How to Replace the Timing Belt, Tensioner and Front Engine Seals on a B230F Engine (Volvo 240)

Support the Channel: / longbowmedia
How to Replace the Timing Belt, Tensioner, Camshaft Seal, Intermediate Shaft Seal and Crankshaft Seal on a B230F Engine (Volvo 240)
More tutorials: • TUTORIALS
www.longbowmedia.org

[@MrSorrycharlie]

Thank you for all the videos. My timing belt snapped, was expecting it eventually. Hasn't been replaced since previous owner in 2012. Probably 100k miles, service schedule is 50k.

[@MrSorrycharlie]

My harmonic balancer was bad, spinning two piece. The tensioner is possibly optional, and requires a 6" vice, no C clamps won't work. 1st attempt didn't work, took the belt off and turned the cam gear 360 degrees to fix. FYI mechanics

[@theredstormer8078]

My counter hold does not fit in the camshaft pulley. Why would you not break that bolt free BEFORE removing the lower pulley? I had to reassemble half of it because of this one step.

[@otiesdriftwood]

Got it off with a rope down the first spark plug

[@crika50]

Where can I find those strut tower braces and firewall braces?

[@Thomas-v7g8b]

I found them on ebay

[@otiesdriftwood]

Shiiiid

[@mysterisk3815]

How many washers do i need?

[@gregcameron6047]

Very good video, easy to follow. On the B230FX motor it does not use the standard belt, the belt has rounded teeth. Using the wrong belt will cause the belt to wear quickly.

[@LongbowMedia]

Good to know, thanks for the heads up!

[@Nicholas_Devine]

I hope your flame trap and crankcase breather box are good and clean otherwise you're going to be doing seals again.

[@LongbowMedia]

Indeed it has! :-)

[@LouieLooping-ro8ww]

If the marks on the cam gear are slightly off, do you turn the gear once the old belt is off, before installing the new belt?

[@GTFan12]

Great Video! What tool did you use on the cam gear and to press the seal in?

[@kurrenkidd4089]

Did you ever find out?

[@joekickbush1768]

What are the drift tools you use and where do I find? Thanks.

[@LongbowMedia]

I think I got mine through local classifieds...You can use a PVC tube or large socket that matches the diameter of the seal as a drift tool as well.

[@EricLee-ku7cb]

Thanks a lot for the video, very informative!

[@LongbowMedia]

Happy that it helps! :-)

[@surfinbird208]

Just the video I’ve needed, been meaning to do this for a while now

[@LongbowMedia]

Now you have no excuse to put it off! haha.