video of your entire tstak collection? I'd love to see how you've organized/categorized items in all your boxes.
That’s a good idea. I’ll put it in my list of todo vids.
what about standard hand saws? do they fit?
Super helpful video, thank you. Do you happen to know if TSTAK is compatible with Huskey Connect?
no there not compatible. thanks for watching
did the foam inserts at 1:01 came with the case?
No, the foam insert is sold separately
@@hammerandhome gotcha. wanted to ask, would you know where i can get foam for the tstak series?
@@mdmamusicproduction here you go! amzn.to/3CWIrcX
@@hammerandhome thanks, too kind
@@mdmamusicproduction you’re welcome,👍
great video, good job! subbed!
Great to hear, thanks!
Hello question for you, do you find the DeWalt tstak to be much stronger than the Craftsman versa stack? And do you think the bottom rolling box from versastack is smaller than the DeWalt tstak or Stanley?
When DeWalt isnt enough. Its bigger brother MAC will always be there (at great expence) to CRUSH the task! Mac Dewalt B&D Stanley all a family.
Where can I find that foam for the box? I have the 2.0.
Hey buddy, check out these links -
Amazon USA: amzn.to/391HCBv
Amazon Canada: amzn.to/3izSDx5
Acme tools also
hey brad.. which system/storage options would you recommend to a painter with a pickup truck?.. been racking my brain over it for awhile..i have tough system but i can only find the middle box works good for drywall..i do have sherwin williams bags (which have been good) but going to try the dewalt 4 in one mobile box.. ive tried packout twice but i couldn’t find a way to work either (prob my OCD).. any suggestions?
I like packout because it’s water proof and they have lots of options for other cases, The problem is they are expensive. The new Toughbuilt boxes look really nice and are way cheaper. I don’t like the dewalt system at all. To much work to connect them together. The tstak system is great but not waterproof, unless they changed. When I was working outside a lot I was happy using the packout system, not having to pull my trailer around was nice for a change. It’s definitely a hard decision to make because once you start buying boxes you are set in that brand. Packout does make a massive box that works for larger tools. But it can get really heavy. Hope my thoughts helped a bit. Best of luck! Let me know what you go with👊
@@hammerandhomethanks Brad.. always appreciate your insight and quick response.. overall i think it’s a good problem to have lol..i was looking into toughbuilt also.. thinking about waiting till spring/summer with their new additions etc.. keep up the good videos!
The single drawer with the multitool in it, what keeps the drawer from sliding open if you tilt it?
it has a latch inside. it won't come open on its own
@@hammerandhome Thank's. I just ordered the Stanley, here in Europe u save a little over 10€, same goes for the Stanley foam inlay. Edit: I just wish it was the Toughsystem 2.0 but it's hard to find here in EU and the cost more than dubble. The new locks seems way smarter, but with all the boxes u have it will cost a small fortune to change them out for the new 2.0 i guess
@@bahionic that’s very true. I really like the size of the t stak boxes. They are just the right size and don’t get to heavy. However.. I’m really liking the Milwaukee pack out system and all the options they have. DEWALT doesn’t come close to as good of a system. But they are expensive. I’ll be doing a video on them soon.
I am still waiting for you to comment back about the boxes
Thank you for the video! 👏
I have the Ridgid system idk what they call it but I stopped using it because I found it annoying to have open and close the cases. Also I hated it when I needed a tool in the bottom case. taking apart the system to get one tool, no thanks lol. I then Built my Own tool cases which for me anytime you custom build something for your needs will always be better than what a company builds for the masses. Thanks for another great video 😊
I know exactly what you mean. I debated for a long time about building my own cases then I took the plunge and it was too late to go back 😬. For me having so many guys working with me I have to keep all my tools organized otherwise they go missing pretty fast. Thanks for watching craftman
@@hammerandhome it makes sense for a guy with lots of employees too get into these tool box systems for sure.
