For those who are having trouble mapping the accelerator and brake triggers on Dual Shock and Dual Sense controllers, download the x360ce controller emulator and place it in the emulator folder. Map buttons on x360ce and enable X360 controller support and also remap buttons on emulator. If the emulator does not recognize it, check the x360ce Issues tab to install missing files. I did that and it worked. Sorry for my English, I used Google translate
Thank you so much, mate! You're a F**** hero! I couldn't get past the network screen. You got my sub I'm now playing with a T300, TH8A shifter but the Nebula version I'm using (dl from segaretro) didn't like 6 XInput devices and had to reach for my old pedal set (not a problem since I suspect Daytona wouldn't benefit from a load cell pedals). The FFB settings in the ini file don't work properly so I suggest enabling auto-center by the wheel to about 10% in the driver settings. You might wanna try a higher value on a Logitech wheel since it's much weaker. Edit: I had to invert controls for accel and brake using a T3PA. Just pay attention at max and min values when the pedals are fully pressed. Edit2: If you're using a shifter like TH8A you may experiment with the Neutral position a little. I have a short throw mod installed but the stock one has a really long throw. The mod I have is just a nylon 3D printed H-gate that goes beneath the stock metal plate if anyone asks.
So when trying to configure the controls to my Logitech dual action and basic gamepad controllers, the only options I had for steering, accelerating, and breaking were axes on the d-pad, when I really want to assign acceleration and breaking to buttons.
Hi, thanks for the video. I'm trying to use a PS4 controller with the game, but at first couldn't assign accelerate or brake to the triggers. I altered the .ini file, and now I am able to select them in the drop down. But unfortunately, my Coin 1 & start buttons have changed. Now when I try to double-click on them to reassign them, the emulator freezes and crashes. Can you suggest any help?
@@AnthroArcade If the Xinput line is changed from a 0 to 1, the emulator recognises gamepads, whereas before it would only see the PC keyboard or basic joypad controls. Now it sees the controller as a proper analogue device, but it freezes whenever I try to double click on any of the options.
@@AnthroArcade I'm trying to use a PS3 controller with the PC. It works fine with the standard emulator settings (not XInput), but I have to map the L&R shoulder buttons as accelerate and brake, as there is no analogue control. It allows the left stick to act as analogue steering though. But when I activate the XIput (change from 0 to 1) in the .ini file, the emulator gives me more analogue options (L&R triggers), but the controller is apparently not detected by the emulator anymore. The PC keyboard keys can be used, but not the controller. This goes for any game. Could it be the fact that I'm using an PS3 controller and not an Xbox one? I have an Xbox 360 controller, but I can't connect it to the PC.
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
For those who are having trouble mapping the accelerator and brake triggers on Dual Shock and Dual Sense controllers, download the x360ce controller emulator and place it in the emulator folder. Map buttons on x360ce and enable X360 controller support and also remap buttons on emulator. If the emulator does not recognize it, check the x360ce Issues tab to install missing files. I did that and it worked. Sorry for my English, I used Google translate
I found your tutorial an hour after I needed it LOL
It's a shame the developer of this emulator dissapeared. Always open-source your emulators!
Very true! There's some interesting emulators (like Model 3) that kinda just got left on the wayside due to this.
_Razzle Joestar_
Thank you so much, mate! You're a F**** hero! I couldn't get past the network screen. You got my sub
I'm now playing with a T300, TH8A shifter but the Nebula version I'm using (dl from segaretro) didn't like 6 XInput devices and had to reach for my old pedal set (not a problem since I suspect Daytona wouldn't benefit from a load cell pedals).
The FFB settings in the ini file don't work properly so I suggest enabling auto-center by the wheel to about 10% in the driver settings. You might wanna try a higher value on a Logitech wheel since it's much weaker.
Edit: I had to invert controls for accel and brake using a T3PA. Just pay attention at max and min values when the pedals are fully pressed.
Edit2: If you're using a shifter like TH8A you may experiment with the Neutral position a little. I have a short throw mod installed but the stock one has a really long throw. The mod I have is just a nylon 3D printed H-gate that goes beneath the stock metal plate if anyone asks.
Cool, didn't know how to fix that thanks. Recently setup this emulator, a bit clunkier than the more mainstream ones.
Thank you, It's work!
So when trying to configure the controls to my Logitech dual action and basic gamepad controllers, the only options I had for steering, accelerating, and breaking were axes on the d-pad, when I really want to assign acceleration and breaking to buttons.
thx!
Someone posted recently a build which lets you play daytona 2 PE playing netlink or online. Any Ideas how to set this up?
Hi, thanks for the video. I'm trying to use a PS4 controller with the game, but at first couldn't assign accelerate or brake to the triggers. I altered the .ini file, and now I am able to select them in the drop down. But unfortunately, my Coin 1 & start buttons have changed. Now when I try to double-click on them to reassign them, the emulator freezes and crashes. Can you suggest any help?
What did yoy change in the .ini file?
_Razzle Joestar_
@@AnthroArcade If the Xinput line is changed from a 0 to 1, the emulator recognises gamepads, whereas before it would only see the PC keyboard or basic joypad controls. Now it sees the controller as a proper analogue device, but it freezes whenever I try to double click on any of the options.
@@unkle73 can you modify the controls from within the .ini file?
_Razzle Joestar_
@@AnthroArcade Under "input" there's only the option to enter a 1 or 0 in the XInput line. No other options.
@@AnthroArcade I'm trying to use a PS3 controller with the PC. It works fine with the standard emulator settings (not XInput), but I have to map the L&R shoulder buttons as accelerate and brake, as there is no analogue control. It allows the left stick to act as analogue steering though.
But when I activate the XIput (change from 0 to 1) in the .ini file, the emulator gives me more analogue options (L&R triggers), but the controller is apparently not detected by the emulator anymore.
The PC keyboard keys can be used, but not the controller. This goes for any game.
Could it be the fact that I'm using an PS3 controller and not an Xbox one? I have an Xbox 360 controller, but I can't connect it to the PC.
how did u open the testmode ? when i played 'sega model 3 ui' i can't see that screen
F2 in the Nebula M2.
I can't understand what you said was the key to get into the menu. =(
F2
@@AnthroArcade Thanks.
@@AnthroArcade when I press f2 nothing happens I am using rocketlauncher to run the game btw
I don't like the turning in the arcade version
Try a cheap spring based self-centering wheel.