Informative video. You can also show how to control the relay. What is the maximum power the relay can withstand? Can I connect a vacuum cleaner to it?
very good, is the schematic available for the main board? or at least a picture for it, i smoked main resistors on the main board and I cant find out their value, on email they are not responding, plz help, thanks
@@huanyanginverter6516 i just got your email reply now, will send you right away, thank you very much for the reminder, never saw your first reply unless now
Hello. An error has appeared on the E.oCH inverter. What does this error mean and how can I fix it? I do not understand what is wrong, everything worked for almost a year.
@@huanyanginverter6516 Did I set the wrong motor current in the settings? Auto tuning of engine parameters will help solve this problem? Thanks for the tip.
@@huanyanginverter6516 Hey. There is a problem with the relay. TB-TC contacts are normally closed. When the spindle starts, they open. It's good. TA-TC contacts are normally open. When the spindle starts, they do not close. They must be locked. What is the problem?
Thanks you for your answer but this video's not the good one . My HY serial finish by d223b -2.2kw-220v Its been 3-4days i try to make it work on my NcStudio software but it wont work ,i think my wired are good ....GCM-s,m,fspeed but with the set-up PD00ect...i have try dont work So if you can send me the programmation for all the PD i need for NcStudio you'll be realy helpfully ! Thanks ! If this video was for me i will find it realy useful .
![[ไฮไลต์] แบดมินตันชาย วิว กุลวุฒิ (ไทย) vs LEE Zii Jia (มาเลเซีย) รอบรองชนะเลิศ | โอลิมปิก 2024](http://i.ytimg.com/vi/mvBiEAqlssw/mqdefault.jpg)
已按讚👍
Grbl_ESP32 now supports the P2 series inverter through RS485.
OK usable
Informative video. You can also show how to control the relay. What is the maximum power the relay can withstand? Can I connect a vacuum cleaner to it?
Can only drive three-phase motors
very good, is the schematic available for the main board? or at least a picture for it, i smoked main resistors on the main board and I cant find out their value, on email they are not responding, plz help, thanks
xwdnzyp@163.com you send me an email,
I did not receive your email
i can't reach you
@@huanyanginverter6516 i just got your email reply now, will send you right away, thank you very much for the reminder, never saw your first reply unless now
@@huanyanginverter6516 email sent
Hello. An error has appeared on the E.oCH inverter. What does this error mean and how can I fix it? I do not understand what is wrong, everything worked for almost a year.
This is an alarm for excessive current.
@@huanyanginverter6516 Did I set the wrong motor current in the settings? Auto tuning of engine parameters will help solve this problem? Thanks for the tip.
@@huanyanginverter6516 Excessive current _where_? I also get this error.
@@stefandebruijn3167 You take a video and send it to me Email：xwdnzyp@163.com
@@kestiboy2241 You take a video of the process and let me watch email：xwdnzyp@163.com
resistor 2W, 5k ok?
OK
@@huanyanginverter6516 Hey. There is a problem with the relay. TB-TC contacts are normally closed. When the spindle starts, they open. It's good. TA-TC contacts are normally open. When the spindle starts, they do not close. They must be locked. What is the problem?
Thanks you for your answer but this video's not the good one . My HY serial finish by d223b -2.2kw-220v Its been 3-4days i try to make it work on my NcStudio software but it wont work ,i think my wired are good ....GCM-s,m,fspeed but with the set-up PD00ect...i have try dont work So if you can send me the programmation for all the PD i need for NcStudio you'll be realy helpfully ! Thanks ! If this video was for me i will find it realy useful .
th-cam.com/video/8mbLw3ytnFo/w-d-xo.html
th-cam.com/video/2VXMxxa6lXM/w-d-xo.html
th-cam.com/video/UxT2y8b_0SE/w-d-xo.html
@@huanyanginverter6516 do you know how with NcStudio ?
I find a way for 3speed .thats it ?
@@galichax999 There are up to eight speeds.
@@galichax999 I don't understand NcStudio? Send me the schematic