I found that the T-Stak single-drawer units solve those problems for me. I combine those with two-drawer units, and then the only top-opening box in a stack will be one of their deep ones, which I put at the top.
James Rodgers sounds like a good setup. 👍
@@jamesrodgers3132 I do like the drawer T-stak that definitely makes sense.
What’s the serial number on the plumbing box?
Here's the amazon link with the serial number: amzn.to/3j2Xk1o
Do you ever get toughsystem envy?
Never, I have the 1.0 tough system, I decided to go Milwaukee Pack out instead of Dewalt 2.0.
Hi Brad,
Pretty cool...
Can’t believe no one in the comments is suggesting you go with Milwaukee pack outs. The aftermarket modifications are off the hook.
Have you tried the tough system? I am about to finally get into that mostly because it is waterproof/ water resistant. Lol
Mark Gross I haven’t bought any of the tough system. I love the wall mount system they have. My only issue is they are two big for individual tools. And when you load them up they get pretty heavy. Tstak for me is better because of the size. I do wish they where built a bit stronger. Thanks for watching
They should make an adaptor so the tstak & tough system can clip together.its also annoying that tstak has slightly more depth so the trays won't fit in a tough system box.
@C W what did the spherical speaker enclosures sound like B&W use them with top tweeter enclosures.ive fancied having a play at a epoxy resin speaker enclosures
@C W I'm looking at an open baffle type build !not sure I'm upto spherical just yet.lol.but its interesting
Dang, stop tossing out those tool caddies. Next time send one my way!
I am from Brazil, congrats for vídeo.
Thank you
Where did you get the foam inserts from
Martin Rodriguez I bought them on amazon, there’s a link to the tstak below the video. Once on amazon scroll down and there is a deal on right now for $14 US. Thanks for watching!
Seems like t stak been around a while. I’m just finding out about them and Versa. Any info or rumors on them coming out with the next model. Like am I buying at the wrong time. Also, I went to the farm ranch store today and they have tons of t stak. Their side clips look like yiur t stak clips. U said the new ones look more like the fat max side clips. Is my store running old model. Thx! Any info would be helpful. Not that this is life or death for me but I’m not a huge company or anything, just trying to invest what for me is a ton of money and yiur vid is super helpful. Thx! Do U have more t stak vids. Send em to me in reply on comment if u do. I quickly scanned yiur vids and didn’t see any. Then I started typing and now it doesn’t let me check yiur to tube site while typing or it deletes my text. Thanks again
T stak 2.0 is out in UK, not sure if it's coming to USA. Basically better clips and a ip54 (I believe might be better than 54)seal on the boxes.
@@TheFazer1992 interesting, on their tough system 2.0 they also improved the clips. Have not heard about the tstak 2.0
Can I have a tray that you tossed out 😂
Sorry it’s in the trash ☹️
I still can't justify getting the radio as nice as it would be for work. Feel it's way over priced. Also if you want to convert a box you can pick up a 2 inch noco power inlet-adapter, drill a hole and mount it with a few screws. Mount your chargers, can even get mounts off Amazon to secure your batteries
nice tip! cheers
Posted 2 years ago......I'm guessing it's too late to ask you to send me those insert trays you don't want!!
Lol, yeah they gone.
@@hammerandhome lol.....that's cool. I completely disassembled a used bandsaw I bought so I could thoroughly clean and repaint the individual parts (I'm refurbishing it). All the screw nuts, bolts, washers, knobs and springs from the saw are currently soaking in light oil inside those insert trays to keep 'em from rusting.
Хороший обзор! Спасибо!
that table needs a coat
it sure does! thx for watching
The Dewalt are cheaper and stronger than the Festool Systainers. I couldn't justify the price of the
Festool either. Some people think that because they are more expensive, they must be better, but no.
Of course you will have the fanboys that will cry for Festool, lmao.
exactly! they are just boxes to carry our tools and help keep us organized, spending half our wages on boxes doesn't make sense to me.
Just a show off...
Little flexing never hurt 😂