Cool. I've never reused a valve, but...why not? I bought a bag of valves on eBay and have worked with the school and ball club to salvage over a dozen balls, saving hundreds of dollars.
Getting the valve out was really easy. It took me less than 2 minutes to get the whole thing out with a very small screwdriver... Replacing It is a different story...
Valve fallen inside basketball. I have done it. It took me an hour's work though!!! I made a 3 centimeter long cut on the side opposite to the valve and took the valve out. I repaired the cut using a piece 3x6cms of rubber from a bicycle inner tube which I glued inside using Gorilla Glue first one side and when set the other side. Then using a soldering gun and passing it a few times over the cut it was closed airtigt. Then I just inserted the valve in place and pumped the ball. Works fine, no air leaking at all.
Muhammad Rifan I'm not sure how to get the valve out. That has happened to me and I just left it in there. It rattles, but hardly bothers me. If i had to pull it out, I might try to grab it with some sort of hook and try to pull it back out of the hole.
I have done it. It took me an hour's work though!!! I made a 3 centimeter long cut on the side opposite to the valve and took the valve out. I repaired the cut using a piece 3x6cms of rubber from a bicycle inner tube which I glued inside using Gorilla Glue first one side and when set the other side. Then using a soldering gun and passing it a few times over the cut it was closed airtigt. Then I just inserted the valve in place and pumped the ball. Works fine, no air leaking at all.
Interesting. I've not found any that I haven't been able to replace, yet (i've only done volleyballs, though). I usually lube the valve a lil with saliva and push in with my nut driver. Some require a lil more effort, but they've all gone in for me.
I bought a mitre delta hyperseam ball and I tried to inflate it today using an air compressor and then something popped inside. So when you inflate the ball it quickly deflates through the valve hole. The outer material of the ball seems fine so not sure if the valve hole is broken or something inside the ball and if it can be fixed
I have a football that I did this method with. Only problem is, the valves keep going inside the ball. Any idea why this is happening? And what can I do to get the valve to stay in place?
@@deasttn I installed the exact valve shown in the video. The original valve got pushed inside the football and I couldn't get it out. I'm guessing I'll need a new bladder at this point. The football is pretty special to me. I've contacted Wilson about this, as the ball is an official NFL game ball. I'm hoping they'll be able to help me out. I'll let you know how it goes.
@@rokstar807 best of luck. You might be able to buy a cheap football and remove it's bladder and insert that into your good ball? Footballs have laces that you can untie. I've never done that, but there's probably another TH-cam video on how to do it?
When we use rubber band method. And I know it works but if after some time the air gets leaked so how to pump the ball again. We need to remove the old rubber or not. Please reply.
Khan Amjad I don't understand your question, but I'd try to inject an egg white to seal small leaks. Not all leaks can be repaired and you might have to pump up the ball before every use.
@@deasttn sir please send that screw driver link sir in Amazon or any other site. I will.buy through your website sir.. sir inam waiting for your reply sir...
@@krishnasaisandeep no can do. It's a simple screwdriver hex tool #Aliexpress US $2.27 12%OFF | 3-11mm Metal Socket Driver Hex Nut Key Wrench Screwdriver Nutdriver Hand Tool a.aliexpress.com/_dVM8dXl
Same question. Really hard to find valves in stores or online. I took out from an old ball that wasn't working and put it into the one I needed to fix.
Replacement valves for footballs, basketballs, soccer balls, volley balls... can be purchased here: stores.ebay.com/shelbycoinscollectibles/Rubber-Ball-Infation-Valves-/_i.html?_fsub=11988348015
I presume you are asking about a valve that may have fallen into the ball? If so, I'm not sure how to get the valve out. That has happened to me and I just left it in there. It rattles, but hardly bothers me. If i had to pull it out, I might try to grab it with some sort of hook and try to pull it back out of the hole.
Thanks man. I like the fact that you used tools that I can readily find at home
I'm just a regular guy, so I only have regular tools. Take care.
Wow that's cool that you did it so easy. I'm surprised that the valve isn't glued inside. Thank you for making such a nice video.
Thank you man! My old Adidas Roteiro match ball is now working again. Valve is from a dead Nike Ball ;-P
Cool. I've never reused a valve, but...why not?
I bought a bag of valves on eBay and have worked with the school and ball club to salvage over a dozen balls, saving hundreds of dollars.
Getting the valve out was really easy. It took me less than 2 minutes to get the whole thing out with a very small screwdriver... Replacing It is a different story...
Valve fallen inside basketball.
I have done it. It took me an hour's work though!!!
I made a 3 centimeter long cut on the side opposite to the valve and took the valve out.
I repaired the cut using a piece 3x6cms of rubber from a bicycle inner tube which I glued inside using Gorilla Glue first one side and when set the other side.
Then using a soldering gun and passing it a few times over the cut it was closed airtigt.
Then I just inserted the valve in place and pumped the ball. Works fine, no air leaking at all.
Nice job. Glad to hear that you figured it out
Plzz tell me How to do
My valve got inside the ball how do I get it out
Muhammad Rifan I'm not sure how to get the valve out. That has happened to me and I just left it in there. It rattles, but hardly bothers me.
