CNC Controllers Built Incorrectly (Volume 22)

This video covers TH-cam content creator/influencers who built CNC controllers on their channels that were built incorrectly either using incorrect components, missing proper grounding, using incorrect electronic enclosures, providing misinformation, or a combination of the above.
Please due your research before following any content creators video as the content they produce are for entertainment, and best practices are seldom followed, or understood.
If you have questions, or require quotes please message me direct at [e-mail] or through my eBay store here. www.ebay.com/s...
Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.
These are my new complete DS Flexion double shielded ultra flex cable motor kits including tool less mounted ground bus bar.
All required connectors are included, and all you require is solder, and flux which I can include as well. Let me know.
3 axis - 30’ - www.ebay.com/i...
3 axis - 45’ - www.ebay.com/i...
3 axis - 60’ - www.ebay.com/i...
3 axis - 75’ - www.ebay.com/i...
3 axis - 90’ - www.ebay.com/i...
4 axis - 40’ - www.ebay.com/i...
4 axis - 60’ - www.ebay.com/i...
4 axis - 80’ - www.ebay.com/i...
4 axis - 100’ - www.ebay.com/i...
4 axis - 120’ - www.ebay.com/i...
Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H www.ebay.com/i...
CNC Ground Buss Bar System Complete With SC25-8 Terminals And 2Ft. Ground Strap www.ebay.com/i...
CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Here's a link to my Ethernet Smooth Stepper turnkey package www.ebay.com/i...
Here's a link to my UC-400 Ethernet Turnkey Controller package www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/i...
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/i...
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/i...
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/i...
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/i...
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/i...
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/i...
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/i...
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/i...
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/i...
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology

[@odin823]

let me qualify this statement, "there is nothing wrong with using an USB controller board with your robot". as long as you are comfortable with unreliable components. and for testing purposes, go nuts. but, if you want a stable robot, listen to what vince says. he knows what he is talking about. and listen, this is free information. good information that vince has the experience to justify what he is telling you. thanks vince.WHY NOT JUST USE THE CORRECT WIRES? he has the wire?

[@corvetteguy50]

Thank you for your support.
Let me elaborate on what you typed.
Any system using a USB motion controller is unreliable in terms of stability for production.
The term testing needs to be defined carefully as many will get the wrong idea.
Testing is only applicable in seeing if the robot provides actual motion to verify the axes direction are set in the correct direction for example.
Testing DOESN'T mean attempting to cut any substrates.
Thank you,
Vince

[@johnross3752]

What do you think about putting the power supply in it's own mettle case, separate from the electronics in it's own mettle case , kind of like a Russian Doll idea.

[@corvetteguy50]

Thank you John as always for your support. Its fine to do, but it actually costs more as end users have to buy the enclosure, machine it, and then install proper cooling. Its usually more cost effective to just mount the VFD at least 5ft from the CNC chassis.
The more distance the better.
Thank you,
Vince

[@LIMoto-oh5tx]

you mention ferrite a few times, in a typical cnc control box using individual drives where would be the proper placement of the ferrite

[@corvetteguy50]

Thank you for your support. Ferrite placement is based on where the end user intends to provide filtering for their signals. This is illustrated in my overview video here of a build I did for client. th-cam.com/video/Hik7SlkX5Is/w-d-xo.html Thank you,
Vince

[@odin823]

@@corvetteguy50 as you have stated in previous videos, llncoln electric has some amazing documentation related to this topic. www.flashcutcnc.com/wp-content/uploads/2024/03/Grounding-Best-Practices.pdf, but this was the first document i came up with, with a simple google search.