If i had to pull it out, I might try to grab it with some sort of hook and try to pull it back out of the hole.
I have done it. It took me an hour's work though!!!
I made a 3 centimeter long cut on the side opposite to the valve and took the valve out.
I repaired the cut using a piece 3x6cms of rubber from a bicycle inner tube which I glued inside using Gorilla Glue first one side and when set the other side.
Then using a soldering gun and passing it a few times over the cut it was closed airtigt.
Then I just inserted the valve in place and pumped the ball. Works fine, no air leaking at all.
@@michaillombardeas1893 Hy bruh
@@michaillombardeas1893 can it be done to basketball also?
@@k8win487 Of course you can
Thank for this🎉
Where to purchase this valve??
Is we can not but valve from any shop plzz reply sir?
I bought the valves on ebay usa
@@deasttn I am From India
@@deasttn My Valve Was Gone Inside The Ball How Can I Pull It Out
@@deasttn we Can buy It From Any ShOp
@@squad7775 you probably can't pull it out. I have one like that, too
Great technique !But for now I hav a diffrnt problem,the pin through which air is pumped broke and is now stuck in the valve! PLEASE HELP ME !!?😥😫
Try to dig it out. The top of the valve does not block the air, so it's ok if the top gets damaged.
I tried doing this, but some balls have such a small opening its impossible to get the new valve in.
Interesting. I've not found any that I haven't been able to replace, yet (i've only done volleyballs, though). I usually lube the valve a lil with saliva and push in with my nut driver. Some require a lil more effort, but they've all gone in for me.
I don't see eBay page in the link
I bought a mitre delta hyperseam ball and I tried to inflate it today using an air compressor and then something popped inside. So when you inflate the ball it quickly deflates through the valve hole. The outer material of the ball seems fine so not sure if the valve hole is broken or something inside the ball and if it can be fixed
Did you end up fixing it?
My valve thingy pushed in when I tried pumping it
Are all valves on different brands the same?
I'm not sure. I have only one type of valve
I have a football that I did this method with. Only problem is, the valves keep going inside the ball. Any idea why this is happening? And what can I do to get the valve to stay in place?
Unfortunately I do not know.
What did the old football valve look like? Are you installing a new one that is similar to the old one?
@@deasttn I installed the exact valve shown in the video. The original valve got pushed inside the football and I couldn't get it out. I'm guessing I'll need a new bladder at this point. The football is pretty special to me. I've contacted Wilson about this, as the ball is an official NFL game ball. I'm hoping they'll be able to help me out. I'll let you know how it goes.
@@rokstar807 best of luck.
You might be able to buy a cheap football and remove it's bladder and insert that into your good ball?
Footballs have laces that you can untie. I've never done that, but there's probably another TH-cam video on how to do it?
Bro where we get this type of valves ??
I found em on eBay (USA)
I want to buy a new air valve can u please give me link
Bhai valve mila
@@toxico_god1605mujhe bhi chahiye bhai par india me milti hi nhi
In my football the air leaked from where i pump the ball or air entering side in bladder. How to fixed it
Akash Sonowal have you tried to inject egg white into your ball? Ive had good luck sealing small leaks by injecting egg whites.
@@deasttn but what if the egg white rots. I mean is it good for the Ball?
@@DG8o the ball will be fine when the egg rots.
It's really good 👍😊
Hllo when I was pumping my puma football suddenly the air inside was drained and then it is not pumping air how can I solve this
Psycho, have you located the spot of leak?
Fill a bucket of water and submerge the ball to locate the leak.
@@deasttn no leak in the ball the valve got inside the ball
@@psychogamer5573 you'll probably need to get a new valve and that old one will rattle inside the ball. I got some on ebay.
@@deasttn ok my ball is puma final 6
ok any special valve for puma
How to get this valve
When we use rubber band method. And I know it works but if after some time the air gets leaked so how to pump the ball again. We need to remove the old rubber or not. Please reply.
Khan Amjad I don't understand your question, but I'd try to inject an egg white to seal small leaks. Not all leaks can be repaired and you might have to pump up the ball before every use.
Very helpful video ,now I can fit valve easily
Good to hear. Best of luck to you.
Can you tell me if i can buy new Valve from somewhere ..
I found some on ebay.
What country are you in?
@@deasttn INDIA
@@_danav I'm in USA and found some on ebay
My football air inlet valve fall into football inside blader how to fix 🔨🔧 this problem but not puncture or leaked valve
I'm not sure.
Perhaps you can fashion a hook and pull it out?
Bro where we buy that screw driver bro to put the valve. Please reply me bro..
It's an inexpensive hex socket driver.
You can find them practically anywhere.
@@deasttn sir please send that screw driver link sir in Amazon or any other site. I will.buy through your website sir.. sir inam waiting for your reply sir...
@@krishnasaisandeep no can do.
It's a simple screwdriver hex tool
#Aliexpress US $2.27 12%OFF | 3-11mm Metal Socket Driver Hex Nut Key Wrench Screwdriver Nutdriver Hand Tool
a.aliexpress.com/_dVM8dXl
Bro valves kha se mila??
Where can i get a new air valve
Shyam Sk I bought mine on ebay
I typed for air valve in ebay it isn't there... where can i get it please tell me
Are you in USA?
Try to search ebay for: replacement valves footballs. I think the seller that i purchased from is: tammij2010
No bro im in india ?? Can i get it??
@@shyam524 I'm not sure where to find valves in India.
A fellow TH-camr said he salvaged a valve from an old ball and was able to reuse it.
Does this work for nivia spikester pls tell me
I'm not sure about that specific ball. Sorry.
My vavlve broke and went inside
@@YknCastaneda it won't hurt the ball to leave it inside, but you might want to try to pull it out with some needle nose pliers
Would a crochet hook work? Also, does any valve fit? Im using an mva200 mikasa volleyball
I've only seen one size valve, so I'd say it would work.
A crochet hook would probably work. Needle nose pliers also work.
@@deasttn thanks for the reply
Where we get these valves
Same question. Really hard to find valves in stores or online. I took out from an old ball that wasn't working and put it into the one I needed to fix.
Brother my valve is blocked and the air is not filling what should i do please help me its important for me😔😔
Unblock it with a something longer....maybe try a paperclip?
@@deasttn thank you brother
Vah kaun sa Pina hai
¿ Y COMO PERFORAS LA VÁVULA NUEVA, CON LA MISMA AGUJA DEL INFLADOR ?
Me No hablo Español
Great Ingenuity!!!
Thanks brother ❤
Give me link in volliball valve
Replacement valves for footballs, basketballs, soccer balls, volley balls... can be purchased here: stores.ebay.com/shelbycoinscollectibles/Rubber-Ball-Infation-Valves-/_i.html?_fsub=11988348015
hello do you know where I can find the valves?
Gianpaolo Abagnale i bought them online (ebay).
does this work on soccer balls?
I would think so
Bro while playing my footballs valve got removed and got lost in ground only what to do my balls name is rabona pro 😔😔please help me bro
Bro where do I get football valve aa
I found some on ebay usa
Thank you for this video
Hi where do I buy a new valve
I bought mine on eBay.
@@deasttn okay thanks
thanks bro
Thank you brother
Hai do you repair my football
THANK YOU BIG BOY
Tools name
Booking Ela cheyali
I got a nfl ball and I don’t know how to put the Volve in it
Follow the same directions that I show for a volleyball
Hello bro I am sharath from India can u pls let me know where the valve is provided in india
I'm not sure. I found some in USA on ebay
Iam also Indian
You can find it online
@@red_bunny_gamedev. link bhej do bro
@@nayan.r2630 bro isse acha ek naya boll lelo
@@red_bunny_gamedev. nhi bro parents ko force krke ek acha sa ball liya tha vo bhi 3 din badh ese ho gya
Thanks a lot sir, I need some valve, can you give me?
I will, but you'll need to send me a self stamped envelope to cover postage .
One of the other viewers made has some.
Please repairs my new ball
I have the same volly ball
They are good volleyballs and definitely worth the attempt to save them.
My valve gone inside what I can do
Not much. Live with it
@@deasttn didn't understand
@@deasttn how can I replace valve
@@villageboy6912 if the valve went inside, you can't remove it.
thanks 🙏🏻
Could i get a valve?
I bought some in eBay
@@deasttn you may please shear item name or link of wender
I need some valve, can you give me?
I bought them online. Ebay USA
@@deasttn how much Rs for each valve?
@@senthilkumar3512 I'm in USA and can't ship overseas
How to repair Shape out ball
I don't know how to do that
Thnx broo
That ball didn’t look flat at all! Why did you replace the valve? You could’ve used it!
It leaked air and needed replacing. I have more information about that ball than you.
@@deasttn oh yeah? It didn’t need replacing! It just leaked so what.
@@Ash-zp7ey a ball that leaks air is not valuable to me.
Best of luck
Valve kajal milega
My valve is not getting inside
Try to moisten it first.
I'm no able to repair my basketball valve
Putu Toshi you can always try one of those car tire plugs. If you use a lot of rubber cement, it might self seal after you fill with air.
Sorry to hear that you can't repair your basketball valve. I've not had 100% success, either (some still have leaks along the seams).
How about a mislocated air valve?
I presume you are asking about a valve that may have fallen into the ball? If so, I'm not sure how to get the valve out. That has happened to me and I just left it in there. It rattles, but hardly bothers me.
If i had to pull it out, I might try to grab it with some sort of hook and try to pull it back out of the hole.
I'm here in 2022 if I give air to my football it again punchture
Good luck
Where iget air valve pls any body have sent me
Hi
However
Uska naam batao
Grasa oe
小學鳮技術
Maut booking house
Uu
the video showed 4 tries before success removing the old valve. Edit the video down...
No. Im keeping it real. One take.
Good luck fixing your ball.
Hoax
Where can i get that valve
I bought some ebay USA